* Adding X to image
@ 2011-08-25 19:07 Chris Tapp
2011-08-25 19:15 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: Chris Tapp @ 2011-08-25 19:07 UTC (permalink / raw)
To: yocto
What do I need to add where to get 'X' in to my image?
I've built poky-image-base (under 4.0.1) and things like xinit have
been built and are in the tmp/work tree.
What do I need to add so that xinit (and dependencies) are added to
the image? Should I be building a different image?
Chris Tapp
opensource@keylevel.com
www.keylevel.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Adding X to image
2011-08-25 19:07 Adding X to image Chris Tapp
@ 2011-08-25 19:15 ` Gary Thomas
2011-08-25 19:33 ` Chris Tapp
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2011-08-25 19:15 UTC (permalink / raw)
To: Chris Tapp; +Cc: yocto
On 2011-08-25 13:07, Chris Tapp wrote:
> What do I need to add where to get 'X' in to my image?
>
> I've built poky-image-base (under 4.0.1) and things like xinit have been built and are in the tmp/work tree.
>
> What do I need to add so that xinit (and dependencies) are added to the image? Should I be building a different image?
Try core-image-sato - it has a full-up X [matchbox based] X desktop
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Adding X to image
2011-08-25 19:15 ` Gary Thomas
@ 2011-08-25 19:33 ` Chris Tapp
2011-08-25 19:36 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: Chris Tapp @ 2011-08-25 19:33 UTC (permalink / raw)
To: Gary Thomas; +Cc: yocto
On 25 Aug 2011, at 20:15, Gary Thomas wrote:
> On 2011-08-25 13:07, Chris Tapp wrote:
>> What do I need to add where to get 'X' in to my image?
>>
>> I've built poky-image-base (under 4.0.1) and things like xinit have
>> been built and are in the tmp/work tree.
>>
>> What do I need to add so that xinit (and dependencies) are added to
>> the image? Should I be building a different image?
>
> Try core-image-sato - it has a full-up X [matchbox based] X desktop
Thanks Gary,
I can't find that one, bit I'm trying task-poky-x11-sato...
Chris Tapp
opensource@keylevel.com
www.keylevel.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Adding X to image
2011-08-25 19:33 ` Chris Tapp
@ 2011-08-25 19:36 ` Gary Thomas
2011-08-25 19:43 ` Chris Tapp
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2011-08-25 19:36 UTC (permalink / raw)
To: Chris Tapp; +Cc: yocto
On 2011-08-25 13:33, Chris Tapp wrote:
> On 25 Aug 2011, at 20:15, Gary Thomas wrote:
>
>> On 2011-08-25 13:07, Chris Tapp wrote:
>>> What do I need to add where to get 'X' in to my image?
>>>
>>> I've built poky-image-base (under 4.0.1) and things like xinit have been built and are in the tmp/work tree.
>>>
>>> What do I need to add so that xinit (and dependencies) are added to the image? Should I be building a different image?
>>
>> Try core-image-sato - it has a full-up X [matchbox based] X desktop
>
> Thanks Gary,
>
> I can't find that one, bit I'm trying task-poky-x11-sato...
If you're not using the bleeding-edge-master, it might be named poky-image-sato
task-poky-x11-sato is just a collection of packages needed for X. It won't
build a final root file system.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Adding X to image
2011-08-25 19:36 ` Gary Thomas
@ 2011-08-25 19:43 ` Chris Tapp
0 siblings, 0 replies; 5+ messages in thread
From: Chris Tapp @ 2011-08-25 19:43 UTC (permalink / raw)
To: Gary Thomas; +Cc: yocto
On 25 Aug 2011, at 20:36, Gary Thomas wrote:
> On 2011-08-25 13:33, Chris Tapp wrote:
>> On 25 Aug 2011, at 20:15, Gary Thomas wrote:
>>
>>> On 2011-08-25 13:07, Chris Tapp wrote:
>>>> What do I need to add where to get 'X' in to my image?
>>>>
>>>> I've built poky-image-base (under 4.0.1) and things like xinit
>>>> have been built and are in the tmp/work tree.
>>>>
>>>> What do I need to add so that xinit (and dependencies) are added
>>>> to the image? Should I be building a different image?
>>>
>>> Try core-image-sato - it has a full-up X [matchbox based] X desktop
>>
>> Thanks Gary,
>>
>> I can't find that one, bit I'm trying task-poky-x11-sato...
>
> If you're not using the bleeding-edge-master, it might be named poky-
> image-sato
>
> task-poky-x11-sato is just a collection of packages needed for X.
> It won't
> build a final root file system.
Sure. I should have mentioned that I will add this to my project
image ;-)
However, poky-image-sato sounds like it's worth a try first. Building...
Chris Tapp
opensource@keylevel.com
www.keylevel.com
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-08-25 19:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-08-25 19:07 Adding X to image Chris Tapp
2011-08-25 19:15 ` Gary Thomas
2011-08-25 19:33 ` Chris Tapp
2011-08-25 19:36 ` Gary Thomas
2011-08-25 19:43 ` Chris Tapp
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.