From: Chanwoo Choi <cw00.choi@samsung.com>
To: Boojin Kim <boojin.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Kukjin Kim <kgene.kim@samsung.com>,
Russell King <linux@arm.linux.org.uk>,
Vinod Koul <vinod.koul@intel.com>,
Jassi Brar <jassisinghbrar@gmail.com>,
Grant Likely <grant.likely@secretlab.ca>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Dan Williams <dan.j.williams@intel.com>,
Kyungmin Park <kyungmin.park@samsung.com>
Subject: [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM
Date: Wed, 27 Jul 2011 15:14:27 +0900 [thread overview]
Message-ID: <4E2FACC3.2010109@samsung.com> (raw)
In-Reply-To: <1311744697-10264-2-git-send-email-boojin.kim@samsung.com>
This patch update runtime PM for PL330 DMAC to reduce power consumption.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
The following patch support runtime PM for PL330 DMAC, but the clock
of PL330 is always on. If the clock of PL330 is always on, additional power
(10mA) is consumed.
"[PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC"
http://permalink.gmane.org/gmane.linux.kernel.samsung-soc/5931
arch/arm/plat-samsung/dma-ops.c | 21 +++++++++++
drivers/dma/pl330.c | 76 +++++++++++++--------------------------
include/linux/amba/pl330.h | 54 +++++++++++++++++++++++++++
3 files changed, 100 insertions(+), 51 deletions(-)
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 9053433..b726e4a 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/amba/pl330.h>
+#include <linux/pm_runtime.h>
#include <mach/dma.h>
@@ -33,12 +34,23 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct dma_chan *chan;
dma_cap_mask_t mask;
struct dma_slave_config slave_config;
+#ifdef CONFIG_PM_RUNTIME
+ struct dma_pl330_chan *pch;
+ struct dma_pl330_dmac *pdmac;
+#endif
dma_cap_zero(mask);
dma_cap_set(info->cap, mask);
chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+#ifdef CONFIG_PM_RUNTIME
+ pch = container_of(chan, struct dma_pl330_chan, chan);
+ pdmac = pch->dmac;
+
+ pm_runtime_get_sync(pdmac->pif.dev);
+#endif
+
if (info->direction == DMA_FROM_DEVICE) {
memset(&slave_config, 0, sizeof(struct dma_slave_config));
slave_config.direction = info->direction;
@@ -59,8 +71,17 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
static int samsung_dmadev_release(unsigned ch,
struct s3c2410_dma_client *client)
{
+#ifdef CONFIG_PM_RUNTIME
+ struct dma_pl330_chan *pch =
+ container_of((struct dma_chan *)ch, struct dma_pl330_chan, chan);
+ struct dma_pl330_dmac *pdmac = pdmac = pch->dmac;;
+#endif
+
dma_release_channel((struct dma_chan *)ch);
+#ifdef CONFIG_PM_RUNTIME
+ pm_runtime_put(pdmac->pif.dev);
+#endif
return 0;
}
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 121c75a..14d0ba6 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -42,57 +42,6 @@ enum desc_status {
DONE,
};
-struct dma_pl330_chan {
- /* Schedule desc completion */
- struct tasklet_struct task;
-
- /* DMA-Engine Channel */
- struct dma_chan chan;
-
- /* Last completed cookie */
- dma_cookie_t completed;
-
- /* List of to be xfered descriptors */
- struct list_head work_list;
-
- /* Pointer to the DMAC that manages this channel,
- * NULL if the channel is available to be acquired.
- * As the parent, this DMAC also provides descriptors
- * to the channel.
- */
- struct dma_pl330_dmac *dmac;
-
- /* To protect channel manipulation */
- spinlock_t lock;
-
- /* Token of a hardware channel thread of PL330 DMAC
- * NULL if the channel is available to be acquired.
- */
- void *pl330_chid;
-
- /* taks for cyclic capability */
- struct tasklet_struct *cyclic_task;
-
- bool cyclic;
-};
-
-struct dma_pl330_dmac {
- struct pl330_info pif;
-
- /* DMA-Engine Device */
- struct dma_device ddma;
-
- /* Pool of descriptors available for the DMAC's channels */
- struct list_head desc_pool;
- /* To protect desc_pool manipulation */
- spinlock_t pool_lock;
-
- /* Peripheral channels connected to this DMAC */
- struct dma_pl330_chan peripherals[0]; /* keep at end */
-
- struct clk *clk;
-};
-
struct dma_pl330_desc {
/* To attach to a queue as child */
struct list_head node;
@@ -935,6 +884,18 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
pi->pcfg.num_peri, pi->pcfg.num_events);
+#ifdef CONFIG_PM_RUNTIME
+ /* disable the power domain */
+ ret = pm_runtime_put(&adev->dev);
+ if (ret < 0) {
+ dev_err(&adev->dev, "failed to put runtime pm\n");
+ ret = -ENODEV;
+ goto probe_err4;
+ }
+#else
+ /* disable dma clk */
+ clk_disable(pdmac->clk);
+#endif
return 0;
probe_err4:
@@ -943,6 +904,13 @@ probe_err3:
free_irq(irq, pi);
probe_err2:
iounmap(pi->base);
+
+#ifdef CONFIG_PM_RUNTIME
+ pm_runtime_disable(&adev->dev);
+ pm_runtime_put(&adev->dev);
+#else
+ clk_disable(pdmac->clk);
+#endif
probe_err1:
release_mem_region(res->start, resource_size(res));
kfree(pdmac);
@@ -961,6 +929,12 @@ static int __devexit pl330_remove(struct amba_device *adev)
if (!pdmac)
return 0;
+#ifdef CONFIG_PM_RUNTIME
+ pm_runtime_get_sync(&adev->dev);
+#else
+ clk_enable(pdmac->clk);
+#endif
+
amba_set_drvdata(adev, NULL);
/* Idle the DMAC */
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index 17b0ada..d9a63fd 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -12,6 +12,9 @@
#ifndef __AMBA_PL330_H_
#define __AMBA_PL330_H_
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
#include <asm/hardware/pl330.h>
struct dma_pl330_peri {
@@ -42,4 +45,55 @@ struct dma_pl330_platdata {
unsigned mcbuf_sz;
};
+struct dma_pl330_chan {
+ /* Schedule desc completion */
+ struct tasklet_struct task;
+
+ /* DMA-Engine Channel */
+ struct dma_chan chan;
+
+ /* Last completed cookie */
+ dma_cookie_t completed;
+
+ /* List of to be xfered descriptors */
+ struct list_head work_list;
+
+ /* Pointer to the DMAC that manages this channel,
+ * NULL if the channel is available to be acquired.
+ * As the parent, this DMAC also provides descriptors
+ * to the channel.
+ */
+ struct dma_pl330_dmac *dmac;
+
+ /* To protect channel manipulation */
+ spinlock_t lock;
+
+ /* Token of a hardware channel thread of PL330 DMAC
+ * NULL if the channel is available to be acquired.
+ */
+ void *pl330_chid;
+
+ /* taks for cyclic capability */
+ struct tasklet_struct *cyclic_task;
+
+ bool cyclic;
+};
+
+struct dma_pl330_dmac {
+ struct pl330_info pif;
+
+ /* DMA-Engine Device */
+ struct dma_device ddma;
+
+ /* Pool of descriptors available for the DMAC's channels */
+ struct list_head desc_pool;
+ /* To protect desc_pool manipulation */
+ spinlock_t pool_lock;
+
+ /* Peripheral channels connected to this DMAC */
+ struct dma_pl330_chan peripherals[0]; /* keep at end */
+
+ struct clk *clk;
+};
+
#endif /* __AMBA_PL330_H_ */
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM
Date: Wed, 27 Jul 2011 15:14:27 +0900 [thread overview]
Message-ID: <4E2FACC3.2010109@samsung.com> (raw)
In-Reply-To: <1311744697-10264-2-git-send-email-boojin.kim@samsung.com>
This patch update runtime PM for PL330 DMAC to reduce power consumption.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
The following patch support runtime PM for PL330 DMAC, but the clock
of PL330 is always on. If the clock of PL330 is always on, additional power
(10mA) is consumed.
"[PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC"
http://permalink.gmane.org/gmane.linux.kernel.samsung-soc/5931
arch/arm/plat-samsung/dma-ops.c | 21 +++++++++++
drivers/dma/pl330.c | 76 +++++++++++++--------------------------
include/linux/amba/pl330.h | 54 +++++++++++++++++++++++++++
3 files changed, 100 insertions(+), 51 deletions(-)
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 9053433..b726e4a 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/amba/pl330.h>
+#include <linux/pm_runtime.h>
#include <mach/dma.h>
@@ -33,12 +34,23 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct dma_chan *chan;
dma_cap_mask_t mask;
struct dma_slave_config slave_config;
+#ifdef CONFIG_PM_RUNTIME
+ struct dma_pl330_chan *pch;
+ struct dma_pl330_dmac *pdmac;
+#endif
dma_cap_zero(mask);
dma_cap_set(info->cap, mask);
chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+#ifdef CONFIG_PM_RUNTIME
+ pch = container_of(chan, struct dma_pl330_chan, chan);
+ pdmac = pch->dmac;
+
+ pm_runtime_get_sync(pdmac->pif.dev);
+#endif
+
if (info->direction == DMA_FROM_DEVICE) {
memset(&slave_config, 0, sizeof(struct dma_slave_config));
slave_config.direction = info->direction;
@@ -59,8 +71,17 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
static int samsung_dmadev_release(unsigned ch,
struct s3c2410_dma_client *client)
{
+#ifdef CONFIG_PM_RUNTIME
+ struct dma_pl330_chan *pch =
+ container_of((struct dma_chan *)ch, struct dma_pl330_chan, chan);
+ struct dma_pl330_dmac *pdmac = pdmac = pch->dmac;;
+#endif
+
dma_release_channel((struct dma_chan *)ch);
+#ifdef CONFIG_PM_RUNTIME
+ pm_runtime_put(pdmac->pif.dev);
+#endif
return 0;
}
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 121c75a..14d0ba6 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -42,57 +42,6 @@ enum desc_status {
DONE,
};
-struct dma_pl330_chan {
- /* Schedule desc completion */
- struct tasklet_struct task;
-
- /* DMA-Engine Channel */
- struct dma_chan chan;
-
- /* Last completed cookie */
- dma_cookie_t completed;
-
- /* List of to be xfered descriptors */
- struct list_head work_list;
-
- /* Pointer to the DMAC that manages this channel,
- * NULL if the channel is available to be acquired.
- * As the parent, this DMAC also provides descriptors
- * to the channel.
- */
- struct dma_pl330_dmac *dmac;
-
- /* To protect channel manipulation */
- spinlock_t lock;
-
- /* Token of a hardware channel thread of PL330 DMAC
- * NULL if the channel is available to be acquired.
- */
- void *pl330_chid;
-
- /* taks for cyclic capability */
- struct tasklet_struct *cyclic_task;
-
- bool cyclic;
-};
-
-struct dma_pl330_dmac {
- struct pl330_info pif;
-
- /* DMA-Engine Device */
- struct dma_device ddma;
-
- /* Pool of descriptors available for the DMAC's channels */
- struct list_head desc_pool;
- /* To protect desc_pool manipulation */
- spinlock_t pool_lock;
-
- /* Peripheral channels connected to this DMAC */
- struct dma_pl330_chan peripherals[0]; /* keep at end */
-
- struct clk *clk;
-};
-
struct dma_pl330_desc {
/* To attach to a queue as child */
struct list_head node;
@@ -935,6 +884,18 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
pi->pcfg.num_peri, pi->pcfg.num_events);
+#ifdef CONFIG_PM_RUNTIME
+ /* disable the power domain */
+ ret = pm_runtime_put(&adev->dev);
+ if (ret < 0) {
+ dev_err(&adev->dev, "failed to put runtime pm\n");
+ ret = -ENODEV;
+ goto probe_err4;
+ }
+#else
+ /* disable dma clk */
+ clk_disable(pdmac->clk);
+#endif
return 0;
probe_err4:
@@ -943,6 +904,13 @@ probe_err3:
free_irq(irq, pi);
probe_err2:
iounmap(pi->base);
+
+#ifdef CONFIG_PM_RUNTIME
+ pm_runtime_disable(&adev->dev);
+ pm_runtime_put(&adev->dev);
+#else
+ clk_disable(pdmac->clk);
+#endif
probe_err1:
release_mem_region(res->start, resource_size(res));
kfree(pdmac);
@@ -961,6 +929,12 @@ static int __devexit pl330_remove(struct amba_device *adev)
if (!pdmac)
return 0;
+#ifdef CONFIG_PM_RUNTIME
+ pm_runtime_get_sync(&adev->dev);
+#else
+ clk_enable(pdmac->clk);
+#endif
+
amba_set_drvdata(adev, NULL);
/* Idle the DMAC */
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index 17b0ada..d9a63fd 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -12,6 +12,9 @@
#ifndef __AMBA_PL330_H_
#define __AMBA_PL330_H_
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
#include <asm/hardware/pl330.h>
struct dma_pl330_peri {
@@ -42,4 +45,55 @@ struct dma_pl330_platdata {
unsigned mcbuf_sz;
};
+struct dma_pl330_chan {
+ /* Schedule desc completion */
+ struct tasklet_struct task;
+
+ /* DMA-Engine Channel */
+ struct dma_chan chan;
+
+ /* Last completed cookie */
+ dma_cookie_t completed;
+
+ /* List of to be xfered descriptors */
+ struct list_head work_list;
+
+ /* Pointer to the DMAC that manages this channel,
+ * NULL if the channel is available to be acquired.
+ * As the parent, this DMAC also provides descriptors
+ * to the channel.
+ */
+ struct dma_pl330_dmac *dmac;
+
+ /* To protect channel manipulation */
+ spinlock_t lock;
+
+ /* Token of a hardware channel thread of PL330 DMAC
+ * NULL if the channel is available to be acquired.
+ */
+ void *pl330_chid;
+
+ /* taks for cyclic capability */
+ struct tasklet_struct *cyclic_task;
+
+ bool cyclic;
+};
+
+struct dma_pl330_dmac {
+ struct pl330_info pif;
+
+ /* DMA-Engine Device */
+ struct dma_device ddma;
+
+ /* Pool of descriptors available for the DMAC's channels */
+ struct list_head desc_pool;
+ /* To protect desc_pool manipulation */
+ spinlock_t pool_lock;
+
+ /* Peripheral channels connected to this DMAC */
+ struct dma_pl330_chan peripherals[0]; /* keep at end */
+
+ struct clk *clk;
+};
+
#endif /* __AMBA_PL330_H_ */
next prev parent reply other threads:[~2011-07-27 6:13 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-27 5:31 [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 6:14 ` Chanwoo Choi [this message]
2011-07-27 6:14 ` [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM Chanwoo Choi
2011-07-27 7:31 ` Jassi Brar
2011-07-27 7:31 ` Jassi Brar
2011-07-27 8:53 ` Russell King - ARM Linux
2011-07-27 8:53 ` Russell King - ARM Linux
2011-07-27 9:43 ` Chanwoo Choi
2011-07-27 9:43 ` Chanwoo Choi
2011-07-27 7:43 ` [PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC Jassi Brar
2011-07-27 7:43 ` Jassi Brar
2011-07-27 5:31 ` [PATCH 02/15] DMA: PL330: Update PL330 DMA API driver Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 03/15] DMA: PL330: Support DMA_SLAVE_CONFIG command Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 04/15] DMA: PL330: Add DMA_CYCLIC capability Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 05/15] ARM: SAMSUNG: Update to use PL330-DMA driver Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 06/15] ARM: SAMSUNG: Add common DMA operations Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-08-15 9:36 ` Thomas Abraham
2011-08-15 9:36 ` Thomas Abraham
2011-08-15 14:15 ` Thomas Abraham
2011-08-15 14:15 ` Thomas Abraham
2011-08-21 8:51 ` Russell King - ARM Linux
2011-08-21 8:51 ` Russell King - ARM Linux
2011-07-27 5:31 ` [PATCH 08/15] ARM: S5PV210: " Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 09/15] ARM: S5PC100: " Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 10/15] ARM: S5P64X0: " Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 11/15] ARM: SAMSUNG: Remove S3C-PL330-DMA driver Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 12/15] spi/s3c64xx: Add support DMA engine API Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-08-08 17:47 ` Jassi Brar
2011-08-08 17:47 ` Jassi Brar
2011-08-08 17:55 ` Heiko Stübner
2011-08-08 17:55 ` Heiko Stübner
2011-08-08 18:16 ` Jassi Brar
2011-08-08 18:16 ` Jassi Brar
2011-08-08 18:26 ` Heiko Stübner
2011-08-08 18:26 ` Heiko Stübner
2011-08-09 4:13 ` Alim Akhtar
2011-08-09 4:13 ` Alim Akhtar
2011-08-19 10:30 ` Alim Akhtar
2011-08-19 10:30 ` Alim Akhtar
2011-08-21 8:46 ` Russell King - ARM Linux
2011-08-21 8:46 ` Russell King - ARM Linux
2011-08-25 1:13 ` Alim Akhtar
2011-08-25 1:13 ` Alim Akhtar
2011-08-11 7:42 ` Boojin Kim
2011-08-11 7:42 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 13/15] spi/s3c64xx: Merge dma control code Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-08-08 18:32 ` Jassi Brar
2011-08-08 18:32 ` Jassi Brar
2011-07-27 5:31 ` [PATCH 14/15] ASoC: Samsung: Update DMA interface Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-08-08 19:27 ` Jassi Brar
2011-08-08 19:27 ` Jassi Brar
2011-08-11 10:04 ` Boojin Kim
2011-08-11 10:04 ` Boojin Kim
2011-07-27 5:31 ` [PATCH 15/15] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction Boojin Kim
2011-07-27 5:31 ` Boojin Kim
2011-08-04 16:53 ` [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA Linus Walleij
2011-08-04 16:53 ` Linus Walleij
2011-08-08 16:45 ` Koul, Vinod
2011-08-08 16:45 ` Koul, Vinod
2011-08-11 7:26 ` Kukjin Kim
2011-08-11 7:26 ` Kukjin Kim
2011-08-11 22:27 ` Koul, Vinod
2011-08-11 22:27 ` Koul, Vinod
2011-08-13 4:11 ` Kukjin Kim
2011-08-13 4:11 ` Kukjin Kim
2011-08-16 11:01 ` Koul, Vinod
2011-08-16 11:01 ` Koul, Vinod
2011-08-19 5:24 ` Kukjin Kim
2011-08-19 5:24 ` Kukjin Kim
2011-08-19 13:04 ` Koul, Vinod
2011-08-19 13:04 ` Koul, Vinod
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E2FACC3.2010109@samsung.com \
--to=cw00.choi@samsung.com \
--cc=boojin.kim@samsung.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dan.j.williams@intel.com \
--cc=grant.likely@secretlab.ca \
--cc=jassisinghbrar@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.