Re: [LTP] Ltp-list Digest, Vol 61, Issue 3

Re: [LTP] Ltp-list Digest, Vol 61, Issue 3

[hake huang]

Hi,

I am rebasing my local git repository with ltp May release from
git://ltp.git.sourceforge.net/gitroot/ltp/ltp, but I see no tag for
May release. which commit is the last one for May release?

Regards,

Hake

2011/6/9  <ltp-list-request@lists.sourceforge.net>:
> Send Ltp-list mailing list submissions to
>        ltp-list@lists.sourceforge.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://lists.sourceforge.net/lists/listinfo/ltp-list
> or, via email, send a message with subject or body 'help' to
>        ltp-list-request@lists.sourceforge.net
>
> You can reach the person managing the list at
>        ltp-list-owner@lists.sourceforge.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Ltp-list digest..."
>
>
> Today's Topics:
>
>   1. Re: open posix "sigpause" test defect (Cyril Hrubis)
>   2. Re: open posix "sigpause" test defect (Kevin R. Whitney)
>   3. [ANNOUNCE] The Linux Test Project has been released for MAY
>      2011. (Shubham Goyal)
>   4. [PATCH v2] cgroups/cpuacct_setup: fix task_kill() search for
>      process (Jan Stancek)
>   5. [PATCH] acl_test01: fix incorrect failure losetup.1 (Po-Yu Chuang)
>   6. [PATCH] gzip_tests.sh: fix error message typo (Po-Yu Chuang)
>   7. Re: [PATCH] acl_test01: fix incorrect failure losetup.1
>      (Garrett Cooper)
>   8. Re: [PATCH] gzip_tests.sh: fix error message typo (Garrett Cooper)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 3 Jun 2011 15:00:36 +0200
> From: Cyril Hrubis <chrubis@suse.cz>
> Subject: Re: [LTP] open posix "sigpause" test defect
> To: "Kevin R. Whitney" <krwhitney@gmail.com>
> Cc: ltp-list@lists.sourceforge.net
> Message-ID: <20110603130036.GA7155@saboteur.suse.cz>
> Content-Type: text/plain; charset=us-ascii
>
> Hi!
>> This is my first post, so if I'm in the wrong place, please direct me to the
>> correct place!
>>
>> I found that
>> test testcases/open_posix_testsuite/conformance/interfaces/sigpause/3-1.c is
>> unstable because of a defect in the code.  Of course I can provide the logic
>> and diffs, but where/who should I send it to?
>
> You got to the right place ;). Send a signed patch here.
>
> --
> Cyril Hrubis
> chrubis@suse.cz
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 4 Jun 2011 20:43:34 -0400
> From: "Kevin R. Whitney" <krwhitney@gmail.com>
> Subject: Re: [LTP] open posix "sigpause" test defect
> To: Cyril Hrubis <chrubis@suse.cz>
> Cc: ltp-list@lists.sourceforge.net
> Message-ID: <BANLkTi=MR+H7htd3XmqkHGGxoQvfBFRerQ@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I'm new- I don't know how to do that.  I'll look around the website, but if
> you have the
> info handy it'd be great if you could give me a pointer.
>
> Thanks,
>
> Kevin
>
>
> On Fri, Jun 3, 2011 at 9:00 AM, Cyril Hrubis <chrubis@suse.cz> wrote:
>
>> Hi!
>> > This is my first post, so if I'm in the wrong place, please direct me to
>> the
>> > correct place!
>> >
>> > I found that
>> > test testcases/open_posix_testsuite/conformance/interfaces/sigpause/3-1.c
>> is
>> > unstable because of a defect in the code.  Of course I can provide the
>> logic
>> > and diffs, but where/who should I send it to?
>>
>> You got to the right place ;). Send a signed patch here.
>>
>> --
>> Cyril Hrubis
>> chrubis@suse.cz
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 3
> Date: Mon, 06 Jun 2011 15:56:38 +0530
> From: Shubham Goyal <shubham@linux.vnet.ibm.com>
> Subject: [LTP] [ANNOUNCE] The Linux Test Project has been released for
>        MAY     2011.
> To: LTP list <ltp-list@lists.sourceforge.net>,
>        linux-kernel@vger.kernel.org
> Cc: vapier@gentoo.org, torvalds@linux-foundation.org,
>        akpm@linux-foundation.org
> Message-ID: <4DECAB5E.8030700@linux.vnet.ibm.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi,
>
> The Linux Test Project test suite has been released for the month of
> MAY 2011. Please see ltp/INSTALL file carefully, as there has been multiple
> changes for building/installing the test suite after the recent changes in
> Makefile infrastructure.
>
> The latest version of the test-suite contains 3000+ tests for the Linux
> OS and can be found at:
> http://ltp.sourceforge.net/,
> Latest happenings in LTP can also be found at:
> http://ltp.sourceforge.net/wiki/,
> http://ltp.sourceforge.net/wikiArchives.php, and,
> IRC: irc.freenode.org #ltp.
>
> Our web site also contains other information such as:
> - A Linux test tools matrix
> - Technical papers
> - How To's on Linux testing
> - Code coverage analysis tool.
>
> We would encourage the community to post results to
> ltp-results@lists.sf.net,
>
> patches, new tests, bugs or comments/questions to ltp-list@lists.sf.net,
>
> http://sourceforge.net/tracker/?func=add&group_id=3382&atid=103382  (for
> New Bug(s)),
> http://sourceforge.net/tracker/?func=add&group_id=3382&atid=303382  (for
> New Patch(s)),
> http://sourceforge.net/tracker/?func=add&group_id=3382&atid=353382  (for
> New Feature Request(s))
>
> **Note: Some pending patches will be checked in for next release.
>
> Happy testing,
> Regards,
> Shubham
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 07 Jun 2011 16:19:52 +0200
> From: Jan Stancek <jstancek@redhat.com>
> Subject: [LTP] [PATCH v2] cgroups/cpuacct_setup: fix task_kill()
>        search for      process
> To: ltp-list@lists.sourceforge.net
> Message-ID: <4DEE3388.5010307@redhat.com>
> Content-Type: text/plain; charset="utf-8"
>
>
> 1. "i* in "grep cpuacct_taski*" seems pointless as
> its target is cpuacct_task01
>
> 2. using cut fails when ps indents the output as following:
>   99 cpuacct_task01
>  112 cpuacct_task01
> 1111 cpuacct_task01
>
> Signed-off-by: Jan Stancek <jstancek@redhat.com>
> ---
>  .../kernel/controllers/cpuacct/cpuacct_setup.sh    |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 0001-cgroups-cpuacct_setup-fix-task_kill-search-for-proce.patch
> Type: text/x-patch
> Size: 470 bytes
> Desc: not available
>
> ------------------------------
>
> Message: 5
> Date: Thu,  9 Jun 2011 11:53:58 +0800
> From: Po-Yu Chuang <ratbert.chuang@gmail.com>
> Subject: [LTP] [PATCH] acl_test01: fix incorrect failure losetup.1
> To: ltp-list@lists.sourceforge.net
> Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
> Message-ID:
>        <1307591638-1662-1-git-send-email-ratbert.chuang@gmail.com>
>
> From: Po-Yu Chuang <ratbert@faraday-tech.com>
>
> The LOOP_DEV empty checking was incorrect.
>
> Use `command` for command substitution.
>
> Also move the assignment out of condition expression. Bash 3.2.9 and
> Busybox 1.17.3 ash do not seem to support this kind of usage.
>
> Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
> ---
>  testcases/kernel/fs/acls/acl_test01 |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/testcases/kernel/fs/acls/acl_test01 b/testcases/kernel/fs/acls/acl_test01
> index 7901002..7f883c6 100755
> --- a/testcases/kernel/fs/acls/acl_test01
> +++ b/testcases/kernel/fs/acls/acl_test01
> @@ -125,7 +125,8 @@ else
>
>        # Avoid hardcoded loopback device values (-f tries to find the first
>        # available loopback device name)!
> -       if ! (LOOP_DEV=$(losetup -f) && [ "x$LOOP_DEV" = x ]); then
> +       LOOP_DEV=`losetup -f`
> +       if [ "x$LOOP_DEV" = x ]; then
>                tst_resm TCONF "[ losetup.1 ] Failed to find an available loopback device -- is the required support compiled in your kernel?"
>                exit 0
>        fi
> --
> 1.6.3.3
>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Thu,  9 Jun 2011 11:56:24 +0800
> From: Po-Yu Chuang <ratbert.chuang@gmail.com>
> Subject: [LTP] [PATCH] gzip_tests.sh: fix error message typo
> To: ltp-list@lists.sourceforge.net
> Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
> Message-ID:
>        <1307591784-1735-1-git-send-email-ratbert.chuang@gmail.com>
>
> From: Po-Yu Chuang <ratbert@faraday-tech.com>
>
>
> Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
> ---
>  testcases/commands/gzip/gzip_tests.sh |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/testcases/commands/gzip/gzip_tests.sh b/testcases/commands/gzip/gzip_tests.sh
> index 99cafa4..5dba859 100755
> --- a/testcases/commands/gzip/gzip_tests.sh
> +++ b/testcases/commands/gzip/gzip_tests.sh
> @@ -265,7 +265,7 @@ test02()
>     if [ $RC -ne 0 ]
>        then
>                tst_brk TBROK $LTPTMP/tst_gzip.err NULL \
> -               "Test #2: uncompressing directory $LTPTMP/tst_gzip.tmp failed.  Reason"
> +               "Test #2: compressing directory $LTPTMP/tst_gzip.tmp failed.  Reason"
>                return $RC
>        fi
>
> --
> 1.6.3.3
>
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 8 Jun 2011 21:12:07 -0700
> From: Garrett Cooper <yanegomi@gmail.com>
> Subject: Re: [LTP] [PATCH] acl_test01: fix incorrect failure losetup.1
> To: Po-Yu Chuang <ratbert.chuang@gmail.com>
> Cc: ltp-list@lists.sourceforge.net, Po-Yu Chuang
>        <ratbert@faraday-tech.com>
> Message-ID: <CA7435E1-1588-4A21-A380-45D13479AC69@gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> On Jun 8, 2011, at 8:53 PM, Po-Yu Chuang wrote:
>
>> From: Po-Yu Chuang <ratbert@faraday-tech.com>
>>
>> The LOOP_DEV empty checking was incorrect.
>>
>> Use `command` for command substitution.
>>
>> Also move the assignment out of condition expression. Bash 3.2.9 and
>> Busybox 1.17.3 ash do not seem to support this kind of usage.
>
>        Yeah... looking back and knowing what I do now, that would never work because that's executed in a subshell.
> Thanks!
> -Garrett
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 8 Jun 2011 21:20:40 -0700
> From: Garrett Cooper <yanegomi@gmail.com>
> Subject: Re: [LTP] [PATCH] gzip_tests.sh: fix error message typo
> To: Po-Yu Chuang <ratbert.chuang@gmail.com>
> Cc: ltp-list@lists.sourceforge.net, Po-Yu Chuang
>        <ratbert@faraday-tech.com>
> Message-ID: <9507E9B4-F82A-4118-B4A4-D1D1DC466780@gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> On Jun 8, 2011, at 8:56 PM, Po-Yu Chuang wrote:
>
>> From: Po-Yu Chuang <ratbert@faraday-tech.com>
>>
>>
>> Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
>> ---
>> testcases/commands/gzip/gzip_tests.sh |    2 +-
>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/testcases/commands/gzip/gzip_tests.sh b/testcases/commands/gzip/gzip_tests.sh
>> index 99cafa4..5dba859 100755
>> --- a/testcases/commands/gzip/gzip_tests.sh
>> +++ b/testcases/commands/gzip/gzip_tests.sh
>> @@ -265,7 +265,7 @@ test02()
>>     if [ $RC -ne 0 ]
>>       then
>>               tst_brk TBROK $LTPTMP/tst_gzip.err NULL \
>> -             "Test #2: uncompressing directory $LTPTMP/tst_gzip.tmp failed.  Reason"
>> +             "Test #2: compressing directory $LTPTMP/tst_gzip.tmp failed.  Reason"
>>               return $RC
>
> Committed -- thanks :).
> -Garrett
>
>
>
>
> ------------------------------
>
> ------------------------------------------------------------------------------
> EditLive Enterprise is the world's most technically advanced content
> authoring tool. Experience the power of Track Changes, Inline Image
> Editing and ensure content is compliant with Accessibility Checking.
> http://p.sf.net/sfu/ephox-dev2dev
>
> ------------------------------
>
> _______________________________________________
> Ltp-list mailing list
> Ltp-list@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ltp-list
>
>
> End of Ltp-list Digest, Vol 61, Issue 3
> ***************************************
>

------------------------------------------------------------------------------
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list

Re: [LTP] Ltp-list Digest, Vol 61, Issue 3

[Shubham Goyal]

Hi Hake,

We are not tagging GIT currently for stable releases. But its a good 
idea to add tags for stable releases as some of the folks have suggested 
previously. I will definitely add a tag in next release. Below is the 
last commit taken for May release. You can use this for rebasing.

commit 7bc2bbcbf6d8fc329506dc3fcded152c7659dab9
Author: Caspar Zhang <czhang@redhat.com>
Date:   Mon May 30 22:46:56 2011 +0800

Thanks,
Shubham

> Hi,
>
> I am rebasing my local git repository with ltp May release from
> git://ltp.git.sourceforge.net/gitroot/ltp/ltp, but I see no tag for
> May release. which commit is the last one for May release?
>
> Regards,
>
> Hake


------------------------------------------------------------------------------
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list

Re: [LTP] Ltp-list Digest, Vol 61, Issue 3

[Cyril Hrubis]

Hi!
> I am rebasing my local git repository with ltp May release from
> git://ltp.git.sourceforge.net/gitroot/ltp/ltp, but I see no tag for
> May release. which commit is the last one for May release?

I've taken the liberty and tagged this release. Do we have a history of
release <-> last commit so I could tag older releases too?

And for the future we should add some kind of dummy commit with Release
XXXX commit message (The linux kernel usually changes VERSION or
EXTRAVERSION in Makefile). I could assist with that if you ask.

-- 
Cyril Hrubis
chrubis@suse.cz

------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a 
definitive record of customers, application performance, security 
threats, fraudulent activity and more. Splunk takes this data and makes 
sense of it. Business sense. IT sense. Common sense.. 
http://p.sf.net/sfu/splunk-d2d-c1
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list