* [Ocfs2-devel] mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on /etc/xen/vm/. Check 'dmesg' for more information on this error.
@ 2011-07-14 7:47 r.giordani at libero.it
2011-07-14 9:04 ` Tao Ma
0 siblings, 1 reply; 3+ messages in thread
From: r.giordani at libero.it @ 2011-07-14 7:47 UTC (permalink / raw)
To: ocfs2-devel
Hello,
this is my scenario:
1)I've created a Pacemaker cluster with the following ocfs package on opensuse
11.3 64bit
ocfs2console-1.8.0-2.1.x86_64
ocfs2-tools-o2cb-1.8.0-2.1.x86_64
ocfs2-tools-1.8.0-2.1.x86_64
2)I've configured the cluster as usual :
<resources>
<clone id="dlm-clone">
<meta_attributes id="dlm-clone-meta_attributes">
<nvpair id="dlm-clone-meta_attributes-interleave" name="interleave"
value="true"/>
</meta_attributes>
<primitive class="ocf" id="dlm" provider="pacemaker" type="controld">
<operations>
<op id="dlm-monitor-120s" interval="120s" name="monitor"/>
</operations>
</primitive>
</clone>
<clone id="o2cb-clone">
<meta_attributes id="o2cb-clone-meta_attributes">
<nvpair id="o2cb-clone-meta_attributes-interleave" name="interleave"
value="true"/>
</meta_attributes>
<primitive class="ocf" id="o2cb" provider="ocfs2" type="o2cb">
<operations>
<op id="o2cb-monitor-120s" interval="120s" name="monitor"/>
</operations>
</primitive>
</clone>
<clone id="XenConfigClone">
<primitive class="ocf" id="XenConfig" provider="heartbeat" type="
Filesystem">
<meta_attributes id="XenConfig-meta_attributes">
<nvpair id="XenConfig-meta_attributes-is-managed" name="is-
managed" value="true"/>
<nvpair id="XenConfig-meta_attributes-target-role" name="target-
role" value="Started"/>
</meta_attributes>
<operations id="XenConfig-operations">
<op id="XenConfig-op-monitor-120" interval="120" name="monitor"/>
</operations>
<instance_attributes id="XenConfig-instance_attributes">
<nvpair id="XenConfig-instance_attributes-device" name="device"
value="/dev/mapper/xenconfig_part1"/>
<nvpair id="XenConfig-instance_attributes-directory" name="
directory" value="/etc/xen/vm"/>
<nvpair id="XenConfig-instance_attributes-fstype" name="fstype"
value="ocfs2"/>
</instance_attributes>
</primitive>
<meta_attributes id="XenConfigClone-meta_attributes">
<nvpair id="XenConfigClone-meta_attributes-target-role" name="target-
role" value="Started"/>
<nvpair id="XenConfigClone-meta_attributes-interleave" name="
interleave" value="true"/>
<nvpair id="XenConfigClone-meta_attributes-ordered" name="ordered"
value="true"/>
</meta_attributes>
</clone>
<clone id="XenImagesClone">
<primitive class="ocf" id="XenImages" provider="heartbeat" type="
Filesystem">
<meta_attributes id="XenImages-meta_attributes">
<nvpair id="XenImages-meta_attributes-is-managed" name="is-
managed" value="true"/>
</meta_attributes>
<operations id="XenImages-operations">
<op id="XenImages-op-monitor-120" interval="120" name="monitor"/>
</operations>
<instance_attributes id="XenImages-instance_attributes">
<nvpair id="XenImages-instance_attributes-device" name="device"
value="/dev/mapper/xenimages_part1"/>
<nvpair id="XenImages-instance_attributes-directory" name="
directory" value="/var/lib/xen/images"/>
<nvpair id="XenImages-instance_attributes-fstype" name="fstype"
value="ocfs2"/>
</instance_attributes>
</primitive>
<meta_attributes id="XenImagesClone-meta_attributes">
<nvpair id="XenImagesClone-meta_attributes-target-role" name="target-
role" value="Started"/>
<nvpair id="XenImagesClone-meta_attributes-interleave" name="
interleave" value="true"/>
<nvpair id="XenImagesClone-meta_attributes-ordered" name="ordered"
value="true"/>
</meta_attributes>
</clone>
</resources>
And all the resource are up and running
3)Then, using my SAN, I've configured multipath as following:
xenconfig (3600a0b8000754c84000002a04e031e5a) dm-0 IBM,1726-4xx FAStT
size=19G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
|-+- policy='round-robin 0' prio=3 status=active
| |- 3:0:1:0 sdd 8:48 active ready running
| `- 4:0:1:0 sdh 8:112 active ready running
`-+- policy='round-robin 0' prio=0 status=enabled
|- 3:0:0:0 sdb 8:16 active ghost running
`- 4:0:0:0 sdf 8:80 active ghost running
xenimages (3600a0b8000754ce3000003024e031dbf) dm-1 IBM,1726-4xx FAStT
size=400G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
|-+- policy='round-robin 0' prio=3 status=active
| |- 3:0:0:1 sdc 8:32 active ready running
| `- 4:0:0:1 sdg 8:96 active ready running
`-+- policy='round-robin 0' prio=0 status=enabled
|- 3:0:1:1 sde 8:64 active ghost running
`- 4:0:1:1 sdi 8:128 active ghost running
4)Then I've create the first partition on /dev/mapper/xenconfig.
5)format the partition as ocfs2
mkfs.ocfs2 -F /dev/mapper/xenconfig_part1
mkfs.ocfs2 1.8.0
Cluster stack: pcmk
Cluster name: pacemaker
Stack Flags: 0x0
NOTE: Feature extended slot map may be enabled
Label:
Features: sparse extended-slotmap backup-super unwritten inline-data strict-
journal-super xattr indexed-dirs refcount discontig-bg
Block size: 4096 (12 bits)
Cluster size: 4096 (12 bits)
Volume size: 20063436800 (4898300 clusters) (4898300 blocks)
Cluster groups: 152 (tail covers 27644 clusters, rest cover 32256 clusters)
Extent allocator size: 4194304 (1 groups)
Journal size: 125394944
Node slots: 8
Creating bitmaps: done
Initializing superblock: done
Writing system files: done
Writing superblock: done
Writing backup superblock: 3 block(s)
Formatting Journals: done
Growing extent allocator: done
Formatting slot map: done
Formatting quota files: done
Writing lost+found: done
mkfs.ocfs2 successful
6)this is the /etc/sysconfig/o2cb file
#
# This is a configuration file for automatic startup of the O2CB
# driver. It is generated by running /etc/init.d/o2cb configure.
# On Debian based systems the preferred method is running
# 'dpkg-reconfigure ocfs2-tools'.
#
# O2CB_ENABLED: 'true' means to load the driver on boot.
O2CB_ENABLED=true
# O2CB_STACK: The name of the cluster stack backing O2CB.
O2CB_STACK=pcmk
# O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start.
O2CB_BOOTCLUSTER=pacemaker
# O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
O2CB_HEARTBEAT_THRESHOLD=
# O2CB_IDLE_TIMEOUT_MS: Time in ms before a network connection is considered
dead.
O2CB_IDLE_TIMEOUT_MS=
# O2CB_KEEPALIVE_DELAY_MS: Max time in ms before a keepalive packet is sent
O2CB_KEEPALIVE_DELAY_MS=
# O2CB_RECONNECT_DELAY_MS: Min time in ms between connection attempts
O2CB_RECONNECT_DELAY_MS=
7)nodo5:~ # mount /dev/mapper/xenconfig_part1 /etc/xen/vm/
mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on
/etc/xen/vm/. Check 'dmesg' for more information on this error.
and this is the log messages
Jul 14 09:28:36 nodo5 ocfs2_controld: new client connection 5
Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
Jul 14 09:28:36 nodo5 ocfs2_controld: client message 0 from 5: MOUNT
Jul 14 09:28:36 nodo5 ocfs2_controld: start_mount: uuid
"5E40DA55CC534CB7AF9A2D402C9BCCF0", device "/dev/mapper/xenconfig_part1",
service "ocfs2"
Jul 14 09:28:36 nodo5 ocfs2_controld: Adding service "ocfs2" to device
"/dev/mapper/xenconfig_part1" uuid "5E40DA55CC534CB7AF9A2D402C9BCCF0"
Jul 14 09:28:36 nodo5 ocfs2_controld: Starting join for group "ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0"
Jul 14 09:28:36 nodo5 ocfs2_controld: cpg_join succeeded
Jul 14 09:28:36 nodo5 ocfs2_controld: start_mount returns 0
Jul 14 09:28:36 nodo5 ocfs2_controld: confchg called
Jul 14 09:28:36 nodo5 ocfs2_controld: group "ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0" confchg: members 1, left 0, joined 1
Jul 14 09:28:36 nodo5 ocfs2_controld: Node 1761913024 joins group ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0
Jul 14 09:28:36 nodo5 ocfs2_controld: This node joins group ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0
Jul 14 09:28:36 nodo5 ocfs2_controld: Filling node 1761913024 to group ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0
Jul 14 09:28:36 nodo5 ocfs2_controld: Registering mountgroup
5E40DA55CC534CB7AF9A2D402C9BCCF0 with dlm_controld
Jul 14 09:28:36 nodo5 ocfs2_controld: Registering
"5E40DA55CC534CB7AF9A2D402C9BCCF0" with dlm_controld
Jul 14 09:28:36 nodo5 ocfs2_controld: message from dlmcontrol
Jul 14 09:28:36 nodo5 ocfs2_controld: Registration of
"5E40DA55CC534CB7AF9A2D402C9BCCF0" complete
Jul 14 09:28:36 nodo5 ocfs2_controld: Mountgroup
5E40DA55CC534CB7AF9A2D402C9BCCF0 successfully registered with dlm_controld
Jul 14 09:28:36 nodo5 ocfs2_controld: notify_mount_client sending 0 "OK"
Jul 14 09:28:36 nodo5 ocfs2_controld: Notified client: 1
Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
Jul 14 09:28:36 nodo5 ocfs2_controld: client message 1 from 5: MRESULT
Jul 14 09:28:36 nodo5 ocfs2_controld: complete_mount: uuid
"5E40DA55CC534CB7AF9A2D402C9BCCF0", errcode "22", service "ocfs2"
Jul 14 09:28:36 nodo5 ocfs2_controld: Unregistering mountgroup
5E40DA55CC534CB7AF9A2D402C9BCCF0
Jul 14 09:28:36 nodo5 ocfs2_controld: Unregistering
"5E40DA55CC534CB7AF9A2D402C9BCCF0" from dlm_controld
Jul 14 09:28:36 nodo5 ocfs2_controld: time to leave group
5E40DA55CC534CB7AF9A2D402C9BCCF0
Jul 14 09:28:36 nodo5 ocfs2_controld: calling LEAVE for group
5E40DA55CC534CB7AF9A2D402C9BCCF0
Jul 14 09:28:36 nodo5 ocfs2_controld: leaving group "ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0"
Jul 14 09:28:36 nodo5 ocfs2_controld: cpg_leave succeeded
Jul 14 09:28:36 nodo5 ocfs2_controld: confchg called
Jul 14 09:28:36 nodo5 ocfs2_controld: group "ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0" confchg: members 0, left 1, joined 0
Jul 14 09:28:36 nodo5 ocfs2_controld: Node 1761913024 leaves group ocfs2:
5E40DA55CC534CB7AF9A2D402C9BCCF0
Jul 14 09:28:36 nodo5 ocfs2_controld: notify_mount_client sending 0 "OK"
Jul 14 09:28:36 nodo5 ocfs2_controld: Notified client: 1
Jul 14 09:28:36 nodo5 ocfs2_controld: client 6 fd 15 dead
Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
Jul 14 09:28:36 nodo5 ocfs2_controld: client 5 fd 14 dead
Jul 14 09:28:36 nodo5 ocfs2_controld: client 5 fd -1 dead
Jul 14 09:28:36 nodo5 kernel: [52007.749756] (mount.ocfs2,7720,4):
ocfs2_initialize_super:2119 ERROR: couldn't mount because of unsupported
optional features (2000).
Jul 14 09:28:36 nodo5 kernel: [52007.749761] (mount.ocfs2,7720,4):
ocfs2_fill_super:1021 ERROR: status = -22
Jul 14 09:28:36 nodo5 kernel: [52007.749770] ocfs2: Unmounting device (253,2)
on (node 0)
Could someone explain why?
I've made the same thing with ocfs2-1.4 and all works fine
Regards,
Roberto.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Ocfs2-devel] mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on /etc/xen/vm/. Check 'dmesg' for more information on this error.
2011-07-14 7:47 [Ocfs2-devel] mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on /etc/xen/vm/. Check 'dmesg' for more information on this error r.giordani at libero.it
@ 2011-07-14 9:04 ` Tao Ma
2011-07-14 14:40 ` Sunil Mushran
0 siblings, 1 reply; 3+ messages in thread
From: Tao Ma @ 2011-07-14 9:04 UTC (permalink / raw)
To: ocfs2-devel
On 07/14/2011 03:47 PM, r.giordani at libero.it wrote:
> Hello,
> this is my scenario:
> 1)I've created a Pacemaker cluster with the following ocfs package on opensuse
> 11.3 64bit
> ocfs2console-1.8.0-2.1.x86_64
> ocfs2-tools-o2cb-1.8.0-2.1.x86_64
> ocfs2-tools-1.8.0-2.1.x86_64
>
> 2)I've configured the cluster as usual :
> <resources>
> <clone id="dlm-clone">
> <meta_attributes id="dlm-clone-meta_attributes">
> <nvpair id="dlm-clone-meta_attributes-interleave" name="interleave"
> value="true"/>
> </meta_attributes>
> <primitive class="ocf" id="dlm" provider="pacemaker" type="controld">
> <operations>
> <op id="dlm-monitor-120s" interval="120s" name="monitor"/>
> </operations>
> </primitive>
> </clone>
> <clone id="o2cb-clone">
> <meta_attributes id="o2cb-clone-meta_attributes">
> <nvpair id="o2cb-clone-meta_attributes-interleave" name="interleave"
> value="true"/>
> </meta_attributes>
> <primitive class="ocf" id="o2cb" provider="ocfs2" type="o2cb">
> <operations>
> <op id="o2cb-monitor-120s" interval="120s" name="monitor"/>
> </operations>
> </primitive>
> </clone>
> <clone id="XenConfigClone">
> <primitive class="ocf" id="XenConfig" provider="heartbeat" type="
> Filesystem">
> <meta_attributes id="XenConfig-meta_attributes">
> <nvpair id="XenConfig-meta_attributes-is-managed" name="is-
> managed" value="true"/>
> <nvpair id="XenConfig-meta_attributes-target-role" name="target-
> role" value="Started"/>
> </meta_attributes>
> <operations id="XenConfig-operations">
> <op id="XenConfig-op-monitor-120" interval="120" name="monitor"/>
> </operations>
> <instance_attributes id="XenConfig-instance_attributes">
> <nvpair id="XenConfig-instance_attributes-device" name="device"
> value="/dev/mapper/xenconfig_part1"/>
> <nvpair id="XenConfig-instance_attributes-directory" name="
> directory" value="/etc/xen/vm"/>
> <nvpair id="XenConfig-instance_attributes-fstype" name="fstype"
> value="ocfs2"/>
> </instance_attributes>
> </primitive>
> <meta_attributes id="XenConfigClone-meta_attributes">
> <nvpair id="XenConfigClone-meta_attributes-target-role" name="target-
> role" value="Started"/>
> <nvpair id="XenConfigClone-meta_attributes-interleave" name="
> interleave" value="true"/>
> <nvpair id="XenConfigClone-meta_attributes-ordered" name="ordered"
> value="true"/>
> </meta_attributes>
> </clone>
> <clone id="XenImagesClone">
> <primitive class="ocf" id="XenImages" provider="heartbeat" type="
> Filesystem">
> <meta_attributes id="XenImages-meta_attributes">
> <nvpair id="XenImages-meta_attributes-is-managed" name="is-
> managed" value="true"/>
> </meta_attributes>
> <operations id="XenImages-operations">
> <op id="XenImages-op-monitor-120" interval="120" name="monitor"/>
> </operations>
> <instance_attributes id="XenImages-instance_attributes">
> <nvpair id="XenImages-instance_attributes-device" name="device"
> value="/dev/mapper/xenimages_part1"/>
> <nvpair id="XenImages-instance_attributes-directory" name="
> directory" value="/var/lib/xen/images"/>
> <nvpair id="XenImages-instance_attributes-fstype" name="fstype"
> value="ocfs2"/>
> </instance_attributes>
> </primitive>
> <meta_attributes id="XenImagesClone-meta_attributes">
> <nvpair id="XenImagesClone-meta_attributes-target-role" name="target-
> role" value="Started"/>
> <nvpair id="XenImagesClone-meta_attributes-interleave" name="
> interleave" value="true"/>
> <nvpair id="XenImagesClone-meta_attributes-ordered" name="ordered"
> value="true"/>
> </meta_attributes>
> </clone>
> </resources>
>
> And all the resource are up and running
>
> 3)Then, using my SAN, I've configured multipath as following:
>
> xenconfig (3600a0b8000754c84000002a04e031e5a) dm-0 IBM,1726-4xx FAStT
> size=19G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
> |-+- policy='round-robin 0' prio=3 status=active
> | |- 3:0:1:0 sdd 8:48 active ready running
> | `- 4:0:1:0 sdh 8:112 active ready running
> `-+- policy='round-robin 0' prio=0 status=enabled
> |- 3:0:0:0 sdb 8:16 active ghost running
> `- 4:0:0:0 sdf 8:80 active ghost running
> xenimages (3600a0b8000754ce3000003024e031dbf) dm-1 IBM,1726-4xx FAStT
> size=400G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
> |-+- policy='round-robin 0' prio=3 status=active
> | |- 3:0:0:1 sdc 8:32 active ready running
> | `- 4:0:0:1 sdg 8:96 active ready running
> `-+- policy='round-robin 0' prio=0 status=enabled
> |- 3:0:1:1 sde 8:64 active ghost running
> `- 4:0:1:1 sdi 8:128 active ghost running
>
> 4)Then I've create the first partition on /dev/mapper/xenconfig.
>
> 5)format the partition as ocfs2
> mkfs.ocfs2 -F /dev/mapper/xenconfig_part1
> mkfs.ocfs2 1.8.0
> Cluster stack: pcmk
> Cluster name: pacemaker
> Stack Flags: 0x0
> NOTE: Feature extended slot map may be enabled
> Label:
> Features: sparse extended-slotmap backup-super unwritten inline-data strict-
> journal-super xattr indexed-dirs refcount discontig-bg
> Block size: 4096 (12 bits)
> Cluster size: 4096 (12 bits)
> Volume size: 20063436800 (4898300 clusters) (4898300 blocks)
> Cluster groups: 152 (tail covers 27644 clusters, rest cover 32256 clusters)
> Extent allocator size: 4194304 (1 groups)
> Journal size: 125394944
> Node slots: 8
> Creating bitmaps: done
> Initializing superblock: done
> Writing system files: done
> Writing superblock: done
> Writing backup superblock: 3 block(s)
> Formatting Journals: done
> Growing extent allocator: done
> Formatting slot map: done
> Formatting quota files: done
> Writing lost+found: done
> mkfs.ocfs2 successful
>
> 6)this is the /etc/sysconfig/o2cb file
> #
> # This is a configuration file for automatic startup of the O2CB
> # driver. It is generated by running /etc/init.d/o2cb configure.
> # On Debian based systems the preferred method is running
> # 'dpkg-reconfigure ocfs2-tools'.
> #
>
> # O2CB_ENABLED: 'true' means to load the driver on boot.
> O2CB_ENABLED=true
>
> # O2CB_STACK: The name of the cluster stack backing O2CB.
> O2CB_STACK=pcmk
>
> # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start.
> O2CB_BOOTCLUSTER=pacemaker
>
> # O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
> O2CB_HEARTBEAT_THRESHOLD=
>
> # O2CB_IDLE_TIMEOUT_MS: Time in ms before a network connection is considered
> dead.
> O2CB_IDLE_TIMEOUT_MS=
>
> # O2CB_KEEPALIVE_DELAY_MS: Max time in ms before a keepalive packet is sent
> O2CB_KEEPALIVE_DELAY_MS=
>
> # O2CB_RECONNECT_DELAY_MS: Min time in ms between connection attempts
> O2CB_RECONNECT_DELAY_MS=
>
>
> 7)nodo5:~ # mount /dev/mapper/xenconfig_part1 /etc/xen/vm/
> mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on
> /etc/xen/vm/. Check 'dmesg' for more information on this error.
> and this is the log messages
>
> Jul 14 09:28:36 nodo5 ocfs2_controld: new client connection 5
> Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
> Jul 14 09:28:36 nodo5 ocfs2_controld: client message 0 from 5: MOUNT
> Jul 14 09:28:36 nodo5 ocfs2_controld: start_mount: uuid
> "5E40DA55CC534CB7AF9A2D402C9BCCF0", device "/dev/mapper/xenconfig_part1",
> service "ocfs2"
> Jul 14 09:28:36 nodo5 ocfs2_controld: Adding service "ocfs2" to device
> "/dev/mapper/xenconfig_part1" uuid "5E40DA55CC534CB7AF9A2D402C9BCCF0"
> Jul 14 09:28:36 nodo5 ocfs2_controld: Starting join for group "ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0"
> Jul 14 09:28:36 nodo5 ocfs2_controld: cpg_join succeeded
> Jul 14 09:28:36 nodo5 ocfs2_controld: start_mount returns 0
> Jul 14 09:28:36 nodo5 ocfs2_controld: confchg called
> Jul 14 09:28:36 nodo5 ocfs2_controld: group "ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0" confchg: members 1, left 0, joined 1
> Jul 14 09:28:36 nodo5 ocfs2_controld: Node 1761913024 joins group ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0
> Jul 14 09:28:36 nodo5 ocfs2_controld: This node joins group ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0
> Jul 14 09:28:36 nodo5 ocfs2_controld: Filling node 1761913024 to group ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0
> Jul 14 09:28:36 nodo5 ocfs2_controld: Registering mountgroup
> 5E40DA55CC534CB7AF9A2D402C9BCCF0 with dlm_controld
> Jul 14 09:28:36 nodo5 ocfs2_controld: Registering
> "5E40DA55CC534CB7AF9A2D402C9BCCF0" with dlm_controld
> Jul 14 09:28:36 nodo5 ocfs2_controld: message from dlmcontrol
> Jul 14 09:28:36 nodo5 ocfs2_controld: Registration of
> "5E40DA55CC534CB7AF9A2D402C9BCCF0" complete
> Jul 14 09:28:36 nodo5 ocfs2_controld: Mountgroup
> 5E40DA55CC534CB7AF9A2D402C9BCCF0 successfully registered with dlm_controld
> Jul 14 09:28:36 nodo5 ocfs2_controld: notify_mount_client sending 0 "OK"
> Jul 14 09:28:36 nodo5 ocfs2_controld: Notified client: 1
> Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
> Jul 14 09:28:36 nodo5 ocfs2_controld: client message 1 from 5: MRESULT
> Jul 14 09:28:36 nodo5 ocfs2_controld: complete_mount: uuid
> "5E40DA55CC534CB7AF9A2D402C9BCCF0", errcode "22", service "ocfs2"
> Jul 14 09:28:36 nodo5 ocfs2_controld: Unregistering mountgroup
> 5E40DA55CC534CB7AF9A2D402C9BCCF0
> Jul 14 09:28:36 nodo5 ocfs2_controld: Unregistering
> "5E40DA55CC534CB7AF9A2D402C9BCCF0" from dlm_controld
> Jul 14 09:28:36 nodo5 ocfs2_controld: time to leave group
> 5E40DA55CC534CB7AF9A2D402C9BCCF0
> Jul 14 09:28:36 nodo5 ocfs2_controld: calling LEAVE for group
> 5E40DA55CC534CB7AF9A2D402C9BCCF0
> Jul 14 09:28:36 nodo5 ocfs2_controld: leaving group "ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0"
> Jul 14 09:28:36 nodo5 ocfs2_controld: cpg_leave succeeded
> Jul 14 09:28:36 nodo5 ocfs2_controld: confchg called
> Jul 14 09:28:36 nodo5 ocfs2_controld: group "ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0" confchg: members 0, left 1, joined 0
> Jul 14 09:28:36 nodo5 ocfs2_controld: Node 1761913024 leaves group ocfs2:
> 5E40DA55CC534CB7AF9A2D402C9BCCF0
> Jul 14 09:28:36 nodo5 ocfs2_controld: notify_mount_client sending 0 "OK"
> Jul 14 09:28:36 nodo5 ocfs2_controld: Notified client: 1
> Jul 14 09:28:36 nodo5 ocfs2_controld: client 6 fd 15 dead
> Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
> Jul 14 09:28:36 nodo5 ocfs2_controld: client 5 fd 14 dead
> Jul 14 09:28:36 nodo5 ocfs2_controld: client 5 fd -1 dead
> Jul 14 09:28:36 nodo5 kernel: [52007.749756] (mount.ocfs2,7720,4):
> ocfs2_initialize_super:2119 ERROR: couldn't mount because of unsupported
> optional features (2000).
Your volume has the feature DISCONTIG_BG which isn't supported by the
kernel.
So ocfs2-tools-1.8 in openSUSE has the default option of discontig_bg? oh...
There are 2 ways to solve this:
1. update your kernel to support discotig_bg.
2. mkfs.ocfs2 your volume w/o discontig_bg.
Thanks
Tao
> Jul 14 09:28:36 nodo5 kernel: [52007.749761] (mount.ocfs2,7720,4):
> ocfs2_fill_super:1021 ERROR: status = -22
> Jul 14 09:28:36 nodo5 kernel: [52007.749770] ocfs2: Unmounting device (253,2)
> on (node 0)
>
> Could someone explain why?
> I've made the same thing with ocfs2-1.4 and all works fine
>
> Regards,
> Roberto.
>
>
>
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel at oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Ocfs2-devel] mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on /etc/xen/vm/. Check 'dmesg' for more information on this error.
2011-07-14 9:04 ` Tao Ma
@ 2011-07-14 14:40 ` Sunil Mushran
0 siblings, 0 replies; 3+ messages in thread
From: Sunil Mushran @ 2011-07-14 14:40 UTC (permalink / raw)
To: ocfs2-devel
On 07/14/2011 02:04 AM, Tao Ma wrote:
> On 07/14/2011 03:47 PM, r.giordani at libero.it wrote:
>> Hello,
>> this is my scenario:
>> 1)I've created a Pacemaker cluster with the following ocfs package on opensuse
>> 11.3 64bit
>> ocfs2console-1.8.0-2.1.x86_64
>> ocfs2-tools-o2cb-1.8.0-2.1.x86_64
>> ocfs2-tools-1.8.0-2.1.x86_64
>>
>> 2)I've configured the cluster as usual :
>> <resources>
>> <clone id="dlm-clone">
>> <meta_attributes id="dlm-clone-meta_attributes">
>> <nvpair id="dlm-clone-meta_attributes-interleave" name="interleave"
>> value="true"/>
>> </meta_attributes>
>> <primitive class="ocf" id="dlm" provider="pacemaker" type="controld">
>> <operations>
>> <op id="dlm-monitor-120s" interval="120s" name="monitor"/>
>> </operations>
>> </primitive>
>> </clone>
>> <clone id="o2cb-clone">
>> <meta_attributes id="o2cb-clone-meta_attributes">
>> <nvpair id="o2cb-clone-meta_attributes-interleave" name="interleave"
>> value="true"/>
>> </meta_attributes>
>> <primitive class="ocf" id="o2cb" provider="ocfs2" type="o2cb">
>> <operations>
>> <op id="o2cb-monitor-120s" interval="120s" name="monitor"/>
>> </operations>
>> </primitive>
>> </clone>
>> <clone id="XenConfigClone">
>> <primitive class="ocf" id="XenConfig" provider="heartbeat" type="
>> Filesystem">
>> <meta_attributes id="XenConfig-meta_attributes">
>> <nvpair id="XenConfig-meta_attributes-is-managed" name="is-
>> managed" value="true"/>
>> <nvpair id="XenConfig-meta_attributes-target-role" name="target-
>> role" value="Started"/>
>> </meta_attributes>
>> <operations id="XenConfig-operations">
>> <op id="XenConfig-op-monitor-120" interval="120" name="monitor"/>
>> </operations>
>> <instance_attributes id="XenConfig-instance_attributes">
>> <nvpair id="XenConfig-instance_attributes-device" name="device"
>> value="/dev/mapper/xenconfig_part1"/>
>> <nvpair id="XenConfig-instance_attributes-directory" name="
>> directory" value="/etc/xen/vm"/>
>> <nvpair id="XenConfig-instance_attributes-fstype" name="fstype"
>> value="ocfs2"/>
>> </instance_attributes>
>> </primitive>
>> <meta_attributes id="XenConfigClone-meta_attributes">
>> <nvpair id="XenConfigClone-meta_attributes-target-role" name="target-
>> role" value="Started"/>
>> <nvpair id="XenConfigClone-meta_attributes-interleave" name="
>> interleave" value="true"/>
>> <nvpair id="XenConfigClone-meta_attributes-ordered" name="ordered"
>> value="true"/>
>> </meta_attributes>
>> </clone>
>> <clone id="XenImagesClone">
>> <primitive class="ocf" id="XenImages" provider="heartbeat" type="
>> Filesystem">
>> <meta_attributes id="XenImages-meta_attributes">
>> <nvpair id="XenImages-meta_attributes-is-managed" name="is-
>> managed" value="true"/>
>> </meta_attributes>
>> <operations id="XenImages-operations">
>> <op id="XenImages-op-monitor-120" interval="120" name="monitor"/>
>> </operations>
>> <instance_attributes id="XenImages-instance_attributes">
>> <nvpair id="XenImages-instance_attributes-device" name="device"
>> value="/dev/mapper/xenimages_part1"/>
>> <nvpair id="XenImages-instance_attributes-directory" name="
>> directory" value="/var/lib/xen/images"/>
>> <nvpair id="XenImages-instance_attributes-fstype" name="fstype"
>> value="ocfs2"/>
>> </instance_attributes>
>> </primitive>
>> <meta_attributes id="XenImagesClone-meta_attributes">
>> <nvpair id="XenImagesClone-meta_attributes-target-role" name="target-
>> role" value="Started"/>
>> <nvpair id="XenImagesClone-meta_attributes-interleave" name="
>> interleave" value="true"/>
>> <nvpair id="XenImagesClone-meta_attributes-ordered" name="ordered"
>> value="true"/>
>> </meta_attributes>
>> </clone>
>> </resources>
>>
>> And all the resource are up and running
>>
>> 3)Then, using my SAN, I've configured multipath as following:
>>
>> xenconfig (3600a0b8000754c84000002a04e031e5a) dm-0 IBM,1726-4xx FAStT
>> size=19G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
>> |-+- policy='round-robin 0' prio=3 status=active
>> | |- 3:0:1:0 sdd 8:48 active ready running
>> | `- 4:0:1:0 sdh 8:112 active ready running
>> `-+- policy='round-robin 0' prio=0 status=enabled
>> |- 3:0:0:0 sdb 8:16 active ghost running
>> `- 4:0:0:0 sdf 8:80 active ghost running
>> xenimages (3600a0b8000754ce3000003024e031dbf) dm-1 IBM,1726-4xx FAStT
>> size=400G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
>> |-+- policy='round-robin 0' prio=3 status=active
>> | |- 3:0:0:1 sdc 8:32 active ready running
>> | `- 4:0:0:1 sdg 8:96 active ready running
>> `-+- policy='round-robin 0' prio=0 status=enabled
>> |- 3:0:1:1 sde 8:64 active ghost running
>> `- 4:0:1:1 sdi 8:128 active ghost running
>>
>> 4)Then I've create the first partition on /dev/mapper/xenconfig.
>>
>> 5)format the partition as ocfs2
>> mkfs.ocfs2 -F /dev/mapper/xenconfig_part1
>> mkfs.ocfs2 1.8.0
>> Cluster stack: pcmk
>> Cluster name: pacemaker
>> Stack Flags: 0x0
>> NOTE: Feature extended slot map may be enabled
>> Label:
>> Features: sparse extended-slotmap backup-super unwritten inline-data strict-
>> journal-super xattr indexed-dirs refcount discontig-bg
>> Block size: 4096 (12 bits)
>> Cluster size: 4096 (12 bits)
>> Volume size: 20063436800 (4898300 clusters) (4898300 blocks)
>> Cluster groups: 152 (tail covers 27644 clusters, rest cover 32256 clusters)
>> Extent allocator size: 4194304 (1 groups)
>> Journal size: 125394944
>> Node slots: 8
>> Creating bitmaps: done
>> Initializing superblock: done
>> Writing system files: done
>> Writing superblock: done
>> Writing backup superblock: 3 block(s)
>> Formatting Journals: done
>> Growing extent allocator: done
>> Formatting slot map: done
>> Formatting quota files: done
>> Writing lost+found: done
>> mkfs.ocfs2 successful
>>
>> 6)this is the /etc/sysconfig/o2cb file
>> #
>> # This is a configuration file for automatic startup of the O2CB
>> # driver. It is generated by running /etc/init.d/o2cb configure.
>> # On Debian based systems the preferred method is running
>> # 'dpkg-reconfigure ocfs2-tools'.
>> #
>>
>> # O2CB_ENABLED: 'true' means to load the driver on boot.
>> O2CB_ENABLED=true
>>
>> # O2CB_STACK: The name of the cluster stack backing O2CB.
>> O2CB_STACK=pcmk
>>
>> # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start.
>> O2CB_BOOTCLUSTER=pacemaker
>>
>> # O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
>> O2CB_HEARTBEAT_THRESHOLD=
>>
>> # O2CB_IDLE_TIMEOUT_MS: Time in ms before a network connection is considered
>> dead.
>> O2CB_IDLE_TIMEOUT_MS=
>>
>> # O2CB_KEEPALIVE_DELAY_MS: Max time in ms before a keepalive packet is sent
>> O2CB_KEEPALIVE_DELAY_MS=
>>
>> # O2CB_RECONNECT_DELAY_MS: Min time in ms between connection attempts
>> O2CB_RECONNECT_DELAY_MS=
>>
>>
>> 7)nodo5:~ # mount /dev/mapper/xenconfig_part1 /etc/xen/vm/
>> mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on
>> /etc/xen/vm/. Check 'dmesg' for more information on this error.
>> and this is the log messages
>>
>> Jul 14 09:28:36 nodo5 ocfs2_controld: new client connection 5
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client message 0 from 5: MOUNT
>> Jul 14 09:28:36 nodo5 ocfs2_controld: start_mount: uuid
>> "5E40DA55CC534CB7AF9A2D402C9BCCF0", device "/dev/mapper/xenconfig_part1",
>> service "ocfs2"
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Adding service "ocfs2" to device
>> "/dev/mapper/xenconfig_part1" uuid "5E40DA55CC534CB7AF9A2D402C9BCCF0"
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Starting join for group "ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0"
>> Jul 14 09:28:36 nodo5 ocfs2_controld: cpg_join succeeded
>> Jul 14 09:28:36 nodo5 ocfs2_controld: start_mount returns 0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: confchg called
>> Jul 14 09:28:36 nodo5 ocfs2_controld: group "ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0" confchg: members 1, left 0, joined 1
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Node 1761913024 joins group ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: This node joins group ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Filling node 1761913024 to group ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Registering mountgroup
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0 with dlm_controld
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Registering
>> "5E40DA55CC534CB7AF9A2D402C9BCCF0" with dlm_controld
>> Jul 14 09:28:36 nodo5 ocfs2_controld: message from dlmcontrol
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Registration of
>> "5E40DA55CC534CB7AF9A2D402C9BCCF0" complete
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Mountgroup
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0 successfully registered with dlm_controld
>> Jul 14 09:28:36 nodo5 ocfs2_controld: notify_mount_client sending 0 "OK"
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Notified client: 1
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client message 1 from 5: MRESULT
>> Jul 14 09:28:36 nodo5 ocfs2_controld: complete_mount: uuid
>> "5E40DA55CC534CB7AF9A2D402C9BCCF0", errcode "22", service "ocfs2"
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Unregistering mountgroup
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Unregistering
>> "5E40DA55CC534CB7AF9A2D402C9BCCF0" from dlm_controld
>> Jul 14 09:28:36 nodo5 ocfs2_controld: time to leave group
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: calling LEAVE for group
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: leaving group "ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0"
>> Jul 14 09:28:36 nodo5 ocfs2_controld: cpg_leave succeeded
>> Jul 14 09:28:36 nodo5 ocfs2_controld: confchg called
>> Jul 14 09:28:36 nodo5 ocfs2_controld: group "ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0" confchg: members 0, left 1, joined 0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Node 1761913024 leaves group ocfs2:
>> 5E40DA55CC534CB7AF9A2D402C9BCCF0
>> Jul 14 09:28:36 nodo5 ocfs2_controld: notify_mount_client sending 0 "OK"
>> Jul 14 09:28:36 nodo5 ocfs2_controld: Notified client: 1
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client 6 fd 15 dead
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client msg
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client 5 fd 14 dead
>> Jul 14 09:28:36 nodo5 ocfs2_controld: client 5 fd -1 dead
>> Jul 14 09:28:36 nodo5 kernel: [52007.749756] (mount.ocfs2,7720,4):
>> ocfs2_initialize_super:2119 ERROR: couldn't mount because of unsupported
>> optional features (2000).
> Your volume has the feature DISCONTIG_BG which isn't supported by the
> kernel.
> So ocfs2-tools-1.8 in openSUSE has the default option of discontig_bg? oh...
>
> There are 2 ways to solve this:
> 1. update your kernel to support discotig_bg.
> 2. mkfs.ocfs2 your volume w/o discontig_bg.
Which kernel is this? AFAIR, discontig_bg was added in 2.6.35.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-07-14 14:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-14 7:47 [Ocfs2-devel] mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on /etc/xen/vm/. Check 'dmesg' for more information on this error r.giordani at libero.it
2011-07-14 9:04 ` Tao Ma
2011-07-14 14:40 ` Sunil Mushran
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.