[ath9k-devel] how to config AR9280 for operation as 1X1 or other ideas

[Felix Fietkau <nbd@openwrt.org>]

On 2011-03-29 6:25 PM, Larry Vaden wrote:
> On Tue, Mar 29, 2011 at 10:28 AM, Felix Fietkau<nbd@openwrt.org>  wrote:
>
>>>20% busy time with only about 5% combined rx/tx time, I guess there's some
>>>  interference on the channel which might be messing with your signal as well.
>>>  Please try different channels and compare the survey output there.
>
> Felix,
>
> Is there a way in OpenWrt for the M900 series to shift the channels
> to, e.g., 909 and 914 MHz?
Not at the moment. It'll use 900 mhz even though it's displaying a 
different frequency, but right now there are no tables for taking the 
frequency shift of the hardware into account.

> Those fs seemed most stable when running AirOS ... (read: no
> spontaneous reboots occurred at those fs).
I don't think reboot stability on AirOS is a good indicator for general 
stability with OpenWrt on these frequencies. If the devices reboot, 
that's an indicator of a driver bug.

- Felix