All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS
@ 2011-02-15 21:22 Timur Tabi
  2011-02-15 21:30 ` Wolfgang Denk
  0 siblings, 1 reply; 5+ messages in thread
From: Timur Tabi @ 2011-02-15 21:22 UTC (permalink / raw)
  To: u-boot

Clean up the macro defintions used to enable DIU (video) support on the
MPC8610HPCD and the MPC5121ADS so that they look more like the P1022DS,
which is newer.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 include/configs/MPC8610HPCD.h |   12 ++++--------
 include/configs/mpc5121ads.h  |    8 ++++----
 2 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 03ee394..d28e29b 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -21,12 +21,13 @@
 
 #define	CONFIG_SYS_TEXT_BASE	0xfff00000
 
-#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
 
 /* video */
-#undef CONFIG_VIDEO
+#undef CONFIG_FSL_DIU_FB
 
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x2c000)
+#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
@@ -88,8 +89,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
 #define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
 
-#define CONFIG_SYS_DIU_ADDR		(CONFIG_SYS_CCSRBAR+0x2c000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
@@ -494,9 +493,6 @@
 #define CONFIG_WATCHDOG			/* watchdog enabled */
 #define CONFIG_SYS_WATCHDOG_FREQ	5000	/* Feed interval, 5s */
 
-/*DIU Configuration*/
-#define DIU_CONNECT_TO_DVI		/* DIU controller connects to DVI encoder*/
-
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index f966325..72c8e3f 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -46,14 +46,15 @@
  */
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
-#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF00000
 
 /* video */
-#undef CONFIG_VIDEO
+#undef CONFIG_FSL_DIU_FB
 
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_IMMR + 0x2100)
+#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
@@ -74,7 +75,6 @@
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR		0x80000000
-#define CONFIG_SYS_DIU_ADDR		(CONFIG_SYS_IMMR+0x2100)
 
 #define CONFIG_SYS_MEMTEST_START	0x00200000      /* memtest region */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-- 
1.7.3.4

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [U-Boot] [PATCH] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS
  2011-02-15 21:22 [U-Boot] [PATCH] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS Timur Tabi
@ 2011-02-15 21:30 ` Wolfgang Denk
  2011-02-15 21:40   ` Timur Tabi
  0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Denk @ 2011-02-15 21:30 UTC (permalink / raw)
  To: u-boot

Dear Timur Tabi,

In message <1297804966-21532-1-git-send-email-timur@freescale.com> you wrote:
> Clean up the macro defintions used to enable DIU (video) support on the
> MPC8610HPCD and the MPC5121ADS so that they look more like the P1022DS,
> which is newer.
> 
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---
>  include/configs/MPC8610HPCD.h |   12 ++++--------
>  include/configs/mpc5121ads.h  |    8 ++++----
>  2 files changed, 8 insertions(+), 12 deletions(-)
> 
> diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
> index 03ee394..d28e29b 100644
> --- a/include/configs/MPC8610HPCD.h
> +++ b/include/configs/MPC8610HPCD.h
> @@ -21,12 +21,13 @@
>  
>  #define	CONFIG_SYS_TEXT_BASE	0xfff00000
>  
> -#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
>  
>  /* video */
> -#undef CONFIG_VIDEO
> +#undef CONFIG_FSL_DIU_FB

Please do not undef what is not defiend anyway.

...
> diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
> index f966325..72c8e3f 100644
> --- a/include/configs/mpc5121ads.h
> +++ b/include/configs/mpc5121ads.h
> @@ -46,14 +46,15 @@
>   */
>  #define CONFIG_E300		1	/* E300 Family */
>  #define CONFIG_MPC512X		1	/* MPC512X family */
> -#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
>  
>  #define	CONFIG_SYS_TEXT_BASE	0xFFF00000
>  
>  /* video */
> -#undef CONFIG_VIDEO
> +#undef CONFIG_FSL_DIU_FB

Ditto.

And please put the respective arch custodians on Cc:

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is common sense to take a method and try it. If it fails, admit it
frankly and try another. But above all, try something.
                                              - Franklin D. Roosevelt

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot] [PATCH] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS
  2011-02-15 21:30 ` Wolfgang Denk
@ 2011-02-15 21:40   ` Timur Tabi
  2011-02-15 21:55     ` Wolfgang Denk
  0 siblings, 1 reply; 5+ messages in thread
From: Timur Tabi @ 2011-02-15 21:40 UTC (permalink / raw)
  To: u-boot

Wolfgang Denk wrote:
>> > -#undef CONFIG_VIDEO
>> > +#undef CONFIG_FSL_DIU_FB
> Please do not undef what is not defiend anyway.

Would you be okay with this:

/* video */
/* #define CONFIG_FSL_DIU_FB */

#ifdef CONFIG_FSL_DIU_FB

> And please put the respective arch custodians on Cc:

I did CC: Kumar.  He's the PowerPC arch custodian.

I don't consider this to be a patch for the video repository, so I didn't CC:
Anatolij.

-- 
Timur Tabi
Linux kernel developer at Freescale

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot] [PATCH] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS
  2011-02-15 21:40   ` Timur Tabi
@ 2011-02-15 21:55     ` Wolfgang Denk
  2011-02-15 22:00       ` Wolfgang Denk
  0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Denk @ 2011-02-15 21:55 UTC (permalink / raw)
  To: u-boot

Dear Timur Tabi,

In message <4D5AF2C9.10105@freescale.com> you wrote:
>
> > And please put the respective arch custodians on Cc:
> 
> I did CC: Kumar.  He's the PowerPC arch custodian.

No. There is no such thing as a "PowerPC" custodian. Kumar is
responsible for 85xx/86xx.

This patch also affects 5xxx.

For details please see http://www.denx.de/wiki/U-Boot/Custodians

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
For every problem there is one solution which is  simple,  neat,  and
wrong.                                                - H. L. Mencken

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot] [PATCH] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS
  2011-02-15 21:55     ` Wolfgang Denk
@ 2011-02-15 22:00       ` Wolfgang Denk
  0 siblings, 0 replies; 5+ messages in thread
From: Wolfgang Denk @ 2011-02-15 22:00 UTC (permalink / raw)
  To: u-boot

Dear Timur Tabi,

In message <20110215215557.8F4C21519FE@gemini.denx.de> I wrote:
> 
> In message <4D5AF2C9.10105@freescale.com> you wrote:
> >
> > > And please put the respective arch custodians on Cc:

To make myself more clear:

Normally, you should put the respective board maintainer(s) on Cc:.

Only in cases like here, where the boards are orphaned and without
registered maintainers, the respective arch custodians should be
Cc:ed.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Die ganzen Zahlen hat der liebe Gott  geschaffen,  alles  andere  ist
Menschenwerk...                                     Leopold Kronecker

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2011-02-15 22:00 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-15 21:22 [U-Boot] [PATCH] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS Timur Tabi
2011-02-15 21:30 ` Wolfgang Denk
2011-02-15 21:40   ` Timur Tabi
2011-02-15 21:55     ` Wolfgang Denk
2011-02-15 22:00       ` Wolfgang Denk

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.