From: Anthony Liguori <aliguori@us.ibm.com>
To: Glauber Costa <glommer@redhat.com>
Cc: kvm@vger.kernel.org, mtosatti@redhat.com, qemu-devel@nongnu.org,
avi@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3] Add an isa device for SGA
Date: Tue, 07 Jun 2011 14:17:34 -0500 [thread overview]
Message-ID: <4DEE794E.3050207@us.ibm.com> (raw)
In-Reply-To: <1305571508-3926-1-git-send-email-glommer@redhat.com>
On 05/16/2011 01:45 PM, Glauber Costa wrote:
> This patch adds a dummy legacy ISA device whose responsibility is to
> deploy sgabios, an option rom for a serial graphics adapter.
> The proposal is that this device is always-on when -nographics,
> but can otherwise be enable in any setup when -device sga is used.
>
> [v2: suggestions on qdev by Markus ]
> [v3: cleanups and documentation, per list suggestions ]
>
> Signed-off-by: Glauber Costa<glommer@redhat.com>
Applied. But I'd like to figure out what to do about sgabios.bin. I
think we should ship a copy.
Regards,
Anthony Liguori
> ---
> Makefile.target | 2 +-
> hw/pc.c | 9 ++++++++
> hw/sga.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 66 insertions(+), 1 deletions(-)
> create mode 100644 hw/sga.c
>
> diff --git a/Makefile.target b/Makefile.target
> index fdbdc6c..004ea7e 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -224,7 +224,7 @@ obj-$(CONFIG_KVM) += ivshmem.o
> # Hardware support
> obj-i386-y += vga.o
> obj-i386-y += mc146818rtc.o i8259.o pc.o
> -obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
> +obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
> obj-i386-y += vmport.o
> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
> obj-i386-y += extboot.o
> diff --git a/hw/pc.c b/hw/pc.c
> index 8d351ba..5a8e00a 100644
> --- a/hw/pc.c
> +++ b/hw/pc.c
> @@ -1096,6 +1096,15 @@ void pc_vga_init(PCIBus *pci_bus)
> isa_vga_init();
> }
> }
> +
> + /*
> + * sga does not suppress normal vga output. So a machine can have both a
> + * vga card and sga manually enabled. Output will be seen on both.
> + * For nographic case, sga is enabled at all times
> + */
> + if (display_type == DT_NOGRAPHIC) {
> + isa_create_simple("sga");
> + }
> }
>
> static void cpu_request_exit(void *opaque, int irq, int level)
> diff --git a/hw/sga.c b/hw/sga.c
> new file mode 100644
> index 0000000..7ef750a
> --- /dev/null
> +++ b/hw/sga.c
> @@ -0,0 +1,56 @@
> +/*
> + * QEMU dummy ISA device for loading sgabios option rom.
> + *
> + * Copyright (c) 2011 Glauber Costa, Red Hat Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + *
> + * sgabios code originally available at code.google.com/p/sgabios
> + *
> + */
> +#include "pci.h"
> +#include "pc.h"
> +#include "loader.h"
> +#include "sysemu.h"
> +
> +#define SGABIOS_FILENAME "sgabios.bin"
> +
> +typedef struct ISAGAState {
> + ISADevice dev;
> +} ISASGAState;
> +
> +static int isa_cirrus_vga_initfn(ISADevice *dev)
> +{
> + rom_add_vga(SGABIOS_FILENAME);
> + return 0;
> +}
> +
> +static ISADeviceInfo sga_info = {
> + .qdev.name = "sga",
> + .qdev.desc = "Serial Graphics Adapter",
> + .qdev.size = sizeof(ISASGAState),
> + .init = isa_cirrus_vga_initfn,
> +};
> +
> +static void sga_register(void)
> +{
> + isa_qdev_register(&sga_info);
> +}
> +
> +device_init(sga_register);
WARNING: multiple messages have this Message-ID (diff)
From: Anthony Liguori <aliguori@us.ibm.com>
To: Glauber Costa <glommer@redhat.com>
Cc: mtosatti@redhat.com, qemu-devel@nongnu.org, kvm@vger.kernel.org,
avi@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3] Add an isa device for SGA
Date: Tue, 07 Jun 2011 14:17:34 -0500 [thread overview]
Message-ID: <4DEE794E.3050207@us.ibm.com> (raw)
In-Reply-To: <1305571508-3926-1-git-send-email-glommer@redhat.com>
On 05/16/2011 01:45 PM, Glauber Costa wrote:
> This patch adds a dummy legacy ISA device whose responsibility is to
> deploy sgabios, an option rom for a serial graphics adapter.
> The proposal is that this device is always-on when -nographics,
> but can otherwise be enable in any setup when -device sga is used.
>
> [v2: suggestions on qdev by Markus ]
> [v3: cleanups and documentation, per list suggestions ]
>
> Signed-off-by: Glauber Costa<glommer@redhat.com>
Applied. But I'd like to figure out what to do about sgabios.bin. I
think we should ship a copy.
Regards,
Anthony Liguori
> ---
> Makefile.target | 2 +-
> hw/pc.c | 9 ++++++++
> hw/sga.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 66 insertions(+), 1 deletions(-)
> create mode 100644 hw/sga.c
>
> diff --git a/Makefile.target b/Makefile.target
> index fdbdc6c..004ea7e 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -224,7 +224,7 @@ obj-$(CONFIG_KVM) += ivshmem.o
> # Hardware support
> obj-i386-y += vga.o
> obj-i386-y += mc146818rtc.o i8259.o pc.o
> -obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
> +obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
> obj-i386-y += vmport.o
> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
> obj-i386-y += extboot.o
> diff --git a/hw/pc.c b/hw/pc.c
> index 8d351ba..5a8e00a 100644
> --- a/hw/pc.c
> +++ b/hw/pc.c
> @@ -1096,6 +1096,15 @@ void pc_vga_init(PCIBus *pci_bus)
> isa_vga_init();
> }
> }
> +
> + /*
> + * sga does not suppress normal vga output. So a machine can have both a
> + * vga card and sga manually enabled. Output will be seen on both.
> + * For nographic case, sga is enabled at all times
> + */
> + if (display_type == DT_NOGRAPHIC) {
> + isa_create_simple("sga");
> + }
> }
>
> static void cpu_request_exit(void *opaque, int irq, int level)
> diff --git a/hw/sga.c b/hw/sga.c
> new file mode 100644
> index 0000000..7ef750a
> --- /dev/null
> +++ b/hw/sga.c
> @@ -0,0 +1,56 @@
> +/*
> + * QEMU dummy ISA device for loading sgabios option rom.
> + *
> + * Copyright (c) 2011 Glauber Costa, Red Hat Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + *
> + * sgabios code originally available at code.google.com/p/sgabios
> + *
> + */
> +#include "pci.h"
> +#include "pc.h"
> +#include "loader.h"
> +#include "sysemu.h"
> +
> +#define SGABIOS_FILENAME "sgabios.bin"
> +
> +typedef struct ISAGAState {
> + ISADevice dev;
> +} ISASGAState;
> +
> +static int isa_cirrus_vga_initfn(ISADevice *dev)
> +{
> + rom_add_vga(SGABIOS_FILENAME);
> + return 0;
> +}
> +
> +static ISADeviceInfo sga_info = {
> + .qdev.name = "sga",
> + .qdev.desc = "Serial Graphics Adapter",
> + .qdev.size = sizeof(ISASGAState),
> + .init = isa_cirrus_vga_initfn,
> +};
> +
> +static void sga_register(void)
> +{
> + isa_qdev_register(&sga_info);
> +}
> +
> +device_init(sga_register);
next prev parent reply other threads:[~2011-06-07 19:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-16 18:45 [PATCH v3] Add an isa device for SGA Glauber Costa
2011-05-16 18:45 ` [Qemu-devel] " Glauber Costa
2011-06-07 19:17 ` Anthony Liguori [this message]
2011-06-07 19:17 ` Anthony Liguori
2011-06-07 20:30 ` Glauber Costa
2011-06-07 20:30 ` Glauber Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DEE794E.3050207@us.ibm.com \
--to=aliguori@us.ibm.com \
--cc=avi@redhat.com \
--cc=glommer@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.