From: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: davidb@codeaurora.org, dwalker@fifo99.com,
"David S. Miller" <davem@davemloft.net>,
Andrew Morton <akpm@linux-foundation.org>,
Bryan Huntsman <bryanh@codeaurora.org>,
David Collins <collinsd@codeaurora.org>,
Greg Kroah-Hartman <gregkh@suse.de>,
Joe Perches <joe@perches.com>,
Russell King <linux@arm.linux.org.uk>,
Samuel Ortiz <sameo@linux.intel.com>,
Stepan Moskovchenko <stepanm@codeaurora.org>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Linus Walleij <linux.walleij@linaro.org>,
Thomas Glexiner <tglx@linutronix.de>,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver
Date: Thu, 17 Mar 2011 13:27:22 -0700 [thread overview]
Message-ID: <4D826EAA.3070807@codeaurora.org> (raw)
In-Reply-To: <20110317180013.GJ9597@angua.secretlab.ca>
Grant Likely wrote:
> On Wed, Mar 16, 2011 at 07:23:58PM -0700, adharmap@codeaurora.org wrote:
>> Add support for GPIO on Qualcomm PM8xxx PMIC chips.
>>
>> Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
>
> Minor points below, but otherwise:
>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
Thanks Grant, can you review (and ack) drivers/mfd/pm8xxx-mpp.c? Now
that I think, mpp is basically a gpio device, so should I move it to
drivers/gpio?
mpp is the 4th patch in this series and can be found here.
https://patchwork.kernel.org/patch/640891/
>> diff --git a/drivers/gpio/pm8xxx-gpio.c b/drivers/gpio/pm8xxx-gpio.c
>> new file mode 100644
>> index 0000000..8995764
>> --- /dev/null
>> +++ b/drivers/gpio/pm8xxx-gpio.c
>> @@ -0,0 +1,455 @@
>> +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
>
> Nit: first line should be '/*' and start the comments on the second
> line. It also helps for the first line of the comment block to be a
> single line description of what the driver actually is. (a
> description, not a filename).
>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +/*
>> + * Qualcomm PMIC8XXX GPIO driver
>
> Heh, this is the line I just was talking about should appear at the
> top of the file. :-)
Ok I will make this change for all the files in the patchset.
>> +
>> +static int __init pm_gpio_init(void)
>> +{
>> + int rc = platform_driver_register(&pm_gpio_driver);
>> +
>> + return rc;
>> +}
>
> Or simply:
>
> return platform_driver_register(&pm_gpio_driver);
yes will do.
--
Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm
Innovation Center, Inc. is a member of the Code Aurora Forum.
WARNING: multiple messages have this Message-ID (diff)
From: adharmap@codeaurora.org (Abhijeet Dharmapurikar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver
Date: Thu, 17 Mar 2011 13:27:22 -0700 [thread overview]
Message-ID: <4D826EAA.3070807@codeaurora.org> (raw)
In-Reply-To: <20110317180013.GJ9597@angua.secretlab.ca>
Grant Likely wrote:
> On Wed, Mar 16, 2011 at 07:23:58PM -0700, adharmap at codeaurora.org wrote:
>> Add support for GPIO on Qualcomm PM8xxx PMIC chips.
>>
>> Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
>
> Minor points below, but otherwise:
>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
Thanks Grant, can you review (and ack) drivers/mfd/pm8xxx-mpp.c? Now
that I think, mpp is basically a gpio device, so should I move it to
drivers/gpio?
mpp is the 4th patch in this series and can be found here.
https://patchwork.kernel.org/patch/640891/
>> diff --git a/drivers/gpio/pm8xxx-gpio.c b/drivers/gpio/pm8xxx-gpio.c
>> new file mode 100644
>> index 0000000..8995764
>> --- /dev/null
>> +++ b/drivers/gpio/pm8xxx-gpio.c
>> @@ -0,0 +1,455 @@
>> +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
>
> Nit: first line should be '/*' and start the comments on the second
> line. It also helps for the first line of the comment block to be a
> single line description of what the driver actually is. (a
> description, not a filename).
>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +/*
>> + * Qualcomm PMIC8XXX GPIO driver
>
> Heh, this is the line I just was talking about should appear at the
> top of the file. :-)
Ok I will make this change for all the files in the patchset.
>> +
>> +static int __init pm_gpio_init(void)
>> +{
>> + int rc = platform_driver_register(&pm_gpio_driver);
>> +
>> + return rc;
>> +}
>
> Or simply:
>
> return platform_driver_register(&pm_gpio_driver);
yes will do.
--
Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm
Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-03-17 20:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-17 2:23 [PM8921 MFD V3 0/6] pmic8921 core and subdevices adharmap
2011-03-17 2:23 ` adharmap at codeaurora.org
2011-03-17 2:23 ` [PM8921 MFD V3 1/6] mfd: pm8921: Add PMIC 8921 core driver adharmap
2011-03-17 2:23 ` adharmap at codeaurora.org
2011-03-17 2:23 ` [PM8921 MFD V3 2/6] mfd: pm8xxx: Add irq support adharmap
2011-03-17 2:23 ` adharmap at codeaurora.org
2011-03-17 9:59 ` Thomas Gleixner
2011-03-17 9:59 ` Thomas Gleixner
2011-03-17 9:59 ` Thomas Gleixner
2011-03-17 2:23 ` [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver adharmap
2011-03-17 2:23 ` adharmap at codeaurora.org
2011-03-17 18:00 ` Grant Likely
2011-03-17 18:00 ` Grant Likely
2011-03-17 20:27 ` Abhijeet Dharmapurikar [this message]
2011-03-17 20:27 ` Abhijeet Dharmapurikar
2011-03-17 20:35 ` Grant Likely
2011-03-17 20:35 ` Grant Likely
2011-03-17 2:23 ` [PM8921 MFD V3 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver adharmap
2011-03-17 2:23 ` adharmap at codeaurora.org
2011-03-17 2:24 ` [PM8921 MFD V3 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem adharmap
2011-03-17 2:24 ` adharmap at codeaurora.org
2011-03-17 2:24 ` [PM8921 MFD V3 6/6] msm: board-8960: Add support for pm8921 adharmap
2011-03-17 2:24 ` adharmap at codeaurora.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D826EAA.3070807@codeaurora.org \
--to=adharmap@codeaurora.org \
--cc=akpm@linux-foundation.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=bryanh@codeaurora.org \
--cc=collinsd@codeaurora.org \
--cc=davem@davemloft.net \
--cc=davidb@codeaurora.org \
--cc=dwalker@fifo99.com \
--cc=grant.likely@secretlab.ca \
--cc=gregkh@suse.de \
--cc=joe@perches.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux.walleij@linaro.org \
--cc=linux@arm.linux.org.uk \
--cc=sameo@linux.intel.com \
--cc=stepanm@codeaurora.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.