From: Santosh <santosh.shilimkar@ti.com>
To: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Cc: linux-omap@vger.kernel.org, khilman@ti.com, tony@atomide.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v14 REPOST 12/12] OMAP: dmtimer: Off mode support
Date: Fri, 26 Aug 2011 21:34:33 +0530 [thread overview]
Message-ID: <4E57C411.3050906@ti.com> (raw)
In-Reply-To: <1310731501-13078-13-git-send-email-tarun.kanti@ti.com>
On Friday 15 July 2011 05:35 PM, Tarun Kanti DebBarma wrote:
> Clock is enabled only when timer is started and disabled when the the timer
> is stopped. Therefore before accessing registers in functions clock is enabled
> and then disabled back at the end of access.
> Context save and restore functions are called as needed based upon whether the
> context is lost or not.
>
> Signed-off-by: Tarun Kanti DebBarma<tarun.kanti@ti.com>
> ---
> arch/arm/mach-omap2/timer.c | 17 +++++
> arch/arm/plat-omap/dmtimer.c | 97 +++++++++++++++++++++++++++--
> arch/arm/plat-omap/include/plat/dmtimer.h | 9 +++
> 3 files changed, 118 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index 9d47300..d1c6219 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -44,6 +44,9 @@
> #include<plat/common.h>
> #include<plat/omap_hwmod.h>
> #include<plat/omap_device.h>
> +#include<plat/omap-pm.h>
> +
> +#include "powerdomain.h"
>
> /* Parent clocks, eventually these will come from the clock framework */
>
> @@ -409,6 +412,16 @@ static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
> return ret;
> }
>
> +#ifdef CONFIG_PM
> +static int omap_timer_get_context_loss(struct device *dev)
> +{
> + return omap_pm_get_dev_context_loss_count(dev);
> +}
> +
> +#else
> +#define omap_gpio_get_context_loss NULL
> +#endif
> +
> struct omap_device_pm_latency omap2_dmtimer_latency[] = {
> {
> .deactivate_func = omap_device_idle_hwmods,
> @@ -437,6 +450,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
> struct dmtimer_platform_data *pdata;
> struct omap_device *od;
> struct omap_timer_capability_dev_attr *timer_dev_attr;
> + struct powerdomain *pwrdm;
>
> pr_debug("%s: %s\n", __func__, oh->name);
>
> @@ -466,6 +480,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
>
> pdata->set_timer_src = omap2_dm_timer_set_src;
> pdata->timer_ip_type = oh->class->rev;
> + pwrdm = omap_hwmod_get_pwrdm(oh);
> + pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
> + pdata->get_context_loss_count = omap_timer_get_context_loss;
>
> od = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
> omap2_dmtimer_latency,
> diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
> index cdef48b..db14d7f 100644
> --- a/arch/arm/plat-omap/dmtimer.c
> +++ b/arch/arm/plat-omap/dmtimer.c
> @@ -151,12 +151,14 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
>
> static void omap_dm_timer_reset(struct omap_dm_timer *timer)
> {
> + omap_dm_timer_enable(timer);
> if (timer->pdev->id != 1) {
> omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
> omap_dm_timer_wait_for_reset(timer);
> }
>
> __omap_dm_timer_reset(timer->io_base, 0, 0, timer->func_offset);
> + omap_dm_timer_disable(timer);
> timer->posted = 1;
> }
>
> @@ -171,14 +173,13 @@ void omap_dm_timer_prepare(struct omap_dm_timer *timer)
> return;
> }
>
> - omap_dm_timer_enable(timer);
> -
> if (pdata->needs_manual_reset)
> omap_dm_timer_reset(timer);
>
> omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
>
> timer->posted = 1;
> + timer->context_changed = true;
You should protect these variables from races.
> }
>
> struct omap_dm_timer *omap_dm_timer_request(void)
> @@ -230,7 +231,6 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
>
> void omap_dm_timer_free(struct omap_dm_timer *timer)
> {
> - omap_dm_timer_disable(timer);
> clk_put(timer->fclk);
>
> WARN_ON(!timer->reserved);
> @@ -311,6 +311,11 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
>
> void omap_dm_timer_trigger(struct omap_dm_timer *timer)
> {
> + if (unlikely(!timer->reserved)) {
> + pr_err("%s: timer%d not enabled.\n", __func__, timer->id);
> + return;
> + }
> +
> omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
> }
> EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
> @@ -319,6 +324,20 @@ void omap_dm_timer_start(struct omap_dm_timer *timer)
> {
> u32 l;
>
> + omap_dm_timer_enable(timer);
> +
> + if (timer->loses_context) {
> + u32 ctx_loss_cnt_after;
> +
> + ctx_loss_cnt_after =
> + timer->get_context_loss_count(&timer->pdev->dev);
> + if ((ctx_loss_cnt_after != timer->ctx_loss_count)&&
> + timer->context_saved) {
> + omap_timer_restore_context(timer);
> + timer->context_saved = false;
Ditto. It applies to rest of the patch.
Rest look ok.
Regards
Santosh
WARNING: multiple messages have this Message-ID (diff)
From: santosh.shilimkar@ti.com (Santosh)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v14 REPOST 12/12] OMAP: dmtimer: Off mode support
Date: Fri, 26 Aug 2011 21:34:33 +0530 [thread overview]
Message-ID: <4E57C411.3050906@ti.com> (raw)
In-Reply-To: <1310731501-13078-13-git-send-email-tarun.kanti@ti.com>
On Friday 15 July 2011 05:35 PM, Tarun Kanti DebBarma wrote:
> Clock is enabled only when timer is started and disabled when the the timer
> is stopped. Therefore before accessing registers in functions clock is enabled
> and then disabled back at the end of access.
> Context save and restore functions are called as needed based upon whether the
> context is lost or not.
>
> Signed-off-by: Tarun Kanti DebBarma<tarun.kanti@ti.com>
> ---
> arch/arm/mach-omap2/timer.c | 17 +++++
> arch/arm/plat-omap/dmtimer.c | 97 +++++++++++++++++++++++++++--
> arch/arm/plat-omap/include/plat/dmtimer.h | 9 +++
> 3 files changed, 118 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index 9d47300..d1c6219 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -44,6 +44,9 @@
> #include<plat/common.h>
> #include<plat/omap_hwmod.h>
> #include<plat/omap_device.h>
> +#include<plat/omap-pm.h>
> +
> +#include "powerdomain.h"
>
> /* Parent clocks, eventually these will come from the clock framework */
>
> @@ -409,6 +412,16 @@ static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
> return ret;
> }
>
> +#ifdef CONFIG_PM
> +static int omap_timer_get_context_loss(struct device *dev)
> +{
> + return omap_pm_get_dev_context_loss_count(dev);
> +}
> +
> +#else
> +#define omap_gpio_get_context_loss NULL
> +#endif
> +
> struct omap_device_pm_latency omap2_dmtimer_latency[] = {
> {
> .deactivate_func = omap_device_idle_hwmods,
> @@ -437,6 +450,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
> struct dmtimer_platform_data *pdata;
> struct omap_device *od;
> struct omap_timer_capability_dev_attr *timer_dev_attr;
> + struct powerdomain *pwrdm;
>
> pr_debug("%s: %s\n", __func__, oh->name);
>
> @@ -466,6 +480,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
>
> pdata->set_timer_src = omap2_dm_timer_set_src;
> pdata->timer_ip_type = oh->class->rev;
> + pwrdm = omap_hwmod_get_pwrdm(oh);
> + pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
> + pdata->get_context_loss_count = omap_timer_get_context_loss;
>
> od = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
> omap2_dmtimer_latency,
> diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
> index cdef48b..db14d7f 100644
> --- a/arch/arm/plat-omap/dmtimer.c
> +++ b/arch/arm/plat-omap/dmtimer.c
> @@ -151,12 +151,14 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
>
> static void omap_dm_timer_reset(struct omap_dm_timer *timer)
> {
> + omap_dm_timer_enable(timer);
> if (timer->pdev->id != 1) {
> omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
> omap_dm_timer_wait_for_reset(timer);
> }
>
> __omap_dm_timer_reset(timer->io_base, 0, 0, timer->func_offset);
> + omap_dm_timer_disable(timer);
> timer->posted = 1;
> }
>
> @@ -171,14 +173,13 @@ void omap_dm_timer_prepare(struct omap_dm_timer *timer)
> return;
> }
>
> - omap_dm_timer_enable(timer);
> -
> if (pdata->needs_manual_reset)
> omap_dm_timer_reset(timer);
>
> omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
>
> timer->posted = 1;
> + timer->context_changed = true;
You should protect these variables from races.
> }
>
> struct omap_dm_timer *omap_dm_timer_request(void)
> @@ -230,7 +231,6 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
>
> void omap_dm_timer_free(struct omap_dm_timer *timer)
> {
> - omap_dm_timer_disable(timer);
> clk_put(timer->fclk);
>
> WARN_ON(!timer->reserved);
> @@ -311,6 +311,11 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
>
> void omap_dm_timer_trigger(struct omap_dm_timer *timer)
> {
> + if (unlikely(!timer->reserved)) {
> + pr_err("%s: timer%d not enabled.\n", __func__, timer->id);
> + return;
> + }
> +
> omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
> }
> EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
> @@ -319,6 +324,20 @@ void omap_dm_timer_start(struct omap_dm_timer *timer)
> {
> u32 l;
>
> + omap_dm_timer_enable(timer);
> +
> + if (timer->loses_context) {
> + u32 ctx_loss_cnt_after;
> +
> + ctx_loss_cnt_after =
> + timer->get_context_loss_count(&timer->pdev->dev);
> + if ((ctx_loss_cnt_after != timer->ctx_loss_count)&&
> + timer->context_saved) {
> + omap_timer_restore_context(timer);
> + timer->context_saved = false;
Ditto. It applies to rest of the patch.
Rest look ok.
Regards
Santosh
next prev parent reply other threads:[~2011-08-26 16:04 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-15 12:04 [PATCH v14 REPOST 00/12] dmtimer adaptation to platform_driver Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-07-15 12:04 ` [PATCH v14 REPOST 01/12] OMAP2+: dmtimer: add device names to flck nodes Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 14:15 ` Santosh
2011-08-26 14:15 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 02/12] OMAP4: hwmod data: add dmtimer version information Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 15:21 ` Santosh
2011-08-26 15:21 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 03/12] OMAP1: dmtimer: conversion to platform devices Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 14:26 ` Santosh
2011-08-26 14:26 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 04/12] OMAP2+: dmtimer: convert " Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 14:33 ` Santosh
2011-08-26 14:33 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 05/12] OMAP: dmtimer: platform driver Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 14:34 ` Santosh
2011-08-26 14:34 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 06/12] OMAP: dmtimer: switch-over to platform device driver Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 15:20 ` Santosh
2011-08-26 15:20 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 07/12] OMAP: dmtimer: pm_runtime support Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 15:27 ` Santosh
2011-08-26 15:27 ` Santosh
2011-08-26 16:23 ` Kevin Hilman
2011-08-26 16:23 ` Kevin Hilman
2011-08-26 16:34 ` Santosh
2011-08-26 16:34 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 08/12] OMAP: dmtimer: add timeout to low-level routines Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 15:30 ` Santosh
2011-08-26 15:30 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 09/12] OMAP: dmtimer: use mutex instead of spinlock Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 15:34 ` Santosh
2011-08-26 15:34 ` Santosh
2011-08-26 16:09 ` Santosh
2011-08-26 16:09 ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 10/12] OMAP: dmtimer: mark clocksource and clockevent timers reserved Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-08-26 15:44 ` Santosh
2011-08-26 15:44 ` Santosh
2011-07-15 12:05 ` [PATCH v14 REPOST 11/12] OMAP: dmtimer: add context save/restore routines Tarun Kanti DebBarma
2011-07-15 12:05 ` Tarun Kanti DebBarma
2011-08-26 15:46 ` Santosh
2011-08-26 15:46 ` Santosh
2011-07-15 12:05 ` [PATCH v14 REPOST 12/12] OMAP: dmtimer: Off mode support Tarun Kanti DebBarma
2011-07-15 12:05 ` Tarun Kanti DebBarma
2011-08-26 16:04 ` Santosh [this message]
2011-08-26 16:04 ` Santosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E57C411.3050906@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tarun.kanti@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.