* [U-Boot] ppc460ex NAND flash programming
@ 2011-02-16 16:48 Fawaz Gaili
2011-02-16 16:53 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Fawaz Gaili @ 2011-02-16 16:48 UTC (permalink / raw)
To: u-boot
I want to do NAND flash programming with u-boot-nand in a row board
(Canyonlands PPC460Ex) , what is the solution?
I changed TLB entries as SPL did, then loaded u-boot.bin (ram u-boot)
into target's RAM using BDI-2000 (in order to use U-BOOT itself to do
the programming) and issuing go command, it didn't work.
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] ppc460ex NAND flash programming
2011-02-16 16:48 [U-Boot] ppc460ex NAND flash programming Fawaz Gaili
@ 2011-02-16 16:53 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2011-02-16 16:53 UTC (permalink / raw)
To: u-boot
Hi Fawaz,
On Wednesday 16 February 2011 17:48:06 Fawaz Gaili wrote:
> I want to do NAND flash programming with u-boot-nand in a row board
> (Canyonlands PPC460Ex) , what is the solution?
> I changed TLB entries as SPL did, then loaded u-boot.bin (ram u-boot)
> into target's RAM using BDI-2000 (in order to use U-BOOT itself to do
> the programming) and issuing go command, it didn't work.
Your question is not really clear to me. Are you trying the NAND booting
feature on the APM Canyonlands 460EX evaluation board? Or do you have a custom
460EX board without NOR flash, where you try to initially program the NAND
flash?
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-02-16 16:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-16 16:48 [U-Boot] ppc460ex NAND flash programming Fawaz Gaili
2011-02-16 16:53 ` Stefan Roese
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.