* Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
@ 2011-05-31 15:41 Xu, Jiajun
2011-05-31 23:10 ` Darren Hart
2011-06-01 19:03 ` Liu, Song
0 siblings, 2 replies; 7+ messages in thread
From: Xu, Jiajun @ 2011-05-31 15:41 UTC (permalink / raw)
To: poky@pokylinux.org, yocto@yoctoproject.org
[-- Attachment #1.1: Type: text/plain, Size: 4997 bytes --]
Hi all,
This is the weekly test report for Yocto 1.1 M1 RC2 build. There is no new bugs found in this testing. 3 BLOCK issues found in RC1 are fixed. The only one block issue is beagleboard build failed on autobuilder. There are still 9 old open bugs. Grub installation fail on 3 intel BSPs. Graphics testing on sugarbay is blocked.
For bug fixing, the keyboard not work issue and toolchain not built out issue are fixed. Meanwhile, the cvs compile issue is marked as INVALID because it also fails on native. We also remove sudoku-savant compile test in qemu because such error may be caused by limited memory in qemu.
If there is no new build for M1, QA will continue fullpass testing against RC2.
Test Summary
---------------------------------------
Test Result Summary
Component
Target
Status
Comments
BSP
SugarBay
GOOD
Graphics testing is blocked; soft keyboard will be triggered with terminal icon;
CrownBay
GOOD
Grub installation failed;
JasperForest
GOOD
Everything runs well
Blacksand
GOOD
Grub installation failed; S3 does not work;
eMenlow
GOOD
System installation failed; S3 does not work;
Beagleboard
BLOCK
Build failed
Routerstationpro
GOOD
Everything runs well
Mpc8315e-rdb
GOOD
Everything runs well
QEMU
qemux86
GOOD
Everything runs well
qemux86-64
GOOD
Everything runs well
qemuarm
GOOD
Everything runs well
qemuppc
GOOD
unfs does not work with qemuppc
qemumips
GOOD
Everything runs well
ADT
Buggy
unfs does not work with qemuppc
Critical bugs, more than 50% test cases are blocked
Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
Normal, Major and Critical bugs, more than 10% test cases failed
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Sugarbay Sato-SDK
55
0
53
1 (bug 1101)
1 (bug 1112)
Crownbay Sato-SDK
54
0
49
1 (bug 1099)
4
Jasperforest LSB-SDK
31
0
31
0
0
n450 Sato-SDK
54
0
48
2 (bug 613, 1099)
4
eMenlow Sato-SDK
54
0
48
2 (bug 1099, 503)
4
Routerstationpro Sato-SDK
29
0
29
0
0
Mpc8315e-rdb Sato-SDK
30
0
26
4 (bug 766)
0
Qemux86-64 Sato
27
0
27
0
0
Qemux86-64 Sato-SDK
30
0
30
0
0
Qemux86 Sato
27
0
27
0
0
Qemux86 Sato-SDK
30
0
30
0
0
Qemumips Sato
26
0
26
0
0
Qemumips Sato-SDK
32
0
32
0
0
Qemuppc Sato
20
0
19
0
1 (bug 414)
Qemuppc Sato-SDK
26
0
25
0
1 (bug 414)
Qemuarm Sato
26
0
26
0
0
Qemuarm Sato-SDK
32
0
32
0
0
ADT
6
0
5
1 (bug 414)
0
Total
589
0
563
11
15
* You can check the detailed test result in attachment for each target.
** The failed/blocked case number is listed with failed cases’ bug number.
Commit Information
---------------------------------------
Tree/Branch: Poky/1.1_M1
Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
Meta Branch: 1.1_M1
Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
Issue Summary
---------------------------------------
Component
Bug Number
Target Milestone
System & Core OS
Installation & Boot
Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk live image
1.1 M2
Power Mangement
Bug 613: [Blacksand]system cannot enter S3 standby mode
1.1
Bug 503: [emenlow] system cannot enter S3 standby mode
1.1
Others
Bug 1101: keyboard pop up when clicking terminal icon
1.0 M2
Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
1.1 M2
Bug 1097: The mouse can not click accurate to the icons in qemumips X
1.1 M2
Graphics
Bug 1112: [sugarbay] mesa-demos should be added into sato image for graphics testing
Not specified
Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image due to libsdl.so
1.1
Multimedia
Works well in sugarbay/n450/eMenlow/crownbay
ADT
Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
1.1 M3
Verified Fixed Bugs:
1. Bug 1100<http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>: [emenlow/crownbay-noemgd] X window could not start up with sato-sdk image
2. Bug 1108<http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>: keyboard could not work in qemux86/x86-64
3. Bug 1093<http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>: meta-toolchain-gmae: eglibc fails to build with 4.6
Best Regards,
Jiajun
[-- Attachment #1.2: Type: text/html, Size: 105140 bytes --]
[-- Attachment #2: M1-20110528_detail_testreport_weekly.ods --]
[-- Type: application/oleobject, Size: 23249 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [yocto] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
2011-05-31 15:41 Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528 Xu, Jiajun
@ 2011-05-31 23:10 ` Darren Hart
2011-06-01 19:03 ` Liu, Song
1 sibling, 0 replies; 7+ messages in thread
From: Darren Hart @ 2011-05-31 23:10 UTC (permalink / raw)
To: Xu, Jiajun; +Cc: yocto@yoctoproject.org, poky@pokylinux.org
On 05/31/2011 08:41 AM, Xu, Jiajun wrote:
> Hi all,
>
> This is the weekly test report for Yocto 1.1 M1 RC2 build. There
> is no new bugs found in this testing. 3 BLOCK issues found in RC1 are
> fixed. The only one block issue is beagleboard build failed on
> autobuilder.
I didn't see any bugs opened against Beagleboard mentioned below (nor
via a bugzilla query). Are there bugs opened against these build failures?
Thanks,
--
Darren
> There are still 9 old open bugs. Grub installation fail on
> 3 intel BSPs. Graphics testing on sugarbay is blocked.
>
> For bug fixing, the keyboard not work issue and toolchain not
> built out issue are fixed. Meanwhile, the cvs compile issue is marked as
> INVALID because it also fails on native. We also remove sudoku-savant
> compile test in qemu because such error may be caused by limited memory
> in qemu.
>
> If there is no new build for M1, QA will continue fullpass
> testing against RC2.
>
>
>
> *Test Summary*
>
> *---------------------------------------*
>
>
>
>
>
>
>
> *Test Result Summary*
>
>
>
>
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
>
>
>
>
> *BSP*
>
>
>
> SugarBay
>
>
>
> GOOD
>
>
>
> Graphics testing is blocked; soft keyboard will be triggered with
> terminal icon;
>
>
>
>
>
>
>
>
>
> CrownBay
>
>
>
> GOOD
>
>
>
> Grub installation failed;
>
>
>
>
>
>
>
>
>
> JasperForest
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> Blacksand
>
>
>
> GOOD
>
>
>
> Grub installation failed; S3 does not work;
>
>
>
>
>
>
>
>
>
> eMenlow
>
>
>
> GOOD
>
>
>
> System installation failed; S3 does not work;
>
>
>
>
>
>
>
>
>
> Beagleboard
>
>
>
> BLOCK
>
>
>
> Build failed
>
>
>
>
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> *QEMU*
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
>
>
> qemumips
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> *ADT*
>
>
>
>
>
>
>
> Buggy
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
> * *
>
>
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
>
>
>
>
>
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
>
>
>
>
>
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
>
>
>
>
>
>
> *Detailed Test Result for each component*
>
>
>
>
>
> *Target*
>
>
>
> *Total TCs***
>
>
>
> *Not Run*
>
>
>
> *Passed***
>
>
>
> *Failed***
>
>
>
> *Not testable (Blocked)***
>
>
>
>
>
> *Sugarbay Sato-SDK*
>
>
>
> 55
>
>
>
> 0
>
>
>
> 53
>
>
>
> 1 (bug 1101)
>
>
>
> 1 (bug 1112)
>
>
>
>
>
> *Crownbay Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 49
>
>
>
> 1 (bug 1099)
>
>
>
> 4
>
>
>
>
>
> *Jasperforest LSB-SDK*
>
>
>
> 31
>
>
>
> 0
>
>
>
> 31
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *n450 Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 613, 1099)
>
>
>
> 4
>
>
>
>
>
> *eMenlow Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 1099, 503)
>
>
>
> 4
>
>
>
>
>
> *Routerstationpro Sato-SDK*
>
>
>
> 29
>
>
>
> 0
>
>
>
> 29
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 26
>
>
>
> 4 (bug 766)
>
>
>
> 0
>
>
>
>
>
> *Qemux86-64 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86-64 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemumips Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemumips Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemuppc Sato*
>
>
>
> 20
>
>
>
> 0
>
>
>
> 19
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
>
>
> *Qemuppc Sato-SDK*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 25
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
>
>
> *Qemuarm Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemuarm Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *ADT*
>
>
>
> 6
>
>
>
> 0
>
>
>
> 5
>
>
>
> 1 (bug 414)
>
>
>
> 0
>
>
>
>
>
> *Total*
>
>
>
> 589
>
>
>
> 0
>
>
>
> 563
>
>
>
> 11
>
>
>
> 15
>
>
>
>
>
>
>
> * *
>
>
>
>
>
>
> * You can check the detailed test result in attachment for each target.
>
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
>
>
> *Commit Information*
>
> *---------------------------------------*
>
> Tree/Branch: Poky/1.1_M1
>
> Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
>
> Meta Branch: 1.1_M1
>
> Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
>
>
>
> *Issue Summary*
>
> *---------------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *Installation & Boot*
>
>
>
> Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk
> live image
>
>
>
> 1.1 M2
>
> *Power Mangement*
>
>
>
> Bug 613: [Blacksand]system cannot enter S3 standby mode
>
>
>
> 1.1
>
> Bug 503: [emenlow] system cannot enter S3 standby mode
>
>
>
> 1.1
>
> *Others*
>
>
>
> Bug 1101: keyboard pop up when clicking terminal icon
>
>
>
> 1.0 M2
>
> Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
>
>
>
> 1.1 M2
>
> Bug 1097: The mouse can not click accurate to the icons in qemumips X
>
>
>
> 1.1 M2
>
> *Graphics*
>
>
>
> Bug 1112: [sugarbay] mesa-demos should be added into sato image for
> graphics testing
>
>
>
> Not specified
>
> Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image
> due to libsdl.so
>
>
>
> 1.1
>
> *Multimedia*
>
>
>
> Works well in sugarbay/n450/eMenlow/crownbay
>
>
>
>
>
> *ADT*
>
>
>
> Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
>
>
>
> 1.1 M3
>
>
>
> Verified Fixed Bugs:
>
> 1. Bug 1100 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>:
> [emenlow/crownbay-noemgd] X window could not start up with sato-sdk image
>
> 2. Bug 1108 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>:
> keyboard could not work in qemux86/x86-64
>
> 3. Bug 1093 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>:
> meta-toolchain-gmae: eglibc fails to build with 4.6
>
>
>
> Best Regards,
>
> Jiajun
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
@ 2011-05-31 23:10 ` Darren Hart
0 siblings, 0 replies; 7+ messages in thread
From: Darren Hart @ 2011-05-31 23:10 UTC (permalink / raw)
To: Xu, Jiajun; +Cc: yocto@yoctoproject.org, poky@pokylinux.org
On 05/31/2011 08:41 AM, Xu, Jiajun wrote:
> Hi all,
>
> This is the weekly test report for Yocto 1.1 M1 RC2 build. There
> is no new bugs found in this testing. 3 BLOCK issues found in RC1 are
> fixed. The only one block issue is beagleboard build failed on
> autobuilder.
I didn't see any bugs opened against Beagleboard mentioned below (nor
via a bugzilla query). Are there bugs opened against these build failures?
Thanks,
--
Darren
> There are still 9 old open bugs. Grub installation fail on
> 3 intel BSPs. Graphics testing on sugarbay is blocked.
>
> For bug fixing, the keyboard not work issue and toolchain not
> built out issue are fixed. Meanwhile, the cvs compile issue is marked as
> INVALID because it also fails on native. We also remove sudoku-savant
> compile test in qemu because such error may be caused by limited memory
> in qemu.
>
> If there is no new build for M1, QA will continue fullpass
> testing against RC2.
>
>
>
> *Test Summary*
>
> *---------------------------------------*
>
>
>
>
>
>
>
> *Test Result Summary*
>
>
>
>
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
>
>
>
>
> *BSP*
>
>
>
> SugarBay
>
>
>
> GOOD
>
>
>
> Graphics testing is blocked; soft keyboard will be triggered with
> terminal icon;
>
>
>
>
>
>
>
>
>
> CrownBay
>
>
>
> GOOD
>
>
>
> Grub installation failed;
>
>
>
>
>
>
>
>
>
> JasperForest
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> Blacksand
>
>
>
> GOOD
>
>
>
> Grub installation failed; S3 does not work;
>
>
>
>
>
>
>
>
>
> eMenlow
>
>
>
> GOOD
>
>
>
> System installation failed; S3 does not work;
>
>
>
>
>
>
>
>
>
> Beagleboard
>
>
>
> BLOCK
>
>
>
> Build failed
>
>
>
>
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> *QEMU*
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
>
>
> qemumips
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> *ADT*
>
>
>
>
>
>
>
> Buggy
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
> * *
>
>
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
>
>
>
>
>
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
>
>
>
>
>
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
>
>
>
>
>
>
> *Detailed Test Result for each component*
>
>
>
>
>
> *Target*
>
>
>
> *Total TCs***
>
>
>
> *Not Run*
>
>
>
> *Passed***
>
>
>
> *Failed***
>
>
>
> *Not testable (Blocked)***
>
>
>
>
>
> *Sugarbay Sato-SDK*
>
>
>
> 55
>
>
>
> 0
>
>
>
> 53
>
>
>
> 1 (bug 1101)
>
>
>
> 1 (bug 1112)
>
>
>
>
>
> *Crownbay Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 49
>
>
>
> 1 (bug 1099)
>
>
>
> 4
>
>
>
>
>
> *Jasperforest LSB-SDK*
>
>
>
> 31
>
>
>
> 0
>
>
>
> 31
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *n450 Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 613, 1099)
>
>
>
> 4
>
>
>
>
>
> *eMenlow Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 1099, 503)
>
>
>
> 4
>
>
>
>
>
> *Routerstationpro Sato-SDK*
>
>
>
> 29
>
>
>
> 0
>
>
>
> 29
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 26
>
>
>
> 4 (bug 766)
>
>
>
> 0
>
>
>
>
>
> *Qemux86-64 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86-64 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemumips Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemumips Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemuppc Sato*
>
>
>
> 20
>
>
>
> 0
>
>
>
> 19
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
>
>
> *Qemuppc Sato-SDK*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 25
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
>
>
> *Qemuarm Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemuarm Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *ADT*
>
>
>
> 6
>
>
>
> 0
>
>
>
> 5
>
>
>
> 1 (bug 414)
>
>
>
> 0
>
>
>
>
>
> *Total*
>
>
>
> 589
>
>
>
> 0
>
>
>
> 563
>
>
>
> 11
>
>
>
> 15
>
>
>
>
>
>
>
> * *
>
>
>
>
>
>
> * You can check the detailed test result in attachment for each target.
>
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
>
>
> *Commit Information*
>
> *---------------------------------------*
>
> Tree/Branch: Poky/1.1_M1
>
> Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
>
> Meta Branch: 1.1_M1
>
> Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
>
>
>
> *Issue Summary*
>
> *---------------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *Installation & Boot*
>
>
>
> Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk
> live image
>
>
>
> 1.1 M2
>
> *Power Mangement*
>
>
>
> Bug 613: [Blacksand]system cannot enter S3 standby mode
>
>
>
> 1.1
>
> Bug 503: [emenlow] system cannot enter S3 standby mode
>
>
>
> 1.1
>
> *Others*
>
>
>
> Bug 1101: keyboard pop up when clicking terminal icon
>
>
>
> 1.0 M2
>
> Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
>
>
>
> 1.1 M2
>
> Bug 1097: The mouse can not click accurate to the icons in qemumips X
>
>
>
> 1.1 M2
>
> *Graphics*
>
>
>
> Bug 1112: [sugarbay] mesa-demos should be added into sato image for
> graphics testing
>
>
>
> Not specified
>
> Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image
> due to libsdl.so
>
>
>
> 1.1
>
> *Multimedia*
>
>
>
> Works well in sugarbay/n450/eMenlow/crownbay
>
>
>
>
>
> *ADT*
>
>
>
> Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
>
>
>
> 1.1 M3
>
>
>
> Verified Fixed Bugs:
>
> 1. Bug 1100 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>:
> [emenlow/crownbay-noemgd] X window could not start up with sato-sdk image
>
> 2. Bug 1108 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>:
> keyboard could not work in qemux86/x86-64
>
> 3. Bug 1093 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>:
> meta-toolchain-gmae: eglibc fails to build with 4.6
>
>
>
> Best Regards,
>
> Jiajun
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
2011-05-31 15:41 Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528 Xu, Jiajun
2011-05-31 23:10 ` Darren Hart
@ 2011-06-01 19:03 ` Liu, Song
2011-06-01 20:30 ` Darren Hart
2011-06-01 21:37 ` [poky] " Saul Wold
1 sibling, 2 replies; 7+ messages in thread
From: Liu, Song @ 2011-06-01 19:03 UTC (permalink / raw)
To: Xu, Jiajun, Zanussi, Tom; +Cc: yocto@yoctoproject.org, poky@pokylinux.org
[-- Attachment #1: Type: text/plain, Size: 5623 bytes --]
I don’t see anyone reply to this. Which bug is opened for the Beagleboard BSP build failure? It seem to be a critical issue.
Tom, shall you or someone else look into this?
Song
From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Xu, Jiajun
Sent: Tuesday, May 31, 2011 8:41 AM
To: poky@pokylinux.org; yocto@yoctoproject.org
Subject: [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
Hi all,
This is the weekly test report for Yocto 1.1 M1 RC2 build. There is no new bugs found in this testing. 3 BLOCK issues found in RC1 are fixed. The only one block issue is beagleboard build failed on autobuilder. There are still 9 old open bugs. Grub installation fail on 3 intel BSPs. Graphics testing on sugarbay is blocked.
For bug fixing, the keyboard not work issue and toolchain not built out issue are fixed. Meanwhile, the cvs compile issue is marked as INVALID because it also fails on native. We also remove sudoku-savant compile test in qemu because such error may be caused by limited memory in qemu.
If there is no new build for M1, QA will continue fullpass testing against RC2.
Test Summary
---------------------------------------
Test Result Summary
Component
Target
Status
Comments
BSP
SugarBay
GOOD
Graphics testing is blocked; soft keyboard will be triggered with terminal icon;
CrownBay
GOOD
Grub installation failed;
JasperForest
GOOD
Everything runs well
Blacksand
GOOD
Grub installation failed; S3 does not work;
eMenlow
GOOD
System installation failed; S3 does not work;
Beagleboard
BLOCK
Build failed
Routerstationpro
GOOD
Everything runs well
Mpc8315e-rdb
GOOD
Everything runs well
QEMU
qemux86
GOOD
Everything runs well
qemux86-64
GOOD
Everything runs well
qemuarm
GOOD
Everything runs well
qemuppc
GOOD
unfs does not work with qemuppc
qemumips
GOOD
Everything runs well
ADT
Buggy
unfs does not work with qemuppc
Critical bugs, more than 50% test cases are blocked
Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
Normal, Major and Critical bugs, more than 10% test cases failed
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Sugarbay Sato-SDK
55
0
53
1 (bug 1101)
1 (bug 1112)
Crownbay Sato-SDK
54
0
49
1 (bug 1099)
4
Jasperforest LSB-SDK
31
0
31
0
0
n450 Sato-SDK
54
0
48
2 (bug 613, 1099)
4
eMenlow Sato-SDK
54
0
48
2 (bug 1099, 503)
4
Routerstationpro Sato-SDK
29
0
29
0
0
Mpc8315e-rdb Sato-SDK
30
0
26
4 (bug 766)
0
Qemux86-64 Sato
27
0
27
0
0
Qemux86-64 Sato-SDK
30
0
30
0
0
Qemux86 Sato
27
0
27
0
0
Qemux86 Sato-SDK
30
0
30
0
0
Qemumips Sato
26
0
26
0
0
Qemumips Sato-SDK
32
0
32
0
0
Qemuppc Sato
20
0
19
0
1 (bug 414)
Qemuppc Sato-SDK
26
0
25
0
1 (bug 414)
Qemuarm Sato
26
0
26
0
0
Qemuarm Sato-SDK
32
0
32
0
0
ADT
6
0
5
1 (bug 414)
0
Total
589
0
563
11
15
* You can check the detailed test result in attachment for each target.
** The failed/blocked case number is listed with failed cases’ bug number.
Commit Information
---------------------------------------
Tree/Branch: Poky/1.1_M1
Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
Meta Branch: 1.1_M1
Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
Issue Summary
---------------------------------------
Component
Bug Number
Target Milestone
System & Core OS
Installation & Boot
Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk live image
1.1 M2
Power Mangement
Bug 613: [Blacksand]system cannot enter S3 standby mode
1.1
Bug 503: [emenlow] system cannot enter S3 standby mode
1.1
Others
Bug 1101: keyboard pop up when clicking terminal icon
1.0 M2
Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
1.1 M2
Bug 1097: The mouse can not click accurate to the icons in qemumips X
1.1 M2
Graphics
Bug 1112: [sugarbay] mesa-demos should be added into sato image for graphics testing
Not specified
Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image due to libsdl.so
1.1
Multimedia
Works well in sugarbay/n450/eMenlow/crownbay
ADT
Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
1.1 M3
Verified Fixed Bugs:
1. Bug 1100<http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>: [emenlow/crownbay-noemgd] X window could not start up with sato-sdk image
2. Bug 1108<http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>: keyboard could not work in qemux86/x86-64
3. Bug 1093<http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>: meta-toolchain-gmae: eglibc fails to build with 4.6
Best Regards,
Jiajun
[-- Attachment #2: Type: text/html, Size: 120519 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
2011-06-01 19:03 ` Liu, Song
@ 2011-06-01 20:30 ` Darren Hart
2011-06-01 21:37 ` [poky] " Saul Wold
1 sibling, 0 replies; 7+ messages in thread
From: Darren Hart @ 2011-06-01 20:30 UTC (permalink / raw)
To: Liu, Song; +Cc: poky@pokylinux.org, yocto@yoctoproject.org
On 06/01/2011 12:03 PM, Liu, Song wrote:
> I don’t see anyone reply to this. Which bug is opened for the
> Beagleboard BSP build failure? It seem to be a critical issue.
>
>
>
> Tom, shall you or someone else look into this?
I am responsible for the Yocto beagleboard support. I was just asking to
get the bugs opened so I can track them.
--
Darren
>
>
>
> Song
>
>
>
> *From:*poky-bounces@yoctoproject.org
> [mailto:poky-bounces@yoctoproject.org] *On Behalf Of *Xu, Jiajun
> *Sent:* Tuesday, May 31, 2011 8:41 AM
> *To:* poky@pokylinux.org; yocto@yoctoproject.org
> *Subject:* [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
>
>
>
> Hi all,
>
> This is the weekly test report for Yocto 1.1 M1 RC2 build. There
> is no new bugs found in this testing. 3 BLOCK issues found in RC1 are
> fixed. The only one block issue is beagleboard build failed on
> autobuilder. There are still 9 old open bugs. Grub installation fail on
> 3 intel BSPs. Graphics testing on sugarbay is blocked.
>
> For bug fixing, the keyboard not work issue and toolchain not
> built out issue are fixed. Meanwhile, the cvs compile issue is marked as
> INVALID because it also fails on native. We also remove sudoku-savant
> compile test in qemu because such error may be caused by limited memory
> in qemu.
>
> If there is no new build for M1, QA will continue fullpass
> testing against RC2.
>
>
>
> *Test Summary*
>
> *---------------------------------------*
>
>
>
>
>
>
>
> *Test Result Summary*
>
>
>
>
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
>
>
>
>
> *BSP*
>
>
>
> SugarBay
>
>
>
> GOOD
>
>
>
> Graphics testing is blocked; soft keyboard will be triggered with
> terminal icon;
>
>
>
>
>
>
>
>
>
> CrownBay
>
>
>
> GOOD
>
>
>
> Grub installation failed;
>
>
>
>
>
>
>
>
>
> JasperForest
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> Blacksand
>
>
>
> GOOD
>
>
>
> Grub installation failed; S3 does not work;
>
>
>
>
>
>
>
>
>
> eMenlow
>
>
>
> GOOD
>
>
>
> System installation failed; S3 does not work;
>
>
>
>
>
>
>
>
>
> Beagleboard
>
>
>
> BLOCK
>
>
>
> Build failed
>
>
>
>
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> *QEMU*
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
>
>
> qemumips
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> *ADT*
>
>
>
>
>
>
>
> Buggy
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
> * *
>
>
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
>
>
>
>
>
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
>
>
>
>
>
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
>
>
>
>
>
>
> *Detailed Test Result for each component*
>
>
>
>
>
> *Target*
>
>
>
> *Total TCs***
>
>
>
> *Not Run*
>
>
>
> *Passed***
>
>
>
> *Failed***
>
>
>
> *Not testable (Blocked)***
>
>
>
>
>
> *Sugarbay Sato-SDK*
>
>
>
> 55
>
>
>
> 0
>
>
>
> 53
>
>
>
> 1 (bug 1101)
>
>
>
> 1 (bug 1112)
>
>
>
>
>
> *Crownbay Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 49
>
>
>
> 1 (bug 1099)
>
>
>
> 4
>
>
>
>
>
> *Jasperforest LSB-SDK*
>
>
>
> 31
>
>
>
> 0
>
>
>
> 31
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *n450 Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 613, 1099)
>
>
>
> 4
>
>
>
>
>
> *eMenlow Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 1099, 503)
>
>
>
> 4
>
>
>
>
>
> *Routerstationpro Sato-SDK*
>
>
>
> 29
>
>
>
> 0
>
>
>
> 29
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 26
>
>
>
> 4 (bug 766)
>
>
>
> 0
>
>
>
>
>
> *Qemux86-64 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86-64 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemux86 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemumips Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemumips Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemuppc Sato*
>
>
>
> 20
>
>
>
> 0
>
>
>
> 19
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
>
>
> *Qemuppc Sato-SDK*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 25
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
>
>
> *Qemuarm Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *Qemuarm Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
>
>
> *ADT*
>
>
>
> 6
>
>
>
> 0
>
>
>
> 5
>
>
>
> 1 (bug 414)
>
>
>
> 0
>
>
>
>
>
> *Total*
>
>
>
> 589
>
>
>
> 0
>
>
>
> 563
>
>
>
> 11
>
>
>
> 15
>
>
>
>
>
>
>
> * *
>
>
>
>
>
>
> * You can check the detailed test result in attachment for each target.
>
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
>
>
> *Commit Information*
>
> *---------------------------------------*
>
> Tree/Branch: Poky/1.1_M1
>
> Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
>
> Meta Branch: 1.1_M1
>
> Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
>
>
>
> *Issue Summary*
>
> *---------------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *Installation & Boot*
>
>
>
> Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk
> live image
>
>
>
> 1.1 M2
>
> *Power Mangement*
>
>
>
> Bug 613: [Blacksand]system cannot enter S3 standby mode
>
>
>
> 1.1
>
> Bug 503: [emenlow] system cannot enter S3 standby mode
>
>
>
> 1.1
>
> *Others*
>
>
>
> Bug 1101: keyboard pop up when clicking terminal icon
>
>
>
> 1.0 M2
>
> Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
>
>
>
> 1.1 M2
>
> Bug 1097: The mouse can not click accurate to the icons in qemumips X
>
>
>
> 1.1 M2
>
> *Graphics*
>
>
>
> Bug 1112: [sugarbay] mesa-demos should be added into sato image for
> graphics testing
>
>
>
> Not specified
>
> Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image
> due to libsdl.so
>
>
>
> 1.1
>
> *Multimedia*
>
>
>
> Works well in sugarbay/n450/eMenlow/crownbay
>
>
>
>
>
> *ADT*
>
>
>
> Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
>
>
>
> 1.1 M3
>
>
>
> Verified Fixed Bugs:
>
> 1. Bug 1100 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>:
> [emenlow/crownbay-noemgd] X window could not start up with sato-sdk image
>
> 2. Bug 1108 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>:
> keyboard could not work in qemux86/x86-64
>
> 3. Bug 1093 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>:
> meta-toolchain-gmae: eglibc fails to build with 4.6
>
>
>
> Best Regards,
>
> Jiajun
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
2011-06-01 19:03 ` Liu, Song
@ 2011-06-01 21:37 ` Saul Wold
2011-06-01 21:37 ` [poky] " Saul Wold
1 sibling, 0 replies; 7+ messages in thread
From: Saul Wold @ 2011-06-01 21:37 UTC (permalink / raw)
To: Liu, Song; +Cc: poky@pokylinux.org, yocto@yoctoproject.org
On 06/01/2011 12:03 PM, Liu, Song wrote:
> I don’t see anyone reply to this. Which bug is opened for the
> Beagleboard BSP build failure? It seem to be a critical issue.
>
> Tom, shall you or someone else look into this?
>
Darren and I are looking into this, the 3 beagleboard bugs are
1) qt4-x11-free does not compile, which blocks -sdk images, there is a
gcc patch that I am working to integrate today (1130), which has been
know about and I had a partial work around that was rejected.
2) Wrong terminal is getting set someplace, Darren and Beth are looking
at that. (1131)
3) qemu-config blocks non-gplv3 build, this was know and a fix just went
into master.
more below.
> Song
>
> *From:*poky-bounces@yoctoproject.org
> [mailto:poky-bounces@yoctoproject.org] *On Behalf Of *Xu, Jiajun
> *Sent:* Tuesday, May 31, 2011 8:41 AM
> *To:* poky@pokylinux.org; yocto@yoctoproject.org
> *Subject:* [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
>
> Hi all,
>
> This is the weekly test report for Yocto 1.1 M1 RC2 build. There is no
> new bugs found in this testing. 3 BLOCK issues found in RC1 are fixed.
> The only one block issue is beagleboard build failed on autobuilder.
> There are still 9 old open bugs. Grub installation fail on 3 intel BSPs.
> Graphics testing on sugarbay is blocked.
>
One question about the sugarbay, was how was this tested before, or is
this a new requirement? If it's new then it's not really blocking, the
question is should mesa-demos be on all environments or just on targets
that need them? In which case this should be added to a sugarbay
specific build.
> For bug fixing, the keyboard not work issue and toolchain not built out
> issue are fixed. Meanwhile, the cvs compile issue is marked as INVALID
> because it also fails on native. We also remove sudoku-savant compile
> test in qemu because such error may be caused by limited memory in qemu.
>
> If there is no new build for M1, QA will continue fullpass testing
> against RC2.
>
> *Test Summary*
>
> *---------------------------------------*
>
>
>
>
>
>
>
> *Test Result Summary*
>
>
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
>
>
> *BSP*
>
>
>
> SugarBay
>
>
>
> GOOD
>
>
>
> Graphics testing is blocked; soft keyboard will be triggered with
> terminal icon;
>
>
>
>
>
>
>
> CrownBay
>
>
>
> GOOD
>
>
>
> Grub installation failed;
>
>
>
>
>
>
>
> JasperForest
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> Blacksand
>
>
>
> GOOD
>
>
>
> Grub installation failed; S3 does not work;
>
>
>
>
>
>
>
> eMenlow
>
>
>
> GOOD
>
>
>
> System installation failed; S3 does not work;
>
>
>
>
>
>
>
> Beagleboard
>
>
>
> BLOCK
>
>
>
> Build failed
>
>
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
> *QEMU*
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
> qemumips
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
> *ADT*
>
>
>
>
>
>
>
> Buggy
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
> **
>
>
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
>
>
>
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
>
>
>
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
>
>
>
>
> *Detailed Test Result for each component*
>
>
>
> *Target*
>
>
>
> *Total TCs***
>
>
>
> *Not Run*
>
>
>
> *Passed***
>
>
>
> *Failed***
>
>
>
> *Not testable (Blocked)***
>
>
>
> *Sugarbay Sato-SDK*
>
>
>
> 55
>
>
>
> 0
>
>
>
> 53
>
>
>
> 1 (bug 1101)
>
>
>
> 1 (bug 1112)
>
>
>
> *Crownbay Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 49
>
>
>
> 1 (bug 1099)
>
>
>
> 4
>
>
>
> *Jasperforest LSB-SDK*
>
>
>
> 31
>
>
>
> 0
>
>
>
> 31
>
>
>
> 0
>
>
>
> 0
>
>
>
> *n450 Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 613, 1099)
>
>
>
> 4
>
>
>
> *eMenlow Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 1099, 503)
>
>
>
> 4
>
>
>
> *Routerstationpro Sato-SDK*
>
>
>
> 29
>
>
>
> 0
>
>
>
> 29
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 26
>
>
>
> 4 (bug 766)
>
>
>
> 0
>
>
>
> *Qemux86-64 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86-64 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemumips Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemumips Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemuppc Sato*
>
>
>
> 20
>
>
>
> 0
>
>
>
> 19
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
> *Qemuppc Sato-SDK*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 25
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
> *Qemuarm Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemuarm Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
> *ADT*
>
>
>
> 6
>
>
>
> 0
>
>
>
> 5
>
>
>
> 1 (bug 414)
>
>
>
> 0
>
>
>
> *Total*
>
>
>
> 589
>
>
>
> 0
>
>
>
> 563
>
>
>
> 11
>
>
>
> 15
>
>
>
>
>
> **
>
>
>
>
>
>
> * You can check the detailed test result in attachment for each target.
>
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
> *Commit Information*
>
> *---------------------------------------*
>
> Tree/Branch: Poky/1.1_M1
>
> Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
>
> Meta Branch: 1.1_M1
>
> Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
>
> *Issue Summary*
>
> *---------------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *Installation & Boot*
>
>
>
> Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk
> live image
>
>
>
> 1.1 M2
>
> *Power Mangement*
>
>
>
> Bug 613: [Blacksand]system cannot enter S3 standby mode
>
>
>
> 1.1
>
> Bug 503: [emenlow] system cannot enter S3 standby mode
>
>
>
> 1.1
>
> *Others*
>
>
>
> Bug 1101: keyboard pop up when clicking terminal icon
>
>
>
> 1.0 M2
>
> Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
>
>
>
> 1.1 M2
>
> Bug 1097: The mouse can not click accurate to the icons in qemumips X
>
>
>
> 1.1 M2
>
> *Graphics*
>
>
>
> Bug 1112: [sugarbay] mesa-demos should be added into sato image for
> graphics testing
>
>
>
> Not specified
>
> Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image
> due to libsdl.so
>
>
>
> 1.1
>
> *Multimedia*
>
>
>
> Works well in sugarbay/n450/eMenlow/crownbay
>
>
>
>
>
> *ADT*
>
>
>
> Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
>
>
>
> 1.1 M3
>
> Verified Fixed Bugs:
>
> 1.Bug 1100 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>:
> [emenlow/crownbay-noemgd] X window could not start up with sato-sdk image
>
> 2.Bug 1108 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>:
> keyboard could not work in qemux86/x86-64
>
> 3.Bug 1093 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>:
> meta-toolchain-gmae: eglibc fails to build with 4.6
>
> Best Regards,
>
> Jiajun
>
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
@ 2011-06-01 21:37 ` Saul Wold
0 siblings, 0 replies; 7+ messages in thread
From: Saul Wold @ 2011-06-01 21:37 UTC (permalink / raw)
To: Liu, Song; +Cc: poky@pokylinux.org, yocto@yoctoproject.org
On 06/01/2011 12:03 PM, Liu, Song wrote:
> I don’t see anyone reply to this. Which bug is opened for the
> Beagleboard BSP build failure? It seem to be a critical issue.
>
> Tom, shall you or someone else look into this?
>
Darren and I are looking into this, the 3 beagleboard bugs are
1) qt4-x11-free does not compile, which blocks -sdk images, there is a
gcc patch that I am working to integrate today (1130), which has been
know about and I had a partial work around that was rejected.
2) Wrong terminal is getting set someplace, Darren and Beth are looking
at that. (1131)
3) qemu-config blocks non-gplv3 build, this was know and a fix just went
into master.
more below.
> Song
>
> *From:*poky-bounces@yoctoproject.org
> [mailto:poky-bounces@yoctoproject.org] *On Behalf Of *Xu, Jiajun
> *Sent:* Tuesday, May 31, 2011 8:41 AM
> *To:* poky@pokylinux.org; yocto@yoctoproject.org
> *Subject:* [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528
>
> Hi all,
>
> This is the weekly test report for Yocto 1.1 M1 RC2 build. There is no
> new bugs found in this testing. 3 BLOCK issues found in RC1 are fixed.
> The only one block issue is beagleboard build failed on autobuilder.
> There are still 9 old open bugs. Grub installation fail on 3 intel BSPs.
> Graphics testing on sugarbay is blocked.
>
One question about the sugarbay, was how was this tested before, or is
this a new requirement? If it's new then it's not really blocking, the
question is should mesa-demos be on all environments or just on targets
that need them? In which case this should be added to a sugarbay
specific build.
> For bug fixing, the keyboard not work issue and toolchain not built out
> issue are fixed. Meanwhile, the cvs compile issue is marked as INVALID
> because it also fails on native. We also remove sudoku-savant compile
> test in qemu because such error may be caused by limited memory in qemu.
>
> If there is no new build for M1, QA will continue fullpass testing
> against RC2.
>
> *Test Summary*
>
> *---------------------------------------*
>
>
>
>
>
>
>
> *Test Result Summary*
>
>
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
>
>
> *BSP*
>
>
>
> SugarBay
>
>
>
> GOOD
>
>
>
> Graphics testing is blocked; soft keyboard will be triggered with
> terminal icon;
>
>
>
>
>
>
>
> CrownBay
>
>
>
> GOOD
>
>
>
> Grub installation failed;
>
>
>
>
>
>
>
> JasperForest
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> Blacksand
>
>
>
> GOOD
>
>
>
> Grub installation failed; S3 does not work;
>
>
>
>
>
>
>
> eMenlow
>
>
>
> GOOD
>
>
>
> System installation failed; S3 does not work;
>
>
>
>
>
>
>
> Beagleboard
>
>
>
> BLOCK
>
>
>
> Build failed
>
>
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
> *QEMU*
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
> qemumips
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
> *ADT*
>
>
>
>
>
>
>
> Buggy
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
> **
>
>
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
>
>
>
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
>
>
>
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
>
>
>
>
> *Detailed Test Result for each component*
>
>
>
> *Target*
>
>
>
> *Total TCs***
>
>
>
> *Not Run*
>
>
>
> *Passed***
>
>
>
> *Failed***
>
>
>
> *Not testable (Blocked)***
>
>
>
> *Sugarbay Sato-SDK*
>
>
>
> 55
>
>
>
> 0
>
>
>
> 53
>
>
>
> 1 (bug 1101)
>
>
>
> 1 (bug 1112)
>
>
>
> *Crownbay Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 49
>
>
>
> 1 (bug 1099)
>
>
>
> 4
>
>
>
> *Jasperforest LSB-SDK*
>
>
>
> 31
>
>
>
> 0
>
>
>
> 31
>
>
>
> 0
>
>
>
> 0
>
>
>
> *n450 Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 613, 1099)
>
>
>
> 4
>
>
>
> *eMenlow Sato-SDK*
>
>
>
> 54
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 1099, 503)
>
>
>
> 4
>
>
>
> *Routerstationpro Sato-SDK*
>
>
>
> 29
>
>
>
> 0
>
>
>
> 29
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 26
>
>
>
> 4 (bug 766)
>
>
>
> 0
>
>
>
> *Qemux86-64 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86-64 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86 Sato*
>
>
>
> 27
>
>
>
> 0
>
>
>
> 27
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86 Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 30
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemumips Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemumips Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemuppc Sato*
>
>
>
> 20
>
>
>
> 0
>
>
>
> 19
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
> *Qemuppc Sato-SDK*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 25
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
> *Qemuarm Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemuarm Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
> *ADT*
>
>
>
> 6
>
>
>
> 0
>
>
>
> 5
>
>
>
> 1 (bug 414)
>
>
>
> 0
>
>
>
> *Total*
>
>
>
> 589
>
>
>
> 0
>
>
>
> 563
>
>
>
> 11
>
>
>
> 15
>
>
>
>
>
> **
>
>
>
>
>
>
> * You can check the detailed test result in attachment for each target.
>
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
> *Commit Information*
>
> *---------------------------------------*
>
> Tree/Branch: Poky/1.1_M1
>
> Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
>
> Meta Branch: 1.1_M1
>
> Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
>
> *Issue Summary*
>
> *---------------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *Installation & Boot*
>
>
>
> Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk
> live image
>
>
>
> 1.1 M2
>
> *Power Mangement*
>
>
>
> Bug 613: [Blacksand]system cannot enter S3 standby mode
>
>
>
> 1.1
>
> Bug 503: [emenlow] system cannot enter S3 standby mode
>
>
>
> 1.1
>
> *Others*
>
>
>
> Bug 1101: keyboard pop up when clicking terminal icon
>
>
>
> 1.0 M2
>
> Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
>
>
>
> 1.1 M2
>
> Bug 1097: The mouse can not click accurate to the icons in qemumips X
>
>
>
> 1.1 M2
>
> *Graphics*
>
>
>
> Bug 1112: [sugarbay] mesa-demos should be added into sato image for
> graphics testing
>
>
>
> Not specified
>
> Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image
> due to libsdl.so
>
>
>
> 1.1
>
> *Multimedia*
>
>
>
> Works well in sugarbay/n450/eMenlow/crownbay
>
>
>
>
>
> *ADT*
>
>
>
> Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
>
>
>
> 1.1 M3
>
> Verified Fixed Bugs:
>
> 1.Bug 1100 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>:
> [emenlow/crownbay-noemgd] X window could not start up with sato-sdk image
>
> 2.Bug 1108 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>:
> keyboard could not work in qemux86/x86-64
>
> 3.Bug 1093 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>:
> meta-toolchain-gmae: eglibc fails to build with 4.6
>
> Best Regards,
>
> Jiajun
>
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-06-01 21:37 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-31 15:41 Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528 Xu, Jiajun
2011-05-31 23:10 ` [yocto] " Darren Hart
2011-05-31 23:10 ` Darren Hart
2011-06-01 19:03 ` Liu, Song
2011-06-01 20:30 ` Darren Hart
2011-06-01 21:37 ` Saul Wold
2011-06-01 21:37 ` [poky] " Saul Wold
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.