All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anthony Liguori <anthony@codemonkey.ws>
To: Alexander Graf <agraf@suse.de>
Cc: anthony.perard@citrix.com, xen-devel@lists.xensource.com,
	qemu-devel@nongnu.org, stefano.stabellini@eu.citrix.com
Subject: Re: [Qemu-devel] [PULL] Xen HVM support
Date: Thu, 12 May 2011 08:33:39 -0500	[thread overview]
Message-ID: <4DCBE1B3.6000002@codemonkey.ws> (raw)
In-Reply-To: <1304962787-1959-1-git-send-email-agraf@suse.de>

On 05/09/2011 12:39 PM, Alexander Graf wrote:
> Hi Anthony,
>
> These are Anthony's patches for Xen HVM support, nicely signed off,
> rebased to fit today's HEAD and compile tested.
>
> Please pull.

Pulled.  Thanks.

Regards,

Anthony Liguori

>
>
> Alex
>
> The following changes since commit 85097db6956bc86e2377b63a8309cb8b24d54139:
>    Richard Henderson (1):
>          irq: Privatize CPU_INTERRUPT_NMI.
>
> are available in the git repository at:
>
>    git://repo.or.cz/qemu/agraf.git xen-next
>
> Anthony PERARD (16):
>        Introduce -machine command option.
>        machine, Add default_machine_opts to QEMUMachine.
>        xen: Replace some tab-indents with spaces (clean-up).
>        xen: Make Xen build once.
>        xen: Support new libxc calls from xen unstable.
>        xen: Add initialisation of Xen
>        pc_memory_init: Move memory calculation to the caller.
>        xen: Add xenfv machine
>        pc, Disable vmport initialisation with Xen.
>        piix_pci: Introduces Xen specific call for irq.
>        xen: Introduce Xen Interrupt Controller
>        Introduce qemu_put_ram_ptr
>        configure: Always use 64bits target physical addresses with xen enabled.
>        vl.c: Introduce getter for shutdown_requested and reset_requested.
>        xen: Set running state in xenstore.
>        xen: Add Xen hypercall for sleep state in the cmos_s3 callback.
>
> Arun Sharma (1):
>        xen: Initialize event channels and io rings
>
> John Baboval (2):
>        xen: Adds a cap to the number of map cache entries.
>        pci: Use of qemu_put_ram_ptr in pci_add_option_rom.
>
> Jun Nakajima (1):
>        xen: Introduce the Xen mapcache
>
>   Makefile.target      |   14 +-
>   arch_init.c          |    5 +
>   arch_init.h          |    1 +
>   configure            |   71 ++++++-
>   cpu-common.h         |    1 +
>   exec.c               |   86 +++++++-
>   hw/boards.h          |    1 +
>   hw/pc.c              |   28 +--
>   hw/pc.h              |   11 +-
>   hw/pc_piix.c         |   71 ++++++-
>   hw/pci.c             |    2 +
>   hw/piix_pci.c        |   49 ++++-
>   hw/xen.h             |   41 ++++
>   hw/xen_backend.c     |  421 +++++++++++++++++++----------------
>   hw/xen_backend.h     |    6 +-
>   hw/xen_common.h      |  106 ++++++++--
>   hw/xen_disk.c        |  496 ++++++++++++++++++++++-------------------
>   hw/xen_domainbuild.c |    3 +-
>   hw/xen_machine_pv.c  |    1 +
>   hw/xen_nic.c         |  265 ++++++++++++----------
>   qemu-config.c        |   14 ++
>   qemu-options.hx      |   10 +
>   sysemu.h             |    2 +
>   trace-events         |   13 +
>   vl.c                 |  136 ++++++++++-
>   xen-all.c            |  605 ++++++++++++++++++++++++++++++++++++++++++++++++++
>   xen-mapcache-stub.c  |   44 ++++
>   xen-mapcache.c       |  375 +++++++++++++++++++++++++++++++
>   xen-mapcache.h       |   37 +++
>   xen-stub.c           |   41 ++++
>   30 files changed, 2343 insertions(+), 613 deletions(-)
>   create mode 100644 xen-all.c
>   create mode 100644 xen-mapcache-stub.c
>   create mode 100644 xen-mapcache.c
>   create mode 100644 xen-mapcache.h
>   create mode 100644 xen-stub.c
>
>
>

WARNING: multiple messages have this Message-ID (diff)
From: Anthony Liguori <anthony@codemonkey.ws>
To: Alexander Graf <agraf@suse.de>
Cc: anthony.perard@citrix.com, xen-devel@lists.xensource.com,
	qemu-devel@nongnu.org, stefano.stabellini@eu.citrix.com
Subject: Re: [PULL] Xen HVM support
Date: Thu, 12 May 2011 08:33:39 -0500	[thread overview]
Message-ID: <4DCBE1B3.6000002@codemonkey.ws> (raw)
In-Reply-To: <1304962787-1959-1-git-send-email-agraf@suse.de>

On 05/09/2011 12:39 PM, Alexander Graf wrote:
> Hi Anthony,
>
> These are Anthony's patches for Xen HVM support, nicely signed off,
> rebased to fit today's HEAD and compile tested.
>
> Please pull.

Pulled.  Thanks.

Regards,

Anthony Liguori

>
>
> Alex
>
> The following changes since commit 85097db6956bc86e2377b63a8309cb8b24d54139:
>    Richard Henderson (1):
>          irq: Privatize CPU_INTERRUPT_NMI.
>
> are available in the git repository at:
>
>    git://repo.or.cz/qemu/agraf.git xen-next
>
> Anthony PERARD (16):
>        Introduce -machine command option.
>        machine, Add default_machine_opts to QEMUMachine.
>        xen: Replace some tab-indents with spaces (clean-up).
>        xen: Make Xen build once.
>        xen: Support new libxc calls from xen unstable.
>        xen: Add initialisation of Xen
>        pc_memory_init: Move memory calculation to the caller.
>        xen: Add xenfv machine
>        pc, Disable vmport initialisation with Xen.
>        piix_pci: Introduces Xen specific call for irq.
>        xen: Introduce Xen Interrupt Controller
>        Introduce qemu_put_ram_ptr
>        configure: Always use 64bits target physical addresses with xen enabled.
>        vl.c: Introduce getter for shutdown_requested and reset_requested.
>        xen: Set running state in xenstore.
>        xen: Add Xen hypercall for sleep state in the cmos_s3 callback.
>
> Arun Sharma (1):
>        xen: Initialize event channels and io rings
>
> John Baboval (2):
>        xen: Adds a cap to the number of map cache entries.
>        pci: Use of qemu_put_ram_ptr in pci_add_option_rom.
>
> Jun Nakajima (1):
>        xen: Introduce the Xen mapcache
>
>   Makefile.target      |   14 +-
>   arch_init.c          |    5 +
>   arch_init.h          |    1 +
>   configure            |   71 ++++++-
>   cpu-common.h         |    1 +
>   exec.c               |   86 +++++++-
>   hw/boards.h          |    1 +
>   hw/pc.c              |   28 +--
>   hw/pc.h              |   11 +-
>   hw/pc_piix.c         |   71 ++++++-
>   hw/pci.c             |    2 +
>   hw/piix_pci.c        |   49 ++++-
>   hw/xen.h             |   41 ++++
>   hw/xen_backend.c     |  421 +++++++++++++++++++----------------
>   hw/xen_backend.h     |    6 +-
>   hw/xen_common.h      |  106 ++++++++--
>   hw/xen_disk.c        |  496 ++++++++++++++++++++++-------------------
>   hw/xen_domainbuild.c |    3 +-
>   hw/xen_machine_pv.c  |    1 +
>   hw/xen_nic.c         |  265 ++++++++++++----------
>   qemu-config.c        |   14 ++
>   qemu-options.hx      |   10 +
>   sysemu.h             |    2 +
>   trace-events         |   13 +
>   vl.c                 |  136 ++++++++++-
>   xen-all.c            |  605 ++++++++++++++++++++++++++++++++++++++++++++++++++
>   xen-mapcache-stub.c  |   44 ++++
>   xen-mapcache.c       |  375 +++++++++++++++++++++++++++++++
>   xen-mapcache.h       |   37 +++
>   xen-stub.c           |   41 ++++
>   30 files changed, 2343 insertions(+), 613 deletions(-)
>   create mode 100644 xen-all.c
>   create mode 100644 xen-mapcache-stub.c
>   create mode 100644 xen-mapcache.c
>   create mode 100644 xen-mapcache.h
>   create mode 100644 xen-stub.c
>
>
>

  reply	other threads:[~2011-05-12 13:33 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-09 17:39 [Qemu-devel] [PULL] Xen HVM support Alexander Graf
2011-05-09 17:39 ` Alexander Graf
2011-05-12 13:33 ` Anthony Liguori [this message]
2011-05-12 13:33   ` Anthony Liguori
2011-05-12 13:39   ` [Qemu-devel] " Stefano Stabellini
2011-05-12 13:39     ` Stefano Stabellini
2011-05-12 13:41     ` Alexander Graf
2011-05-12 13:41       ` Alexander Graf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DCBE1B3.6000002@codemonkey.ws \
    --to=anthony@codemonkey.ws \
    --cc=agraf@suse.de \
    --cc=anthony.perard@citrix.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.