From: Rob Landley <rob@landley.net>
To: qemu-devel <qemu-devel@nongnu.org>, LKML <linux-kernel@vger.kernel.org>
Subject: Re: "General protection fault" exiting qemu with current linux-git.
Date: Fri, 06 May 2011 03:34:17 -0500 [thread overview]
Message-ID: <4DC3B289.5000400@landley.net> (raw)
In-Reply-To: <4DC34229.4080202@landley.net>
On 05/05/2011 07:34 PM, Rob Landley wrote:
> I'm running current linux-git (5895198c56d131cc696556) and current
> qemu-git (d2d979c628e4b2c4a3c I think) with the attached kernel .config,
> and it gave me a GPF on exit from the emulator.
>
> I'm not sure which project is responsible, but I thought I'd throw it
> out there...
>
> Rob
Here it is again with function names in the stack trace:
md: stopping all md devices.
e1000 0000:00:03.0: PCI INT A disabled
Restarting system.
machine restart
general protection fault: fff2 [#1] SMP
last sysfs file: /sys/devices/virtual/cpuid/cpu0/dev
CPU 0
Pid: 667, comm: oneit Not tainted 2.6.39-rc6+ #7 Bochs Bochs
RIP: 0010:[<ffffffff8101cbc7>] [<ffffffff8101cbc7>]
native_stop_other_cpus+0x77/0x80
RSP: 0018:ffff880006c0be08 EFLAGS: 00000246
RAX: 00000000000000ff RBX: 0000000000000246 RCX: 00000000ffffffff
RDX: ffffffff81020e50 RSI: 00000000000000ff RDI: 00000000000000f0
RBP: ffffffff816ceeb8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0a74726174736572 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000004 R15: 00000000004009e4
FS: 0000000000000000(0000) GS:ffff880007c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000609910 CR3: 0000000007b3b000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
Process oneit (pid: 667, threadinfo ffff880006c0a000, task ffff880007a5cb00)
Stack:
00000000fee1dead 0000000028121969 0000000001234567 ffffffff8101c4cf
00000000004009e4 ffffffff8101c214 00000000fee1dead ffffffff81053ae7
0000000000000000 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffff8101c4cf>] ? native_machine_shutdown+0x5f/0x80
[<ffffffff8101c214>] ? native_machine_restart+0x24/0x40
[<ffffffff81053ae7>] ? sys_reboot+0x1a7/0x230
[<ffffffff8103cad1>] ? schedule_tail+0x21/0xa0
[<ffffffff814860c3>] ? ret_from_fork+0x13/0x80
[<ffffffff814861bb>] ? system_call_fastpath+0x16/0x1b
Code: 0f 1f 40 00 74 1b 48 89 c3 bf c7 10 00 00 e8 b1 ca 18 00 48 8b 7d
00 f3 48 0f b8 c7 83 f8 01 77 d3 9c 5b fa e8 db 0b 00 00 53 9d <5b> 5d
41 5c c3 0f 1f 40 00 48 83 ec 18 48 8b 05 7d 72 47 00 48
RIP [<ffffffff8101cbc7>] native_stop_other_cpus+0x77/0x80
RSP <ffff880006c0be08>
---[ end trace 12a9e2cf16977a27 ]---
WARNING: multiple messages have this Message-ID (diff)
From: Rob Landley <rob@landley.net>
To: qemu-devel <qemu-devel@nongnu.org>, LKML <linux-kernel@vger.kernel.org>
Subject: Re: [Qemu-devel] "General protection fault" exiting qemu with current linux-git.
Date: Fri, 06 May 2011 03:34:17 -0500 [thread overview]
Message-ID: <4DC3B289.5000400@landley.net> (raw)
In-Reply-To: <4DC34229.4080202@landley.net>
On 05/05/2011 07:34 PM, Rob Landley wrote:
> I'm running current linux-git (5895198c56d131cc696556) and current
> qemu-git (d2d979c628e4b2c4a3c I think) with the attached kernel .config,
> and it gave me a GPF on exit from the emulator.
>
> I'm not sure which project is responsible, but I thought I'd throw it
> out there...
>
> Rob
Here it is again with function names in the stack trace:
md: stopping all md devices.
e1000 0000:00:03.0: PCI INT A disabled
Restarting system.
machine restart
general protection fault: fff2 [#1] SMP
last sysfs file: /sys/devices/virtual/cpuid/cpu0/dev
CPU 0
Pid: 667, comm: oneit Not tainted 2.6.39-rc6+ #7 Bochs Bochs
RIP: 0010:[<ffffffff8101cbc7>] [<ffffffff8101cbc7>]
native_stop_other_cpus+0x77/0x80
RSP: 0018:ffff880006c0be08 EFLAGS: 00000246
RAX: 00000000000000ff RBX: 0000000000000246 RCX: 00000000ffffffff
RDX: ffffffff81020e50 RSI: 00000000000000ff RDI: 00000000000000f0
RBP: ffffffff816ceeb8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0a74726174736572 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000004 R15: 00000000004009e4
FS: 0000000000000000(0000) GS:ffff880007c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000609910 CR3: 0000000007b3b000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
Process oneit (pid: 667, threadinfo ffff880006c0a000, task ffff880007a5cb00)
Stack:
00000000fee1dead 0000000028121969 0000000001234567 ffffffff8101c4cf
00000000004009e4 ffffffff8101c214 00000000fee1dead ffffffff81053ae7
0000000000000000 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffff8101c4cf>] ? native_machine_shutdown+0x5f/0x80
[<ffffffff8101c214>] ? native_machine_restart+0x24/0x40
[<ffffffff81053ae7>] ? sys_reboot+0x1a7/0x230
[<ffffffff8103cad1>] ? schedule_tail+0x21/0xa0
[<ffffffff814860c3>] ? ret_from_fork+0x13/0x80
[<ffffffff814861bb>] ? system_call_fastpath+0x16/0x1b
Code: 0f 1f 40 00 74 1b 48 89 c3 bf c7 10 00 00 e8 b1 ca 18 00 48 8b 7d
00 f3 48 0f b8 c7 83 f8 01 77 d3 9c 5b fa e8 db 0b 00 00 53 9d <5b> 5d
41 5c c3 0f 1f 40 00 48 83 ec 18 48 8b 05 7d 72 47 00 48
RIP [<ffffffff8101cbc7>] native_stop_other_cpus+0x77/0x80
RSP <ffff880006c0be08>
---[ end trace 12a9e2cf16977a27 ]---
next prev parent reply other threads:[~2011-05-06 8:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-06 0:34 "General protection fault" exiting qemu with current linux-git Rob Landley
2011-05-06 0:34 ` [Qemu-devel] " Rob Landley
2011-05-06 8:34 ` Rob Landley [this message]
2011-05-06 8:34 ` Rob Landley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DC3B289.5000400@landley.net \
--to=rob@landley.net \
--cc=linux-kernel@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.