From: Lydia Wang <lydiawang@viatech.com.cn>
To: alsa-devel@alsa-project.org, tiwai@suse.de,
HaraldWelte@viatech.com, lydiawang@viatech.com.cn
Subject: [PATCH 2/16] ALSA: VIA HDA: Add support for VT1802
Date: Mon, 21 Mar 2011 15:22:39 +0800 [thread overview]
Message-ID: <4D86FCBF.60803@viatech.com.cn> (raw)
From: Lydia Wang <lydiawang@viatech.com.cn>
Subject: ALSA: VIA HDA: Add support for VT1802.
Add support for VT1802 codec, which is similiar with VT2002P.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
sound/pci/hda/patch_via.c | 208 +++++++++++++++++++++++++------
1 file changed, 174 insertions(+), 34 deletions(-)
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -98,6 +98,7 @@
VT1716S,
VT2002P,
VT1812,
+ VT1802,
CODEC_TYPES,
};
@@ -216,6 +217,8 @@
codec_type = VT1812;
else if (dev_id == 0x0440)
codec_type = VT1708S;
+ else if ((dev_id & 0xfff) == 0x446)
+ codec_type = VT1802;
else
codec_type = UNKNOWN;
return codec_type;
@@ -734,7 +737,8 @@
|| spec->codec_type == VT1718S
|| spec->codec_type == VT1716S
|| spec->codec_type == VT2002P
- || spec->codec_type == VT1812) {
+ || spec->codec_type == VT1812
+ || spec->codec_type == VT1802) {
activate_ctl(codec, "Headphone Playback Volume",
spec->hp_independent_mode);
activate_ctl(codec, "Headphone Playback Switch",
@@ -770,6 +774,7 @@
nid = 0x34;
break;
case VT2002P:
+ case VT1802:
nid = 0x35;
break;
case VT1812:
@@ -1045,6 +1050,7 @@
break;
case VT2002P:
case VT1812:
+ case VT1802:
nid_mixer = 0x21;
start_idx = 0;
end_idx = 2;
@@ -1109,6 +1115,7 @@
break;
case VT2002P:
case VT1812:
+ case VT1802:
verb = 0xf93;
parm = enable ? 0x00 : 0xe0; /* 0x00: 4/40x, 0xe0: 1x */
break;
@@ -1637,7 +1644,9 @@
unsigned int hp_present;
struct via_spec *spec = codec->spec;
- if (spec->codec_type != VT2002P && spec->codec_type != VT1812)
+ if (spec->codec_type != VT2002P &&
+ spec->codec_type != VT1812 &&
+ spec->codec_type != VT1802)
return;
hp_present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]);
@@ -2122,7 +2131,10 @@
via_auto_init_multi_out(codec);
via_auto_init_hp_out(codec);
via_auto_init_analog_input(codec);
- if (spec->codec_type == VT2002P || spec->codec_type == VT1812) {
+
+ if (spec->codec_type == VT2002P ||
+ spec->codec_type == VT1812 ||
+ spec->codec_type == VT1802) {
via_hp_bind_automute(codec);
} else {
via_hp_automute(codec);
@@ -5187,6 +5199,67 @@
{0x1, 0xfb8, 0x88},
{ }
};
+static struct hda_verb vt1802_volume_init_verbs[] = {
+ /* Special verbs */
+ /*{0x1, 0xf93, 0xc3},
+ {0x1, 0xfa2, 0x70},
+ {0x1, 0xfe0, 0x04},
+ {0x1, 0xfe3, 0xfc},
+ {0x1, 0xff0, 0x39},
+ {0x1, 0xfa1, 0x58},
+ {0x1, 0xfd9, 0x0b},
+ {0x1, 0xfdb, 0x20},
+ {0x1, 0xfb0, 0x2b},*/
+ /*
+ * Unmute ADC0-1 and set the default input to mic-in
+ */
+ {0x8, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x9, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+
+ /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ */
+ /* Amp Indices: CD = 1, Mic1 = 2, Line = 3, Mic2 = 4 */
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
+ /* MUX Indices: Mic = 0 */
+ {0x1e, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x1f, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* PW9 Output enable */
+ {0x2d, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN},
+
+ /* Enable Boost Volume backdoor */
+ {0x1, 0xfb9, 0x24},
+
+ /* MW0/1/4/8: un-mute index 0 (MUXx), un-mute index 1 (MW9) */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* set MUX0/1/4/8 = 0 (AOW0) */
+ {0x34, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x35, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x38, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x3c, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* set PW0 index=0 (MW0) */
+ {0x24, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* Enable AOW0 to MW9 */
+ {0x1, 0xfb8, 0x88},
+ { }
+};
static struct hda_verb vt2002P_uniwill_init_verbs[] = {
@@ -5199,6 +5272,16 @@
{0x2b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
{ }
};
+static struct hda_verb vt1802_uniwill_init_verbs[] = {
+ {0x25, AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT},
+ {0x28, AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT},
+ {0x29, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+ {0x2a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+ {0x2b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+ { }
+};
static struct hda_pcm_stream vt2002P_pcm_analog_playback = {
.substreams = 2,
@@ -5255,10 +5338,15 @@
const struct auto_pin_cfg *cfg)
{
int err;
+ hda_nid_t sw_nid;
if (!cfg->line_out_pins[0])
return -1;
+ if (spec->codec_type == VT1802)
+ sw_nid = 0x28;
+ else
+ sw_nid = 0x26;
/* Line-Out: PortE */
err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
@@ -5268,7 +5356,7 @@
return err;
err = via_add_control(spec, VIA_CTL_WIDGET_BIND_PIN_MUTE,
"Master Front Playback Switch",
- HDA_COMPOSE_AMP_VAL(0x26, 3, 0, HDA_OUTPUT));
+ HDA_COMPOSE_AMP_VAL(sw_nid, 3, 0, HDA_OUTPUT));
if (err < 0)
return err;
@@ -5403,22 +5491,41 @@
/* AOW0 (8h)*/
snd_hda_codec_write(codec, 0x8, 0, AC_VERB_SET_POWER_STATE, parm);
- /* PW4 (26h), MW4 (1ch), MUX4(37h) */
- parm = AC_PWRST_D3;
- set_pin_power_state(codec, 0x26, &parm);
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x37, 0,
- AC_VERB_SET_POWER_STATE, parm);
-
+ if (spec->codec_type == VT1802) {
+ /* PW4 (28h), MW4 (18h), MUX4(38h) */
+ parm = AC_PWRST_D3;
+ set_pin_power_state(codec, 0x28, &parm);
+ snd_hda_codec_write(codec, 0x18, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x38, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ } else {
+ /* PW4 (26h), MW4 (1ch), MUX4(37h) */
+ parm = AC_PWRST_D3;
+ set_pin_power_state(codec, 0x26, &parm);
+ snd_hda_codec_write(codec, 0x1c, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x37, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ }
- /* PW1 (25h), MW1 (19h), MUX1(35h), AOW1 (9h) */
- parm = AC_PWRST_D3;
- set_pin_power_state(codec, 0x25, &parm);
- snd_hda_codec_write(codec, 0x19, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x35, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ if (spec->codec_type == VT1802) {
+ /* PW1 (25h), MW1 (15h), MUX1(35h), AOW1 (9h) */
+ parm = AC_PWRST_D3;
+ set_pin_power_state(codec, 0x25, &parm);
+ snd_hda_codec_write(codec, 0x15, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x35, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ } else {
+ /* PW1 (25h), MW1 (19h), MUX1(35h), AOW1 (9h) */
+ parm = AC_PWRST_D3;
+ set_pin_power_state(codec, 0x25, &parm);
+ snd_hda_codec_write(codec, 0x19, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x35, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ }
if (spec->hp_independent_mode)
snd_hda_codec_write(codec, 0x9, 0,
@@ -5432,8 +5539,12 @@
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x24, &parm);
parm = present ? AC_PWRST_D3 : AC_PWRST_D0;
- snd_hda_codec_write(codec, 0x18, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ if (spec->codec_type == VT1802)
+ snd_hda_codec_write(codec, 0x14, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ else
+ snd_hda_codec_write(codec, 0x18, 0,
+ AC_VERB_SET_POWER_STATE, parm);
snd_hda_codec_write(codec, 0x34, 0, AC_VERB_SET_POWER_STATE, parm);
/* Mono Out */
@@ -5441,15 +5552,23 @@
snd_hda_codec_read(codec, 0x26, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
parm = present ? AC_PWRST_D3 : AC_PWRST_D0;
-
- /* PW15 (31h), MW8(17h), MUX8(3bh) */
- snd_hda_codec_write(codec, 0x31, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x17, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x3b, 0,
- AC_VERB_SET_POWER_STATE, parm);
-
+ if (spec->codec_type == VT1802) {
+ /* PW15 (33h), MW8(1ch), MUX8(3ch) */
+ snd_hda_codec_write(codec, 0x33, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x1c, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x3c, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ } else {
+ /* PW15 (31h), MW8(17h), MUX8(3bh) */
+ snd_hda_codec_write(codec, 0x31, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x17, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ snd_hda_codec_write(codec, 0x3b, 0,
+ AC_VERB_SET_POWER_STATE, parm);
+ }
/* MW9 (21h) */
if (imux_is_smixer || !is_aa_path_mute(codec))
snd_hda_codec_write(codec, 0x21, 0,
@@ -5480,14 +5599,31 @@
"from BIOS. Using genenic mode...\n");
}
- spec->init_verbs[spec->num_iverbs++] = vt2002P_volume_init_verbs;
- spec->init_verbs[spec->num_iverbs++] = vt2002P_uniwill_init_verbs;
+ if (spec->codec_type == VT1802)
+ spec->init_verbs[spec->num_iverbs++] =
+ vt1802_volume_init_verbs;
+ else
+ spec->init_verbs[spec->num_iverbs++] =
+ vt2002P_volume_init_verbs;
+
+ if (spec->codec_type == VT1802)
+ spec->init_verbs[spec->num_iverbs++] =
+ vt1802_uniwill_init_verbs;
+ else
+ spec->init_verbs[spec->num_iverbs++] =
+ vt2002P_uniwill_init_verbs;
- spec->stream_name_analog = "VT2002P Analog";
+ if (spec->codec_type == VT1802)
+ spec->stream_name_analog = "VT1802 Analog";
+ else
+ spec->stream_name_analog = "VT2002P Analog";
spec->stream_analog_playback = &vt2002P_pcm_analog_playback;
spec->stream_analog_capture = &vt2002P_pcm_analog_capture;
- spec->stream_name_digital = "VT2002P Digital";
+ if (spec->codec_type == VT1802)
+ spec->stream_name_digital = "VT1802 Digital";
+ else
+ spec->stream_name_digital = "VT2002P Digital";
spec->stream_digital_playback = &vt2002P_pcm_digital_playback;
if (!spec->adc_nids && spec->input_mux) {
@@ -6020,6 +6156,10 @@
{ .id = 0x11060448, .name = "VT1812", .patch = patch_vt1812},
{ .id = 0x11060440, .name = "VT1818S",
.patch = patch_vt1708S},
+ { .id = 0x11060446, .name = "VT1802",
+ .patch = patch_vt2002P},
+ { .id = 0x11068446, .name = "VT1802",
+ .patch = patch_vt2002P},
{} /* terminator */
};
next reply other threads:[~2011-03-21 7:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-21 7:22 Lydia Wang [this message]
2011-03-21 12:00 ` [PATCH 2/16] ALSA: VIA HDA: Add support for VT1802 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D86FCBF.60803@viatech.com.cn \
--to=lydiawang@viatech.com.cn \
--cc=HaraldWelte@viatech.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.