* [PATCH 0/2] meta-intel: new fri2 BSP
@ 2011-08-03 4:05 tom.zanussi
2011-08-03 4:05 ` [PATCH 1/2] meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems tom.zanussi
2011-08-03 4:05 ` [PATCH 2/2] meta-fri2: add 3g and wifi features tom.zanussi
0 siblings, 2 replies; 5+ messages in thread
From: tom.zanussi @ 2011-08-03 4:05 UTC (permalink / raw)
To: yocto
From: Tom Zanussi <tom.zanussi@intel.com>
This is the initial version of a BSP for the Fish River Island II.
I don't actually have the hardware, but have successfully booted
a sato image with wired networking and vesa graphics on the closest
thing I have, the crownbay.
This BSP uses the 3.0 kernel - the fri2 kernel modifications were
originally pushed to linux-yocto-dev awhile ago, but the commit
history was lost in the move to 3.0. It's reproduced below,
for reference.
commit 77d659c45fe47ef9e7f65f5b460a18d80f8c8f20
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Tue Jul 12 18:25:21 2011 -0500
meta-fri2: use iwlagn feature
Make use of the Intel wireless support for the Intel 6205 ABGN.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
commit 0008c9c1a16f816302be76b3c67b695c8a0064bd
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Tue Jul 12 18:25:20 2011 -0500
meta: add mac80211 and iwlagn features
Add iwlagn feature (Intel Wirelss WiFi Next Gen AGN) and one of its
dependencies, mac80211, as a feature, since there are a bunch of
other
config items that have the same dependency and could use it.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
commit 451ce7990c1e4757f3316f247e9c4e52830bd7c4
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Sun Jul 10 11:26:06 2011 -0500
meta/fri2: create initial BSP infrastructure
Inital BSP infrastructure for Intel Fish River Island II.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
commit 115003b6882981b33ae6e763088fbfb9dd1c21b3
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Sun Jul 10 11:26:05 2011 -0500
meta/crownbay: remove eg20t.cfg and use new eg20t feature instead
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
commit baf6a74de2481d39beb29dc26674ddfd21467b0d
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Sun Jul 10 11:26:04 2011 -0500
meta: add eg20t feature
Option group for Intel Platform Controller Hub EG20T (Topcliff).
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
The following changes since commit 3be9957211e54669825d1d55bb73c68d3f3354d0:
Tom Zanussi (1):
meta-sugarbay: switch to linux-yocto 3.0 kernel
are available in the git repository at:
git://git.yoctoproject.org/meta-intel.git tzanussi/fri2.v1
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/log/?h=tzanussi/fri2.v1
Tom Zanussi (2):
meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems
meta-fri2: add 3g and wifi features
meta-fri2/COPYING.MIT | 17 ++++
meta-fri2/README | 83 ++++++++++++++++++++
meta-fri2/README.sources | 17 ++++
meta-fri2/conf/layer.conf | 10 +++
meta-fri2/conf/machine/fri2.conf | 36 +++++++++
.../formfactor/formfactor/fri2/machconfig | 3 +
.../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 +
.../recipes-core/tasks/task-core-tools.bbappend | 2 +
.../xserver-xf86-config/fri2/xorg.conf | 26 ++++++
.../xorg-xserver/xserver-xf86-config_0.1.bbappend | 3 +
.../recipes-kernel/linux/linux-yocto_3.0.bbappend | 6 ++
11 files changed, 206 insertions(+), 0 deletions(-)
create mode 100644 meta-fri2/COPYING.MIT
create mode 100644 meta-fri2/README
create mode 100644 meta-fri2/README.sources
create mode 100644 meta-fri2/binary/.gitignore
create mode 100644 meta-fri2/conf/layer.conf
create mode 100644 meta-fri2/conf/machine/fri2.conf
create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig
create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend
create mode 100644 meta-fri2/recipes-core/tasks/task-core-tools.bbappend
create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf
create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
create mode 100644 meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 1/2] meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems 2011-08-03 4:05 [PATCH 0/2] meta-intel: new fri2 BSP tom.zanussi @ 2011-08-03 4:05 ` tom.zanussi 2011-08-04 6:18 ` Darren Hart 2011-08-03 4:05 ` [PATCH 2/2] meta-fri2: add 3g and wifi features tom.zanussi 1 sibling, 1 reply; 5+ messages in thread From: tom.zanussi @ 2011-08-03 4:05 UTC (permalink / raw) To: yocto From: Tom Zanussi <tom.zanussi@intel.com> This layer provides support for E6XX + EG20T Intel systems. Currently it supports only vesa graphics, which will be upgraded shortly. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> --- meta-fri2/COPYING.MIT | 17 ++++ meta-fri2/README | 83 ++++++++++++++++++++ meta-fri2/README.sources | 17 ++++ meta-fri2/conf/layer.conf | 10 +++ meta-fri2/conf/machine/fri2.conf | 36 +++++++++ .../formfactor/formfactor/fri2/machconfig | 3 + .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 + .../recipes-core/tasks/task-core-tools.bbappend | 2 + .../xserver-xf86-config/fri2/xorg.conf | 26 ++++++ .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 3 + .../recipes-kernel/linux/linux-yocto_3.0.bbappend | 6 ++ 11 files changed, 206 insertions(+), 0 deletions(-) create mode 100644 meta-fri2/COPYING.MIT create mode 100644 meta-fri2/README create mode 100644 meta-fri2/README.sources create mode 100644 meta-fri2/binary/.gitignore create mode 100644 meta-fri2/conf/layer.conf create mode 100644 meta-fri2/conf/machine/fri2.conf create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend create mode 100644 meta-fri2/recipes-core/tasks/task-core-tools.bbappend create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend create mode 100644 meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend diff --git a/meta-fri2/COPYING.MIT b/meta-fri2/COPYING.MIT new file mode 100644 index 0000000..fb950dc --- /dev/null +++ b/meta-fri2/COPYING.MIT @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/meta-fri2/README b/meta-fri2/README new file mode 100644 index 0000000..7957a7f --- /dev/null +++ b/meta-fri2/README @@ -0,0 +1,83 @@ +This README file contains information on building the meta-fri2 BSP +layer, and booting the images contained in the /binary directory. +Please see the corresponding sections below for details. + + +Table of Contents +================= + + I. Special notes on the meta-fri2 BSP layer + II. Building the meta-fri2 BSP layer +III. Booting the images in /binary + + +II. Building the meta-fri2 BSP layer +========================================= + +In order to build an image with BSP support for a given release, you +need to download the corresponding BSP tarball from the 'Board Support +Package (BSP) Downloads' page of the Yocto Project website. + +Having done that, and assuming you extracted the BSP tarball contents +at the top-level of your yocto build tree, you can build a fri2 image +by adding the location of the meta-fri2 layer to bblayers.conf e.g.: + + yocto/meta-intel/meta-fri2 \ + +To enable the fri2 layer, add the fri2 MACHINE to local.conf: + + MACHINE ?= "fri2" + +You should then be able to build a fri2 image as such: + + $ source poky-init-build-env + $ bitbake poky-image-sato-live + +At the end of a successful build, you should have a live image that +you can boot from a USB flash drive (see instructions on how to do +that below, in the section 'Booting the images from /binary'). + +As an alternative to downloading the BSP tarball, you can also work +directly from the meta-intel git repository. For each BSP in the +'meta-intel' repository, there are multiple branches, one +corresponding to each major release starting with 'laverne' (0.90), in +addition to the latest code which tracks the current master. Instead +of extracting a BSP tarball at the top level of your yocto build tree, +you can equivalently check out the appropriate branch from the +meta-intel repository at the same location. + + +III. Booting the images in /binary +================================== + +This BSP contains bootable live images, which can be used to directly +boot Yocto off of a USB flash drive. + +Under Linux, insert a USB flash drive. Assuming the USB flash drive +takes device /dev/sdf, use dd to copy the live image to it. For +example: + +# dd if=poky-image-sato-live-fri2-20101207053738.hddimg of=/dev/sdf +# sync +# eject /dev/sdf + +This should give you a bootable USB flash device. Insert the device +into a bootable USB socket on the target, and power on. This should +result in a system booted to the Sato graphical desktop. + +If you want a terminal, use the arrows at the top of the UI to move to +different pages of available applications, one of which is named +'Terminal'. Clicking that should give you a root terminal. + +If you want to ssh into the system, you can use the root terminal to +ifconfig the IP address and use that to ssh in. The root password is +empty, so to log in type 'root' for the user name and hit 'Enter' at +the Password prompt: and you should be in. + +---- + +If you find you're getting corrupt images on the USB (it doesn't show +the syslinux boot: prompt, or the boot: prompt contains strange +characters), try doing this first: + +# dd if=/dev/zero of=/dev/sdf bs=1M count=512 diff --git a/meta-fri2/README.sources b/meta-fri2/README.sources new file mode 100644 index 0000000..5c8b5c7 --- /dev/null +++ b/meta-fri2/README.sources @@ -0,0 +1,17 @@ +The sources for the packages comprising the images shipped with this +BSP can be found at the following location: + +http://autobuilder.yoctoproject.org/sources/ + +The metadata used to generate the images shipped with this BSP, in +addition to the code contained in this BSP, can be found at the +following location: + +http://autobuilder.yoctoproject.org/downloads/yocto-1.0/poky-bernard-5.0.tar.bz2 + +The metadata used to generate the images shipped with this BSP, in +addition to the code contained in this BSP, can also be found at the +following locations: + +git://git.yoctoproject.org/poky.git +git://git.yoctoproject.org/meta-intel diff --git a/meta-fri2/binary/.gitignore b/meta-fri2/binary/.gitignore new file mode 100644 index 0000000..e69de29 diff --git a/meta-fri2/conf/layer.conf b/meta-fri2/conf/layer.conf new file mode 100644 index 0000000..b30e776 --- /dev/null +++ b/meta-fri2/conf/layer.conf @@ -0,0 +1,10 @@ +# We have a conf and classes directory, add to BBPATH +BBPATH := "${BBPATH}:${LAYERDIR}" + +# We have a recipes directory, add to BBFILES +BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \ + ${LAYERDIR}/recipes-*/*/*.bbappend" + +BBFILE_COLLECTIONS += "fri2" +BBFILE_PATTERN_fri2 := "^${LAYERDIR}/" +BBFILE_PRIORITY_fri2 = "6" diff --git a/meta-fri2/conf/machine/fri2.conf b/meta-fri2/conf/machine/fri2.conf new file mode 100644 index 0000000..61b102d --- /dev/null +++ b/meta-fri2/conf/machine/fri2.conf @@ -0,0 +1,36 @@ +#@TYPE: Machine +#@NAME: fri2 + +#@DESCRIPTION: Machine configuration for Fish River Island II systems +# i.e. E660 + EG20T + +include conf/machine/include/tune-atom.inc + +MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ + acpi serial usbgadget" + +KERNEL_IMAGETYPE = "bzImage" + +PREFERRED_PROVIDER_virtual/kernel = "linux-yocto" +PREFERRED_VERSION_linux-yocto = "3.0+git%" + +PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" +PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" +PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" +PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xf86-dri-lite" +PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xf86-dri-lite" +XSERVER ?= "xserver-xf86-dri-lite \ + xf86-input-mouse \ + xf86-input-keyboard \ + xf86-input-evdev \ + xf86-input-synaptics \ + xf86-video-vesa" + +SERIAL_CONSOLE = "115200 ttyS0" + +MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" + +IMAGE_FSTYPES ?= "ext3 cpio.gz live" + +GLIBC_ADDONS = "nptl" +GLIBC_EXTRA_OECONF = "--with-tls" diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig new file mode 100644 index 0000000..ffce012 --- /dev/null +++ b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig @@ -0,0 +1,3 @@ +# Assume a USB mouse and keyboard are connected +HAVE_TOUCHSCREEN=0 +HAVE_KEYBOARD=1 diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend b/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend new file mode 100644 index 0000000..54da0ff --- /dev/null +++ b/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend @@ -0,0 +1,3 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" + +PRINC = "1" diff --git a/meta-fri2/recipes-core/tasks/task-core-tools.bbappend b/meta-fri2/recipes-core/tasks/task-core-tools.bbappend new file mode 100644 index 0000000..5accb2e --- /dev/null +++ b/meta-fri2/recipes-core/tasks/task-core-tools.bbappend @@ -0,0 +1,2 @@ +RRECOMMENDS_task-core-tools-profile_append_fri2 = " systemtap" + diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf new file mode 100644 index 0000000..da4fc3c --- /dev/null +++ b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf @@ -0,0 +1,26 @@ +Section "Device" + Identifier "Generic VESA" + Driver "vesa" +EndSection + +Section "Monitor" + Identifier "Generic Monitor" + Option "DPMS" +EndSection + +Section "Screen" + Identifier "Default Screen" + Device "Generic VESA" + Monitor "Generic Monitor" + DefaultDepth 24 +EndSection + +Section "ServerLayout" + Identifier "Default Layout" + Screen "Default Screen" +EndSection + +Section "ServerFlags" + Option "DontZap" "0" + Option "AutoAddDevices" "False" +EndSection diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend new file mode 100644 index 0000000..4b8d0e6 --- /dev/null +++ b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend @@ -0,0 +1,3 @@ +THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}" +FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:" + diff --git a/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend new file mode 100644 index 0000000..e280488 --- /dev/null +++ b/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend @@ -0,0 +1,6 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" +COMPATIBLE_MACHINE_fri2 = "fri2" +KMACHINE_fri2 = "yocto/standard/fri2" + +SRCREV_machine_pn-linux-yocto_fri2 ?= "5e08aa8dd62d9035498227de16b9148ab89e17c5" +SRCREV_meta_pn-linux-yocto_fri2 ?= "fe8eac15e144a35a716cd32c9d2b296ecd5202ac" -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems 2011-08-03 4:05 ` [PATCH 1/2] meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems tom.zanussi @ 2011-08-04 6:18 ` Darren Hart 2011-08-04 14:31 ` Tom Zanussi 0 siblings, 1 reply; 5+ messages in thread From: Darren Hart @ 2011-08-04 6:18 UTC (permalink / raw) To: tom.zanussi; +Cc: yocto Hi Tom, A few thoughts below. These are all things I can pick up once I return as well if there is some urgency to get these in tree. -- Darren On 08/02/2011 09:05 PM, tom.zanussi@intel.com wrote: > From: Tom Zanussi <tom.zanussi@intel.com> > > This layer provides support for E6XX + EG20T Intel systems. > > Currently it supports only vesa graphics, which will be upgraded > shortly. > > Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> > --- > meta-fri2/COPYING.MIT | 17 ++++ > meta-fri2/README | 83 ++++++++++++++++++++ > meta-fri2/README.sources | 17 ++++ > meta-fri2/conf/layer.conf | 10 +++ > meta-fri2/conf/machine/fri2.conf | 36 +++++++++ > .../formfactor/formfactor/fri2/machconfig | 3 + > .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 + > .../recipes-core/tasks/task-core-tools.bbappend | 2 + > .../xserver-xf86-config/fri2/xorg.conf | 26 ++++++ > .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 3 + > .../recipes-kernel/linux/linux-yocto_3.0.bbappend | 6 ++ > 11 files changed, 206 insertions(+), 0 deletions(-) > create mode 100644 meta-fri2/COPYING.MIT > create mode 100644 meta-fri2/README > create mode 100644 meta-fri2/README.sources > create mode 100644 meta-fri2/binary/.gitignore > create mode 100644 meta-fri2/conf/layer.conf > create mode 100644 meta-fri2/conf/machine/fri2.conf > create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig > create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend > create mode 100644 meta-fri2/recipes-core/tasks/task-core-tools.bbappend > create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf > create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend > create mode 100644 meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend > > diff --git a/meta-fri2/COPYING.MIT b/meta-fri2/COPYING.MIT > new file mode 100644 > index 0000000..fb950dc > --- /dev/null > +++ b/meta-fri2/COPYING.MIT > @@ -0,0 +1,17 @@ > +Permission is hereby granted, free of charge, to any person obtaining a copy > +of this software and associated documentation files (the "Software"), to deal > +in the Software without restriction, including without limitation the rights > +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell > +copies of the Software, and to permit persons to whom the Software is > +furnished to do so, subject to the following conditions: > + > +The above copyright notice and this permission notice shall be included in > +all copies or substantial portions of the Software. > + > +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE > +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, > +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN > +THE SOFTWARE. > diff --git a/meta-fri2/README b/meta-fri2/README > new file mode 100644 > index 0000000..7957a7f > --- /dev/null > +++ b/meta-fri2/README > @@ -0,0 +1,83 @@ > +This README file contains information on building the meta-fri2 BSP > +layer, and booting the images contained in the /binary directory. > +Please see the corresponding sections below for details. > + > + > +Table of Contents > +================= > + > + I. Special notes on the meta-fri2 BSP layer > + II. Building the meta-fri2 BSP layer > +III. Booting the images in /binary > + > + > +II. Building the meta-fri2 BSP layer > +========================================= > + > +In order to build an image with BSP support for a given release, you > +need to download the corresponding BSP tarball from the 'Board Support > +Package (BSP) Downloads' page of the Yocto Project website. > + > +Having done that, and assuming you extracted the BSP tarball contents > +at the top-level of your yocto build tree, you can build a fri2 image > +by adding the location of the meta-fri2 layer to bblayers.conf e.g.: > + > + yocto/meta-intel/meta-fri2 \ > + > +To enable the fri2 layer, add the fri2 MACHINE to local.conf: > + > + MACHINE ?= "fri2" > + > +You should then be able to build a fri2 image as such: > + > + $ source poky-init-build-env > + $ bitbake poky-image-sato-live These should be corrected with their oe- and core- equivalents. Also, I presume the FSTYPE should include -live by default now as the other BSPs have been recently updated to do? > + > +At the end of a successful build, you should have a live image that > +you can boot from a USB flash drive (see instructions on how to do > +that below, in the section 'Booting the images from /binary'). > + > +As an alternative to downloading the BSP tarball, you can also work > +directly from the meta-intel git repository. For each BSP in the > +'meta-intel' repository, there are multiple branches, one > +corresponding to each major release starting with 'laverne' (0.90), in > +addition to the latest code which tracks the current master. Instead > +of extracting a BSP tarball at the top level of your yocto build tree, > +you can equivalently check out the appropriate branch from the > +meta-intel repository at the same location. Does it make sense to have this information here? Especially since laverne won't ever work for the fri2 as it's support starts with Linux 3.0? It's boiler plate I guess and we want the fri2 BSP to be self contained so it can be downloaded independently... but hrm... I'm thinking on this one... > + > + > +III. Booting the images in /binary > +================================== > + > +This BSP contains bootable live images, which can be used to directly > +boot Yocto off of a USB flash drive. > + > +Under Linux, insert a USB flash drive. Assuming the USB flash drive > +takes device /dev/sdf, use dd to copy the live image to it. For > +example: > + > +# dd if=poky-image-sato-live-fri2-20101207053738.hddimg of=/dev/sdf > +# sync > +# eject /dev/sdf > + core-image-... > +This should give you a bootable USB flash device. Insert the device > +into a bootable USB socket on the target, and power on. This should > +result in a system booted to the Sato graphical desktop. > + All this should be consolodated into a single place documenting the use of live images as well as common x86 boot preparation. > +If you want a terminal, use the arrows at the top of the UI to move to > +different pages of available applications, one of which is named > +'Terminal'. Clicking that should give you a root terminal. > + > +If you want to ssh into the system, you can use the root terminal to > +ifconfig the IP address and use that to ssh in. The root password is > +empty, so to log in type 'root' for the user name and hit 'Enter' at > +the Password prompt: and you should be in. > + > +---- > + > +If you find you're getting corrupt images on the USB (it doesn't show > +the syslinux boot: prompt, or the boot: prompt contains strange > +characters), try doing this first: > + > +# dd if=/dev/zero of=/dev/sdf bs=1M count=512 There is also the buggy bios requiring the usbzip format that is documented in the poky README.hardware (another argument for consolidation). > diff --git a/meta-fri2/README.sources b/meta-fri2/README.sources > new file mode 100644 > index 0000000..5c8b5c7 > --- /dev/null > +++ b/meta-fri2/README.sources > @@ -0,0 +1,17 @@ > +The sources for the packages comprising the images shipped with this > +BSP can be found at the following location: > + > +http://autobuilder.yoctoproject.org/sources/ > + > +The metadata used to generate the images shipped with this BSP, in > +addition to the code contained in this BSP, can be found at the > +following location: > + > +http://autobuilder.yoctoproject.org/downloads/yocto-1.0/poky-bernard-5.0.tar.bz2 > + > +The metadata used to generate the images shipped with this BSP, in > +addition to the code contained in this BSP, can also be found at the > +following locations: > + > +git://git.yoctoproject.org/poky.git > +git://git.yoctoproject.org/meta-intel > diff --git a/meta-fri2/binary/.gitignore b/meta-fri2/binary/.gitignore > new file mode 100644 > index 0000000..e69de29 > diff --git a/meta-fri2/conf/layer.conf b/meta-fri2/conf/layer.conf > new file mode 100644 > index 0000000..b30e776 > --- /dev/null > +++ b/meta-fri2/conf/layer.conf > @@ -0,0 +1,10 @@ > +# We have a conf and classes directory, add to BBPATH > +BBPATH := "${BBPATH}:${LAYERDIR}" > + > +# We have a recipes directory, add to BBFILES > +BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \ > + ${LAYERDIR}/recipes-*/*/*.bbappend" Will this have similar init-....sh script selection issues that you fixed for cownbay and grub? > + > +BBFILE_COLLECTIONS += "fri2" > +BBFILE_PATTERN_fri2 := "^${LAYERDIR}/" > +BBFILE_PRIORITY_fri2 = "6" > diff --git a/meta-fri2/conf/machine/fri2.conf b/meta-fri2/conf/machine/fri2.conf > new file mode 100644 > index 0000000..61b102d > --- /dev/null > +++ b/meta-fri2/conf/machine/fri2.conf > @@ -0,0 +1,36 @@ > +#@TYPE: Machine > +#@NAME: fri2 > + > +#@DESCRIPTION: Machine configuration for Fish River Island II systems > +# i.e. E660 + EG20T > + > +include conf/machine/include/tune-atom.inc > + > +MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ > + acpi serial usbgadget" > + > +KERNEL_IMAGETYPE = "bzImage" > + > +PREFERRED_PROVIDER_virtual/kernel = "linux-yocto" > +PREFERRED_VERSION_linux-yocto = "3.0+git%" > + > +PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" > +PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" > +PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" > +PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xf86-dri-lite" > +PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xf86-dri-lite" > +XSERVER ?= "xserver-xf86-dri-lite \ > + xf86-input-mouse \ > + xf86-input-keyboard \ > + xf86-input-evdev \ > + xf86-input-synaptics \ > + xf86-video-vesa" > + > +SERIAL_CONSOLE = "115200 ttyS0" > + > +MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" > + > +IMAGE_FSTYPES ?= "ext3 cpio.gz live" Ah, it's here, so we just don't need the -live in the image names used above. > + > +GLIBC_ADDONS = "nptl" > +GLIBC_EXTRA_OECONF = "--with-tls" > diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig > new file mode 100644 > index 0000000..ffce012 > --- /dev/null > +++ b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig > @@ -0,0 +1,3 @@ > +# Assume a USB mouse and keyboard are connected > +HAVE_TOUCHSCREEN=0 > +HAVE_KEYBOARD=1 > diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend b/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend > new file mode 100644 > index 0000000..54da0ff > --- /dev/null > +++ b/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend > @@ -0,0 +1,3 @@ > +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" > + > +PRINC = "1" > diff --git a/meta-fri2/recipes-core/tasks/task-core-tools.bbappend b/meta-fri2/recipes-core/tasks/task-core-tools.bbappend > new file mode 100644 > index 0000000..5accb2e > --- /dev/null > +++ b/meta-fri2/recipes-core/tasks/task-core-tools.bbappend > @@ -0,0 +1,2 @@ > +RRECOMMENDS_task-core-tools-profile_append_fri2 = " systemtap" > + > diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf > new file mode 100644 > index 0000000..da4fc3c > --- /dev/null > +++ b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf > @@ -0,0 +1,26 @@ > +Section "Device" > + Identifier "Generic VESA" > + Driver "vesa" > +EndSection > + > +Section "Monitor" > + Identifier "Generic Monitor" > + Option "DPMS" > +EndSection > + > +Section "Screen" > + Identifier "Default Screen" > + Device "Generic VESA" > + Monitor "Generic Monitor" > + DefaultDepth 24 > +EndSection > + > +Section "ServerLayout" > + Identifier "Default Layout" > + Screen "Default Screen" > +EndSection > + > +Section "ServerFlags" > + Option "DontZap" "0" > + Option "AutoAddDevices" "False" > +EndSection > diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend > new file mode 100644 > index 0000000..4b8d0e6 > --- /dev/null > +++ b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend > @@ -0,0 +1,3 @@ > +THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}" > +FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:" > + > diff --git a/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend > new file mode 100644 > index 0000000..e280488 > --- /dev/null > +++ b/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend > @@ -0,0 +1,6 @@ > +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" > +COMPATIBLE_MACHINE_fri2 = "fri2" > +KMACHINE_fri2 = "yocto/standard/fri2" > + > +SRCREV_machine_pn-linux-yocto_fri2 ?= "5e08aa8dd62d9035498227de16b9148ab89e17c5" > +SRCREV_meta_pn-linux-yocto_fri2 ?= "fe8eac15e144a35a716cd32c9d2b296ecd5202ac" -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems 2011-08-04 6:18 ` Darren Hart @ 2011-08-04 14:31 ` Tom Zanussi 0 siblings, 0 replies; 5+ messages in thread From: Tom Zanussi @ 2011-08-04 14:31 UTC (permalink / raw) To: Darren Hart; +Cc: yocto@yoctoproject.org On Wed, 2011-08-03 at 23:18 -0700, Darren Hart wrote: > Hi Tom, > > A few thoughts below. These are all things I can pick up once I return > as well if there is some urgency to get these in tree. > Hi Darren, Thanks for your comments. I've already pulled this in as I didn't think you'd be getting to it this week. Comments below... > -- > Darren > > On 08/02/2011 09:05 PM, tom.zanussi@intel.com wrote: > > From: Tom Zanussi <tom.zanussi@intel.com> > > > > This layer provides support for E6XX + EG20T Intel systems. > > > > Currently it supports only vesa graphics, which will be upgraded > > shortly. > > > > Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> > > --- > > meta-fri2/COPYING.MIT | 17 ++++ > > meta-fri2/README | 83 ++++++++++++++++++++ > > meta-fri2/README.sources | 17 ++++ > > meta-fri2/conf/layer.conf | 10 +++ > > meta-fri2/conf/machine/fri2.conf | 36 +++++++++ > > .../formfactor/formfactor/fri2/machconfig | 3 + > > .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 + > > .../recipes-core/tasks/task-core-tools.bbappend | 2 + > > .../xserver-xf86-config/fri2/xorg.conf | 26 ++++++ > > .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 3 + > > .../recipes-kernel/linux/linux-yocto_3.0.bbappend | 6 ++ > > 11 files changed, 206 insertions(+), 0 deletions(-) > > create mode 100644 meta-fri2/COPYING.MIT > > create mode 100644 meta-fri2/README > > create mode 100644 meta-fri2/README.sources > > create mode 100644 meta-fri2/binary/.gitignore > > create mode 100644 meta-fri2/conf/layer.conf > > create mode 100644 meta-fri2/conf/machine/fri2.conf > > create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig > > create mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend > > create mode 100644 meta-fri2/recipes-core/tasks/task-core-tools.bbappend > > create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf > > create mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend > > create mode 100644 meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend > > > > diff --git a/meta-fri2/COPYING.MIT b/meta-fri2/COPYING.MIT > > new file mode 100644 > > index 0000000..fb950dc > > --- /dev/null > > +++ b/meta-fri2/COPYING.MIT > > @@ -0,0 +1,17 @@ > > +Permission is hereby granted, free of charge, to any person obtaining a copy > > +of this software and associated documentation files (the "Software"), to deal > > +in the Software without restriction, including without limitation the rights > > +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell > > +copies of the Software, and to permit persons to whom the Software is > > +furnished to do so, subject to the following conditions: > > + > > +The above copyright notice and this permission notice shall be included in > > +all copies or substantial portions of the Software. > > + > > +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > > +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > > +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE > > +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > > +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, > > +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN > > +THE SOFTWARE. > > diff --git a/meta-fri2/README b/meta-fri2/README > > new file mode 100644 > > index 0000000..7957a7f > > --- /dev/null > > +++ b/meta-fri2/README > > @@ -0,0 +1,83 @@ > > +This README file contains information on building the meta-fri2 BSP > > +layer, and booting the images contained in the /binary directory. > > +Please see the corresponding sections below for details. > > + > > + > > +Table of Contents > > +================= > > + > > + I. Special notes on the meta-fri2 BSP layer > > + II. Building the meta-fri2 BSP layer > > +III. Booting the images in /binary > > + > > + > > +II. Building the meta-fri2 BSP layer > > +========================================= > > + > > +In order to build an image with BSP support for a given release, you > > +need to download the corresponding BSP tarball from the 'Board Support > > +Package (BSP) Downloads' page of the Yocto Project website. > > + > > +Having done that, and assuming you extracted the BSP tarball contents > > +at the top-level of your yocto build tree, you can build a fri2 image > > +by adding the location of the meta-fri2 layer to bblayers.conf e.g.: > > + > > + yocto/meta-intel/meta-fri2 \ > > + > > +To enable the fri2 layer, add the fri2 MACHINE to local.conf: > > + > > + MACHINE ?= "fri2" > > + > > +You should then be able to build a fri2 image as such: > > + > > + $ source poky-init-build-env > > + $ bitbake poky-image-sato-live > > > These should be corrected with their oe- and core- equivalents. > > Also, I presume the FSTYPE should include -live by default now as the > other BSPs have been recently updated to do? > Good point - all the BSPs need to have their READMEs updated to reflect the new changes, both the -core and -live changes - it's on my todo list. > > + > > +At the end of a successful build, you should have a live image that > > +you can boot from a USB flash drive (see instructions on how to do > > +that below, in the section 'Booting the images from /binary'). > > + > > +As an alternative to downloading the BSP tarball, you can also work > > +directly from the meta-intel git repository. For each BSP in the > > +'meta-intel' repository, there are multiple branches, one > > +corresponding to each major release starting with 'laverne' (0.90), in > > +addition to the latest code which tracks the current master. Instead > > +of extracting a BSP tarball at the top level of your yocto build tree, > > +you can equivalently check out the appropriate branch from the > > +meta-intel repository at the same location. > > > Does it make sense to have this information here? Especially since > laverne won't ever work for the fri2 as it's support starts with Linux > 3.0? It's boiler plate I guess and we want the fri2 BSP to be self > contained so it can be downloaded independently... but hrm... I'm > thinking on this one... > Yeah, it is boilerplate - I'd love to get rid of anything boilerplate in these READMEs and just point to a single easily-maintainable URL on the Yocto site, for instance, but that conflicts with the 'self-contained' requirement' I guess we should change this particular mention of laverne to make it clear that it's not meant to be taken literally for this particlar BSP, but that in general we have branches for each release, and that some BSPs have not been there from the beginning. > > > + > > + > > +III. Booting the images in /binary > > +================================== > > + > > +This BSP contains bootable live images, which can be used to directly > > +boot Yocto off of a USB flash drive. > > + > > +Under Linux, insert a USB flash drive. Assuming the USB flash drive > > +takes device /dev/sdf, use dd to copy the live image to it. For > > +example: > > + > > +# dd if=poky-image-sato-live-fri2-20101207053738.hddimg of=/dev/sdf > > +# sync > > +# eject /dev/sdf > > + > > core-image-... > > > +This should give you a bootable USB flash device. Insert the device > > +into a bootable USB socket on the target, and power on. This should > > +result in a system booted to the Sato graphical desktop. > > + > > > All this should be consolodated into a single place documenting the use > of live images as well as common x86 boot preparation. > Seems like this would be a good candidate for a URL to a section on the website containing expanded documentation on the use of live images and common x86 boot preparation. Or we could just stick it in the README (or have it generated into the README). Whatever makes sense - the README was meant to be a minimalistic kind of quickstart for building and booting the BSP, but I don't see a problem with expanding it to make it more generally useful (within reason). > > > +If you want a terminal, use the arrows at the top of the UI to move to > > +different pages of available applications, one of which is named > > +'Terminal'. Clicking that should give you a root terminal. > > + > > +If you want to ssh into the system, you can use the root terminal to > > +ifconfig the IP address and use that to ssh in. The root password is > > +empty, so to log in type 'root' for the user name and hit 'Enter' at > > +the Password prompt: and you should be in. > > + > > +---- > > + > > +If you find you're getting corrupt images on the USB (it doesn't show > > +the syslinux boot: prompt, or the boot: prompt contains strange > > +characters), try doing this first: > > + > > +# dd if=/dev/zero of=/dev/sdf bs=1M count=512 > > > There is also the buggy bios requiring the usbzip format that is > documented in the poky README.hardware (another argument for consolidation). > Hmm, yeah, this is starting to sound like the discussion we had awhile back about getting rid of README.hardware and sticking that info in the BSP READMEs. It sounds like we need to have that discussion again, but I don't think this BSP submission is the right place for it. > > > diff --git a/meta-fri2/README.sources b/meta-fri2/README.sources > > new file mode 100644 > > index 0000000..5c8b5c7 > > --- /dev/null > > +++ b/meta-fri2/README.sources > > @@ -0,0 +1,17 @@ > > +The sources for the packages comprising the images shipped with this > > +BSP can be found at the following location: > > + > > +http://autobuilder.yoctoproject.org/sources/ > > + > > +The metadata used to generate the images shipped with this BSP, in > > +addition to the code contained in this BSP, can be found at the > > +following location: > > + > > +http://autobuilder.yoctoproject.org/downloads/yocto-1.0/poky-bernard-5.0.tar.bz2 > > + > > +The metadata used to generate the images shipped with this BSP, in > > +addition to the code contained in this BSP, can also be found at the > > +following locations: > > + > > +git://git.yoctoproject.org/poky.git > > +git://git.yoctoproject.org/meta-intel > > diff --git a/meta-fri2/binary/.gitignore b/meta-fri2/binary/.gitignore > > new file mode 100644 > > index 0000000..e69de29 > > diff --git a/meta-fri2/conf/layer.conf b/meta-fri2/conf/layer.conf > > new file mode 100644 > > index 0000000..b30e776 > > --- /dev/null > > +++ b/meta-fri2/conf/layer.conf > > @@ -0,0 +1,10 @@ > > +# We have a conf and classes directory, add to BBPATH > > +BBPATH := "${BBPATH}:${LAYERDIR}" > > + > > +# We have a recipes directory, add to BBFILES > > +BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \ > > + ${LAYERDIR}/recipes-*/*/*.bbappend" > > > Will this have similar init-....sh script selection issues that you > fixed for cownbay and grub? > Not as it stands now - the reason for that problem was that we added all of common* to BBFILES and it picked up things we didn't need. In the case of the crownbay, all it needed was the stuff in graphics (because EMGD needs older versions of some graphics recipes), not the other stuff in there that it inadvertently picked up. For the fri2+emgd, we will probably have the same problem, and will also need to add paths more carefully. Thanks, Tom > > > + > > +BBFILE_COLLECTIONS += "fri2" > > +BBFILE_PATTERN_fri2 := "^${LAYERDIR}/" > > +BBFILE_PRIORITY_fri2 = "6" > > diff --git a/meta-fri2/conf/machine/fri2.conf b/meta-fri2/conf/machine/fri2.conf > > new file mode 100644 > > index 0000000..61b102d > > --- /dev/null > > +++ b/meta-fri2/conf/machine/fri2.conf > > @@ -0,0 +1,36 @@ > > +#@TYPE: Machine > > +#@NAME: fri2 > > + > > +#@DESCRIPTION: Machine configuration for Fish River Island II systems > > +# i.e. E660 + EG20T > > + > > +include conf/machine/include/tune-atom.inc > > + > > +MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ > > + acpi serial usbgadget" > > + > > +KERNEL_IMAGETYPE = "bzImage" > > + > > +PREFERRED_PROVIDER_virtual/kernel = "linux-yocto" > > +PREFERRED_VERSION_linux-yocto = "3.0+git%" > > + > > +PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" > > +PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" > > +PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" > > +PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xf86-dri-lite" > > +PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xf86-dri-lite" > > +XSERVER ?= "xserver-xf86-dri-lite \ > > + xf86-input-mouse \ > > + xf86-input-keyboard \ > > + xf86-input-evdev \ > > + xf86-input-synaptics \ > > + xf86-video-vesa" > > + > > +SERIAL_CONSOLE = "115200 ttyS0" > > + > > +MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" > > + > > +IMAGE_FSTYPES ?= "ext3 cpio.gz live" > > > Ah, it's here, so we just don't need the -live in the image names used > above. > > > > + > > +GLIBC_ADDONS = "nptl" > > +GLIBC_EXTRA_OECONF = "--with-tls" > > diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig > > new file mode 100644 > > index 0000000..ffce012 > > --- /dev/null > > +++ b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig > > @@ -0,0 +1,3 @@ > > +# Assume a USB mouse and keyboard are connected > > +HAVE_TOUCHSCREEN=0 > > +HAVE_KEYBOARD=1 > > diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend b/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend > > new file mode 100644 > > index 0000000..54da0ff > > --- /dev/null > > +++ b/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend > > @@ -0,0 +1,3 @@ > > +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" > > + > > +PRINC = "1" > > diff --git a/meta-fri2/recipes-core/tasks/task-core-tools.bbappend b/meta-fri2/recipes-core/tasks/task-core-tools.bbappend > > new file mode 100644 > > index 0000000..5accb2e > > --- /dev/null > > +++ b/meta-fri2/recipes-core/tasks/task-core-tools.bbappend > > @@ -0,0 +1,2 @@ > > +RRECOMMENDS_task-core-tools-profile_append_fri2 = " systemtap" > > + > > diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf > > new file mode 100644 > > index 0000000..da4fc3c > > --- /dev/null > > +++ b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf > > @@ -0,0 +1,26 @@ > > +Section "Device" > > + Identifier "Generic VESA" > > + Driver "vesa" > > +EndSection > > + > > +Section "Monitor" > > + Identifier "Generic Monitor" > > + Option "DPMS" > > +EndSection > > + > > +Section "Screen" > > + Identifier "Default Screen" > > + Device "Generic VESA" > > + Monitor "Generic Monitor" > > + DefaultDepth 24 > > +EndSection > > + > > +Section "ServerLayout" > > + Identifier "Default Layout" > > + Screen "Default Screen" > > +EndSection > > + > > +Section "ServerFlags" > > + Option "DontZap" "0" > > + Option "AutoAddDevices" "False" > > +EndSection > > diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend > > new file mode 100644 > > index 0000000..4b8d0e6 > > --- /dev/null > > +++ b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend > > @@ -0,0 +1,3 @@ > > +THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}" > > +FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:" > > + > > diff --git a/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend > > new file mode 100644 > > index 0000000..e280488 > > --- /dev/null > > +++ b/meta-fri2/recipes-kernel/linux/linux-yocto_3.0.bbappend > > @@ -0,0 +1,6 @@ > > +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" > > +COMPATIBLE_MACHINE_fri2 = "fri2" > > +KMACHINE_fri2 = "yocto/standard/fri2" > > + > > +SRCREV_machine_pn-linux-yocto_fri2 ?= "5e08aa8dd62d9035498227de16b9148ab89e17c5" > > +SRCREV_meta_pn-linux-yocto_fri2 ?= "fe8eac15e144a35a716cd32c9d2b296ecd5202ac" > > -- > Darren Hart > Intel Open Source Technology Center > Yocto Project - Linux Kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] meta-fri2: add 3g and wifi features 2011-08-03 4:05 [PATCH 0/2] meta-intel: new fri2 BSP tom.zanussi 2011-08-03 4:05 ` [PATCH 1/2] meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems tom.zanussi @ 2011-08-03 4:05 ` tom.zanussi 1 sibling, 0 replies; 5+ messages in thread From: tom.zanussi @ 2011-08-03 4:05 UTC (permalink / raw) To: yocto From: Tom Zanussi <tom.zanussi@intel.com> Make sure the 3g and wifi bits get added. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> --- meta-fri2/conf/machine/fri2.conf | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/meta-fri2/conf/machine/fri2.conf b/meta-fri2/conf/machine/fri2.conf index 61b102d..6b25a51 100644 --- a/meta-fri2/conf/machine/fri2.conf +++ b/meta-fri2/conf/machine/fri2.conf @@ -7,7 +7,7 @@ include conf/machine/include/tune-atom.inc MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" + acpi serial usbgadget wifi 3g" KERNEL_IMAGETYPE = "bzImage" -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-08-04 14:32 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-08-03 4:05 [PATCH 0/2] meta-intel: new fri2 BSP tom.zanussi 2011-08-03 4:05 ` [PATCH 1/2] meta-fri2: new layer for Fish River Island II (E6XX/EG20T) systems tom.zanussi 2011-08-04 6:18 ` Darren Hart 2011-08-04 14:31 ` Tom Zanussi 2011-08-03 4:05 ` [PATCH 2/2] meta-fri2: add 3g and wifi features tom.zanussi
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.