From: Martyn Welch <martyn.welch@ge.com>
To: Manohar Vanga <manohar.vanga@cern.ch>
Cc: gregkh@suse.de, cota@braap.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/8] VME Driver Fixes
Date: Mon, 01 Aug 2011 15:29:52 +0100 [thread overview]
Message-ID: <4E36B860.3020805@ge.com> (raw)
In-Reply-To: <1312194053-32310-1-git-send-email-manohar.vanga@cern.ch>
On 01/08/11 11:20, Manohar Vanga wrote:
> A little background: I work at CERN in the device drivers section and
> we have a lot of VME crates we use in the accelerator controls. We have
> been using an in-house driver for some time now and want to slowly port
> our existing device drivers over to the kernel driver.
>
> This set of patches adds multiple changes to the VME driver that fix
> various issues, mostly dealing with the device driver model.
Please can you update the vme_api.txt document as well to fully reflect the
proposed changes.
Martyn
> Some of
> these are based on the changes made by Emilio G. Cota in a previous
> LKML thread at:
>
> https://lkml.org/lkml/2010/10/25/480
>
> Thanks and best regards,
> Manohar Vanga
>
> Emilio G. Cota (1):
> staging: vme: allow explicit assignment of bus numbers
>
> Manohar Vanga (7):
> staging: vme_user: change kmalloc+memset to kzalloc
> staging: vme: make [alloc|free]_consistent bridge specific
> staging: vme: keep track of registered buses
> staging: vme: add functions for bridge module refcounting
> staging: vme: rename *_slot_get to *_get_slot
> staging: vme: add struct vme_dev for VME devices
> staging: vme: make match() driver specific to improve non-VME64x
> support
>
> drivers/staging/vme/bridges/vme_ca91cx42.c | 54 ++++-
> drivers/staging/vme/bridges/vme_tsi148.c | 53 ++++-
> drivers/staging/vme/devices/vme_user.c | 63 ++++-
> drivers/staging/vme/devices/vme_user.h | 2 +-
> drivers/staging/vme/vme.c | 414 ++++++++++++++++------------
> drivers/staging/vme/vme.h | 56 +++-
> drivers/staging/vme/vme_api.txt | 2 +-
> drivers/staging/vme/vme_bridge.h | 19 +-
> 8 files changed, 435 insertions(+), 228 deletions(-)
>
--
Martyn Welch (Principal Software Engineer) | Registered in England and
GE Intelligent Platforms | Wales (3828642) at 100
T +44(0)127322748 | Barbirolli Square, Manchester,
E martyn.welch@ge.com | M2 3AB VAT:GB 927559189
next prev parent reply other threads:[~2011-08-01 14:30 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-01 10:20 [PATCH 0/8] VME Driver Fixes Manohar Vanga
2011-08-01 10:20 ` [PATCH 1/8] staging: vme_user: change kmalloc+memset to kzalloc Manohar Vanga
2011-08-01 10:52 ` Martyn Welch
2011-08-10 7:44 ` Martyn Welch
2011-08-01 10:20 ` [PATCH 2/8] staging: vme: allow explicit assignment of bus numbers Manohar Vanga
2011-08-01 11:10 ` Dan Carpenter
2011-08-01 12:12 ` Manohar Vanga
2011-08-01 13:06 ` Martyn Welch
2011-08-01 14:31 ` Manohar Vanga
2011-08-01 15:50 ` Martyn Welch
2011-08-02 11:54 ` Manohar Vanga
2011-08-02 14:57 ` Martyn Welch
2011-08-03 8:54 ` Martyn Welch
2011-08-04 9:16 ` Manohar Vanga
2011-08-01 10:20 ` [PATCH 3/8] staging: vme: make [alloc|free]_consistent bridge specific Manohar Vanga
2011-08-01 11:10 ` Dan Carpenter
2011-08-01 12:24 ` Manohar Vanga
2011-08-01 13:41 ` Martyn Welch
2011-08-01 13:40 ` Manohar Vanga
2011-08-01 14:00 ` Manohar Vanga
2011-08-01 14:05 ` Martyn Welch
2011-08-01 10:20 ` [PATCH 4/8] staging: vme: keep track of registered buses Manohar Vanga
2011-08-01 10:20 ` [PATCH 5/8] staging: vme: add functions for bridge module refcounting Manohar Vanga
2011-08-03 14:04 ` Martyn Welch
2011-08-03 14:06 ` Manohar Vanga
2011-08-03 15:23 ` Emilio G. Cota
2011-08-04 7:23 ` Martyn Welch
2011-08-04 16:34 ` Emilio G. Cota
2011-08-05 7:45 ` Martyn Welch
2011-08-05 9:04 ` Manohar Vanga
2011-08-05 9:24 ` Martyn Welch
2011-08-05 17:47 ` Emilio G. Cota
2011-08-08 8:01 ` Martyn Welch
2011-08-08 9:14 ` Emilio G. Cota
2011-08-08 9:42 ` Martyn Welch
[not found] ` <4E3FABDA.8080204@ge.com>
[not found] ` <20110808101140.GA21300@flamenco.cs.columbia.edu>
2011-08-08 11:06 ` Martyn Welch
2011-08-08 17:22 ` Emilio G. Cota
2011-08-08 18:04 ` Greg KH
2011-08-09 9:00 ` Martyn Welch
2011-08-09 19:19 ` Emilio G. Cota
2011-08-10 7:39 ` Martyn Welch
2011-08-10 9:15 ` Emilio G. Cota
2011-08-10 9:50 ` Martyn Welch
2011-08-10 18:35 ` Emilio G. Cota
2011-08-09 13:24 ` Manohar Vanga
2011-08-09 14:26 ` Martyn Welch
2011-08-09 14:35 ` Manohar Vanga
2011-08-09 15:05 ` Martyn Welch
2011-08-09 18:49 ` Emilio G. Cota
2011-08-10 6:52 ` Manohar Vanga
2011-08-01 10:20 ` [PATCH 6/8] staging: vme: rename *_slot_get to *_get_slot Manohar Vanga
2011-08-01 12:29 ` Martyn Welch
2011-08-01 12:31 ` Manohar Vanga
2011-08-09 15:18 ` Martyn Welch
2011-08-09 15:25 ` Greg KH
2011-08-09 15:32 ` Manohar Vanga
2011-08-01 10:20 ` [PATCH 7/8] staging: vme: add struct vme_dev for VME devices Manohar Vanga
2011-08-09 15:19 ` Martyn Welch
2011-08-01 10:20 ` [PATCH 8/8] staging: vme: make match() driver specific to improve non-VME64x support Manohar Vanga
2011-08-03 9:16 ` Martyn Welch
2011-08-03 12:18 ` Manohar Vanga
2011-08-01 14:29 ` Martyn Welch [this message]
2011-08-01 14:32 ` [PATCH 0/8] VME Driver Fixes Manohar Vanga
2011-08-23 22:07 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E36B860.3020805@ge.com \
--to=martyn.welch@ge.com \
--cc=cota@braap.org \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=manohar.vanga@cern.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.