* [U-Boot] Beagle mux config: nCS5 vs. DMAREQ2?
@ 2011-04-18 10:53 Orjan Friberg
0 siblings, 0 replies; only message in thread
From: Orjan Friberg @ 2011-04-18 10:53 UTC (permalink / raw)
To: u-boot
Hi,
The mux configuration in board/ti/beagle/beagle.h says
MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/
MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/
The TRM (spruf98p) says sys_ndmareq2 is mux mode 1 for ncs5, not ncs6.
(Possibly not a concern for the BeagleBoard; I'm trying to get dmareq2
working on a custom 3730 board.)
Thanks,
Orjan
--
Orjan Friberg
FlatFrog Laboratories AB
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-04-18 10:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-18 10:53 [U-Boot] Beagle mux config: nCS5 vs. DMAREQ2? Orjan Friberg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.