From: Graeme Russ <graeme.russ@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC][Timer API] Revised Specification - Implementation details
Date: Sat, 28 May 2011 10:32:27 +1000 [thread overview]
Message-ID: <4DE0429B.5070409@gmail.com> (raw)
In-Reply-To: <4DDFC820.80302@comcast.net>
On 28/05/11 01:49, J. William Campbell wrote:
> On 5/26/2011 11:54 PM, Graeme Russ wrote:
>> On Fri, May 27, 2011 at 4:33 PM, J. William Campbell
>> <jwilliamcampbell@comcast.net> wrote:
>>> On 5/26/2011 9:33 PM, Graeme Russ wrote:
>>>> Hi Bill,
>>>>
>>> <snip>
>> [massive snip]
[another big snip]
>>>>>> I just realised - the ISR _does not need to call the sync_timebase at
>>>>>> all_
>>>>>> The ISR only needs to call get_ticks(), so it will be fast anyway
>>>>> The problem is that the way we previously detected wrapping does not work
>>>>> if
>>>>> the interrupt rate is == to the counter wrap time, which it essentially
>>>>> always is. If get_ticks is trying to update the wrap count when an
>>>>> interrupt
>>>> Is it, always, on every platform?
>>> Yes, pretty much. You get a terminal count/counter underflow interrupt and
>>> that is it.
>> Not on sc520 - The micro/millisecond counter cannot be used to driver an
>> interrupt - you need to setup a seperate timer. I think the x86 internal
>> performance counters are the same
> What is true, as you have stated, is that the micro/millisecond counter on
> the sc520 does not interrupt at all. Nor do the x86 performance counters.
> The x86 performance counters are a non-problem because they are 64 bits
> long. We don't need interrupts for them. Now, if you choose to use the
> sc520 micro/millisecond counter, then you need another source of
> interrupts. Due to the fact that reading the sc520 counter resets it, we
> must accumulate the elapsed time in software. That means the interrupt
> routine must do a bit more work, but it also allows reading the counters in
I had planned to do _all_ of that in get_ticks(), so all the complicated
code is in one spot which is called by sync_ms_timer() which is in turned
called by either timer_isr() or get_timer()
Of course the problem we have now identified is reentrancy - Looking
forward to seeing your solution
Regards,
Graeme
next prev parent reply other threads:[~2011-05-28 0:32 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-26 13:27 [U-Boot] [RFC][Timer API] Revised Specification - Implementation details Graeme Russ
2011-05-26 15:57 ` Simon Glass
2011-05-26 17:28 ` Wolfgang Denk
2011-05-26 22:44 ` Graeme Russ
2011-05-27 5:23 ` Simon Glass
2011-05-27 7:40 ` Wolfgang Denk
2011-05-27 14:46 ` Simon Glass
2011-05-26 16:56 ` J. William Campbell
2011-05-26 17:53 ` Wolfgang Denk
2011-05-26 18:52 ` J. William Campbell
2011-05-26 19:16 ` Wolfgang Denk
2011-05-26 19:54 ` J. William Campbell
2011-05-26 20:27 ` Wolfgang Denk
2011-05-26 20:39 ` J. William Campbell
2011-05-26 22:59 ` Graeme Russ
2011-05-26 23:28 ` Graeme Russ
2011-05-27 1:26 ` J. William Campbell
2011-05-27 1:51 ` Graeme Russ
2011-05-27 3:54 ` J. William Campbell
2011-05-27 4:33 ` Graeme Russ
2011-05-27 6:33 ` J. William Campbell
2011-05-27 6:54 ` Graeme Russ
2011-05-27 15:49 ` J. William Campbell
2011-05-28 0:32 ` Graeme Russ [this message]
2011-05-27 7:33 ` Wolfgang Denk
2011-05-27 14:16 ` J. William Campbell
2011-05-27 7:28 ` Wolfgang Denk
2011-05-27 14:04 ` J. William Campbell
2011-05-27 7:13 ` Wolfgang Denk
2011-05-27 7:35 ` Graeme Russ
2011-05-27 7:48 ` Wolfgang Denk
2011-05-27 7:57 ` Graeme Russ
2011-05-27 8:01 ` Graeme Russ
2011-05-27 11:27 ` Wolfgang Denk
2011-05-27 12:43 ` Graeme Russ
2011-05-27 13:07 ` Scott McNutt
2011-05-27 15:00 ` J. William Campbell
2011-05-27 15:13 ` Simon Glass
2011-05-27 17:11 ` J. William Campbell
2011-05-27 15:44 ` Scott McNutt
2011-05-27 15:59 ` J. William Campbell
2011-05-29 15:55 ` Wolfgang Denk
2011-05-29 19:12 ` Simon Glass
2011-05-30 10:57 ` Wolfgang Denk
2011-05-30 11:47 ` Graeme Russ
2011-05-30 12:31 ` Wolfgang Denk
2011-05-30 12:46 ` Graeme Russ
2011-05-30 18:57 ` Reinhard Meyer
2011-05-31 0:24 ` Graeme Russ
2011-05-31 4:07 ` Reinhard Meyer
2011-05-31 4:24 ` Graeme Russ
2011-05-31 4:36 ` Reinhard Meyer
2011-05-31 4:53 ` Graeme Russ
2011-05-31 5:56 ` Wolfgang Denk
2011-05-31 4:45 ` Simon Glass
2011-05-31 4:53 ` Reinhard Meyer
2011-05-31 5:03 ` Graeme Russ
2011-05-31 5:16 ` Reinhard Meyer
2011-05-31 6:03 ` Wolfgang Denk
2011-05-31 6:23 ` Graeme Russ
2011-05-31 5:18 ` Wolfgang Denk
2011-05-31 5:37 ` Reinhard Meyer
2011-05-31 6:10 ` Wolfgang Denk
2011-05-31 4:56 ` Simon Glass
2011-05-31 5:49 ` Wolfgang Denk
2011-05-31 6:28 ` Graeme Russ
2011-05-31 6:29 ` Graeme Russ
2011-06-15 13:17 ` Graeme Russ
2011-06-15 16:03 ` Simon Glass
2011-06-15 20:38 ` Graeme Russ
2011-06-15 21:58 ` Simon Glass
2011-06-15 23:09 ` Graeme Russ
2011-06-16 5:53 ` Simon Glass
2011-06-16 6:27 ` Graeme Russ
2011-06-16 13:58 ` Simon Glass
2011-05-27 11:26 ` Wolfgang Denk
2011-05-27 14:23 ` J. William Campbell
2011-05-28 5:53 ` Graeme Russ
2011-05-28 6:18 ` Reinhard Meyer
2011-05-28 8:59 ` Graeme Russ
2011-05-29 1:41 ` J. William Campbell
2011-05-26 17:49 ` Wolfgang Denk
2011-05-26 22:51 ` Graeme Russ
2011-05-27 7:17 ` Wolfgang Denk
2011-05-27 7:33 ` Graeme Russ
2011-05-27 7:45 ` Wolfgang Denk
2011-05-27 14:58 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DE0429B.5070409@gmail.com \
--to=graeme.russ@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.