[Xenomai-help] libnative.so.3: cannot handle TLS data

[Xenomai-help] libnative.so.3: cannot handle TLS data

[Lin Zhang]

Dear all, 

I am building my own embedded system with xenomai-2.5.5.2 and virtex ii xup board with powerpc. 

The linux kernel is 2.6.33, with xenomai and powerpc patched. I use busybox 1.6.1 stable version.

I tried the following line on my powerpc system: 

/usr/xenomai/bin # ./latency

Then I received an error:
./latency: error while loading shared libraries: libnative.so.3: cannot handle TLS data

My xenomai related software does not run, it reports a similar error:
error while loading shared libraries: libxenomai.so.0: cannot handle TLS data

Have anyone seen this kind of problem? Could you please give me some hints?

Thanks in advance.

Best regards,
Lin 

Re: [Xenomai-help] libnative.so.3: cannot handle TLS data

[Gilles Chanteperdrix]

Lin Zhang wrote:
> Dear all, 
> 
> I am building my own embedded system with xenomai-2.5.5.2 and virtex ii xup board with powerpc. 
> 
> The linux kernel is 2.6.33, with xenomai and powerpc patched. I use busybox 1.6.1 stable version.
> 
> I tried the following line on my powerpc system: 
> 
> /usr/xenomai/bin # ./latency
> 
> Then I received an error:
> ./latency: error while loading shared libraries: libnative.so.3: cannot handle TLS data
> 
> My xenomai related software does not run, it reports a similar error:
> error while loading shared libraries: libxenomai.so.0: cannot handle TLS data
> 
> Have anyone seen this kind of problem? Could you please give me some hints?

Please try xenomai 2.5.6.

-- 
					    Gilles.