[PATCH 00/11] Replace printk_rateilimit() with printk_ratelimited()

[PATCH 00/11] Replace printk_rateilimit() with printk_ratelimited()

[Manuel Zerpies]

Hi,

since the printk_ratelimit() function shouldn't be used anymore, I replaced it
in a few files with printk_ratelimited().

If you wish some more patches I can send more in.

Greets,
Manu

Manuel Zerpies (11):
  drivers/ide: use printk_ratelimited() instead of printk_ratelimit()
  drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
  net/can: use printk_ratelimited() instead of printk_ratelimit()
  net/rds: use prink_ratelimited() instead of printk_ratelimit()
  RDMA/hw/cxgb4: use printk_ratelimited() instead of printk_ratelimit()
  drivers/net: use printk_ratelimited() instead of printk_ratelimit()
  drivers/usb/atm: use printk_ratelimited() instead of
    printk_ratelimit()
  [SCSI] tcm_fc: use printk_ratelimited() instead of printk_ratelimit()
  xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()
  wusb: use printk_ratelimited() instead of printk_ratelimit()
  usb/class: use printk_ratelimited() instead of printk_ratelimit()

 drivers/ide/ide-atapi.c                |    4 ++--
 drivers/infiniband/hw/cxgb4/resource.c |    9 +++++----
 drivers/net/sc92031.c                  |   16 ++++++----------
 drivers/target/tcm_fc/tfc_io.c         |    4 ++--
 drivers/tty/moxa.c                     |    5 +++--
 drivers/tty/mxser.c                    |    4 ++--
 drivers/tty/tty_io.c                   |    4 ++--
 drivers/usb/atm/usbatm.c               |    4 ++--
 drivers/usb/class/usblp.c              |    7 +++----
 drivers/usb/wusbcore/wa-xfer.c         |    7 +++----
 drivers/xen/xenbus/xenbus_xs.c         |    4 ++--
 net/can/af_can.c                       |    5 +++--
 net/rds/bind.c                         |    4 ++--
 net/rds/ib_cm.c                        |    6 +++---
 net/rds/ib_send.c                      |    4 ++--
 net/rds/iw_cm.c                        |    9 ++++-----
 net/rds/iw_rdma.c                      |    9 +++++----
 net/rds/iw_send.c                      |    4 ++--
 net/rds/send.c                         |    7 +++----
 19 files changed, 56 insertions(+), 60 deletions(-)

-- 
1.7.4.1

[PATCH 01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/ide/ide-atapi.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 6f218e01..1b04f45 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -8,6 +8,7 @@
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 #include <linux/gfp.h>
+#include <linux/ratelimit.h>
 
 #include <scsi/scsi.h>
 
@@ -200,8 +201,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
 	err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
 			      GFP_NOIO);
 	if (unlikely(err)) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING PFX "%s: failed to map sense "
+		printk_ratelimited(KERN_WARNING PFX "%s: failed to map sense "
 					    "buffer\n", drive->name);
 		return;
 	}
-- 
1.7.4.1

Re: [PATCH 01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit()

[Borislav Petkov]

On Thu, Jun 16, 2011 at 02:06:37PM +0200, Manuel Zerpies wrote:
> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited().
> 
> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
> ---
>  drivers/ide/ide-atapi.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
> index 6f218e01..1b04f45 100644
> --- a/drivers/ide/ide-atapi.c
> +++ b/drivers/ide/ide-atapi.c
> @@ -8,6 +8,7 @@
>  #include <linux/ide.h>
>  #include <linux/scatterlist.h>
>  #include <linux/gfp.h>
> +#include <linux/ratelimit.h>
>  
>  #include <scsi/scsi.h>
>  
> @@ -200,8 +201,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
>  	err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
>  			      GFP_NOIO);
>  	if (unlikely(err)) {
> -		if (printk_ratelimit())
> -			printk(KERN_WARNING PFX "%s: failed to map sense "
> +		printk_ratelimited(KERN_WARNING PFX "%s: failed to map sense "
>  					    "buffer\n", drive->name);

Does the printk fit on one line if you do

	pr_warn_ratelimited(...)

instead?

Thanks.

-- 
Regards/Gruss,
Boris.

Re: [PATCH 01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Hello,
2011/6/16 Borislav Petkov <bp@alien8.de>
>
> On Thu, Jun 16, 2011 at 02:06:37PM +0200, Manuel Zerpies wrote:
>
> Does the printk fit on one line if you do
>
>        pr_warn_ratelimited(...)
>
> instead?
>
> Thanks.
>
> --
> Regards/Gruss,
> Boris.

No I'm affraid. I tried it, but it didn't fit the 80 chars per line
code-styling.

>Why not pr_warn_ratelimited()?
>WBR, Sergei

I just kind of ignored it. As you see, I built it in.

Here my new patch:

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().
Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/ide/ide-atapi.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 6f218e01..c9e69d7 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -8,6 +8,7 @@
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 #include <linux/gfp.h>
+#include <linux/ratelimit.h>

 #include <scsi/scsi.h>

@@ -200,9 +201,8 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
  err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
       GFP_NOIO);
  if (unlikely(err)) {
- if (printk_ratelimit())
- printk(KERN_WARNING PFX "%s: failed to map sense "
-    "buffer\n", drive->name);
+ pr_warn_ratelimited(PFX "%s: failed to map sense buffer\n",
+    drive->name);
  return;
  }

--
1.7.4.1

Re: [PATCH 01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Hello,
2011/6/16 Borislav Petkov <bp@alien8.de>
>
> On Thu, Jun 16, 2011 at 02:06:37PM +0200, Manuel Zerpies wrote:
>
> Does the printk fit on one line if you do
>
>        pr_warn_ratelimited(...)
>
> instead?
>
> Thanks.
>
> --
> Regards/Gruss,
> Boris.

No I'm affraid. I tried it, but it didn't fit the 80 chars per line
code-styling.

>Why not pr_warn_ratelimited()?
>WBR, Sergei

I just kind of ignored it. As you see, I built it in.

Here my new patch:

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().
Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/ide/ide-atapi.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 6f218e01..c9e69d7 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -8,6 +8,7 @@
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 #include <linux/gfp.h>
+#include <linux/ratelimit.h>

 #include <scsi/scsi.h>

@@ -200,9 +201,8 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
  err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
       GFP_NOIO);
  if (unlikely(err)) {
- if (printk_ratelimit())
- printk(KERN_WARNING PFX "%s: failed to map sense "
-    "buffer\n", drive->name);
+ pr_warn_ratelimited(PFX "%s: failed to map sense buffer\n",
+    drive->name);
  return;
  }

--
1.7.4.1

Re: [PATCH 01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit()

[Sergei Shtylyov]

Hello.

On 20-06-2011 12:17, Manuel Zerpies wrote:

>> Does the printk fit on one line if you do

>>         pr_warn_ratelimited(...)

>> instead?

>> Thanks.

>> --
>> Regards/Gruss,
>> Boris.

> No I'm affraid. I tried it, but it didn't fit the 80 chars per line
> code-styling.

    It's enough that the string literal fits on one line.

>> Why not pr_warn_ratelimited()?

>> WBR, Sergei

> I just kind of ignored it. As you see, I built it in.

> Here my new patch:

> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited().

    This doesn't match the patch anymore...

> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
> ---
>   drivers/ide/ide-atapi.c |    6 +++---
>   1 files changed, 3 insertions(+), 3 deletions(-)
> diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
> index 6f218e01..c9e69d7 100644
> --- a/drivers/ide/ide-atapi.c
> +++ b/drivers/ide/ide-atapi.c
> @@ -8,6 +8,7 @@
>   #include<linux/ide.h>
>   #include<linux/scatterlist.h>
>   #include<linux/gfp.h>
> +#include<linux/ratelimit.h>
>
>   #include<scsi/scsi.h>
>
> @@ -200,9 +201,8 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
>    err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
>         GFP_NOIO);
>    if (unlikely(err)) {
> - if (printk_ratelimit())
> - printk(KERN_WARNING PFX "%s: failed to map sense "
> -    "buffer\n", drive->name);
> + pr_warn_ratelimited(PFX "%s: failed to map sense buffer\n",
> +    drive->name);
>    return;
>    }

    Unfortunately, the new patch is whitespace-damaged.

WBR, Sergei

Re: [PATCH 01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit()

[Sergei Shtylyov]

Hello.

Manuel Zerpies wrote:

> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited().

> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
> ---
>  drivers/ide/ide-atapi.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)

> diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
> index 6f218e01..1b04f45 100644
> --- a/drivers/ide/ide-atapi.c
> +++ b/drivers/ide/ide-atapi.c
> @@ -8,6 +8,7 @@
>  #include <linux/ide.h>
>  #include <linux/scatterlist.h>
>  #include <linux/gfp.h>
> +#include <linux/ratelimit.h>
>  
>  #include <scsi/scsi.h>
>  
> @@ -200,8 +201,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
>  	err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
>  			      GFP_NOIO);
>  	if (unlikely(err)) {
> -		if (printk_ratelimit())
> -			printk(KERN_WARNING PFX "%s: failed to map sense "
> +		printk_ratelimited(KERN_WARNING PFX "%s: failed to map sense "

    Why not pr_warn_ratelimited()?

WBR, Sergei

[PATCH 02/11] drivers/tty: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since the printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/tty/moxa.c   |    5 +++--
 drivers/tty/mxser.c  |    4 ++--
 drivers/tty/tty_io.c |    4 ++--
 3 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index ba679ce..d15a071 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -44,6 +44,7 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
+#include <linux/ratelimit.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -242,8 +243,8 @@ static void moxa_wait_finish(void __iomem *ofsAddr)
 	while (readw(ofsAddr + FuncCode) != 0)
 		if (time_after(jiffies, end))
 			return;
-	if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit())
-		printk(KERN_WARNING "moxa function expired\n");
+	if (readw(ofsAddr + FuncCode) != 0)
+		printk_ratelimited(KERN_WARNING "moxa function expired\n");
 }
 
 static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index d188f37..7fc8c02 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -39,6 +39,7 @@
 #include <linux/pci.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
+#include <linux/ratelimit.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -1490,8 +1491,7 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 	switch (cmd) {
 	case MOXA_GET_MAJOR:
-		if (printk_ratelimit())
-			printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+		printk_ratelimited(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
 					"%x (GET_MAJOR), fix your userspace\n",
 					current->comm, cmd);
 		return put_user(ttymajor, (int __user *)argp);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 6556f74..150e4f7 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -94,6 +94,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/serial.h>
+#include <linux/ratelimit.h>
 
 #include <linux/uaccess.h>
 #include <asm/system.h>
@@ -1420,8 +1421,7 @@ err_module_put:
 
 	/* call the tty release_tty routine to clean out this slot */
 err_release_tty:
-	if (printk_ratelimit())
-		printk(KERN_INFO "tty_init_dev: ldisc open failed, "
+	printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
 				 "clearing slot %d\n", idx);
 	release_tty(tty, idx);
 	return ERR_PTR(retval);
-- 
1.7.4.1

[PATCH 03/11] net/can: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 net/can/af_can.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/can/af_can.c b/net/can/af_can.c
index 094fc53..8ce926d 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -58,6 +58,7 @@
 #include <linux/skbuff.h>
 #include <linux/can.h>
 #include <linux/can/core.h>
+#include <linux/ratelimit.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
 
@@ -161,8 +162,8 @@ static int can_create(struct net *net, struct socket *sock, int protocol,
 		 * return the error code immediately.  Below we will
 		 * return -EPROTONOSUPPORT
 		 */
-		if (err && printk_ratelimit())
-			printk(KERN_ERR "can: request_module "
+		if (err)
+			printk_ratelimited(KERN_ERR "can: request_module "
 			       "(can-proto-%d) failed.\n", protocol);
 
 		cp = can_get_proto(protocol);
-- 
1.7.4.1

[PATCH 03/11] net/can: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 net/can/af_can.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/can/af_can.c b/net/can/af_can.c
index 094fc53..8ce926d 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -58,6 +58,7 @@
 #include <linux/skbuff.h>
 #include <linux/can.h>
 #include <linux/can/core.h>
+#include <linux/ratelimit.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
 
@@ -161,8 +162,8 @@ static int can_create(struct net *net, struct socket *sock, int protocol,
 		 * return the error code immediately.  Below we will
 		 * return -EPROTONOSUPPORT
 		 */
-		if (err && printk_ratelimit())
-			printk(KERN_ERR "can: request_module "
+		if (err)
+			printk_ratelimited(KERN_ERR "can: request_module "
 			       "(can-proto-%d) failed.\n", protocol);
 
 		cp = can_get_proto(protocol);
-- 
1.7.4.1

Re: [PATCH 03/11] net/can: use printk_ratelimited() instead of printk_ratelimit()

[David Miller]

From: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
Date: Thu, 16 Jun 2011 14:08:01 +0200

> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited().
> 
> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>

Applied.

Re: [PATCH 03/11] net/can: use printk_ratelimited() instead of printk_ratelimit()

[David Miller]

From: Manuel Zerpies <manuel.f.zerpies-BvGhN7WtUVpvnyFi9AzMs1NpE/a5I+DW@public.gmane.org>
Date: Thu, 16 Jun 2011 14:08:01 +0200

> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited().
> 
> Signed-off-by: Manuel Zerpies <manuel.f.zerpies-BvGhN7WtUVpvnyFi9AzMs1NpE/a5I+DW@public.gmane.org>

Applied.

[PATCH 04/11] net/rds: use prink_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 net/rds/bind.c    |    4 ++--
 net/rds/ib_cm.c   |    6 +++---
 net/rds/ib_send.c |    4 ++--
 net/rds/iw_cm.c   |    9 ++++-----
 net/rds/iw_rdma.c |    9 +++++----
 net/rds/iw_send.c |    4 ++--
 net/rds/send.c    |    7 +++----
 7 files changed, 21 insertions(+), 22 deletions(-)

diff --git a/net/rds/bind.c b/net/rds/bind.c
index 2f6b3fc..637bde5 100644
--- a/net/rds/bind.c
+++ b/net/rds/bind.c
@@ -35,6 +35,7 @@
 #include <linux/in.h>
 #include <linux/if_arp.h>
 #include <linux/jhash.h>
+#include <linux/ratelimit.h>
 #include "rds.h"
 
 #define BIND_HASH_SIZE 1024
@@ -185,8 +186,7 @@ int rds_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 	if (!trans) {
 		ret = -EADDRNOTAVAIL;
 		rds_remove_bound(rs);
-		if (printk_ratelimit())
-			printk(KERN_INFO "RDS: rds_bind() could not find a transport, "
+		printk_ratelimited(KERN_INFO "RDS: rds_bind() could not find a transport, "
 				"load rds_tcp or rds_rdma?\n");
 		goto out;
 	}
diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
index fd453dd..cd67026 100644
--- a/net/rds/ib_cm.c
+++ b/net/rds/ib_cm.c
@@ -34,6 +34,7 @@
 #include <linux/in.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/ratelimit.h>
 
 #include "rds.h"
 #include "ib.h"
@@ -435,13 +436,12 @@ static u32 rds_ib_protocol_compatible(struct rdma_cm_event *event)
 		version = RDS_PROTOCOL_3_0;
 		while ((common >>= 1) != 0)
 			version++;
-	} else if (printk_ratelimit()) {
-		printk(KERN_NOTICE "RDS: Connection from %pI4 using "
+	}
+	printk_ratelimited(KERN_NOTICE "RDS: Connection from %pI4 using "
 			"incompatible protocol version %u.%u\n",
 			&dp->dp_saddr,
 			dp->dp_protocol_major,
 			dp->dp_protocol_minor);
-	}
 	return version;
 }
 
diff --git a/net/rds/ib_send.c b/net/rds/ib_send.c
index 7c4dce8..e590949 100644
--- a/net/rds/ib_send.c
+++ b/net/rds/ib_send.c
@@ -34,6 +34,7 @@
 #include <linux/in.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
+#include <linux/ratelimit.h>
 
 #include "rds.h"
 #include "ib.h"
@@ -207,8 +208,7 @@ static struct rds_message *rds_ib_send_unmap_op(struct rds_ib_connection *ic,
 		}
 		break;
 	default:
-		if (printk_ratelimit())
-			printk(KERN_NOTICE
+		printk_ratelimited(KERN_NOTICE
 			       "RDS/IB: %s: unexpected opcode 0x%x in WR!\n",
 			       __func__, send->s_wr.opcode);
 		break;
diff --git a/net/rds/iw_cm.c b/net/rds/iw_cm.c
index c12db66..9556d28 100644
--- a/net/rds/iw_cm.c
+++ b/net/rds/iw_cm.c
@@ -34,6 +34,7 @@
 #include <linux/in.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/ratelimit.h>
 
 #include "rds.h"
 #include "iw.h"
@@ -258,8 +259,7 @@ static int rds_iw_setup_qp(struct rds_connection *conn)
 	 */
 	rds_iwdev = ib_get_client_data(dev, &rds_iw_client);
 	if (!rds_iwdev) {
-		if (printk_ratelimit())
-			printk(KERN_NOTICE "RDS/IW: No client_data for device %s\n",
+		printk_ratelimited(KERN_NOTICE "RDS/IW: No client_data for device %s\n",
 					dev->name);
 		return -EOPNOTSUPP;
 	}
@@ -365,13 +365,12 @@ static u32 rds_iw_protocol_compatible(const struct rds_iw_connect_private *dp)
 		version = RDS_PROTOCOL_3_0;
 		while ((common >>= 1) != 0)
 			version++;
-	} else if (printk_ratelimit()) {
-		printk(KERN_NOTICE "RDS: Connection from %pI4 using "
+	}
+	printk_ratelimited(KERN_NOTICE "RDS: Connection from %pI4 using "
 			"incompatible protocol version %u.%u\n",
 			&dp->dp_saddr,
 			dp->dp_protocol_major,
 			dp->dp_protocol_minor);
-	}
 	return version;
 }
 
diff --git a/net/rds/iw_rdma.c b/net/rds/iw_rdma.c
index 6deaa77..8b77edb 100644
--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -32,6 +32,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/ratelimit.h>
 
 #include "rds.h"
 #include "iw.h"
@@ -729,8 +730,8 @@ static int rds_iw_rdma_build_fastreg(struct rds_iw_mapping *mapping)
 	failed_wr = &f_wr;
 	ret = ib_post_send(ibmr->cm_id->qp, &f_wr, &failed_wr);
 	BUG_ON(failed_wr != &f_wr);
-	if (ret && printk_ratelimit())
-		printk(KERN_WARNING "RDS/IW: %s:%d ib_post_send returned %d\n",
+	if (ret)
+		printk_ratelimited(KERN_WARNING "RDS/IW: %s:%d ib_post_send returned %d\n",
 			__func__, __LINE__, ret);
 	return ret;
 }
@@ -751,8 +752,8 @@ static int rds_iw_rdma_fastreg_inv(struct rds_iw_mr *ibmr)
 
 	failed_wr = &s_wr;
 	ret = ib_post_send(ibmr->cm_id->qp, &s_wr, &failed_wr);
-	if (ret && printk_ratelimit()) {
-		printk(KERN_WARNING "RDS/IW: %s:%d ib_post_send returned %d\n",
+	if (ret) {
+		printk_ratelimited(KERN_WARNING "RDS/IW: %s:%d ib_post_send returned %d\n",
 			__func__, __LINE__, ret);
 		goto out;
 	}
diff --git a/net/rds/iw_send.c b/net/rds/iw_send.c
index 545d8ee..e40c3c5 100644
--- a/net/rds/iw_send.c
+++ b/net/rds/iw_send.c
@@ -34,6 +34,7 @@
 #include <linux/in.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
+#include <linux/ratelimit.h>
 
 #include "rds.h"
 #include "iw.h"
@@ -258,8 +259,7 @@ void rds_iw_send_cq_comp_handler(struct ib_cq *cq, void *context)
 				 * when the SEND completes. */
 				break;
 			default:
-				if (printk_ratelimit())
-					printk(KERN_NOTICE
+				printk_ratelimited(KERN_NOTICE
 						"RDS/IW: %s: unexpected opcode 0x%x in WR!\n",
 						__func__, send->s_wr.opcode);
 				break;
diff --git a/net/rds/send.c b/net/rds/send.c
index d58ae5f..aa57e22 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -35,6 +35,7 @@
 #include <net/sock.h>
 #include <linux/in.h>
 #include <linux/list.h>
+#include <linux/ratelimit.h>
 
 #include "rds.h"
 
@@ -1006,16 +1007,14 @@ int rds_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
 		goto out;
 
 	if (rm->rdma.op_active && !conn->c_trans->xmit_rdma) {
-		if (printk_ratelimit())
-			printk(KERN_NOTICE "rdma_op %p conn xmit_rdma %p\n",
+		printk_ratelimited(KERN_NOTICE "rdma_op %p conn xmit_rdma %p\n",
 			       &rm->rdma, conn->c_trans->xmit_rdma);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
 
 	if (rm->atomic.op_active && !conn->c_trans->xmit_atomic) {
-		if (printk_ratelimit())
-			printk(KERN_NOTICE "atomic_op %p conn xmit_atomic %p\n",
+		printk_ratelimited(KERN_NOTICE "atomic_op %p conn xmit_atomic %p\n",
 			       &rm->atomic, conn->c_trans->xmit_atomic);
 		ret = -EOPNOTSUPP;
 		goto out;
-- 
1.7.4.1

Re: [PATCH 04/11] net/rds: use prink_ratelimited() instead of printk_ratelimit()

[David Miller]

From: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
Date: Thu, 16 Jun 2011 14:09:57 +0200

> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited()
> 
> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>

Applied.

[PATCH 05/11] RDMA/hw/cxgb4: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().

Signed-off-by: Manuel Zerpies <manuel.f.zerpies-BvGhN7WtUVpvnyFi9AzMs1NpE/a5I+DW@public.gmane.org>
---
 drivers/infiniband/hw/cxgb4/resource.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/resource.c b/drivers/infiniband/hw/cxgb4/resource.c
index 4fb50d5..407ff39 100644
--- a/drivers/infiniband/hw/cxgb4/resource.c
+++ b/drivers/infiniband/hw/cxgb4/resource.c
@@ -37,6 +37,7 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/genalloc.h>
+#include <linux/ratelimit.h>
 #include "iw_cxgb4.h"
 
 #define RANDOM_SIZE 16
@@ -311,8 +312,8 @@ u32 c4iw_pblpool_alloc(struct c4iw_rdev *rdev, int size)
 {
 	unsigned long addr = gen_pool_alloc(rdev->pbl_pool, size);
 	PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size);
-	if (!addr && printk_ratelimit())
-		printk(KERN_WARNING MOD "%s: Out of PBL memory\n",
+	if (!addr)
+		printk_ratelimited(KERN_WARNING MOD "%s: Out of PBL memory\n",
 		       pci_name(rdev->lldi.pdev));
 	return (u32)addr;
 }
@@ -373,8 +374,8 @@ u32 c4iw_rqtpool_alloc(struct c4iw_rdev *rdev, int size)
 {
 	unsigned long addr = gen_pool_alloc(rdev->rqt_pool, size << 6);
 	PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size << 6);
-	if (!addr && printk_ratelimit())
-		printk(KERN_WARNING MOD "%s: Out of RQT memory\n",
+	if (!addr)
+		printk_ratelimited(KERN_WARNING MOD "%s: Out of RQT memory\n",
 		       pci_name(rdev->lldi.pdev));
 	return (u32)addr;
 }
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 05/11] RDMA/hw/cxgb4: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/infiniband/hw/cxgb4/resource.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/resource.c b/drivers/infiniband/hw/cxgb4/resource.c
index 4fb50d5..407ff39 100644
--- a/drivers/infiniband/hw/cxgb4/resource.c
+++ b/drivers/infiniband/hw/cxgb4/resource.c
@@ -37,6 +37,7 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/genalloc.h>
+#include <linux/ratelimit.h>
 #include "iw_cxgb4.h"
 
 #define RANDOM_SIZE 16
@@ -311,8 +312,8 @@ u32 c4iw_pblpool_alloc(struct c4iw_rdev *rdev, int size)
 {
 	unsigned long addr = gen_pool_alloc(rdev->pbl_pool, size);
 	PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size);
-	if (!addr && printk_ratelimit())
-		printk(KERN_WARNING MOD "%s: Out of PBL memory\n",
+	if (!addr)
+		printk_ratelimited(KERN_WARNING MOD "%s: Out of PBL memory\n",
 		       pci_name(rdev->lldi.pdev));
 	return (u32)addr;
 }
@@ -373,8 +374,8 @@ u32 c4iw_rqtpool_alloc(struct c4iw_rdev *rdev, int size)
 {
 	unsigned long addr = gen_pool_alloc(rdev->rqt_pool, size << 6);
 	PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size << 6);
-	if (!addr && printk_ratelimit())
-		printk(KERN_WARNING MOD "%s: Out of RQT memory\n",
+	if (!addr)
+		printk_ratelimited(KERN_WARNING MOD "%s: Out of RQT memory\n",
 		       pci_name(rdev->lldi.pdev));
 	return (u32)addr;
 }
-- 
1.7.4.1

Re: [PATCH 05/11] RDMA/hw/cxgb4: use printk_ratelimited() instead of printk_ratelimit()

[Roland Dreier]

Thanks, applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 05/11] RDMA/hw/cxgb4: use printk_ratelimited() instead of printk_ratelimit()

[Roland Dreier]

Thanks, applied.

[PATCH 06/11] drivers/net: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/net/sc92031.c |   16 ++++++----------
 1 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index fa74314..6f6bbb3 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -31,6 +31,7 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/crc32.h>
+#include <linux/ratelimit.h>
 
 #include <asm/irq.h>
 
@@ -536,8 +537,7 @@ static bool _sc92031_check_media(struct net_device *dev)
 
 		netif_carrier_on(dev);
 
-		if (printk_ratelimit())
-			printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
+		printk_ratelimited(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
 				dev->name,
 				speed_100 ? "100" : "10",
 				duplex_full ? "full" : "half");
@@ -549,8 +549,7 @@ static bool _sc92031_check_media(struct net_device *dev)
 
 		_sc92031_disable_tx_rx(dev);
 
-		if (printk_ratelimit())
-			printk(KERN_INFO "%s: link down\n", dev->name);
+		printk_ratelimited(KERN_INFO "%s: link down\n", dev->name);
 		return false;
 	}
 }
@@ -755,8 +754,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
 		return;
 
 	if (unlikely(rx_len > RX_BUF_LEN)) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "%s: rx packets length > rx buffer\n",
+		printk_ratelimited(KERN_ERR "%s: rx packets length > rx buffer\n",
 					dev->name);
 		return;
 	}
@@ -786,8 +784,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
 		}
 
 		if (unlikely(rx_size_align + 4 > rx_len)) {
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: rx_len is too small\n", dev->name);
+			printk_ratelimited(KERN_ERR "%s: rx_len is too small\n", dev->name);
 			break;
 		}
 
@@ -795,8 +792,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
 
 		skb = netdev_alloc_skb_ip_align(dev, pkt_size);
 		if (unlikely(!skb)) {
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
+			printk_ratelimited(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
 						dev->name, pkt_size);
 			goto next;
 		}
-- 
1.7.4.1

[PATCH 06/11] drivers/net: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/net/sc92031.c |   16 ++++++----------
 1 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index fa74314..6f6bbb3 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -31,6 +31,7 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/crc32.h>
+#include <linux/ratelimit.h>
 
 #include <asm/irq.h>
 
@@ -536,8 +537,7 @@ static bool _sc92031_check_media(struct net_device *dev)
 
 		netif_carrier_on(dev);
 
-		if (printk_ratelimit())
-			printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
+		printk_ratelimited(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
 				dev->name,
 				speed_100 ? "100" : "10",
 				duplex_full ? "full" : "half");
@@ -549,8 +549,7 @@ static bool _sc92031_check_media(struct net_device *dev)
 
 		_sc92031_disable_tx_rx(dev);
 
-		if (printk_ratelimit())
-			printk(KERN_INFO "%s: link down\n", dev->name);
+		printk_ratelimited(KERN_INFO "%s: link down\n", dev->name);
 		return false;
 	}
 }
@@ -755,8 +754,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
 		return;
 
 	if (unlikely(rx_len > RX_BUF_LEN)) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "%s: rx packets length > rx buffer\n",
+		printk_ratelimited(KERN_ERR "%s: rx packets length > rx buffer\n",
 					dev->name);
 		return;
 	}
@@ -786,8 +784,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
 		}
 
 		if (unlikely(rx_size_align + 4 > rx_len)) {
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: rx_len is too small\n", dev->name);
+			printk_ratelimited(KERN_ERR "%s: rx_len is too small\n", dev->name);
 			break;
 		}
 
@@ -795,8 +792,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
 
 		skb = netdev_alloc_skb_ip_align(dev, pkt_size);
 		if (unlikely(!skb)) {
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
+			printk_ratelimited(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
 						dev->name, pkt_size);
 			goto next;
 		}
-- 
1.7.4.1

Re: [PATCH 06/11] drivers/net: use printk_ratelimited() instead of printk_ratelimit()

[Joe Perches]

On Thu, 2011-06-16 at 14:12 +0200, Manuel Zerpies wrote:
> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited()
[]
> diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
[]
> @@ -536,8 +537,7 @@ static bool _sc92031_check_media(struct net_device *dev)
>  
>  		netif_carrier_on(dev);
>  
> -		if (printk_ratelimit())
> -			printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
> +		printk_ratelimited(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
> 				dev->name,
>  				speed_100 ? "100" : "10",
>  				duplex_full ? "full" : "half");
 
All these might be better using net_ratelimit and netdev_<level>

		if (net_ratelimit())
			netdev_info(dev, "link up, %uMbps, %s-duplex\n",
				    speed_100 ? 100 : 10,
				    duplex_full ? "full" : "half");

> @@ -549,8 +549,7 @@ static bool _sc92031_check_media(struct net_device *dev)
>  
>  		_sc92031_disable_tx_rx(dev);
>  
> -		if (printk_ratelimit())
> -			printk(KERN_INFO "%s: link down\n", dev->name);
> +		printk_ratelimited(KERN_INFO "%s: link down\n", dev->name);

etc...

netdev_<level>_ratelimited (and netdev_<level>_once)
could instead be added and used I suppose.

[PATCH 07/11] drivers/usb/atm: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/usb/atm/usbatm.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 989e16e..d3448ca 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -81,6 +81,7 @@
 #include <linux/timer.h>
 #include <linux/wait.h>
 #include <linux/kthread.h>
+#include <linux/ratelimit.h>
 
 #ifdef VERBOSE_DEBUG
 static int usbatm_print_packet(const unsigned char *data, int len);
@@ -668,8 +669,7 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 	/* racy disconnection check - fine */
 	if (!instance || instance->disconnected) {
 #ifdef DEBUG
-		if (printk_ratelimit())
-			printk(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
+		printk_ratelimited(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
 #endif
 		err = -ENODEV;
 		goto fail;
-- 
1.7.4.1

Re: [PATCH 07/11] drivers/usb/atm: use printk_ratelimited() instead of printk_ratelimit()

[Sergei Shtylyov]

Hello.

Manuel Zerpies wrote:

> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited()

> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
> ---
>  drivers/usb/atm/usbatm.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)

> diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
> index 989e16e..d3448ca 100644
> --- a/drivers/usb/atm/usbatm.c
> +++ b/drivers/usb/atm/usbatm.c
> @@ -81,6 +81,7 @@
>  #include <linux/timer.h>
>  #include <linux/wait.h>
>  #include <linux/kthread.h>
> +#include <linux/ratelimit.h>
>  
>  #ifdef VERBOSE_DEBUG
>  static int usbatm_print_packet(const unsigned char *data, int len);
> @@ -668,8 +669,7 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
>  	/* racy disconnection check - fine */
>  	if (!instance || instance->disconnected) {
>  #ifdef DEBUG
> -		if (printk_ratelimit())
> -			printk(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
> +		printk_ratelimited(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
>  #endif

    You could use pr_debug_ratelimited() and eliminate #ifdef with that.

WBR, Sergei

[PATCH 08/11] [SCSI] tcm_fc: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/target/tcm_fc/tfc_io.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index 4c3c0ef..b1d6911 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -39,6 +39,7 @@
 #include <linux/configfs.h>
 #include <linux/ctype.h>
 #include <linux/hash.h>
+#include <linux/ratelimit.h>
 #include <asm/unaligned.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
@@ -201,8 +202,7 @@ int ft_queue_data_in(struct se_cmd *se_cmd)
 		error = lport->tt.seq_send(lport, cmd->seq, fp);
 		if (error) {
 			/* XXX For now, initiator will retry */
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: Failed to send frame %p, "
+			printk_ratelimited(KERN_ERR "%s: Failed to send frame %p, "
 						"xid <0x%x>, remaining <0x%x>, "
 						"lso_max <0x%x>\n",
 						__func__, fp, ep->xid,
-- 
1.7.4.1

[PATCH 08/11] [SCSI] tcm_fc: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/target/tcm_fc/tfc_io.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index 4c3c0ef..b1d6911 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -39,6 +39,7 @@
 #include <linux/configfs.h>
 #include <linux/ctype.h>
 #include <linux/hash.h>
+#include <linux/ratelimit.h>
 #include <asm/unaligned.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
@@ -201,8 +202,7 @@ int ft_queue_data_in(struct se_cmd *se_cmd)
 		error = lport->tt.seq_send(lport, cmd->seq, fp);
 		if (error) {
 			/* XXX For now, initiator will retry */
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: Failed to send frame %p, "
+			printk_ratelimited(KERN_ERR "%s: Failed to send frame %p, "
 						"xid <0x%x>, remaining <0x%x>, "
 						"lso_max <0x%x>\n",
 						__func__, fp, ep->xid,
-- 
1.7.4.1

[PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/xen/xenbus/xenbus_xs.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 5534690..4055858 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -44,6 +44,7 @@
 #include <linux/rwsem.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/ratelimit.h>
 #include <xen/xenbus.h>
 #include "xenbus_comms.h"
 
@@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
 	}
 
 	if (msg.type != type) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING
+		`printk_ratelimited(KERN_WARNING
 			       "XENBUS unexpected type [%d], expected [%d]\n",
 			       msg.type, type);
 		kfree(ret);
-- 
1.7.4.1

[PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/xen/xenbus/xenbus_xs.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 5534690..4055858 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -44,6 +44,7 @@
 #include <linux/rwsem.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/ratelimit.h>
 #include <xen/xenbus.h>
 #include "xenbus_comms.h"
 
@@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
 	}
 
 	if (msg.type != type) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING
+		`printk_ratelimited(KERN_WARNING
 			       "XENBUS unexpected type [%d], expected [%d]\n",
 			       msg.type, type);
 		kfree(ret);
-- 
1.7.4.1

Re: [PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Jeremy Fitzhardinge]

On 06/16/2011 05:14 AM, Manuel Zerpies wrote:
> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited()
>
Looks OK to me, but please fix the indentation of the rest of the
statement to match.

Thanks,
    J

> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
> ---
>  drivers/xen/xenbus/xenbus_xs.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
> index 5534690..4055858 100644
> --- a/drivers/xen/xenbus/xenbus_xs.c
> +++ b/drivers/xen/xenbus/xenbus_xs.c
> @@ -44,6 +44,7 @@
>  #include <linux/rwsem.h>
>  #include <linux/module.h>
>  #include <linux/mutex.h>
> +#include <linux/ratelimit.h>
>  #include <xen/xenbus.h>
>  #include "xenbus_comms.h"
>  
> @@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
>  	}
>  
>  	if (msg.type != type) {
> -		if (printk_ratelimit())
> -			printk(KERN_WARNING
> +		`printk_ratelimited(KERN_WARNING
>  			       "XENBUS unexpected type [%d], expected [%d]\n",
>  			       msg.type, type);
>  		kfree(ret);

Re: [PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Jeremy Fitzhardinge]

On 06/16/2011 05:14 AM, Manuel Zerpies wrote:
> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited()
>
Looks OK to me, but please fix the indentation of the rest of the
statement to match.

Thanks,
    J

> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
> ---
>  drivers/xen/xenbus/xenbus_xs.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
> index 5534690..4055858 100644
> --- a/drivers/xen/xenbus/xenbus_xs.c
> +++ b/drivers/xen/xenbus/xenbus_xs.c
> @@ -44,6 +44,7 @@
>  #include <linux/rwsem.h>
>  #include <linux/module.h>
>  #include <linux/mutex.h>
> +#include <linux/ratelimit.h>
>  #include <xen/xenbus.h>
>  #include "xenbus_comms.h"
>  
> @@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
>  	}
>  
>  	if (msg.type != type) {
> -		if (printk_ratelimit())
> -			printk(KERN_WARNING
> +		`printk_ratelimited(KERN_WARNING
>  			       "XENBUS unexpected type [%d], expected [%d]\n",
>  			       msg.type, type);
>  		kfree(ret);

Re: [PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Joe Perches]

On Thu, 2011-06-16 at 14:00 -0700, Jeremy Fitzhardinge wrote:
> On 06/16/2011 05:14 AM, Manuel Zerpies wrote:
> > Since printk_ratelimit() shouldn't be used anymore (see comment in
> > include/linux/printk.h), replace it with printk_ratelimited()
> Looks OK to me, but please fix the indentation of the rest of the
> statement to match.
[]
> > diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
[]
> > @@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
> >  	}
> >  
> >  	if (msg.type != type) {
> > -		if (printk_ratelimit())
> > -			printk(KERN_WARNING
> > +		`printk_ratelimited(KERN_WARNING

Appears that it's not compile tested?
A stray "`" got put before printk_ratelimited()

Re: [PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Joe Perches]

On Thu, 2011-06-16 at 14:00 -0700, Jeremy Fitzhardinge wrote:
> On 06/16/2011 05:14 AM, Manuel Zerpies wrote:
> > Since printk_ratelimit() shouldn't be used anymore (see comment in
> > include/linux/printk.h), replace it with printk_ratelimited()
> Looks OK to me, but please fix the indentation of the rest of the
> statement to match.
[]
> > diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
[]
> > @@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
> >  	}
> >  
> >  	if (msg.type != type) {
> > -		if (printk_ratelimit())
> > -			printk(KERN_WARNING
> > +		`printk_ratelimited(KERN_WARNING

Appears that it's not compile tested?
A stray "`" got put before printk_ratelimited()

Re: [PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Joe Perches]

On Thu, 2011-06-16 at 14:00 -0700, Jeremy Fitzhardinge wrote:
> On 06/16/2011 05:14 AM, Manuel Zerpies wrote:
> > Since printk_ratelimit() shouldn't be used anymore (see comment in
> > include/linux/printk.h), replace it with printk_ratelimited()
> Looks OK to me, but please fix the indentation of the rest of the
> statement to match.
[]
> > diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
[]
> > @@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
> >  	}
> >  
> >  	if (msg.type != type) {
> > -		if (printk_ratelimit())
> > -			printk(KERN_WARNING
> > +		`printk_ratelimited(KERN_WARNING

Appears that it's not compile tested?
A stray "`" got put before printk_ratelimited()

[PATCH 09/11] xen/xenbus: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/xen/xenbus/xenbus_xs.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 5534690..4055858 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -44,6 +44,7 @@
 #include <linux/rwsem.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/ratelimit.h>
 #include <xen/xenbus.h>
 #include "xenbus_comms.h"
 
@@ -270,8 +271,7 @@ static void *xs_talkv(struct xenbus_transaction t,
 	}
 
 	if (msg.type != type) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING
+		`printk_ratelimited(KERN_WARNING
 			       "XENBUS unexpected type [%d], expected [%d]\n",
 			       msg.type, type);
 		kfree(ret);
-- 
1.7.4.1

[PATCH 10/11] wusb: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/usb/wusbcore/wa-xfer.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 6ccd93a..4193345 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -83,6 +83,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/hash.h>
+#include <linux/ratelimit.h>
 
 #include "wa-hc.h"
 #include "wusbhc.h"
@@ -1217,16 +1218,14 @@ static int wa_xfer_status_to_errno(u8 status)
 	if (status == 0)
 		return 0;
 	if (status >= ARRAY_SIZE(xlat)) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "%s(): BUG? "
+		printk_ratelimited(KERN_ERR "%s(): BUG? "
 			       "Unknown WA transfer status 0x%02x\n",
 			       __func__, real_status);
 		return -EINVAL;
 	}
 	errno = xlat[status];
 	if (unlikely(errno > 0)) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "%s(): BUG? "
+		printk_ratelimited(KERN_ERR "%s(): BUG? "
 			       "Inconsistent WA status: 0x%02x\n",
 			       __func__, real_status);
 		errno = -errno;
-- 
1.7.4.1

Re: [PATCH 10/11] wusb: use printk_ratelimited() instead of printk_ratelimit()

[Sergei Shtylyov]

Hello.

Manuel Zerpies wrote:

> Since printk_ratelimit() shouldn't be used anymore (see comment in
> include/linux/printk.h), replace it with printk_ratelimited()

> Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
> ---
>  drivers/usb/wusbcore/wa-xfer.c |    7 +++----
>  1 files changed, 3 insertions(+), 4 deletions(-)

> diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
> index 6ccd93a..4193345 100644
> --- a/drivers/usb/wusbcore/wa-xfer.c
> +++ b/drivers/usb/wusbcore/wa-xfer.c
> @@ -83,6 +83,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/slab.h>
>  #include <linux/hash.h>
> +#include <linux/ratelimit.h>
>  
>  #include "wa-hc.h"
>  #include "wusbhc.h"
> @@ -1217,16 +1218,14 @@ static int wa_xfer_status_to_errno(u8 status)
>  	if (status == 0)
>  		return 0;
>  	if (status >= ARRAY_SIZE(xlat)) {
> -		if (printk_ratelimit())
> -			printk(KERN_ERR "%s(): BUG? "
> +		printk_ratelimited(KERN_ERR "%s(): BUG? "
>  			       "Unknown WA transfer status 0x%02x\n",
>  			       __func__, real_status);
>  		return -EINVAL;
>  	}
>  	errno = xlat[status];
>  	if (unlikely(errno > 0)) {
> -		if (printk_ratelimit())
> -			printk(KERN_ERR "%s(): BUG? "
> +		printk_ratelimited(KERN_ERR "%s(): BUG? "
>  			       "Inconsistent WA status: 0x%02x\n",
>  			       __func__, real_status);
>  		errno = -errno;

    Why not pr_err_ratelimited()?

WBR, Sergei

[PATCH 11/11] usb/class: use printk_ratelimited() instead of printk_ratelimit()

[Manuel Zerpies]

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
---
 drivers/usb/class/usblp.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 9eca405..cb3a932 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -58,6 +58,7 @@
 #include <linux/mutex.h>
 #undef DEBUG
 #include <linux/usb.h>
+#include <linux/ratelimit.h>
 
 /*
  * Version Information
@@ -348,8 +349,7 @@ static int usblp_check_status(struct usblp *usblp, int err)
 	mutex_lock(&usblp->mut);
 	if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
 		mutex_unlock(&usblp->mut);
-		if (printk_ratelimit())
-			printk(KERN_ERR
+		printk_ratelimited(KERN_ERR
 				"usblp%d: error %d reading printer status\n",
 				usblp->minor, error);
 		return 0;
@@ -653,8 +653,7 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 		case LPGETSTATUS:
 			if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
-				if (printk_ratelimit())
-					printk(KERN_ERR "usblp%d:"
+				printk_ratelimited(KERN_ERR "usblp%d:"
 					    "failed reading printer status (%d)\n",
 					    usblp->minor, retval);
 				retval = -EIO;
-- 
1.7.4.1

Re: [PATCH 11/11] usb/class: use printk_ratelimited() instead of printk_ratelimit()

[Pete Zaitcev]

On Thu, 16 Jun 2011 14:15:54 +0200
Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de> wrote:

> +++ b/drivers/usb/class/usblp.c
> @@ -348,8 +349,7 @@ static int usblp_check_status(struct usblp *usblp, int err)
>  	mutex_lock(&usblp->mut);
>  	if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
>  		mutex_unlock(&usblp->mut);
> -		if (printk_ratelimit())
> -			printk(KERN_ERR
> +		printk_ratelimited(KERN_ERR
>  				"usblp%d: error %d reading printer status\n",

I wish you went a step further and placed the state into usblp,
but it works for now, ACK. I should've done it myself, really.

-- Pete