* testing release-2011.03 failure @ 2011-02-14 23:33 Gary Thomas 2011-02-15 16:53 ` Tom Rini 0 siblings, 1 reply; 5+ messages in thread From: Gary Thomas @ 2011-02-14 23:33 UTC (permalink / raw) To: openembedded-devel MACHINE = beagleboard DISTRO = angstrom-2010.x PARALLEL_MAKE ?= "-j4" BB_NUMBER_THREADS ?= "4" target = angstrom-gnome-image bitbake = 1.11.0 host = Fedora 13/x86 openembedded/recipes/gnome/system-tools-backends_2.10.1.bb failed Log at http://pastebin.com/rL0BnD8w -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: testing release-2011.03 failure 2011-02-14 23:33 testing release-2011.03 failure Gary Thomas @ 2011-02-15 16:53 ` Tom Rini 2011-02-15 17:25 ` Gary Thomas 0 siblings, 1 reply; 5+ messages in thread From: Tom Rini @ 2011-02-15 16:53 UTC (permalink / raw) To: openembedded-devel On 02/14/2011 04:33 PM, Gary Thomas wrote: > MACHINE = beagleboard > DISTRO = angstrom-2010.x > PARALLEL_MAKE ?= "-j4" > BB_NUMBER_THREADS ?= "4" > target = angstrom-gnome-image > bitbake = 1.11.0 > host = Fedora 13/x86 > > openembedded/recipes/gnome/system-tools-backends_2.10.1.bb failed > > Log at http://pastebin.com/rL0BnD8w Can you try adding PARALLEL_MAKE = "" to the offending recipe? -- Tom Rini Mentor Graphics Corporation ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: testing release-2011.03 failure 2011-02-15 16:53 ` Tom Rini @ 2011-02-15 17:25 ` Gary Thomas 2011-02-15 17:40 ` Tom Rini 0 siblings, 1 reply; 5+ messages in thread From: Gary Thomas @ 2011-02-15 17:25 UTC (permalink / raw) To: openembedded-devel On 02/15/2011 09:53 AM, Tom Rini wrote: > On 02/14/2011 04:33 PM, Gary Thomas wrote: >> MACHINE = beagleboard >> DISTRO = angstrom-2010.x >> PARALLEL_MAKE ?= "-j4" >> BB_NUMBER_THREADS ?= "4" >> target = angstrom-gnome-image >> bitbake = 1.11.0 >> host = Fedora 13/x86 >> >> openembedded/recipes/gnome/system-tools-backends_2.10.1.bb failed >> >> Log at http://pastebin.com/rL0BnD8w > > Can you try adding PARALLEL_MAKE = "" to the offending recipe? Still errors, but maybe more readable: | Making all in services | make[2]: Entering directory `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/services' | cd .. && \ | /bin/sh /work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/missing --run automake-1.7 --gnu services/Makefile | configure.in:8: version mismatch. This is Automake 1.7.9, | configure.in:8: but the definition used by this AM_INIT_AUTOMAKE | configure.in:8: comes from Automake 1.11.1. You should recreate | configure.in:8: aclocal.m4 with aclocal and run automake again. | make[2]: *** [Makefile.in] Error 1 | make[2]: Leaving directory `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/services' | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1' | make: *** [all] Error 2 -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: testing release-2011.03 failure 2011-02-15 17:25 ` Gary Thomas @ 2011-02-15 17:40 ` Tom Rini 2011-02-15 17:46 ` Koen Kooi 0 siblings, 1 reply; 5+ messages in thread From: Tom Rini @ 2011-02-15 17:40 UTC (permalink / raw) To: Gary Thomas; +Cc: Koen Kooi, openembedded-devel On 02/15/2011 10:25 AM, Gary Thomas wrote: > On 02/15/2011 09:53 AM, Tom Rini wrote: >> On 02/14/2011 04:33 PM, Gary Thomas wrote: >>> MACHINE = beagleboard >>> DISTRO = angstrom-2010.x >>> PARALLEL_MAKE ?= "-j4" >>> BB_NUMBER_THREADS ?= "4" >>> target = angstrom-gnome-image >>> bitbake = 1.11.0 >>> host = Fedora 13/x86 >>> >>> openembedded/recipes/gnome/system-tools-backends_2.10.1.bb failed >>> >>> Log at http://pastebin.com/rL0BnD8w >> >> Can you try adding PARALLEL_MAKE = "" to the offending recipe? > > Still errors, but maybe more readable: > > | Making all in services > | make[2]: Entering directory > `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/services' > > | cd .. && \ > | /bin/sh > /work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/missing > --run automake-1.7 --gnu services/Makefile > | configure.in:8: version mismatch. This is Automake 1.7.9, > | configure.in:8: but the definition used by this AM_INIT_AUTOMAKE > | configure.in:8: comes from Automake 1.11.1. You should recreate > | configure.in:8: aclocal.m4 with aclocal and run automake again. > | make[2]: *** [Makefile.in] Error 1 > | make[2]: Leaving directory > `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/services' > > | make[1]: *** [all-recursive] Error 1 > | make[1]: Leaving directory > `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1' > > | make: *** [all] Error 2 OK, digging into the history on this recipe, it looks like 29dc4e1f8452bba3af0ff91811d93bdb9f4f4f23 is when we switched from "pre-mangle configure.in, etc, then normal autotools.bbclass do_configure" to "less mangle, call out gnu-config, oe_runconf, etc by hand". Koen, do you recall why? And what heart burn we would run into if we wanted to both not re-break policykit support and fix this build issue by getting a more complete autotools.bbclass:do_configure type do_configure run here? -- Tom Rini Mentor Graphics Corporation ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: testing release-2011.03 failure 2011-02-15 17:40 ` Tom Rini @ 2011-02-15 17:46 ` Koen Kooi 0 siblings, 0 replies; 5+ messages in thread From: Koen Kooi @ 2011-02-15 17:46 UTC (permalink / raw) To: Tom Rini; +Cc: openembedded-devel 2011/2/15 Tom Rini <tom_rini@mentor.com> > On 02/15/2011 10:25 AM, Gary Thomas wrote: > >> On 02/15/2011 09:53 AM, Tom Rini wrote: >> >>> On 02/14/2011 04:33 PM, Gary Thomas wrote: >>> >>>> MACHINE = beagleboard >>>> DISTRO = angstrom-2010.x >>>> PARALLEL_MAKE ?= "-j4" >>>> BB_NUMBER_THREADS ?= "4" >>>> target = angstrom-gnome-image >>>> bitbake = 1.11.0 >>>> host = Fedora 13/x86 >>>> >>>> openembedded/recipes/gnome/system-tools-backends_2.10.1.bb failed >>>> >>>> Log at http://pastebin.com/rL0BnD8w >>>> >>> >>> Can you try adding PARALLEL_MAKE = "" to the offending recipe? >>> >> >> Still errors, but maybe more readable: >> >> | Making all in services >> | make[2]: Entering directory >> >> `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/services' >> >> | cd .. && \ >> | /bin/sh >> >> /work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/missing >> --run automake-1.7 --gnu services/Makefile >> | configure.in:8: version mismatch. This is Automake 1.7.9, >> | configure.in:8: but the definition used by this AM_INIT_AUTOMAKE >> | configure.in:8: comes from Automake 1.11.1. You should recreate >> | configure.in:8: aclocal.m4 with aclocal and run automake again. >> | make[2]: *** [Makefile.in] Error 1 >> | make[2]: Leaving directory >> >> `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1/services' >> >> | make[1]: *** [all-recursive] Error 1 >> | make[1]: Leaving directory >> >> `/work/local/Angstrom_BeagleBoard/tmp/work/armv7a-angstrom-linux-gnueabi/system-tools-backends-2.10.1-r1/system-tools-backends-2.10.1' >> >> | make: *** [all] Error 2 >> > > OK, digging into the history on this recipe, it looks like > 29dc4e1f8452bba3af0ff91811d93bdb9f4f4f23 is when we switched from > "pre-mangle configure.in, etc, then normal autotools.bbclass do_configure" > to "less mangle, call out gnu-config, oe_runconf, etc by hand". Koen, do > you recall why? And what heart burn we would run into if we wanted to both > not re-break policykit support and fix this build issue by getting a more > complete autotools.bbclass:do_configure type do_configure run here? > Save sysroot ipkg and target ipk, make change, rebuilt, compare ipks, easy enought to do :) Any volunteers? ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-02-15 17:48 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-02-14 23:33 testing release-2011.03 failure Gary Thomas 2011-02-15 16:53 ` Tom Rini 2011-02-15 17:25 ` Gary Thomas 2011-02-15 17:40 ` Tom Rini 2011-02-15 17:46 ` Koen Kooi
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.