Re: [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.

[Sergei Shtylyov <sshtylyov@mvista.com>]

Hello.

On 21-06-2011 11:03, p.paneri@samsung.com wrote:

> From: Praveen Paneri<p.paneri@samsung.com>

> Adding dwc driver name in existing platform device
> to probe DWC OTG driver.
> Introduced otg_set_platdata function to pass platform data
> Added selectable config option to add DWC OTG driver for different
> machines.

> Signed-off-by: Praveen Paneri<p.paneri@samsung.com>
[...]

> diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
> index 33a844a..7e6228b 100644
> --- a/arch/arm/plat-samsung/dev-usb-hsotg.c
> +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
[...]
> @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = {
>   static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
>
>   struct platform_device s3c_device_usb_hsotg = {
> +#ifdef CONFIG_S3C_DEV_USB_HSOTG
>   	.name		= "s3c-hsotg",
> +#endif
> +#ifdef CONFIG_S3C_DEV_DWC_OTG
> +	.name		= "dwc_otg",
> +#endif

    I'd done it as:

+#if defined(CONFIG_S3C_DEV_USB_HSOTG)
   	.name		= "s3c-hsotg",
+#elif defined(CONFIG_S3C_DEV_DWC_OTG)
+	.name		= "dwc_otg",
+#endif

WBR, Sergei