* How to Enable OMAP3 SGX MODULES on BEAGLEBOARD
@ 2011-05-23 12:15 Akshat Saha
2011-05-23 23:20 ` Darren Hart
0 siblings, 1 reply; 4+ messages in thread
From: Akshat Saha @ 2011-05-23 12:15 UTC (permalink / raw)
To: poky
[-- Attachment #1: Type: text/plain, Size: 112 bytes --]
Hi,
Can anyone guide me, how to enable powervr drivers on beagleboard.
Thanks in Advance.
--
Akshat
[-- Attachment #2: Type: text/html, Size: 281 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to Enable OMAP3 SGX MODULES on BEAGLEBOARD
2011-05-23 12:15 How to Enable OMAP3 SGX MODULES on BEAGLEBOARD Akshat Saha
@ 2011-05-23 23:20 ` Darren Hart
2011-05-30 6:32 ` Koen Kooi
0 siblings, 1 reply; 4+ messages in thread
From: Darren Hart @ 2011-05-23 23:20 UTC (permalink / raw)
To: Akshat Saha; +Cc: poky
On 05/23/2011 05:15 AM, Akshat Saha wrote:
> Hi,
>
> Can anyone guide me, how to enable powervr drivers on beagleboard.
I am currently working on a Beagleboard refresh for the oe-core and
meta-yocto layers. I'm starting with u-boot, then the kernel, and will
see what follows from there. Until that is complete, the best bet for
full Beagleboard support is the angstrom layer.
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to Enable OMAP3 SGX MODULES on BEAGLEBOARD
2011-05-23 23:20 ` Darren Hart
@ 2011-05-30 6:32 ` Koen Kooi
2011-05-31 15:07 ` Darren Hart
0 siblings, 1 reply; 4+ messages in thread
From: Koen Kooi @ 2011-05-30 6:32 UTC (permalink / raw)
To: poky@yoctoproject.org Project
Op 24 mei 2011, om 01:20 heeft Darren Hart het volgende geschreven:
>
>
> On 05/23/2011 05:15 AM, Akshat Saha wrote:
>> Hi,
>>
>> Can anyone guide me, how to enable powervr drivers on beagleboard.
>
> I am currently working on a Beagleboard refresh for the oe-core and
> meta-yocto layers. I'm starting with u-boot, then the kernel, and will
> see what follows from there. Until that is complete, the best bet for
> full Beagleboard support is the angstrom layer.
You mean the meta-texasinstruments layer, right?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to Enable OMAP3 SGX MODULES on BEAGLEBOARD
2011-05-30 6:32 ` Koen Kooi
@ 2011-05-31 15:07 ` Darren Hart
0 siblings, 0 replies; 4+ messages in thread
From: Darren Hart @ 2011-05-31 15:07 UTC (permalink / raw)
To: Koen Kooi; +Cc: poky@yoctoproject.org Project
On 05/29/2011 11:32 PM, Koen Kooi wrote:
>
> Op 24 mei 2011, om 01:20 heeft Darren Hart het volgende geschreven:
>
>>
>>
>> On 05/23/2011 05:15 AM, Akshat Saha wrote:
>>> Hi,
>>>
>>> Can anyone guide me, how to enable powervr drivers on beagleboard.
>>
>> I am currently working on a Beagleboard refresh for the oe-core and
>> meta-yocto layers. I'm starting with u-boot, then the kernel, and will
>> see what follows from there. Until that is complete, the best bet for
>> full Beagleboard support is the angstrom layer.
>
> You mean the meta-texasinstruments layer, right?
Sorry, yes.
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-05-31 15:07 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-23 12:15 How to Enable OMAP3 SGX MODULES on BEAGLEBOARD Akshat Saha
2011-05-23 23:20 ` Darren Hart
2011-05-30 6:32 ` Koen Kooi
2011-05-31 15:07 ` Darren Hart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.