crownbay-noemgd poky-image-minimal fails to build

crownbay-noemgd poky-image-minimal fails to build

[Andre Haupt]

[-- Attachment #1: Type: text/plain, Size: 525 bytes --]

Hi all,

I am trying to build a poky bernard image for crownbay-noemgd.
For this i checked out the bernard branch of both poky and meta-intel
from git.yoctoproject.org.

Bitbake fails during the kernels compile_perf task complaining that it can not
find libdw.h and bfd.h and that using /usr/local/include as include
location is unsafe for cross compilation (full log attached).

What do i miss here?

Btw, the build host is fedora 13.
(this time on real hardware, not in a virtual machine)

thanks,

Andre

[-- Attachment #2: log.do_compile_perf.12050 --]
[-- Type: text/plain, Size: 4229 bytes --]

NOTE: make -C /home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/work/crownbay_noemgd-poky-linux/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_1+56fe215d3f1a2cc3a5a26482ac9809ba44495695-r1/linux/tools/perf CC=ccache i586-poky-linux-gcc -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/sysroots/crownbay-noemgd LD=i586-poky-linux-ld --sysroot=/home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/sysroots/crownbay-noemgd prefix=/usr NO_NEWT=1 NO_DWARF=1
make: Entering directory `/home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/work/crownbay_noemgd-poky-linux/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_1+56fe215d3f1a2cc3a5a26482ac9809ba44495695-r1/linux/tools/perf'
Makefile:508: No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev
Makefile:563: No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling
PERF_VERSION = 0.0.2.PERF
make: Leaving directory `/home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/work/crownbay_noemgd-poky-linux/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_1+56fe215d3f1a2cc3a5a26482ac9809ba44495695-r1/linux/tools/perf'
make: Entering directory `/home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/work/crownbay_noemgd-poky-linux/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_1+56fe215d3f1a2cc3a5a26482ac9809ba44495695-r1/linux/tools/perf'
Makefile:508: No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev
Makefile:563: No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling
    GEN common-cmds.h
    * new build flags or prefix
    CC perf.o
    CC builtin-annotate.o
    CC builtin-bench.o
    CC bench/sched-messaging.o
    CC bench/sched-pipe.o
    CC bench/mem-memcpy.o
    CC builtin-diff.o
    CC builtin-help.o
    CC builtin-sched.o
    CC builtin-buildid-list.o
    CC builtin-buildid-cache.o
    CC builtin-list.o
    CC builtin-record.o
    CC builtin-report.o
    CC builtin-stat.o
    CC builtin-timechart.o
    CC builtin-top.o
    CC builtin-trace.o
    CC builtin-probe.o
    CC builtin-kmem.o
    CC builtin-lock.o
    CC util/abspath.o
    CC util/alias.o
    CC util/build-id.o
    CC util/config.o
    CC util/ctype.o
    CC util/debugfs.o
    CC util/environment.o
    CC util/event.o
    CC util/exec_cmd.o
    CC util/help.o
    CC util/levenshtein.o
    CC util/parse-options.o
    CC util/parse-events.o
    CC util/path.o
    CC util/rbtree.o
    CC util/bitmap.o
    CC util/hweight.o
    CC util/find_next_bit.o
    CC util/run-command.o
    CC util/quote.o
    CC util/strbuf.o
    CC util/string.o
    CC util/strlist.o
    CC util/usage.o
    CC util/wrapper.o
    CC util/sigchain.o
    CC util/symbol.o
    CC util/color.o
    CC util/pager.o
    CC util/header.o
    CC util/callchain.o
    CC util/values.o
    CC util/debug.o
    CC util/map.o
    CC util/session.o
    CC util/thread.o
    CC util/trace-event-parse.o
    CC util/trace-event-read.o
    CC util/trace-event-info.o
    CC util/trace-event-scripting.o
    CC util/svghelper.o
    CC util/sort.o
    CC util/hist.o
    CC util/probe-event.o
    CC util/util.o
    CC util/cpumap.o
    CC util/scripting-engines/trace-event-perl.o
cc1: warnings being treated as errors
cc1: error: include location "/usr/local/include" is unsafe for cross-compilation
make: *** [util/scripting-engines/trace-event-perl.o] Error 1
make: Leaving directory `/home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/work/crownbay_noemgd-poky-linux/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_1+56fe215d3f1a2cc3a5a26482ac9809ba44495695-r1/linux/tools/perf'
FATAL: oe_runmake failed
ERROR: Function 'do_compile_perf' failed (see /home/ahaupt/yocto-git/builds/crownbay-noemgd/tmp/work/crownbay_noemgd-poky-linux/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_1+56fe215d3f1a2cc3a5a26482ac9809ba44495695-r1/temp/log.do_compile_perf.12050 for further information)

Re: crownbay-noemgd poky-image-minimal fails to build

[Andre Haupt]

On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
> Hi all,
> 
> I am trying to build a poky bernard image for crownbay-noemgd.
> For this i checked out the bernard branch of both poky and meta-intel
> from git.yoctoproject.org.
> 
> Bitbake fails during the kernels compile_perf task complaining that it can not
> find libdw.h and bfd.h and that using /usr/local/include as include
> location is unsafe for cross compilation (full log attached).
> 
> What do i miss here?

I did work around this with

diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb b/meta/recipes-
index 3c1e669..85caa92 100644
--- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
+++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
@@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
 addtask kernel_link_vmlinux after do_compile before do_install
  addtask validate_branches before do_patch after do_kernel_checkout
   
  -require linux-tools.inc
  +#require linux-tools.inc


not sure that this is the right thing to do though.

cheers,

Andre

Re: crownbay-noemgd poky-image-minimal fails to build

[Bruce Ashfield]

On 07/29/11 06:05, Andre Haupt wrote:
> On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
>> Hi all,
>>
>> I am trying to build a poky bernard image for crownbay-noemgd.
>> For this i checked out the bernard branch of both poky and meta-intel
>> from git.yoctoproject.org.
>>
>> Bitbake fails during the kernels compile_perf task complaining that it can not
>> find libdw.h and bfd.h and that using /usr/local/include as include
>> location is unsafe for cross compilation (full log attached).
>>
>> What do i miss here?
>
> I did work around this with
>
> diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb b/meta/recipes-
> index 3c1e669..85caa92 100644
> --- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
> +++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
> @@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
>   addtask kernel_link_vmlinux after do_compile before do_install
>    addtask validate_branches before do_patch after do_kernel_checkout
>
>    -require linux-tools.inc
>    +#require linux-tools.inc
>
>
> not sure that this is the right thing to do though.

It's an acceptable work around to keep you building on your
local machine, assuming that you don't need perf. But the
linux-yocto recipes always want to provide perf, and hence
have that include.

I'm trying to dust off my memory here. I know that this has
been seen, and I also know that this built fine in the bernard
release.

The first part of the issue is the:

Makefile:508: No libdw.h found or old libdw.h found, disables dwarf 
support. Please install elfutils-devel/elfutils-dev

We may have a missing host dependency in the checks. Have you
tried installing the relevant package for F13 ?

As for the second, there's a patch in the 2.6.34 kernel tree
that is dealing with it:

http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791

It sounds like there may be a SRCREV problem for the board that
isn't picking up that change. Can you confirm that this commit
is in your board branch ?  You can check in your build directory
for linux.

Bruce

>
> cheers,
>
> Andre
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: crownbay-noemgd poky-image-minimal fails to build

[Malcolm Crossley]

On 29/07/2011 14:12, Bruce Ashfield wrote:
> On 07/29/11 06:05, Andre Haupt wrote:
>> On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
>>> Hi all,
>>>
>>> I am trying to build a poky bernard image for crownbay-noemgd.
>>> For this i checked out the bernard branch of both poky and meta-intel
>>> from git.yoctoproject.org.
>>>
>>> Bitbake fails during the kernels compile_perf task complaining that 
>>> it can not
>>> find libdw.h and bfd.h and that using /usr/local/include as include
>>> location is unsafe for cross compilation (full log attached).
>>>
>>> What do i miss here?
>>
>> I did work around this with
>>
>> diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb 
>> b/meta/recipes-
>> index 3c1e669..85caa92 100644
>> --- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>> +++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>> @@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
>>   addtask kernel_link_vmlinux after do_compile before do_install
>>    addtask validate_branches before do_patch after do_kernel_checkout
>>
>>    -require linux-tools.inc
>>    +#require linux-tools.inc
>>
>>
>> not sure that this is the right thing to do though.
>
> It's an acceptable work around to keep you building on your
> local machine, assuming that you don't need perf. But the
> linux-yocto recipes always want to provide perf, and hence
> have that include.
>
> I'm trying to dust off my memory here. I know that this has
> been seen, and I also know that this built fine in the bernard
> release.
>
> The first part of the issue is the:
>
> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf 
> support. Please install elfutils-devel/elfutils-dev
>
> We may have a missing host dependency in the checks. Have you
> tried installing the relevant package for F13 ?
>
> As for the second, there's a patch in the 2.6.34 kernel tree
> that is dealing with it:
>
> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791 
>
>
> It sounds like there may be a SRCREV problem for the board that
> isn't picking up that change. Can you confirm that this commit
> is in your board branch ?  You can check in your build directory
> for linux.

I have found that stable branch 2.6.34 contains a bug when trying to 
build the perf tools. I have a patch but I've not been able to upstream 
it yet, I've copy pasted it inline here, hopefully it doesn't wrap too 
badly:

Author: Malcolm Crossley <malcolm.crossley@ge.com>
Date:   Fri Jul 22 22:44:53 2011 +0100

     Kernel version 2.6.34.6. has a bug with regards to it's perf tool 
source files. This patch adds a missing include directive.

     Signed-off-by: Malcolm Crossley <malcolm.crossley@ge.com>

diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 6fb379b..3c497c5 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -73,6 +73,7 @@
  #include <unistd.h>
  #include <sys/types.h>
  #include <sys/syscall.h>
+#include <stdbool.h>

  #include "../../include/linux/perf_event.h"
  #include "util/types.h"


Regards

Malcolm

>
> Bruce
>
>>
>> cheers,
>>
>> Andre
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: crownbay-noemgd poky-image-minimal fails to build

[Bruce Ashfield]

On 07/29/11 09:57, Malcolm Crossley wrote:
> On 29/07/2011 14:12, Bruce Ashfield wrote:
>> On 07/29/11 06:05, Andre Haupt wrote:
>>> On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
>>>> Hi all,
>>>>
>>>> I am trying to build a poky bernard image for crownbay-noemgd.
>>>> For this i checked out the bernard branch of both poky and meta-intel
>>>> from git.yoctoproject.org.
>>>>
>>>> Bitbake fails during the kernels compile_perf task complaining that
>>>> it can not
>>>> find libdw.h and bfd.h and that using /usr/local/include as include
>>>> location is unsafe for cross compilation (full log attached).
>>>>
>>>> What do i miss here?
>>>
>>> I did work around this with
>>>
>>> diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>> b/meta/recipes-
>>> index 3c1e669..85caa92 100644
>>> --- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>> +++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>> @@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
>>> addtask kernel_link_vmlinux after do_compile before do_install
>>> addtask validate_branches before do_patch after do_kernel_checkout
>>>
>>> -require linux-tools.inc
>>> +#require linux-tools.inc
>>>
>>>
>>> not sure that this is the right thing to do though.
>>
>> It's an acceptable work around to keep you building on your
>> local machine, assuming that you don't need perf. But the
>> linux-yocto recipes always want to provide perf, and hence
>> have that include.
>>
>> I'm trying to dust off my memory here. I know that this has
>> been seen, and I also know that this built fine in the bernard
>> release.
>>
>> The first part of the issue is the:
>>
>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>> support. Please install elfutils-devel/elfutils-dev
>>
>> We may have a missing host dependency in the checks. Have you
>> tried installing the relevant package for F13 ?
>>
>> As for the second, there's a patch in the 2.6.34 kernel tree
>> that is dealing with it:
>>
>> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791
>>
>>
>> It sounds like there may be a SRCREV problem for the board that
>> isn't picking up that change. Can you confirm that this commit
>> is in your board branch ? You can check in your build directory
>> for linux.
>
> I have found that stable branch 2.6.34 contains a bug when trying to
> build the perf tools. I have a patch but I've not been able to upstream
> it yet, I've copy pasted it inline here, hopefully it doesn't wrap too
> badly:

Just so I've got all the context here. This failure is
on top of the one you were asking about ? (the unsafe
/ includes). And this is unique to the 2.6.34-stable
perf variant (i.e. no other newer kernel release has
the issue) ?

with those answers, I can appropriately deal with it
and vector it to the right places.

Cheers,

Bruce

>
> Author: Malcolm Crossley <malcolm.crossley@ge.com>
> Date: Fri Jul 22 22:44:53 2011 +0100
>
> Kernel version 2.6.34.6. has a bug with regards to it's perf tool source
> files. This patch adds a missing include directive.
>
> Signed-off-by: Malcolm Crossley <malcolm.crossley@ge.com>
>
> diff --git a/tools/perf/perf.h b/tools/perf/perf.h
> index 6fb379b..3c497c5 100644
> --- a/tools/perf/perf.h
> +++ b/tools/perf/perf.h
> @@ -73,6 +73,7 @@
> #include <unistd.h>
> #include <sys/types.h>
> #include <sys/syscall.h>
> +#include <stdbool.h>
>
> #include "../../include/linux/perf_event.h"
> #include "util/types.h"
>
>
> Regards
>
> Malcolm
>
>>
>> Bruce
>>
>>>
>>> cheers,
>>>
>>> Andre
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: crownbay-noemgd poky-image-minimal fails to build

[Andre Haupt]

Hi Bruce,

thanks for your comments. See below

On Fri, Jul 29, 2011 at 09:12:22AM -0400, Bruce Ashfield wrote:
> I'm trying to dust off my memory here. I know that this has
> been seen, and I also know that this built fine in the bernard
> release.
> 
> The first part of the issue is the:
> 
> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
> support. Please install elfutils-devel/elfutils-dev
> 
> We may have a missing host dependency in the checks. Have you
> tried installing the relevant package for F13 ?
I had elfutils-devel installed.

> As for the second, there's a patch in the 2.6.34 kernel tree
> that is dealing with it:
> 
> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791
> 
> It sounds like there may be a SRCREV problem for the board that
> isn't picking up that change. Can you confirm that this commit
> is in your board branch ?  You can check in your build directory
> for linux.
This commit is not in the crownbay-standard branch.

cheers,

Andre

Re: crownbay-noemgd poky-image-minimal fails to build

[Bruce Ashfield]

On 07/29/11 10:03, Andre Haupt wrote:
> Hi Bruce,
>
> thanks for your comments. See below
>
> On Fri, Jul 29, 2011 at 09:12:22AM -0400, Bruce Ashfield wrote:
>> I'm trying to dust off my memory here. I know that this has
>> been seen, and I also know that this built fine in the bernard
>> release.
>>
>> The first part of the issue is the:
>>
>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>> support. Please install elfutils-devel/elfutils-dev
>>
>> We may have a missing host dependency in the checks. Have you
>> tried installing the relevant package for F13 ?
> I had elfutils-devel installed.
>
>> As for the second, there's a patch in the 2.6.34 kernel tree
>> that is dealing with it:
>>
>> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791
>>
>> It sounds like there may be a SRCREV problem for the board that
>> isn't picking up that change. Can you confirm that this commit
>> is in your board branch ?  You can check in your build directory
>> for linux.
> This commit is not in the crownbay-standard branch.

Argh. That explains it. You can always cherry pick / apply
it locally. This is intended to be a blanket fix, and
I just double checked and I for some reason *don't* see
it on that one branch either, which means it isn't a SRCREV
error hiding it.

I'm going to merge the patch out to the BSP branch now, but
you'd still need a SRCREV update to see the change in your
build.

Cheers,

Bruce

>
> cheers,
>
> Andre

Re: crownbay-noemgd poky-image-minimal fails to build

[Malcolm Crossley]

On 29/07/2011 15:02, Bruce Ashfield wrote:
> On 07/29/11 09:57, Malcolm Crossley wrote:
>> On 29/07/2011 14:12, Bruce Ashfield wrote:
>>> On 07/29/11 06:05, Andre Haupt wrote:
>>>> On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
>>>>> Hi all,
>>>>>
>>>>> I am trying to build a poky bernard image for crownbay-noemgd.
>>>>> For this i checked out the bernard branch of both poky and meta-intel
>>>>> from git.yoctoproject.org.
>>>>>
>>>>> Bitbake fails during the kernels compile_perf task complaining that
>>>>> it can not
>>>>> find libdw.h and bfd.h and that using /usr/local/include as include
>>>>> location is unsafe for cross compilation (full log attached).
>>>>>
>>>>> What do i miss here?
>>>>
>>>> I did work around this with
>>>>
>>>> diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>> b/meta/recipes-
>>>> index 3c1e669..85caa92 100644
>>>> --- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>> +++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>> @@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
>>>> addtask kernel_link_vmlinux after do_compile before do_install
>>>> addtask validate_branches before do_patch after do_kernel_checkout
>>>>
>>>> -require linux-tools.inc
>>>> +#require linux-tools.inc
>>>>
>>>>
>>>> not sure that this is the right thing to do though.
>>>
>>> It's an acceptable work around to keep you building on your
>>> local machine, assuming that you don't need perf. But the
>>> linux-yocto recipes always want to provide perf, and hence
>>> have that include.
>>>
>>> I'm trying to dust off my memory here. I know that this has
>>> been seen, and I also know that this built fine in the bernard
>>> release.
>>>
>>> The first part of the issue is the:
>>>
>>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>>> support. Please install elfutils-devel/elfutils-dev
>>>
>>> We may have a missing host dependency in the checks. Have you
>>> tried installing the relevant package for F13 ?
>>>
>>> As for the second, there's a patch in the 2.6.34 kernel tree
>>> that is dealing with it:
>>>
>>> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791 
>>>
>>>
>>>
>>> It sounds like there may be a SRCREV problem for the board that
>>> isn't picking up that change. Can you confirm that this commit
>>> is in your board branch ? You can check in your build directory
>>> for linux.
>>
>> I have found that stable branch 2.6.34 contains a bug when trying to
>> build the perf tools. I have a patch but I've not been able to upstream
>> it yet, I've copy pasted it inline here, hopefully it doesn't wrap too
>> badly:
>
> Just so I've got all the context here. This failure is
> on top of the one you were asking about ? (the unsafe
> / includes). And this is unique to the 2.6.34-stable
> perf variant (i.e. no other newer kernel release has
> the issue) ?
The patch is required on 2.6.34-stable but not on 2.6.34 vanilla. I have 
not tested newer kernels but I believe there would be some compliants if 
it was still broken. So I think there was some specific backporting 
breakage with 2.6.34-stable.  Without the patch I got this error on 
2.6.34.6:

NOTE: make -j 2 DESTDIR=/home/gefanuc/auto/main/build/work/ge-sbc612-angstrom-linux/linux-ge-2.6.x+22411-r0/image CC=powerpc-angstrom-linux-gcc  LD=powerpc-angstrom-linux-ld
Makefile:508: No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev
touch .perf.dev.null
     CC perf.o
     CC bench/sched-messaging.o
bench/sched-messaging.c:34: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'use_pipes'
bench/sched-messaging.c:36: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'thread_mode'
bench/sched-messaging.c: In function 'fdpair':
bench/sched-messaging.c:61: error: 'use_pipes' undeclared (first use in this function)
bench/sched-messaging.c:61: error: (Each undeclared identifier is reported only once
bench/sched-messaging.c:61: error: for each function it appears in.)
bench/sched-messaging.c: In function 'receiver':
bench/sched-messaging.c:120: error: 'thread_mode' undeclared (first use in this function)
bench/sched-messaging.c: In function 'create_worker':
bench/sched-messaging.c:149: error: 'thread_mode' undeclared (first use in this function)
bench/sched-messaging.c: In function 'reap_worker':
bench/sched-messaging.c:189: error: 'thread_mode' undeclared (first use in this function)
bench/sched-messaging.c: In function 'group':
bench/sched-messaging.c:232: error: 'thread_mode' undeclared (first use in this function)
bench/sched-messaging.c: At top level:
bench/sched-messaging.c:255: error: 'use_pipes' undeclared here (not in a function)
bench/sched-messaging.c:257: error: 'thread_mode' undeclared here (not in a function)
make: *** [bench/sched-messaging.o] Error 1
make: *** Waiting for unfinished jobs....

Regards

Malcolm


>
> with those answers, I can appropriately deal with it
> and vector it to the right places.
>
> Cheers,
>
> Bruce
>
>>
>> Author: Malcolm Crossley <malcolm.crossley@ge.com>
>> Date: Fri Jul 22 22:44:53 2011 +0100
>>
>> Kernel version 2.6.34.6. has a bug with regards to it's perf tool source
>> files. This patch adds a missing include directive.
>>
>> Signed-off-by: Malcolm Crossley <malcolm.crossley@ge.com>
>>
>> diff --git a/tools/perf/perf.h b/tools/perf/perf.h
>> index 6fb379b..3c497c5 100644
>> --- a/tools/perf/perf.h
>> +++ b/tools/perf/perf.h
>> @@ -73,6 +73,7 @@
>> #include <unistd.h>
>> #include <sys/types.h>
>> #include <sys/syscall.h>
>> +#include <stdbool.h>
>>
>> #include "../../include/linux/perf_event.h"
>> #include "util/types.h"
>>
>>
>> Regards
>>
>> Malcolm
>>
>>>
>>> Bruce
>>>
>>>>
>>>> cheers,
>>>>
>>>> Andre
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto@yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>

Re: crownbay-noemgd poky-image-minimal fails to build

[Bruce Ashfield]

On 07/29/11 10:09, Bruce Ashfield wrote:
> On 07/29/11 10:03, Andre Haupt wrote:
>> Hi Bruce,
>>
>> thanks for your comments. See below
>>
>> On Fri, Jul 29, 2011 at 09:12:22AM -0400, Bruce Ashfield wrote:
>>> I'm trying to dust off my memory here. I know that this has
>>> been seen, and I also know that this built fine in the bernard
>>> release.
>>>
>>> The first part of the issue is the:
>>>
>>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>>> support. Please install elfutils-devel/elfutils-dev
>>>
>>> We may have a missing host dependency in the checks. Have you
>>> tried installing the relevant package for F13 ?
>> I had elfutils-devel installed.
>>
>>> As for the second, there's a patch in the 2.6.34 kernel tree
>>> that is dealing with it:
>>>
>>> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791
>>>
>>>
>>> It sounds like there may be a SRCREV problem for the board that
>>> isn't picking up that change. Can you confirm that this commit
>>> is in your board branch ? You can check in your build directory
>>> for linux.
>> This commit is not in the crownbay-standard branch.
>
> Argh. That explains it. You can always cherry pick / apply
> it locally. This is intended to be a blanket fix, and
> I just double checked and I for some reason *don't* see
> it on that one branch either, which means it isn't a SRCREV
> error hiding it.
>
> I'm going to merge the patch out to the BSP branch now, but
> you'd still need a SRCREV update to see the change in your
> build.

I pushed out the change. If your SRCREV is 
a945cd4a4b27c8f9165f4064c8c60e4df569b4c5 for the
crownbay, you'll pickup the commit.

Bruce

>
> Cheers,
>
> Bruce
>
>>
>> cheers,
>>
>> Andre
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: crownbay-noemgd poky-image-minimal fails to build

[Bruce Ashfield]

On 07/29/11 10:11, Malcolm Crossley wrote:
> On 29/07/2011 15:02, Bruce Ashfield wrote:
>> On 07/29/11 09:57, Malcolm Crossley wrote:
>>> On 29/07/2011 14:12, Bruce Ashfield wrote:
>>>> On 07/29/11 06:05, Andre Haupt wrote:
>>>>> On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> I am trying to build a poky bernard image for crownbay-noemgd.
>>>>>> For this i checked out the bernard branch of both poky and meta-intel
>>>>>> from git.yoctoproject.org.
>>>>>>
>>>>>> Bitbake fails during the kernels compile_perf task complaining that
>>>>>> it can not
>>>>>> find libdw.h and bfd.h and that using /usr/local/include as include
>>>>>> location is unsafe for cross compilation (full log attached).
>>>>>>
>>>>>> What do i miss here?
>>>>>
>>>>> I did work around this with
>>>>>
>>>>> diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>> b/meta/recipes-
>>>>> index 3c1e669..85caa92 100644
>>>>> --- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>> +++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>> @@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
>>>>> addtask kernel_link_vmlinux after do_compile before do_install
>>>>> addtask validate_branches before do_patch after do_kernel_checkout
>>>>>
>>>>> -require linux-tools.inc
>>>>> +#require linux-tools.inc
>>>>>
>>>>>
>>>>> not sure that this is the right thing to do though.
>>>>
>>>> It's an acceptable work around to keep you building on your
>>>> local machine, assuming that you don't need perf. But the
>>>> linux-yocto recipes always want to provide perf, and hence
>>>> have that include.
>>>>
>>>> I'm trying to dust off my memory here. I know that this has
>>>> been seen, and I also know that this built fine in the bernard
>>>> release.
>>>>
>>>> The first part of the issue is the:
>>>>
>>>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>>>> support. Please install elfutils-devel/elfutils-dev
>>>>
>>>> We may have a missing host dependency in the checks. Have you
>>>> tried installing the relevant package for F13 ?
>>>>
>>>> As for the second, there's a patch in the 2.6.34 kernel tree
>>>> that is dealing with it:
>>>>
>>>> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791
>>>>
>>>>
>>>>
>>>> It sounds like there may be a SRCREV problem for the board that
>>>> isn't picking up that change. Can you confirm that this commit
>>>> is in your board branch ? You can check in your build directory
>>>> for linux.
>>>
>>> I have found that stable branch 2.6.34 contains a bug when trying to
>>> build the perf tools. I have a patch but I've not been able to upstream
>>> it yet, I've copy pasted it inline here, hopefully it doesn't wrap too
>>> badly:
>>
>> Just so I've got all the context here. This failure is
>> on top of the one you were asking about ? (the unsafe
>> / includes). And this is unique to the 2.6.34-stable
>> perf variant (i.e. no other newer kernel release has
>> the issue) ?
> The patch is required on 2.6.34-stable but not on 2.6.34 vanilla. I have
> not tested newer kernels but I believe there would be some compliants if
> it was still broken. So I think there was some specific backporting
> breakage with 2.6.34-stable. Without the patch I got this error on
> 2.6.34.6:

odd. Our autobuilders and local builds should have shown this,
since we are already past 2.6.34.6 for those boards.

We'll have to look into this one a bit more.

Bruce

>
> NOTE: make -j 2
> DESTDIR=/home/gefanuc/auto/main/build/work/ge-sbc612-angstrom-linux/linux-ge-2.6.x+22411-r0/image
> CC=powerpc-angstrom-linux-gcc LD=powerpc-angstrom-linux-ld
> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
> support. Please install elfutils-devel/elfutils-dev
> touch .perf.dev.null
> CC perf.o
> CC bench/sched-messaging.o
> bench/sched-messaging.c:34: error: expected '=', ',', ';', 'asm' or
> '__attribute__' before 'use_pipes'
> bench/sched-messaging.c:36: error: expected '=', ',', ';', 'asm' or
> '__attribute__' before 'thread_mode'
> bench/sched-messaging.c: In function 'fdpair':
> bench/sched-messaging.c:61: error: 'use_pipes' undeclared (first use in
> this function)
> bench/sched-messaging.c:61: error: (Each undeclared identifier is
> reported only once
> bench/sched-messaging.c:61: error: for each function it appears in.)
> bench/sched-messaging.c: In function 'receiver':
> bench/sched-messaging.c:120: error: 'thread_mode' undeclared (first use
> in this function)
> bench/sched-messaging.c: In function 'create_worker':
> bench/sched-messaging.c:149: error: 'thread_mode' undeclared (first use
> in this function)
> bench/sched-messaging.c: In function 'reap_worker':
> bench/sched-messaging.c:189: error: 'thread_mode' undeclared (first use
> in this function)
> bench/sched-messaging.c: In function 'group':
> bench/sched-messaging.c:232: error: 'thread_mode' undeclared (first use
> in this function)
> bench/sched-messaging.c: At top level:
> bench/sched-messaging.c:255: error: 'use_pipes' undeclared here (not in
> a function)
> bench/sched-messaging.c:257: error: 'thread_mode' undeclared here (not
> in a function)
> make: *** [bench/sched-messaging.o] Error 1
> make: *** Waiting for unfinished jobs....
>
> Regards
>
> Malcolm
>
>
>>
>> with those answers, I can appropriately deal with it
>> and vector it to the right places.
>>
>> Cheers,
>>
>> Bruce
>>
>>>
>>> Author: Malcolm Crossley <malcolm.crossley@ge.com>
>>> Date: Fri Jul 22 22:44:53 2011 +0100
>>>
>>> Kernel version 2.6.34.6. has a bug with regards to it's perf tool source
>>> files. This patch adds a missing include directive.
>>>
>>> Signed-off-by: Malcolm Crossley <malcolm.crossley@ge.com>
>>>
>>> diff --git a/tools/perf/perf.h b/tools/perf/perf.h
>>> index 6fb379b..3c497c5 100644
>>> --- a/tools/perf/perf.h
>>> +++ b/tools/perf/perf.h
>>> @@ -73,6 +73,7 @@
>>> #include <unistd.h>
>>> #include <sys/types.h>
>>> #include <sys/syscall.h>
>>> +#include <stdbool.h>
>>>
>>> #include "../../include/linux/perf_event.h"
>>> #include "util/types.h"
>>>
>>>
>>> Regards
>>>
>>> Malcolm
>>>
>>>>
>>>> Bruce
>>>>
>>>>>
>>>>> cheers,
>>>>>
>>>>> Andre
>>>>> _______________________________________________
>>>>> yocto mailing list
>>>>> yocto@yoctoproject.org
>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto@yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>

Re: crownbay-noemgd poky-image-minimal fails to build

[Malcolm Crossley]

On 29/07/2011 15:33, Bruce Ashfield wrote:
> On 07/29/11 10:11, Malcolm Crossley wrote:
>> On 29/07/2011 15:02, Bruce Ashfield wrote:
>>> On 07/29/11 09:57, Malcolm Crossley wrote:
>>>> On 29/07/2011 14:12, Bruce Ashfield wrote:
>>>>> On 07/29/11 06:05, Andre Haupt wrote:
>>>>>> On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I am trying to build a poky bernard image for crownbay-noemgd.
>>>>>>> For this i checked out the bernard branch of both poky and 
>>>>>>> meta-intel
>>>>>>> from git.yoctoproject.org.
>>>>>>>
>>>>>>> Bitbake fails during the kernels compile_perf task complaining that
>>>>>>> it can not
>>>>>>> find libdw.h and bfd.h and that using /usr/local/include as include
>>>>>>> location is unsafe for cross compilation (full log attached).
>>>>>>>
>>>>>>> What do i miss here?
>>>>>>
>>>>>> I did work around this with
>>>>>>
>>>>>> diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>>> b/meta/recipes-
>>>>>> index 3c1e669..85caa92 100644
>>>>>> --- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>>> +++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>>> @@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
>>>>>> addtask kernel_link_vmlinux after do_compile before do_install
>>>>>> addtask validate_branches before do_patch after do_kernel_checkout
>>>>>>
>>>>>> -require linux-tools.inc
>>>>>> +#require linux-tools.inc
>>>>>>
>>>>>>
>>>>>> not sure that this is the right thing to do though.
>>>>>
>>>>> It's an acceptable work around to keep you building on your
>>>>> local machine, assuming that you don't need perf. But the
>>>>> linux-yocto recipes always want to provide perf, and hence
>>>>> have that include.
>>>>>
>>>>> I'm trying to dust off my memory here. I know that this has
>>>>> been seen, and I also know that this built fine in the bernard
>>>>> release.
>>>>>
>>>>> The first part of the issue is the:
>>>>>
>>>>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>>>>> support. Please install elfutils-devel/elfutils-dev
>>>>>
>>>>> We may have a missing host dependency in the checks. Have you
>>>>> tried installing the relevant package for F13 ?
>>>>>
>>>>> As for the second, there's a patch in the 2.6.34 kernel tree
>>>>> that is dealing with it:
>>>>>
>>>>> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791 
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> It sounds like there may be a SRCREV problem for the board that
>>>>> isn't picking up that change. Can you confirm that this commit
>>>>> is in your board branch ? You can check in your build directory
>>>>> for linux.
>>>>
>>>> I have found that stable branch 2.6.34 contains a bug when trying to
>>>> build the perf tools. I have a patch but I've not been able to 
>>>> upstream
>>>> it yet, I've copy pasted it inline here, hopefully it doesn't wrap too
>>>> badly:
>>>
>>> Just so I've got all the context here. This failure is
>>> on top of the one you were asking about ? (the unsafe
>>> / includes). And this is unique to the 2.6.34-stable
>>> perf variant (i.e. no other newer kernel release has
>>> the issue) ?
>> The patch is required on 2.6.34-stable but not on 2.6.34 vanilla. I have
>> not tested newer kernels but I believe there would be some compliants if
>> it was still broken. So I think there was some specific backporting
>> breakage with 2.6.34-stable. Without the patch I got this error on
>> 2.6.34.6:
>
> odd. Our autobuilders and local builds should have shown this,
> since we are already past 2.6.34.6 for those boards.
>
> We'll have to look into this one a bit more.
>

I saw this problem using Openembedded stable 2009 branch, so yocto could 
be fine due to different environment setup. I was posting the patch in 
case it helped with this issue because it looked similar.

Regards

Malcolm
>
>>
>> NOTE: make -j 2
>> DESTDIR=/home/gefanuc/auto/main/build/work/ge-sbc612-angstrom-linux/linux-ge-2.6.x+22411-r0/image 
>>
>> CC=powerpc-angstrom-linux-gcc LD=powerpc-angstrom-linux-ld
>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>> support. Please install elfutils-devel/elfutils-dev
>> touch .perf.dev.null
>> CC perf.o
>> CC bench/sched-messaging.o
>> bench/sched-messaging.c:34: error: expected '=', ',', ';', 'asm' or
>> '__attribute__' before 'use_pipes'
>> bench/sched-messaging.c:36: error: expected '=', ',', ';', 'asm' or
>> '__attribute__' before 'thread_mode'
>> bench/sched-messaging.c: In function 'fdpair':
>> bench/sched-messaging.c:61: error: 'use_pipes' undeclared (first use in
>> this function)
>> bench/sched-messaging.c:61: error: (Each undeclared identifier is
>> reported only once
>> bench/sched-messaging.c:61: error: for each function it appears in.)
>> bench/sched-messaging.c: In function 'receiver':
>> bench/sched-messaging.c:120: error: 'thread_mode' undeclared (first use
>> in this function)
>> bench/sched-messaging.c: In function 'create_worker':
>> bench/sched-messaging.c:149: error: 'thread_mode' undeclared (first use
>> in this function)
>> bench/sched-messaging.c: In function 'reap_worker':
>> bench/sched-messaging.c:189: error: 'thread_mode' undeclared (first use
>> in this function)
>> bench/sched-messaging.c: In function 'group':
>> bench/sched-messaging.c:232: error: 'thread_mode' undeclared (first use
>> in this function)
>> bench/sched-messaging.c: At top level:
>> bench/sched-messaging.c:255: error: 'use_pipes' undeclared here (not in
>> a function)
>> bench/sched-messaging.c:257: error: 'thread_mode' undeclared here (not
>> in a function)
>> make: *** [bench/sched-messaging.o] Error 1
>> make: *** Waiting for unfinished jobs....
>>
>> Regards
>>
>> Malcolm
>>
>>
>>>
>>> with those answers, I can appropriately deal with it
>>> and vector it to the right places.
>>>
>>> Cheers,
>>>
>>> Bruce
>>>
>>>>
>>>> Author: Malcolm Crossley <malcolm.crossley@ge.com>
>>>> Date: Fri Jul 22 22:44:53 2011 +0100
>>>>
>>>> Kernel version 2.6.34.6. has a bug with regards to it's perf tool 
>>>> source
>>>> files. This patch adds a missing include directive.
>>>>
>>>> Signed-off-by: Malcolm Crossley <malcolm.crossley@ge.com>
>>>>
>>>> diff --git a/tools/perf/perf.h b/tools/perf/perf.h
>>>> index 6fb379b..3c497c5 100644
>>>> --- a/tools/perf/perf.h
>>>> +++ b/tools/perf/perf.h
>>>> @@ -73,6 +73,7 @@
>>>> #include <unistd.h>
>>>> #include <sys/types.h>
>>>> #include <sys/syscall.h>
>>>> +#include <stdbool.h>
>>>>
>>>> #include "../../include/linux/perf_event.h"
>>>> #include "util/types.h"
>>>>
>>>>
>>>> Regards
>>>>
>>>> Malcolm
>>>>
>>>>>
>>>>> Bruce
>>>>>
>>>>>>
>>>>>> cheers,
>>>>>>
>>>>>> Andre
>>>>>> _______________________________________________
>>>>>> yocto mailing list
>>>>>> yocto@yoctoproject.org
>>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>>
>>>>> _______________________________________________
>>>>> yocto mailing list
>>>>> yocto@yoctoproject.org
>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto@yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>

Re: crownbay-noemgd poky-image-minimal fails to build

[Bruce Ashfield]

On 07/29/11 10:51, Malcolm Crossley wrote:
> On 29/07/2011 15:33, Bruce Ashfield wrote:
>> On 07/29/11 10:11, Malcolm Crossley wrote:
>>> On 29/07/2011 15:02, Bruce Ashfield wrote:
>>>> On 07/29/11 09:57, Malcolm Crossley wrote:
>>>>> On 29/07/2011 14:12, Bruce Ashfield wrote:
>>>>>> On 07/29/11 06:05, Andre Haupt wrote:
>>>>>>> On Fri, Jul 29, 2011 at 09:23:59AM +0200, Andre Haupt wrote:
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> I am trying to build a poky bernard image for crownbay-noemgd.
>>>>>>>> For this i checked out the bernard branch of both poky and
>>>>>>>> meta-intel
>>>>>>>> from git.yoctoproject.org.
>>>>>>>>
>>>>>>>> Bitbake fails during the kernels compile_perf task complaining that
>>>>>>>> it can not
>>>>>>>> find libdw.h and bfd.h and that using /usr/local/include as include
>>>>>>>> location is unsafe for cross compilation (full log attached).
>>>>>>>>
>>>>>>>> What do i miss here?
>>>>>>>
>>>>>>> I did work around this with
>>>>>>>
>>>>>>> diff --git a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>>>> b/meta/recipes-
>>>>>>> index 3c1e669..85caa92 100644
>>>>>>> --- a/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>>>> +++ b/meta/recipes-kernel/linux/linux-yocto-stable_git.bb
>>>>>>> @@ -42,4 +42,4 @@ KERNEL_FEATURES=features/netfilter
>>>>>>> addtask kernel_link_vmlinux after do_compile before do_install
>>>>>>> addtask validate_branches before do_patch after do_kernel_checkout
>>>>>>>
>>>>>>> -require linux-tools.inc
>>>>>>> +#require linux-tools.inc
>>>>>>>
>>>>>>>
>>>>>>> not sure that this is the right thing to do though.
>>>>>>
>>>>>> It's an acceptable work around to keep you building on your
>>>>>> local machine, assuming that you don't need perf. But the
>>>>>> linux-yocto recipes always want to provide perf, and hence
>>>>>> have that include.
>>>>>>
>>>>>> I'm trying to dust off my memory here. I know that this has
>>>>>> been seen, and I also know that this built fine in the bernard
>>>>>> release.
>>>>>>
>>>>>> The first part of the issue is the:
>>>>>>
>>>>>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>>>>>> support. Please install elfutils-devel/elfutils-dev
>>>>>>
>>>>>> We may have a missing host dependency in the checks. Have you
>>>>>> tried installing the relevant package for F13 ?
>>>>>>
>>>>>> As for the second, there's a patch in the 2.6.34 kernel tree
>>>>>> that is dealing with it:
>>>>>>
>>>>>> http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> It sounds like there may be a SRCREV problem for the board that
>>>>>> isn't picking up that change. Can you confirm that this commit
>>>>>> is in your board branch ? You can check in your build directory
>>>>>> for linux.
>>>>>
>>>>> I have found that stable branch 2.6.34 contains a bug when trying to
>>>>> build the perf tools. I have a patch but I've not been able to
>>>>> upstream
>>>>> it yet, I've copy pasted it inline here, hopefully it doesn't wrap too
>>>>> badly:
>>>>
>>>> Just so I've got all the context here. This failure is
>>>> on top of the one you were asking about ? (the unsafe
>>>> / includes). And this is unique to the 2.6.34-stable
>>>> perf variant (i.e. no other newer kernel release has
>>>> the issue) ?
>>> The patch is required on 2.6.34-stable but not on 2.6.34 vanilla. I have
>>> not tested newer kernels but I believe there would be some compliants if
>>> it was still broken. So I think there was some specific backporting
>>> breakage with 2.6.34-stable. Without the patch I got this error on
>>> 2.6.34.6:
>>
>> odd. Our autobuilders and local builds should have shown this,
>> since we are already past 2.6.34.6 for those boards.
>>
>> We'll have to look into this one a bit more.
>>
>
> I saw this problem using Openembedded stable 2009 branch, so yocto could
> be fine due to different environment setup. I was posting the patch in
> case it helped with this issue because it looked similar.

No worries! thanks for the report and the post, I'm
going to keep this on my radar going forward.

Cheers,

Bruce

>
> Regards
>
> Malcolm
>>
>>>
>>> NOTE: make -j 2
>>> DESTDIR=/home/gefanuc/auto/main/build/work/ge-sbc612-angstrom-linux/linux-ge-2.6.x+22411-r0/image
>>>
>>> CC=powerpc-angstrom-linux-gcc LD=powerpc-angstrom-linux-ld
>>> Makefile:508: No libdw.h found or old libdw.h found, disables dwarf
>>> support. Please install elfutils-devel/elfutils-dev
>>> touch .perf.dev.null
>>> CC perf.o
>>> CC bench/sched-messaging.o
>>> bench/sched-messaging.c:34: error: expected '=', ',', ';', 'asm' or
>>> '__attribute__' before 'use_pipes'
>>> bench/sched-messaging.c:36: error: expected '=', ',', ';', 'asm' or
>>> '__attribute__' before 'thread_mode'
>>> bench/sched-messaging.c: In function 'fdpair':
>>> bench/sched-messaging.c:61: error: 'use_pipes' undeclared (first use in
>>> this function)
>>> bench/sched-messaging.c:61: error: (Each undeclared identifier is
>>> reported only once
>>> bench/sched-messaging.c:61: error: for each function it appears in.)
>>> bench/sched-messaging.c: In function 'receiver':
>>> bench/sched-messaging.c:120: error: 'thread_mode' undeclared (first use
>>> in this function)
>>> bench/sched-messaging.c: In function 'create_worker':
>>> bench/sched-messaging.c:149: error: 'thread_mode' undeclared (first use
>>> in this function)
>>> bench/sched-messaging.c: In function 'reap_worker':
>>> bench/sched-messaging.c:189: error: 'thread_mode' undeclared (first use
>>> in this function)
>>> bench/sched-messaging.c: In function 'group':
>>> bench/sched-messaging.c:232: error: 'thread_mode' undeclared (first use
>>> in this function)
>>> bench/sched-messaging.c: At top level:
>>> bench/sched-messaging.c:255: error: 'use_pipes' undeclared here (not in
>>> a function)
>>> bench/sched-messaging.c:257: error: 'thread_mode' undeclared here (not
>>> in a function)
>>> make: *** [bench/sched-messaging.o] Error 1
>>> make: *** Waiting for unfinished jobs....
>>>
>>> Regards
>>>
>>> Malcolm
>>>
>>>
>>>>
>>>> with those answers, I can appropriately deal with it
>>>> and vector it to the right places.
>>>>
>>>> Cheers,
>>>>
>>>> Bruce
>>>>
>>>>>
>>>>> Author: Malcolm Crossley <malcolm.crossley@ge.com>
>>>>> Date: Fri Jul 22 22:44:53 2011 +0100
>>>>>
>>>>> Kernel version 2.6.34.6. has a bug with regards to it's perf tool
>>>>> source
>>>>> files. This patch adds a missing include directive.
>>>>>
>>>>> Signed-off-by: Malcolm Crossley <malcolm.crossley@ge.com>
>>>>>
>>>>> diff --git a/tools/perf/perf.h b/tools/perf/perf.h
>>>>> index 6fb379b..3c497c5 100644
>>>>> --- a/tools/perf/perf.h
>>>>> +++ b/tools/perf/perf.h
>>>>> @@ -73,6 +73,7 @@
>>>>> #include <unistd.h>
>>>>> #include <sys/types.h>
>>>>> #include <sys/syscall.h>
>>>>> +#include <stdbool.h>
>>>>>
>>>>> #include "../../include/linux/perf_event.h"
>>>>> #include "util/types.h"
>>>>>
>>>>>
>>>>> Regards
>>>>>
>>>>> Malcolm
>>>>>
>>>>>>
>>>>>> Bruce
>>>>>>
>>>>>>>
>>>>>>> cheers,
>>>>>>>
>>>>>>> Andre
>>>>>>> _______________________________________________
>>>>>>> yocto mailing list
>>>>>>> yocto@yoctoproject.org
>>>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>>>
>>>>>> _______________________________________________
>>>>>> yocto mailing list
>>>>>> yocto@yoctoproject.org
>>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>>
>>>>> _______________________________________________
>>>>> yocto mailing list
>>>>> yocto@yoctoproject.org
>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>
>>
>

Re: crownbay-noemgd poky-image-minimal fails to build

[Andre Haupt]

On Fri, Jul 29, 2011 at 10:32:03AM -0400, Bruce Ashfield wrote:
> >>>As for the second, there's a patch in the 2.6.34 kernel tree
> >>>that is dealing with it:
> >>>
> >>>http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.34/commit/?h=standard&id=72ca49ab08b8eb475cec82a10049503602325791
> >>>
> >>>
> >>>It sounds like there may be a SRCREV problem for the board that
> >>>isn't picking up that change. Can you confirm that this commit
> >>>is in your board branch ? You can check in your build directory
> >>>for linux.
> >>This commit is not in the crownbay-standard branch.
> >
> >Argh. That explains it. You can always cherry pick / apply
> >it locally. This is intended to be a blanket fix, and
> >I just double checked and I for some reason *don't* see
> >it on that one branch either, which means it isn't a SRCREV
> >error hiding it.
> >
> >I'm going to merge the patch out to the BSP branch now, but
> >you'd still need a SRCREV update to see the change in your
> >build.
> 
> I pushed out the change. If your SRCREV is
> a945cd4a4b27c8f9165f4064c8c60e4df569b4c5 for the
> crownbay, you'll pickup the commit.

Thank you very much, Bruce. The patch is now picked up, and
the build runs successfully.

cheers,

Andre