* Add support to huawei e173 @ 2011-05-30 21:11 Leonardo Luiz Padovani da Mata 2011-05-31 16:47 ` Denis Kenzior 0 siblings, 1 reply; 6+ messages in thread From: Leonardo Luiz Padovani da Mata @ 2011-05-30 21:11 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 469 bytes --] hello dudes, what i need to do to check if the implemented drivers are enough to support a modem? Do i just need to add the rules for udev? how do i do that? The id of the modem is 12d1:1c0b huawei e173 thanks -- Leonardo Luiz Padovani da Mata International Syst S/A Metasys Tecnologia Software Engineer Metasys MeeGo Team leonardol(a)metasys.com.br +55-31-3503-9040 "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?" [-- Attachment #2: attachment.html --] [-- Type: text/html, Size: 601 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Add support to huawei e173 2011-05-30 21:11 Add support to huawei e173 Leonardo Luiz Padovani da Mata @ 2011-05-31 16:47 ` Denis Kenzior 2011-05-31 17:45 ` Leonardo Luiz Padovani da Mata 0 siblings, 1 reply; 6+ messages in thread From: Denis Kenzior @ 2011-05-31 16:47 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 647 bytes --] Hi Leonardo, On 05/30/2011 04:11 PM, Leonardo Luiz Padovani da Mata wrote: > hello dudes, what i need to do to check if the implemented drivers are > enough to support a modem? Do i just need to add the rules for udev? how > do i do that? > > The id of the modem is 12d1:1c0b huawei e173 > Check plugins/ofono.rules in git. It looks like a rule is not present for this particular device id. You will have to do some minor poking around to figure out what tty corresponds to what function (e.g. Pcui, Modem, see other Huawei rules for examples), add a new entry to ofono.rules and try to see if it works. Regards, -Denis ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Add support to huawei e173 2011-05-31 16:47 ` Denis Kenzior @ 2011-05-31 17:45 ` Leonardo Luiz Padovani da Mata 2011-05-31 17:52 ` Denis Kenzior 0 siblings, 1 reply; 6+ messages in thread From: Leonardo Luiz Padovani da Mata @ 2011-05-31 17:45 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 1278 bytes --] Hello Denis, how are you? On Tue, May 31, 2011 at 1:47 PM, Denis Kenzior <denkenz@gmail.com> wrote: > Hi Leonardo, > > On 05/30/2011 04:11 PM, Leonardo Luiz Padovani da Mata wrote: > > hello dudes, what i need to do to check if the implemented drivers are > > enough to support a modem? Do i just need to add the rules for udev? how > > do i do that? > > > > The id of the modem is 12d1:1c0b huawei e173 > > > > Check plugins/ofono.rules in git. It looks like a rule is not present > for this particular device id. > > You will have to do some minor poking around to figure out what tty > corresponds to what function (e.g. Pcui, Modem, see other Huawei rules > for examples), add a new entry to ofono.rules and try to see if it works. > > Ok, i've found another possible soluttion using usb_modeswitch, but it didn't work yet: http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=552 Do you think that the usb_modeswitch approach is better/worse? > Regards, > -Denis > Thanks -- Leonardo Luiz Padovani da Mata International Syst S/A Metasys Tecnologia Software Engineer Metasys MeeGo Team leonardol(a)metasys.com.br +55-31-3503-9040 "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?" [-- Attachment #2: attachment.html --] [-- Type: text/html, Size: 1965 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Add support to huawei e173 2011-05-31 17:45 ` Leonardo Luiz Padovani da Mata @ 2011-05-31 17:52 ` Denis Kenzior 2011-05-31 18:05 ` Leonardo Luiz Padovani da Mata 0 siblings, 1 reply; 6+ messages in thread From: Denis Kenzior @ 2011-05-31 17:52 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 1533 bytes --] Hi Leonardo, On 05/31/2011 12:45 PM, Leonardo Luiz Padovani da Mata wrote: > Hello Denis, how are you? > > On Tue, May 31, 2011 at 1:47 PM, Denis Kenzior <denkenz@gmail.com > <mailto:denkenz@gmail.com>> wrote: > > Hi Leonardo, > > On 05/30/2011 04:11 PM, Leonardo Luiz Padovani da Mata wrote: > > hello dudes, what i need to do to check if the implemented drivers are > > enough to support a modem? Do i just need to add the rules for > udev? how > > do i do that? > > > > The id of the modem is 12d1:1c0b huawei e173 > > > > Check plugins/ofono.rules in git. It looks like a rule is not present > for this particular device id. > > You will have to do some minor poking around to figure out what tty > corresponds to what function (e.g. Pcui, Modem, see other Huawei rules > for examples), add a new entry to ofono.rules and try to see if it > works. > > > Ok, i've found another possible soluttion using usb_modeswitch, but it > didn't work yet: > http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=552 > > Do you think that the usb_modeswitch approach is better/worse? This depends a little bit on how your modem is being recognized. If it is recognized as a storage device, then yes, usb_modeswitch will probably be required. If it is already recognized as a modem and the rules are not present in ofono.rules, then you will need to perform the steps I mentioned in my previous mail. Regards, -Denis ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Add support to huawei e173 2011-05-31 17:52 ` Denis Kenzior @ 2011-05-31 18:05 ` Leonardo Luiz Padovani da Mata 2011-05-31 19:11 ` Leonardo Luiz Padovani da Mata 0 siblings, 1 reply; 6+ messages in thread From: Leonardo Luiz Padovani da Mata @ 2011-05-31 18:05 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 2896 bytes --] On Tue, May 31, 2011 at 2:52 PM, Denis Kenzior <denkenz@gmail.com> wrote: > Hi Leonardo, > > On 05/31/2011 12:45 PM, Leonardo Luiz Padovani da Mata wrote: > > Hello Denis, how are you? > > > > On Tue, May 31, 2011 at 1:47 PM, Denis Kenzior <denkenz@gmail.com > > <mailto:denkenz@gmail.com>> wrote: > > > > Hi Leonardo, > > > > On 05/30/2011 04:11 PM, Leonardo Luiz Padovani da Mata wrote: > > > hello dudes, what i need to do to check if the implemented drivers > are > > > enough to support a modem? Do i just need to add the rules for > > udev? how > > > do i do that? > > > > > > The id of the modem is 12d1:1c0b huawei e173 > > > > > > > Check plugins/ofono.rules in git. It looks like a rule is not > present > > for this particular device id. > > > > You will have to do some minor poking around to figure out what tty > > corresponds to what function (e.g. Pcui, Modem, see other Huawei > rules > > for examples), add a new entry to ofono.rules and try to see if it > > works. > > > > > > Ok, i've found another possible soluttion using usb_modeswitch, but it > > didn't work yet: > > http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=552 > > > > Do you think that the usb_modeswitch approach is better/worse? > > This depends a little bit on how your modem is being recognized. If it > is recognized as a storage device, then yes, usb_modeswitch will > probably be required. > > If it is already recognized as a modem and the rules are not present in > ofono.rules, then you will need to perform the steps I mentioned in my > previous mail. > I think it's beeing reconize as a storage device: [69834.725138] usb 1-1: new high speed USB device using ehci_hcd and address 8 [69835.059643] usb 1-1: New USB device found, idVendor=12d1, idProduct=1c0b [69835.059659] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [69835.059672] usb 1-1: Product: HUAWEI Mobile [69835.059681] usb 1-1: Manufacturer: HUAWEI [69835.065356] scsi10 : usb-storage 1-1:1.0 [69835.069655] scsi11 : usb-storage 1-1:1.1 [69837.899663] scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [69837.899734] scsi 11:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [69837.911391] sr0: scsi-1 drive [69837.913325] sr 10:0:0:0: Attached scsi CD-ROM sr0 [69837.914408] sr 10:0:0:0: Attached scsi generic sg1 type 5 [69837.923960] sd 11:0:0:0: Attached scsi generic sg2 type 0 [69837.933196] sd 11:0:0:0: [sdb] Attached SCSI removable disk > > Regards, > -Denis > -- Leonardo Luiz Padovani da Mata International Syst S/A Metasys Tecnologia Software Engineer Metasys MeeGo Team leonardol(a)metasys.com.br +55-31-3503-9040 "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?" [-- Attachment #2: attachment.html --] [-- Type: text/html, Size: 3853 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Add support to huawei e173 2011-05-31 18:05 ` Leonardo Luiz Padovani da Mata @ 2011-05-31 19:11 ` Leonardo Luiz Padovani da Mata 0 siblings, 0 replies; 6+ messages in thread From: Leonardo Luiz Padovani da Mata @ 2011-05-31 19:11 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 5810 bytes --] Hello, after installing the usb-modeswitch packages, and adding information about this modem, i'm getting this output on dmesg: [ 211.821126] usb 1-1: new high speed USB device using ehci_hcd and address 5 [ 212.159596] usb 1-1: New USB device found, idVendor=12d1, idProduct=1c0b [ 212.159613] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 212.159626] usb 1-1: Product: HUAWEI Mobile [ 212.159636] usb 1-1: Manufacturer: HUAWEI [ 212.164491] scsi4 : usb-storage 1-1:1.0 [ 212.168298] scsi5 : usb-storage 1-1:1.1 [ 214.196257] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110 [ 215.196274] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110 [ 223.169124] scsi 4:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 223.169196] scsi 5:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 223.179683] sr0: scsi-1 drive [ 223.179702] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 223.181383] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 223.182586] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 223.190693] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 223.195132] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 223.239512] usb 1-1: USB disconnect, address 5 [ 225.452183] usb 1-1: new high speed USB device using ehci_hcd and address 6 [ 225.568519] usb 1-1: New USB device found, idVendor=12d1, idProduct=1c05 [ 225.568536] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 225.568548] usb 1-1: Product: HUAWEI Mobile I think that usb_modeswitch cannot be done in this device. Maybe you are more familiar with this type of debugging and you can help me. rule added on 40-usb_modeswitch.rules: ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1c0b", RUN+="usb_modeswitch '%b/%k'" file with modem information on /etc/usb_modeswitch.d : ######################################################## # Huawei E173s DefaultVendor= 0x12d1 DefaultProduct= 0x1c0b TargetVendor= 0x12d1 TargetProduct= 0x1c05 CheckSuccess=20 MessageContent="55534243123456780000000000000011060000000000000000000000000000" On interesting information is that this modem has a driver inside the "cd-rom" that must be compiled to worl, at least this is the information on readme file. I'm not sure it this is really needed or not. On Tue, May 31, 2011 at 3:05 PM, Leonardo Luiz Padovani da Mata < leonardol@syst.com.br> wrote: > > > On Tue, May 31, 2011 at 2:52 PM, Denis Kenzior <denkenz@gmail.com> wrote: > >> Hi Leonardo, >> >> On 05/31/2011 12:45 PM, Leonardo Luiz Padovani da Mata wrote: >> > Hello Denis, how are you? >> > >> > On Tue, May 31, 2011 at 1:47 PM, Denis Kenzior <denkenz@gmail.com >> > <mailto:denkenz@gmail.com>> wrote: >> > >> > Hi Leonardo, >> > >> > On 05/30/2011 04:11 PM, Leonardo Luiz Padovani da Mata wrote: >> > > hello dudes, what i need to do to check if the implemented drivers >> are >> > > enough to support a modem? Do i just need to add the rules for >> > udev? how >> > > do i do that? >> > > >> > > The id of the modem is 12d1:1c0b huawei e173 >> > > >> > >> > Check plugins/ofono.rules in git. It looks like a rule is not >> present >> > for this particular device id. >> > >> > You will have to do some minor poking around to figure out what tty >> > corresponds to what function (e.g. Pcui, Modem, see other Huawei >> rules >> > for examples), add a new entry to ofono.rules and try to see if it >> > works. >> > >> > >> > Ok, i've found another possible soluttion using usb_modeswitch, but it >> > didn't work yet: >> > http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=552 >> > >> > Do you think that the usb_modeswitch approach is better/worse? >> >> This depends a little bit on how your modem is being recognized. If it >> is recognized as a storage device, then yes, usb_modeswitch will >> probably be required. >> >> If it is already recognized as a modem and the rules are not present in >> ofono.rules, then you will need to perform the steps I mentioned in my >> previous mail. >> > > I think it's beeing reconize as a storage device: > > [69834.725138] usb 1-1: new high speed USB device using ehci_hcd and > address 8 > [69835.059643] usb 1-1: New USB device found, idVendor=12d1, idProduct=1c0b > [69835.059659] usb 1-1: New USB device strings: Mfr=2, Product=1, > SerialNumber=0 > [69835.059672] usb 1-1: Product: HUAWEI Mobile > [69835.059681] usb 1-1: Manufacturer: HUAWEI > [69835.065356] scsi10 : usb-storage 1-1:1.0 > [69835.069655] scsi11 : usb-storage 1-1:1.1 > [69837.899663] scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage > 2.31 PQ: 0 ANSI: 2 > [69837.899734] scsi 11:0:0:0: Direct-Access HUAWEI SD Storage > 2.31 PQ: 0 ANSI: 2 > [69837.911391] sr0: scsi-1 drive > [69837.913325] sr 10:0:0:0: Attached scsi CD-ROM sr0 > [69837.914408] sr 10:0:0:0: Attached scsi generic sg1 type 5 > [69837.923960] sd 11:0:0:0: Attached scsi generic sg2 type 0 > [69837.933196] sd 11:0:0:0: [sdb] Attached SCSI removable disk > > > > >> >> Regards, >> -Denis >> > > > > -- > Leonardo Luiz Padovani da Mata > > International Syst S/A > Metasys Tecnologia > Software Engineer Metasys MeeGo Team > > leonardol(a)metasys.com.br > +55-31-3503-9040 > > "May the force be with you, always" > "Nerd Pride... eu tenho. Voce tem?" > -- Leonardo Luiz Padovani da Mata International Syst S/A Metasys Tecnologia Software Engineer Metasys MeeGo Team leonardol(a)metasys.com.br +55-31-3503-9040 "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?" [-- Attachment #2: attachment.html --] [-- Type: text/html, Size: 7293 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-05-31 19:11 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-05-30 21:11 Add support to huawei e173 Leonardo Luiz Padovani da Mata 2011-05-31 16:47 ` Denis Kenzior 2011-05-31 17:45 ` Leonardo Luiz Padovani da Mata 2011-05-31 17:52 ` Denis Kenzior 2011-05-31 18:05 ` Leonardo Luiz Padovani da Mata 2011-05-31 19:11 ` Leonardo Luiz Padovani da Mata
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.