* [Patch v1] AM35xx-Craneboard:Update
@ 2011-05-05 7:15 ` srinath at mistralsolutions.com
0 siblings, 0 replies; 5+ messages in thread
From: srinath @ 2011-05-05 7:15 UTC (permalink / raw)
To: linux-omap
Cc: linux, umeshk, tony, nagendra, Srinath.R, linux-kernel, khilman,
jdk, linux-arm-kernel
From: Srinath.R <srinath@mistralsolutions.com>
Replaced gpio_request()/gpio_direction_output() with gpio_request_one() in am3517_crane_init.
Signed-off-by: Srinath.R <srinath@mistralsolutions.com>
---
arch/arm/mach-omap2/board-am3517crane.c | 10 ++--------
1 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index a890d24..b8c7150 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -89,19 +89,13 @@ static void __init am3517_crane_init(void)
return;
}
- ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable");
+ ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "usb_ehci_enable");
if (ret < 0) {
pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
return;
}
- ret = gpio_direction_output(GPIO_USB_POWER, 1);
- if (ret < 0) {
- gpio_free(GPIO_USB_POWER);
- pr_err("Unable to initialize EHCI power\n");
- return;
- }
-
usbhs_init(&usbhs_bdata);
}
--
1.5.3.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Patch v1] AM35xx-Craneboard:Update
@ 2011-05-05 7:15 ` srinath at mistralsolutions.com
0 siblings, 0 replies; 5+ messages in thread
From: srinath at mistralsolutions.com @ 2011-05-05 7:15 UTC (permalink / raw)
To: linux-arm-kernel
From: Srinath.R <srinath@mistralsolutions.com>
Replaced gpio_request()/gpio_direction_output() with gpio_request_one() in am3517_crane_init.
Signed-off-by: Srinath.R <srinath@mistralsolutions.com>
---
arch/arm/mach-omap2/board-am3517crane.c | 10 ++--------
1 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index a890d24..b8c7150 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -89,19 +89,13 @@ static void __init am3517_crane_init(void)
return;
}
- ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable");
+ ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "usb_ehci_enable");
if (ret < 0) {
pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
return;
}
- ret = gpio_direction_output(GPIO_USB_POWER, 1);
- if (ret < 0) {
- gpio_free(GPIO_USB_POWER);
- pr_err("Unable to initialize EHCI power\n");
- return;
- }
-
usbhs_init(&usbhs_bdata);
}
--
1.5.3.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Patch v1] AM35xx-Craneboard:Update
@ 2011-05-05 7:15 ` srinath at mistralsolutions.com
0 siblings, 0 replies; 5+ messages in thread
From: srinath @ 2011-05-05 7:15 UTC (permalink / raw)
To: linux-omap
Cc: jdk, tony, linux-kernel, linux, linux-arm-kernel, khilman,
nagendra, umeshk, Srinath.R
From: Srinath.R <srinath@mistralsolutions.com>
Replaced gpio_request()/gpio_direction_output() with gpio_request_one() in am3517_crane_init.
Signed-off-by: Srinath.R <srinath@mistralsolutions.com>
---
arch/arm/mach-omap2/board-am3517crane.c | 10 ++--------
1 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index a890d24..b8c7150 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -89,19 +89,13 @@ static void __init am3517_crane_init(void)
return;
}
- ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable");
+ ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "usb_ehci_enable");
if (ret < 0) {
pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
return;
}
- ret = gpio_direction_output(GPIO_USB_POWER, 1);
- if (ret < 0) {
- gpio_free(GPIO_USB_POWER);
- pr_err("Unable to initialize EHCI power\n");
- return;
- }
-
usbhs_init(&usbhs_bdata);
}
--
1.5.3.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [Patch v1] AM35xx-Craneboard:Update
2011-05-05 7:15 ` srinath at mistralsolutions.com
@ 2011-05-05 8:46 ` Igor Grinberg
-1 siblings, 0 replies; 5+ messages in thread
From: Igor Grinberg @ 2011-05-05 8:46 UTC (permalink / raw)
To: srinath
Cc: linux-omap, jdk, tony, linux-kernel, linux, linux-arm-kernel,
khilman, nagendra, umeshk
Hi Srinath,
On 05/05/11 10:15, srinath@mistralsolutions.com wrote:
> From: Srinath.R <srinath@mistralsolutions.com>
>
> Replaced gpio_request()/gpio_direction_output() with gpio_request_one() in am3517_crane_init.
This has been already done and waits for Tony to apply.
Please, see:
http://www.spinics.net/lists/arm-kernel/msg123823.html
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Patch v1] AM35xx-Craneboard:Update
@ 2011-05-05 8:46 ` Igor Grinberg
0 siblings, 0 replies; 5+ messages in thread
From: Igor Grinberg @ 2011-05-05 8:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi Srinath,
On 05/05/11 10:15, srinath at mistralsolutions.com wrote:
> From: Srinath.R <srinath@mistralsolutions.com>
>
> Replaced gpio_request()/gpio_direction_output() with gpio_request_one() in am3517_crane_init.
This has been already done and waits for Tony to apply.
Please, see:
http://www.spinics.net/lists/arm-kernel/msg123823.html
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-05-05 8:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-05 7:15 [Patch v1] AM35xx-Craneboard:Update srinath
2011-05-05 7:15 ` srinath
2011-05-05 7:15 ` srinath at mistralsolutions.com
2011-05-05 8:46 ` Igor Grinberg
2011-05-05 8:46 ` Igor Grinberg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.