* minimal yocto images not booting on Beagleboard-xM rev B
@ 2011-07-06 14:00 G Rajender
2011-07-06 14:04 ` Gary Thomas
2011-07-06 16:42 ` Darren Hart
0 siblings, 2 replies; 7+ messages in thread
From: G Rajender @ 2011-07-06 14:00 UTC (permalink / raw)
To: yocto@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 1380 bytes --]
Hi,
I am new to Yocto project and Beagleboard.
I am using Beagleboard-xM rev B. I got the information about Yocto project by search. Yocto is a good open platform for Embedded developers for target specific architectures.
I have started working on Yocto project to build a LTP (Linux Test Project) Test frame work for Beagleboard-xM rev B. I have downloaded the Yocto release 1.0.1 and Beagleboard-xM BSP from the Yocto website. I have installed the Yocto project poky build tool and demo image in my Host PC (Ubuntu 10.04)as per poky quick start guide.
Now I am trying to execute the meta-bsp (meta-beagleboard) binaries (built images) on beagleboard-xM rev B as per README. Hardware file. But the beagleboard-xM revision B is not booting with theses BSP images.
Also I want add the Beagleboard BSP to the BBlayers of poky. I am unable to understand the procedure explained in BSP developer's guide.
Can anyone suggest or share the experiences about above problems.
Thanks in advance and looking for your kind response.
Thanks and regards,
Rajender.G
Larsen & Toubro Limited
www.larsentoubro.com
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
[-- Attachment #2: Type: text/html, Size: 2940 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: minimal yocto images not booting on Beagleboard-xM rev B
2011-07-06 14:00 minimal yocto images not booting on Beagleboard-xM rev B G Rajender
@ 2011-07-06 14:04 ` Gary Thomas
2011-07-07 5:37 ` G Rajender
2011-07-06 16:42 ` Darren Hart
1 sibling, 1 reply; 7+ messages in thread
From: Gary Thomas @ 2011-07-06 14:04 UTC (permalink / raw)
To: G Rajender; +Cc: yocto@yoctoproject.org
On 07/06/2011 08:00 AM, G Rajender wrote:
> Hi,
>
> I am new to Yocto project and Beagleboard.
>
> I am using Beagleboard-xM rev B. I got the information about Yocto project by search. Yocto is a good open platform for Embedded developers for target specific architectures.
>
> I have started working on Yocto project to build a LTP (Linux Test Project) Test frame work for Beagleboard-xM rev B. I have downloaded the Yocto release 1.0.1 and Beagleboard-xM
> BSP from the Yocto website. I have installed the Yocto project poky build tool and demo image in my Host PC (Ubuntu 10.04)as per poky quick start guide.
>
> *Now I am trying to execute the meta-bsp (meta-beagleboard) binaries (built images) on beagleboard-xM rev B as per README. Hardware file. But the beagleboard-xM revision B is not
> booting with theses BSP images.*
What does "not booting" mean? What errors are you getting?
>
> **
>
> *Also I want add the Beagleboard BSP to the BBlayers of poky. I am unable to understand the procedure explained in BSP developer’s guide.*
>
> *Can anyone suggest or share the experiences about above problems.*
>
> Thanks in advance and looking for your kind response.
>
> Thanks and regards,
>
> Rajender.G
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: minimal yocto images not booting on Beagleboard-xM rev B
2011-07-06 14:00 minimal yocto images not booting on Beagleboard-xM rev B G Rajender
2011-07-06 14:04 ` Gary Thomas
@ 2011-07-06 16:42 ` Darren Hart
2011-07-07 5:26 ` G Rajender
2011-07-11 10:32 ` Koen Kooi
1 sibling, 2 replies; 7+ messages in thread
From: Darren Hart @ 2011-07-06 16:42 UTC (permalink / raw)
To: G Rajender; +Cc: yocto@yoctoproject.org
On 07/06/2011 07:00 AM, G Rajender wrote:
> Hi,
>
>
>
> I am new to Yocto project and Beagleboard.
>
>
>
> I am using Beagleboard-xM rev B. I got the information about Yocto
> project by search. Yocto is a good open platform for Embedded developers
> for target specific architectures.
>
>
>
> I have started working on Yocto project to build a LTP (Linux Test
> Project) Test frame work for Beagleboard-xM rev B. I have downloaded the
> Yocto release 1.0.1 and Beagleboard-xM BSP from the Yocto website. I
> have installed the Yocto project poky build tool and demo image in my
> Host PC (Ubuntu 10.04)as per poky quick start guide.
>
>
>
> *Now I am trying to execute the meta-bsp (meta-beagleboard) binaries
> (built images) on beagleboard-xM rev B as per README. Hardware file. But
> the beagleboard-xM revision B is not booting with theses BSP images.*
Hi Rajender,
Welcome to the Yocto Project.
We just recently completed a major overhaul to the meta-yocto
beagleboard BSP, bringing it closer in line with the
meta-texasinstruments BSP. I have tested on a C4 and an xM Rev A. I have
reports of it working on rev B and not working on rev C, which we are
looking into.
For the best Yocto beagleboard support, I suggest building from the git
repository until the 1.1 release later this year.
--
Darren
>
> * *
>
> *Also I want add the Beagleboard BSP to the BBlayers of poky. I am
> unable to understand the procedure explained in BSP developer’s guide.*
>
>
>
> *Can anyone suggest or share the experiences about above problems.*
>
>
>
> Thanks in advance and looking for your kind response.
>
>
>
>
>
> Thanks and regards,
>
>
>
> Rajender.G
>
>
>
>
>
>
>
>
>
>
>
>
>
> *Larsen & Toubro Limited
>
> www.larsentoubro.com
>
> *This Email may contain confidential or privileged information for the
> intended recipient (s) If you are not the intended recipient, please do
> not use or disseminate the information, notify the sender and delete it
> from your system.
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: minimal yocto images not booting on Beagleboard-xM rev B
2011-07-06 16:42 ` Darren Hart
@ 2011-07-07 5:26 ` G Rajender
2011-07-11 16:25 ` Darren Hart
2011-07-11 10:32 ` Koen Kooi
1 sibling, 1 reply; 7+ messages in thread
From: G Rajender @ 2011-07-07 5:26 UTC (permalink / raw)
To: Darren Hart; +Cc: yocto@yoctoproject.org
Hi Darren,
Thank you very much for your reply.
now i am confident that meta-beagleboard BSP images will work on Beagleboard-xM rev B.
Can you please suggest the steps to follow on how to build from the git repository and execute on Beagleboard-xM rev B.
Thank you much for your valuable time spending on this. Looking for your kind response.
Thanks and regards,
Rajender.G
________________________________________
From: Darren Hart [dvhart@linux.intel.com]
Sent: Wednesday, July 06, 2011 10:12 PM
To: G Rajender
Cc: yocto@yoctoproject.org
Subject: Re: [yocto] minimal yocto images not booting on Beagleboard-xM rev B
On 07/06/2011 07:00 AM, G Rajender wrote:
> Hi,
>
>
>
> I am new to Yocto project and Beagleboard.
>
>
>
> I am using Beagleboard-xM rev B. I got the information about Yocto
> project by search. Yocto is a good open platform for Embedded developers
> for target specific architectures.
>
>
>
> I have started working on Yocto project to build a LTP (Linux Test
> Project) Test frame work for Beagleboard-xM rev B. I have downloaded the
> Yocto release 1.0.1 and Beagleboard-xM BSP from the Yocto website. I
> have installed the Yocto project poky build tool and demo image in my
> Host PC (Ubuntu 10.04)as per poky quick start guide.
>
>
>
> *Now I am trying to execute the meta-bsp (meta-beagleboard) binaries
> (built images) on beagleboard-xM rev B as per README. Hardware file. But
> the beagleboard-xM revision B is not booting with theses BSP images.*
Hi Rajender,
Welcome to the Yocto Project.
We just recently completed a major overhaul to the meta-yocto
beagleboard BSP, bringing it closer in line with the
meta-texasinstruments BSP. I have tested on a C4 and an xM Rev A. I have
reports of it working on rev B and not working on rev C, which we are
looking into.
For the best Yocto beagleboard support, I suggest building from the git
repository until the 1.1 release later this year.
--
Darren
>
> * *
>
> *Also I want add the Beagleboard BSP to the BBlayers of poky. I am
> unable to understand the procedure explained in BSP developer’s guide.*
>
>
>
> *Can anyone suggest or share the experiences about above problems.*
>
>
>
> Thanks in advance and looking for your kind response.
>
>
>
>
>
> Thanks and regards,
>
>
>
> Rajender.G
>
>
>
>
>
>
>
>
>
>
>
>
>
> *Larsen & Toubro Limited
>
> www.larsentoubro.com
>
> *This Email may contain confidential or privileged information for the
> intended recipient (s) If you are not the intended recipient, please do
> not use or disseminate the information, notify the sender and delete it
> from your system.
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
Larsen & Toubro Limited
www.larsentoubro.com
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: minimal yocto images not booting on Beagleboard-xM rev B
2011-07-06 14:04 ` Gary Thomas
@ 2011-07-07 5:37 ` G Rajender
0 siblings, 0 replies; 7+ messages in thread
From: G Rajender @ 2011-07-07 5:37 UTC (permalink / raw)
To: Gary Thomas; +Cc: yocto@yoctoproject.org
Hi Gary,
Thank you very much for your reply.
I have followed the steps given in README.hardware. I have copied all the required images to SD card, inserted in to SD/MMC slot of Beagleboard-xM rev B, connected the serial cable to minicom on Host PC (Ubuntu 10.04) and given power to the board. But on minicom i am not getting any bootup messages and echos etc...
Can you please suggest the steps to follow on how to execute meta-beagleboard BSP pre-built binaries on Beagleboard-xM rev B.
Thank you much for your valuable time spending on this. Looking for your kind response.
Thanks and regards,
Rajender.G
________________________________________
From: Gary Thomas [gary@mlbassoc.com]
Sent: Wednesday, July 06, 2011 7:34 PM
To: G Rajender
Cc: yocto@yoctoproject.org
Subject: Re: [yocto] minimal yocto images not booting on Beagleboard-xM rev B
On 07/06/2011 08:00 AM, G Rajender wrote:
> Hi,
>
> I am new to Yocto project and Beagleboard.
>
> I am using Beagleboard-xM rev B. I got the information about Yocto project by search. Yocto is a good open platform for Embedded developers for target specific architectures.
>
> I have started working on Yocto project to build a LTP (Linux Test Project) Test frame work for Beagleboard-xM rev B. I have downloaded the Yocto release 1.0.1 and Beagleboard-xM
> BSP from the Yocto website. I have installed the Yocto project poky build tool and demo image in my Host PC (Ubuntu 10.04)as per poky quick start guide.
>
> *Now I am trying to execute the meta-bsp (meta-beagleboard) binaries (built images) on beagleboard-xM rev B as per README. Hardware file. But the beagleboard-xM revision B is not
> booting with theses BSP images.*
What does "not booting" mean? What errors are you getting?
>
> **
>
> *Also I want add the Beagleboard BSP to the BBlayers of poky. I am unable to understand the procedure explained in BSP developer’s guide.*
>
> *Can anyone suggest or share the experiences about above problems.*
>
> Thanks in advance and looking for your kind response.
>
> Thanks and regards,
>
> Rajender.G
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
Larsen & Toubro Limited
www.larsentoubro.com
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: minimal yocto images not booting on Beagleboard-xM rev B
2011-07-06 16:42 ` Darren Hart
2011-07-07 5:26 ` G Rajender
@ 2011-07-11 10:32 ` Koen Kooi
1 sibling, 0 replies; 7+ messages in thread
From: Koen Kooi @ 2011-07-11 10:32 UTC (permalink / raw)
To: Darren Hart; +Cc: yocto@yoctoproject.org, G Rajender
Op 6 jul 2011, om 18:42 heeft Darren Hart het volgende geschreven:
>
>
> On 07/06/2011 07:00 AM, G Rajender wrote:
>> Hi,
>>
>>
>>
>> I am new to Yocto project and Beagleboard.
>>
>>
>>
>> I am using Beagleboard-xM rev B. I got the information about Yocto
>> project by search. Yocto is a good open platform for Embedded developers
>> for target specific architectures.
>>
>>
>>
>> I have started working on Yocto project to build a LTP (Linux Test
>> Project) Test frame work for Beagleboard-xM rev B. I have downloaded the
>> Yocto release 1.0.1 and Beagleboard-xM BSP from the Yocto website. I
>> have installed the Yocto project poky build tool and demo image in my
>> Host PC (Ubuntu 10.04)as per poky quick start guide.
>>
>>
>>
>> *Now I am trying to execute the meta-bsp (meta-beagleboard) binaries
>> (built images) on beagleboard-xM rev B as per README. Hardware file. But
>> the beagleboard-xM revision B is not booting with theses BSP images.*
>
> Hi Rajender,
>
> Welcome to the Yocto Project.
>
> We just recently completed a major overhaul to the meta-yocto
> beagleboard BSP, bringing it closer in line with the
> meta-texasinstruments BSP. I have tested on a C4 and an xM Rev A. I have
> reports of it working on rev B and not working on rev C, which we are
> looking into.
>
> For the best Yocto beagleboard support, I suggest building from the git
> repository until the 1.1 release later this year.
Well, for the best beagleboard support you'd still need the offcial beagleboard layer (http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-texasinstruments/) and use angstrom as distro
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: minimal yocto images not booting on Beagleboard-xM rev B
2011-07-07 5:26 ` G Rajender
@ 2011-07-11 16:25 ` Darren Hart
0 siblings, 0 replies; 7+ messages in thread
From: Darren Hart @ 2011-07-11 16:25 UTC (permalink / raw)
To: G Rajender; +Cc: yocto@yoctoproject.org
On 07/06/2011 10:26 PM, G Rajender wrote:
> Hi Darren,
>
> Thank you very much for your reply.
> now i am confident that meta-beagleboard BSP images will work on Beagleboard-xM rev B.
> Can you please suggest the steps to follow on how to build from the git repository and execute on Beagleboard-xM rev B.
> Thank you much for your valuable time spending on this. Looking for your kind response.
>
> Thanks and regards,
The process is the same as it is for building from a release tarball,
the only difference is how you get the source. Rather than unpacking the
release tarball, just use git to clone the repository:
$ git clone git://git.yoctoproject.org/poky.git
Then cd into the new poky directory and follow the quick start guide.
--
Darren
>
> Rajender.G
>
>
> ________________________________________
> From: Darren Hart [dvhart@linux.intel.com]
> Sent: Wednesday, July 06, 2011 10:12 PM
> To: G Rajender
> Cc: yocto@yoctoproject.org
> Subject: Re: [yocto] minimal yocto images not booting on Beagleboard-xM rev B
>
> On 07/06/2011 07:00 AM, G Rajender wrote:
>> Hi,
>>
>>
>>
>> I am new to Yocto project and Beagleboard.
>>
>>
>>
>> I am using Beagleboard-xM rev B. I got the information about Yocto
>> project by search. Yocto is a good open platform for Embedded developers
>> for target specific architectures.
>>
>>
>>
>> I have started working on Yocto project to build a LTP (Linux Test
>> Project) Test frame work for Beagleboard-xM rev B. I have downloaded the
>> Yocto release 1.0.1 and Beagleboard-xM BSP from the Yocto website. I
>> have installed the Yocto project poky build tool and demo image in my
>> Host PC (Ubuntu 10.04)as per poky quick start guide.
>>
>>
>>
>> *Now I am trying to execute the meta-bsp (meta-beagleboard) binaries
>> (built images) on beagleboard-xM rev B as per README. Hardware file. But
>> the beagleboard-xM revision B is not booting with theses BSP images.*
>
> Hi Rajender,
>
> Welcome to the Yocto Project.
>
> We just recently completed a major overhaul to the meta-yocto
> beagleboard BSP, bringing it closer in line with the
> meta-texasinstruments BSP. I have tested on a C4 and an xM Rev A. I have
> reports of it working on rev B and not working on rev C, which we are
> looking into.
>
> For the best Yocto beagleboard support, I suggest building from the git
> repository until the 1.1 release later this year.
>
> --
> Darren
>
>>
>> * *
>>
>> *Also I want add the Beagleboard BSP to the BBlayers of poky. I am
>> unable to understand the procedure explained in BSP developer’s guide.*
>>
>>
>>
>> *Can anyone suggest or share the experiences about above problems.*
>>
>>
>>
>> Thanks in advance and looking for your kind response.
>>
>>
>>
>>
>>
>> Thanks and regards,
>>
>>
>>
>> Rajender.G
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> *Larsen & Toubro Limited
>>
>> www.larsentoubro.com
>>
>> *This Email may contain confidential or privileged information for the
>> intended recipient (s) If you are not the intended recipient, please do
>> not use or disseminate the information, notify the sender and delete it
>> from your system.
>>
>>
>>
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
> --
> Darren Hart
> Intel Open Source Technology Center
> Yocto Project - Linux Kernel
>
>
> Larsen & Toubro Limited
>
> www.larsentoubro.com
>
> This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-07-11 16:25 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-06 14:00 minimal yocto images not booting on Beagleboard-xM rev B G Rajender
2011-07-06 14:04 ` Gary Thomas
2011-07-07 5:37 ` G Rajender
2011-07-06 16:42 ` Darren Hart
2011-07-07 5:26 ` G Rajender
2011-07-11 16:25 ` Darren Hart
2011-07-11 10:32 ` Koen Kooi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.