From: "Prchal Jiří" <jiri.prchal@aksignal.cz>
To: linux-mmc@vger.kernel.org, nicolas.ferre@atmel.com,
linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] mmc, AT91: fix init fequency problem
Date: Thu, 24 Mar 2011 10:10:35 +0100 [thread overview]
Message-ID: <4D8B0A8B.6030002@aksignal.cz> (raw)
In-Reply-To: <1300949648-15078-2-git-send-email-horms@verge.net.au>
Hi,
this patch fixes problem with some SD cards during initialization. Not all SD(HC) card can run at even 375kHz. Sets
minimal frequency to 200kHz.
And in function "at91_mci_set_ios" is limit to maximum division, it's only 8 bit value.
Kernel version: 2.6.38
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
---
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/drivers/mmc/host/at91_mci.c
/home/prchal/arm/fw-cdu/linux/linux-2.6.38/drivers/mmc/host/at91_mci.c
--- linux-2.6.38-vanilla/drivers/mmc/host/at91_mci.c 2011-03-15 02:20:32.000000000 +0100
+++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/drivers/mmc/host/at91_mci.c 2011-03-24 09:20:22.869370179 +0100
@@ -724,6 +724,10 @@ static void at91_mci_set_ios(struct mmc_
else
clkdiv = (at91_master_clock / ios->clock) / 2;
+ /* set maximum divider */
+ if (clkdiv > 255)
+ clkdiv = 255;
+
pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
at91_master_clock / (2 * (clkdiv + 1)));
}
@@ -944,7 +948,7 @@ static int __init at91_mci_probe(struct
}
mmc->ops = &at91_mci_ops;
- mmc->f_min = 375000;
+ mmc->f_min = 200000; /* not all cards can run at 375kHz */
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = 0;
WARNING: multiple messages have this Message-ID (diff)
From: jiri.prchal@aksignal.cz (Prchal Jiří)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mmc, AT91: fix init fequency problem
Date: Thu, 24 Mar 2011 10:10:35 +0100 [thread overview]
Message-ID: <4D8B0A8B.6030002@aksignal.cz> (raw)
In-Reply-To: <1300949648-15078-2-git-send-email-horms@verge.net.au>
Hi,
this patch fixes problem with some SD cards during initialization. Not all SD(HC) card can run at even 375kHz. Sets
minimal frequency to 200kHz.
And in function "at91_mci_set_ios" is limit to maximum division, it's only 8 bit value.
Kernel version: 2.6.38
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
---
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/drivers/mmc/host/at91_mci.c
/home/prchal/arm/fw-cdu/linux/linux-2.6.38/drivers/mmc/host/at91_mci.c
--- linux-2.6.38-vanilla/drivers/mmc/host/at91_mci.c 2011-03-15 02:20:32.000000000 +0100
+++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/drivers/mmc/host/at91_mci.c 2011-03-24 09:20:22.869370179 +0100
@@ -724,6 +724,10 @@ static void at91_mci_set_ios(struct mmc_
else
clkdiv = (at91_master_clock / ios->clock) / 2;
+ /* set maximum divider */
+ if (clkdiv > 255)
+ clkdiv = 255;
+
pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
at91_master_clock / (2 * (clkdiv + 1)));
}
@@ -944,7 +948,7 @@ static int __init at91_mci_probe(struct
}
mmc->ops = &at91_mci_ops;
- mmc->f_min = 375000;
+ mmc->f_min = 200000; /* not all cards can run at 375kHz */
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = 0;
next prev parent reply other threads:[~2011-03-24 9:10 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-24 6:54 [PATCH 0/2] mmc: zboot helpers Simon Horman
2011-03-24 6:54 ` Simon Horman
2011-03-24 6:54 ` [PATCH 1/2] mmc, ARM: Rename SuperH Mobile ARM " Simon Horman
2011-03-24 6:54 ` Simon Horman
2011-03-24 9:10 ` Prchal Jiří [this message]
2011-03-24 9:10 ` [PATCH] mmc, AT91: fix init fequency problem Prchal Jiří
2011-03-24 10:20 ` [PATCH 1/2] ALSA: ASoc: TLV320AIC3X: ad SPI and clock on GPIO2 or BCLK Prchal Jiří
2011-04-02 8:26 ` Mark Brown
2011-04-02 8:26 ` [alsa-devel] " Mark Brown
2011-04-04 7:49 ` Prchal Jiří
2011-04-04 8:03 ` Mark Brown
2011-04-04 8:01 ` [PATCH] ALSA: ASoc: new functions snd_soc_7_8_* Prchal Jiří
2011-04-04 8:05 ` Mark Brown
2011-04-04 8:05 ` Mark Brown
2011-03-24 10:43 ` [PATCH 2/2] ALSA: ASoc: putting together AT91SAM9260 and TLV320AIC3X Prchal Jiří
2011-03-24 20:07 ` Ryan Mallon
2011-03-24 20:07 ` Ryan Mallon
2011-04-04 8:57 ` Prchal Jiří
2011-04-04 20:07 ` Ryan Mallon
2011-04-04 20:07 ` Ryan Mallon
2011-04-04 9:10 ` [PATCH] ARCH arm: adding new board: CDU Prchal Jiří
2011-04-04 9:10 ` Prchal Jiří
2011-04-04 9:16 ` Russell King - ARM Linux
2011-04-04 9:16 ` Russell King - ARM Linux
2011-04-04 9:24 ` Russell King - ARM Linux
2011-04-04 9:24 ` Russell King - ARM Linux
2011-04-04 20:25 ` Ryan Mallon
2011-04-04 20:25 ` Ryan Mallon
2011-05-31 13:05 ` PROBLEM: ARM: PCM plugin Ima-ADPCM doesn't work properly Prchal Jiří
2011-03-24 6:54 ` [PATCH 2/2] mmc: Add MMC_PROGRESS_* Simon Horman
2011-03-24 6:54 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D8B0A8B.6030002@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.