From: Zdenek Kaspar <zkaspar82@gmail.com>
To: linux-raid@vger.kernel.org
Subject: Re: high throughput storage server?
Date: Tue, 15 Feb 2011 15:56:07 +0100 [thread overview]
Message-ID: <4D5A9407.5000508@gmail.com> (raw)
In-Reply-To: <AANLkTimT=JLvBTU52aZDYC5gwryXmsp4F+WbzsJNbSCC@mail.gmail.com>
Dne 15.2.2011 15:29, Roberto Spadim napsal(a):
> first, run memtest86 (if you use x86 cpu)
> check ram memory speed
> my hp (ml350g5 very old: 2005) get 2500MB/s (~20 Gbits/s)
>
> maybe ram is a bottleneck for 50gbits....
> you will need a multi computer raid or stripe fileaccess operations
> (database on one machine, s.o. on another...)
>
> for hobby = SATA2 disks, 50USD disks of 1TB 50MB/s
> the today state of art, in 'my world' is: http://www.ramsan.com/products/3
I doubt 20TB SLC which will survive huge abuse (writes) is low-cost
solution what OP wants to build himself..
or 20TB RAM omg..
Z.
next prev parent reply other threads:[~2011-02-15 14:56 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-14 23:59 high throughput storage server? Matt Garman
2011-02-15 2:06 ` Doug Dumitru
2011-02-15 4:44 ` Matt Garman
2011-02-15 5:49 ` hansbkk
2011-02-15 9:43 ` David Brown
2011-02-24 20:28 ` Matt Garman
2011-02-24 20:43 ` David Brown
2011-02-15 15:16 ` Joe Landman
2011-02-15 20:37 ` NeilBrown
2011-02-15 20:47 ` Joe Landman
2011-02-15 21:41 ` NeilBrown
2011-02-24 20:58 ` Matt Garman
2011-02-24 21:20 ` Joe Landman
2011-02-26 23:54 ` high throughput storage server? GPFS w/ 10GB/s throughput to the rescue Stan Hoeppner
2011-02-27 0:56 ` Joe Landman
2011-02-27 14:55 ` Stan Hoeppner
2011-03-12 22:49 ` Matt Garman
2011-02-27 21:30 ` high throughput storage server? Ed W
2011-02-28 15:46 ` Joe Landman
2011-02-28 23:14 ` Stan Hoeppner
2011-02-28 22:22 ` Stan Hoeppner
2011-03-02 3:44 ` Matt Garman
2011-03-02 4:20 ` Joe Landman
2011-03-02 7:10 ` Roberto Spadim
2011-03-02 19:03 ` Drew
2011-03-02 19:20 ` Roberto Spadim
2011-03-13 20:10 ` Christoph Hellwig
2011-03-14 12:27 ` Stan Hoeppner
2011-03-14 12:47 ` Christoph Hellwig
2011-03-18 13:16 ` Stan Hoeppner
2011-03-18 14:05 ` Christoph Hellwig
2011-03-18 15:43 ` Stan Hoeppner
2011-03-18 16:21 ` Roberto Spadim
2011-03-18 22:01 ` NeilBrown
2011-03-18 22:23 ` Roberto Spadim
2011-03-20 1:34 ` Stan Hoeppner
2011-03-20 3:41 ` NeilBrown
2011-03-20 5:32 ` Roberto Spadim
2011-03-20 23:22 ` Stan Hoeppner
2011-03-21 0:52 ` Roberto Spadim
2011-03-21 2:44 ` Keld Jørn Simonsen
2011-03-21 3:13 ` Roberto Spadim
2011-03-21 3:14 ` Roberto Spadim
2011-03-21 17:07 ` Stan Hoeppner
2011-03-21 14:18 ` Stan Hoeppner
2011-03-21 17:08 ` Roberto Spadim
2011-03-21 22:13 ` Keld Jørn Simonsen
2011-03-22 9:46 ` Robin Hill
2011-03-22 10:14 ` Keld Jørn Simonsen
2011-03-23 8:53 ` Stan Hoeppner
2011-03-23 15:57 ` Roberto Spadim
2011-03-23 16:19 ` Joe Landman
2011-03-24 8:05 ` Stan Hoeppner
2011-03-24 13:12 ` Joe Landman
2011-03-25 7:06 ` Stan Hoeppner
2011-03-24 17:07 ` Christoph Hellwig
2011-03-24 5:52 ` Stan Hoeppner
2011-03-24 6:33 ` NeilBrown
2011-03-24 8:07 ` Roberto Spadim
2011-03-24 8:31 ` Stan Hoeppner
2011-03-22 10:00 ` Stan Hoeppner
2011-03-22 11:01 ` Keld Jørn Simonsen
2011-02-15 12:29 ` Stan Hoeppner
2011-02-15 12:45 ` Roberto Spadim
2011-02-15 13:03 ` Roberto Spadim
2011-02-24 20:43 ` Matt Garman
2011-02-24 20:53 ` Zdenek Kaspar
2011-02-24 21:07 ` Joe Landman
2011-02-15 13:39 ` David Brown
2011-02-16 23:32 ` Stan Hoeppner
2011-02-17 0:00 ` Keld Jørn Simonsen
2011-02-17 0:19 ` Stan Hoeppner
2011-02-17 2:23 ` Roberto Spadim
2011-02-17 3:05 ` Stan Hoeppner
2011-02-17 0:26 ` David Brown
2011-02-17 0:45 ` Stan Hoeppner
2011-02-17 10:39 ` David Brown
2011-02-24 20:49 ` Matt Garman
2011-02-15 13:48 ` Zdenek Kaspar
2011-02-15 14:29 ` Roberto Spadim
2011-02-15 14:51 ` A. Krijgsman
2011-02-15 16:44 ` Roberto Spadim
2011-02-15 14:56 ` Zdenek Kaspar [this message]
2011-02-24 20:36 ` Matt Garman
2011-02-17 11:07 ` John Robinson
2011-02-17 13:36 ` Roberto Spadim
2011-02-17 13:54 ` Roberto Spadim
2011-02-17 21:47 ` Stan Hoeppner
2011-02-17 22:13 ` Joe Landman
2011-02-17 23:49 ` Stan Hoeppner
2011-02-18 0:06 ` Joe Landman
2011-02-18 3:48 ` Stan Hoeppner
2011-02-18 13:49 ` Mattias Wadenstein
2011-02-18 23:16 ` Stan Hoeppner
2011-02-21 10:25 ` Mattias Wadenstein
2011-02-21 21:51 ` Stan Hoeppner
2011-02-22 8:57 ` David Brown
2011-02-22 9:30 ` Mattias Wadenstein
2011-02-22 9:49 ` David Brown
2011-02-22 13:38 ` Stan Hoeppner
2011-02-22 14:18 ` David Brown
2011-02-23 5:52 ` Stan Hoeppner
2011-02-23 13:56 ` David Brown
2011-02-23 14:25 ` John Robinson
2011-02-23 15:15 ` David Brown
2011-02-23 23:14 ` Stan Hoeppner
2011-02-24 10:19 ` David Brown
2011-02-23 21:59 ` Stan Hoeppner
2011-02-23 23:43 ` John Robinson
2011-02-24 15:53 ` Stan Hoeppner
2011-02-23 21:11 ` Stan Hoeppner
2011-02-24 11:24 ` David Brown
2011-02-24 23:30 ` Stan Hoeppner
2011-02-25 8:20 ` David Brown
2011-02-19 0:24 ` Joe Landman
2011-02-21 10:04 ` Mattias Wadenstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5A9407.5000508@gmail.com \
--to=zkaspar82@gmail.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.