* multipath-tools and IBM 2810 XIV
@ 2011-03-22 17:42 Bryn M. Reeves
0 siblings, 0 replies; only message in thread
From: Bryn M. Reeves @ 2011-03-22 17:42 UTC (permalink / raw)
To: device-mapper development
Hi Folks,
Wondered if anyone had any experience with multipath-tools and the IBM XIV
storage (2810 range, possibly others)?
They look like this:
Host: scsi8 Channel: 00 Id: 01 Lun: 01
Vendor: IBM Model: 2810XIV Rev: 10.1
Type: Direct-Access ANSI SCSI revision: 05
There's an IBM document that describes the configuration of these arrays under
Linux here:
http://publib.boulder.ibm.com/infocenter/ibmxiv/r2/topic/com.ibm.help.xiv.doc/docs/hsag_older_than_1_1/Host_System_Attachment_Guide_for_Linux.pdf
Which provides a multipath.conf that appears to work fine but I was wondering if
anyone has experience of using these arrays with multipath-tools - in particular
I'd like to know what the "host_connect" packages contain and whether you can
avoid installing them with a few manual steps.
Regards,
Bryn.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-03-22 17:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-22 17:42 multipath-tools and IBM 2810 XIV Bryn M. Reeves
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.