* [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp
@ 2011-09-08 13:11 Daniel Schenkenberger
2011-09-08 18:07 ` [lm-sensors] Fintek F71862FG Super IO Sensors only shows Hans de Goede
` (8 more replies)
0 siblings, 9 replies; 10+ messages in thread
From: Daniel Schenkenberger @ 2011-09-08 13:11 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1.1: Type: text/plain, Size: 12204 bytes --]
sensors detect my chip but he only shows the core temp.
sensors-detect:
mezo@vdr:~$ sudo sensors-detect[sudo] password for mezo:
# sensors-detect revision 5861 (2010-09-21 17:21:05 +0200)
# System: OEM OEM
# Board: PCPartner G43-F71862
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Fintek F71862FG Super IO Sensors' Success!
(address 0x295, driver `f71882fg')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): yes
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH10
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.
Next adapter: Technotrend TT-connect S-2400 (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Adapter cannot be probed, skipping.
Next adapter: NVIDIA i2c adapter 0 at 1:00.0 (i2c-1)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-2)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-3)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: NVIDIA i2c adapter 5 at 1:00.0 (i2c-4)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: NVIDIA i2c adapter 6 at 1:00.0 (i2c-5)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: NVIDIA i2c adapter 7 at 1:00.0 (i2c-6)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: NVIDIA i2c adapter 8 at 1:00.0 (i2c-7)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: NVIDIA i2c adapter 9 at 1:00.0 (i2c-8)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: SMBus I801 adapter at 0500 (i2c-9)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x4e
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6659'... No
Probing for `Maxim MAX6647'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP411'... No
Probing for `Texas Instruments TMP421'... No
Probing for `Texas Instruments TMP422'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM64'... No
Probing for `National Semiconductor LM73'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `Fintek F75121R/F75122R/RG (VID+GPIO)'... No
Probing for `Fintek F75111R/RG/N (GPIO)'... No
Probing for `ITE IT8201R/IT8203R/IT8206R/IT8266R'... Yes
(confidence 6, not a hardware monitoring chip)
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Driver `f71882fg':
* ISA bus, address 0x295
Chip `Fintek F71862FG Super IO Sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
f71882fg
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)yes
Successful!
Monitoring programs won't work until the needed modules are
loaded. You may want to run 'service module-init-tools start'
to load them.
Unloading i2c-dev... OK
Unloading i2c-i801... OK Unloading cpuid... OK
sensors show me only:
mezo@vdr:/etc/sensors.d$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0°C (crit = +127.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +55.0°C (high = +80.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +55.0°C (high = +80.0°C, crit = +100.0°C)
lsmod says the module is loaded and i added
"acpi_enforce_resources=lax" to my grub:
mezo@vdr:~$ lsmod
Module Size Used by
lirc_serial 19165 3
snd_hda_codec_hdmi 28167 4
snd_hda_codec_realtek 336771 1
phc_intel 18278 1
cryptd 20510 0
aes_x86_64 17208 1
aes_generic 38279 1 aes_x86_64
mperf 12667 1 phc_intel
cpufreq_stats 13257 0
nvidia 11713775 54
snd_hda_intel 33176 3
snd_hda_codec 103804 3
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
arc4 12529 2
snd_hwdep 13604 1 snd_hda_codec
lnbp21 12938 1
ath9k 118238 0
nfsd 316512 13
tda826x 12973 1
snd_pcm 96391 6 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
mac80211 294370 1 ath9k
tda10086 18502 1
dvb_usb_ttusb2 21908 10
dvb_usb 24290 1 dvb_usb_ttusb2
snd_seq_midi 13324 0
ir_lirc_codec 12898 0
lirc_dev 19232 2 lirc_serial,ir_lirc_codec
exportfs 12998 1 nfsd
ath9k_common 13851 1 ath9k
ath9k_hw 323077 2 ath9k,ath9k_common
nfs 330417 0
ir_sony_decoder 12549 0
f71882fg 35576 0
snd_rawmidi 30486 1 snd_seq_midi
ir_jvc_decoder 12546 0
ir_rc6_decoder 12546 0
coretemp 13490 0
snd_seq_midi_event 14899 1 snd_seq_midi
ir_rc5_decoder 12546 0
dvb_core 110487 1 dvb_usb
snd_seq 61621 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29602 2 snd_pcm,snd_seq
snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq
ir_nec_decoder 12546 0
snd 67382 13
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ath 23773 2 ath9k,ath9k_hw
serio_raw 13166 0
lp 17825 0
lockd 85732 2 nfsd,nfs
fscache 57123 1 nfs
nfs_acl 12883 2 nfsd,nfs
rc_core 26918 8
dvb_usb_ttusb2,dvb_usb,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder
auth_rpcgss 52881 2 nfsd,nfs
sunrpc 234297 14 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
soundcore 12680 1 snd
joydev 17606 0
cfg80211 178528 3 ath9k,mac80211,ath
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
parport 46458 1 lp
usbhid 46956 0
hid 91020 1 usbhid
r8169 48022 0
vesafb 13761 1
my mainboard is:
http://www.ubuntu-forum.de/index.php?page=ExternalLink&url=http%3A%2F%2Fwww.zotacusa.com%2Fintel-lga-775-g43-mini-itx-g43itx-a-e.html
[-- Attachment #1.2: Type: text/html, Size: 15633 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
@ 2011-09-08 18:07 ` Hans de Goede
2011-09-08 18:11 ` Guenter Roeck
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2011-09-08 18:07 UTC (permalink / raw)
To: lm-sensors
Hi,
On 09/08/2011 03:11 PM, Daniel Schenkenberger wrote:
> sensors detect my chip but he only shows the core temp.
>
> sensors-detect:
>
> mezo@vdr:~$ sudo sensors-detect[sudo] password for mezo:
> # sensors-detect revision 5861 (2010-09-21 17:21:05 +0200)
> # System: OEM OEM
> # Board: PCPartner G43-F71862
>
<Snip>
> Driver `coretemp':
> * Chip `Intel digital thermal sensor' (confidence: 9)
>
> Driver `f71882fg':
> * ISA bus, address 0x295
> Chip `Fintek F71862FG Super IO Sensors' (confidence: 9)
<Snip>
> sensors show me only:
>
> mezo@vdr:/etc/sensors.d$ sensors
> acpitz-virtual-0
> Adapter: Virtual device
> temp1: +40.0°C (crit = +127.0°C)
>
> coretemp-isa-0000
> Adapter: ISA adapter
> Core 0: +55.0°C (high = +80.0°C, crit = +100.0°C)
>
> coretemp-isa-0001
> Adapter: ISA adapter
> Core 1: +55.0°C (high = +80.0°C, crit = +100.0°C)
>
Hmm, that is weird. Likely the problem is that
the kernel driver finds the device and thus the module
loads, and then during driver initialization it finds something
it does not like so it does not bind to the platform device
created during the probing phase.
Can you please do (as root):
rmmod f71882fg
modprobe f71882fg
dmesg
And then send a reply with the last few lines of the dmesg output
(All the ones referring to the f71882fg driver).
Thanks,
Hans
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
2011-09-08 18:07 ` [lm-sensors] Fintek F71862FG Super IO Sensors only shows Hans de Goede
@ 2011-09-08 18:11 ` Guenter Roeck
2011-09-08 20:32 ` Hans de Goede
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2011-09-08 18:11 UTC (permalink / raw)
To: lm-sensors
On Thu, 2011-09-08 at 14:07 -0400, Hans de Goede wrote:
> Hi,
>
> On 09/08/2011 03:11 PM, Daniel Schenkenberger wrote:
> > sensors detect my chip but he only shows the core temp.
> >
> > sensors-detect:
> >
> > mezo@vdr:~$ sudo sensors-detect[sudo] password for mezo:
> > # sensors-detect revision 5861 (2010-09-21 17:21:05 +0200)
> > # System: OEM OEM
> > # Board: PCPartner G43-F71862
> >
>
> <Snip>
>
> > Driver `coretemp':
> > * Chip `Intel digital thermal sensor' (confidence: 9)
> >
> > Driver `f71882fg':
> > * ISA bus, address 0x295
> > Chip `Fintek F71862FG Super IO Sensors' (confidence: 9)
>
> <Snip>
>
> > sensors show me only:
> >
> > mezo@vdr:/etc/sensors.d$ sensors
> > acpitz-virtual-0
> > Adapter: Virtual device
> > temp1: +40.0°C (crit = +127.0°C)
> >
> > coretemp-isa-0000
> > Adapter: ISA adapter
> > Core 0: +55.0°C (high = +80.0°C, crit = +100.0°C)
> >
> > coretemp-isa-0001
> > Adapter: ISA adapter
> > Core 1: +55.0°C (high = +80.0°C, crit = +100.0°C)
> >
>
> Hmm, that is weird. Likely the problem is that
> the kernel driver finds the device and thus the module
> loads, and then during driver initialization it finds something
> it does not like so it does not bind to the platform device
> created during the probing phase.
>
Maybe this is due to an old driver / kernel version ? coretemp is
definitely not from the latest kernel.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
2011-09-08 18:07 ` [lm-sensors] Fintek F71862FG Super IO Sensors only shows Hans de Goede
2011-09-08 18:11 ` Guenter Roeck
@ 2011-09-08 20:32 ` Hans de Goede
2011-09-08 20:35 ` Jean Delvare
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2011-09-08 20:32 UTC (permalink / raw)
To: lm-sensors
Hi,
First of all please those drop the list from the To / CC
list, if you start a discussion on the list it is sort
of list reader friendly to also finish it there.
On 09/08/2011 09:07 PM, Daniel Schenkenberger wrote:
> dmesg says:
>
> [ 216.007958] f71882fg: Found f71862fg chip at 0x290, revision 18
> [ 216.008806] ACPI: resource f71882fg [io 0x0290-0x0297] conflicts with ACPI r egion IP__ [io 0x295-0x296]
> [ 216.012580] f71882fg f71882fg.656: Invalid (reserved) pwm settings: 0x01
>
> i added "acpi_enforce_resources=lax" to my grub. if i boot without this the module won't load.
That is not necessarily a good idea, see:
http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31
To quote myself from that page: "a really bad idea and can cause all sort of issues
(including things like changing CPU / RAM voltage or clock speed)."
So be warned!
Now back to the problem, which is:
[ 216.012580] f71882fg f71882fg.656: Invalid (reserved) pwm settings: 0x01
Reading the data sheet, this means that the pwm settings for
fan 2 and 3 are: 00 and 00, where as fan 1 has 01. The data sheet gives
the following table for these:
00: Reserved
01: Auto fan speed control, fan speed will follow different temperature by
different duty cycle (voltage) that define in 0xB6-0xBE.
10: Reserved
11: Manual mode fan control, user can write expect duty cycle (PWM fan
type) or voltage(linear fan type) to 0xC3, and F71883FG will output this
value duty or voltage to control fan speed.
Never mind the F71883FG in there, this really if from the F71862FG datasheet
(copy paste error in the data sheet), see:
http://www.fintek.com.tw/eng/products.asp?BID=1&SID\x17
So the driver bails because something, likely the BIOS on your board has
written an illegal value to the Fan mode Select Register.
I guess the BIOS only setups fan 1 and the *cough* brilliant *cough* BIOS
developers decided to just write 00 as value for the other fans, sigh.
There are really 2 things we can do here:
1) Overwrite the BIOS settings, tricky, could do this with a module option
2) Instead of not binding the driver at all, allow the driver initialization
to continue normally, but don't register the pwm interface. This requires
some thinking wrt modifying the code a bit though.
1 is a really bad idea IMHO, so I'll think a bit about doing 2.
Regards,
Hans
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
` (2 preceding siblings ...)
2011-09-08 20:32 ` Hans de Goede
@ 2011-09-08 20:35 ` Jean Delvare
2011-09-08 20:59 ` Guenter Roeck
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Jean Delvare @ 2011-09-08 20:35 UTC (permalink / raw)
To: lm-sensors
On Thu, 08 Sep 2011 22:32:22 +0200, Hans de Goede wrote:
> Now back to the problem, which is:
> [ 216.012580] f71882fg f71882fg.656: Invalid (reserved) pwm settings: 0x01
>
> Reading the data sheet, this means that the pwm settings for
> fan 2 and 3 are: 00 and 00, where as fan 1 has 01. The data sheet gives
> the following table for these:
>
> 00: Reserved
> 01: Auto fan speed control, fan speed will follow different temperature by
> different duty cycle (voltage) that define in 0xB6-0xBE.
> 10: Reserved
> 11: Manual mode fan control, user can write expect duty cycle (PWM fan
> type) or voltage(linear fan type) to 0xC3, and F71883FG will output this
> value duty or voltage to control fan speed.
>
> Never mind the F71883FG in there, this really if from the F71862FG datasheet
> (copy paste error in the data sheet), see:
> http://www.fintek.com.tw/eng/products.asp?BID=1&SID\x17
>
> So the driver bails because something, likely the BIOS on your board has
> written an illegal value to the Fan mode Select Register.
>
> I guess the BIOS only setups fan 1 and the *cough* brilliant *cough* BIOS
> developers decided to just write 00 as value for the other fans, sigh.
>
> There are really 2 things we can do here:
> 1) Overwrite the BIOS settings, tricky, could do this with a module option
> 2) Instead of not binding the driver at all, allow the driver initialization
> to continue normally, but don't register the pwm interface. This requires
> some thinking wrt modifying the code a bit though.
>
> 1 is a really bad idea IMHO, so I'll think a bit about doing 2.
And of course option 0, to start with, is to check for a BIOS update
for the board in question, and report to the vendor if no BIOS fix is
available yet.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
` (3 preceding siblings ...)
2011-09-08 20:35 ` Jean Delvare
@ 2011-09-08 20:59 ` Guenter Roeck
2011-09-08 21:02 ` Hans de Goede
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2011-09-08 20:59 UTC (permalink / raw)
To: lm-sensors
On Thu, 2011-09-08 at 16:32 -0400, Hans de Goede wrote:
> Hi,
>
> First of all please those drop the list from the To / CC
> list, if you start a discussion on the list it is sort
> of list reader friendly to also finish it there.
>
> On 09/08/2011 09:07 PM, Daniel Schenkenberger wrote:
> > dmesg says:
> >
> > [ 216.007958] f71882fg: Found f71862fg chip at 0x290, revision 18
> > [ 216.008806] ACPI: resource f71882fg [io 0x0290-0x0297] conflicts with ACPI r egion IP__ [io 0x295-0x296]
> > [ 216.012580] f71882fg f71882fg.656: Invalid (reserved) pwm settings: 0x01
> >
> > i added "acpi_enforce_resources=lax" to my grub. if i boot without this the module won't load.
>
> That is not necessarily a good idea, see:
> http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31
>
> To quote myself from that page: "a really bad idea and can cause all sort of issues
> (including things like changing CPU / RAM voltage or clock speed)."
>
> So be warned!
>
> Now back to the problem, which is:
> [ 216.012580] f71882fg f71882fg.656: Invalid (reserved) pwm settings: 0x01
>
> Reading the data sheet, this means that the pwm settings for
> fan 2 and 3 are: 00 and 00, where as fan 1 has 01. The data sheet gives
> the following table for these:
>
> 00: Reserved
> 01: Auto fan speed control, fan speed will follow different temperature by
> different duty cycle (voltage) that define in 0xB6-0xBE.
> 10: Reserved
> 11: Manual mode fan control, user can write expect duty cycle (PWM fan
> type) or voltage(linear fan type) to 0xC3, and F71883FG will output this
> value duty or voltage to control fan speed.
>
> Never mind the F71883FG in there, this really if from the F71862FG datasheet
> (copy paste error in the data sheet), see:
> http://www.fintek.com.tw/eng/products.asp?BID=1&SID\x17
>
> So the driver bails because something, likely the BIOS on your board has
> written an illegal value to the Fan mode Select Register.
>
> I guess the BIOS only setups fan 1 and the *cough* brilliant *cough* BIOS
> developers decided to just write 00 as value for the other fans, sigh.
>
> There are really 2 things we can do here:
> 1) Overwrite the BIOS settings, tricky, could do this with a module option
> 2) Instead of not binding the driver at all, allow the driver initialization
> to continue normally, but don't register the pwm interface. This requires
> some thinking wrt modifying the code a bit though.
>
> 1 is a really bad idea IMHO, so I'll think a bit about doing 2.
>
Or 2a): Don't create sysfs entries for a fan if its mode value is
invalid (reserved).
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
` (4 preceding siblings ...)
2011-09-08 20:59 ` Guenter Roeck
@ 2011-09-08 21:02 ` Hans de Goede
2011-09-08 21:09 ` Daniel Schenkenberger
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2011-09-08 21:02 UTC (permalink / raw)
To: lm-sensors
Hi,
On 09/08/2011 10:35 PM, Jean Delvare wrote:
> On Thu, 08 Sep 2011 22:32:22 +0200, Hans de Goede wrote:
<snip>
>> I guess the BIOS only setups fan 1 and the *cough* brilliant *cough* BIOS
>> developers decided to just write 00 as value for the other fans, sigh.
>>
>> There are really 2 things we can do here:
>> 1) Overwrite the BIOS settings, tricky, could do this with a module option
>> 2) Instead of not binding the driver at all, allow the driver initialization
>> to continue normally, but don't register the pwm interface. This requires
>> some thinking wrt modifying the code a bit though.
>>
>> 1 is a really bad idea IMHO, so I'll think a bit about doing 2.
>
> And of course option 0, to start with, is to check for a BIOS update
> for the board in question, and report to the vendor if no BIOS fix is
> available yet.
I'm afraid that is very wishful thinking, but it makes sense to
try a BIOS update first. Daniel, can you see if there is one and
if it helps?
Regards,
Hans
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
` (5 preceding siblings ...)
2011-09-08 21:02 ` Hans de Goede
@ 2011-09-08 21:09 ` Daniel Schenkenberger
2011-09-09 10:12 ` Hans de Goede
2011-09-09 12:12 ` Hans de Goede
8 siblings, 0 replies; 10+ messages in thread
From: Daniel Schenkenberger @ 2011-09-08 21:09 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1.1: Type: text/plain, Size: 2886 bytes --]
the bios is already up to date. sorry, this is the first time i use a
mailinglist.
2011/9/8 Guenter Roeck <guenter.roeck@ericsson.com>
> On Thu, 2011-09-08 at 16:32 -0400, Hans de Goede wrote:
> > Hi,
> >
> > First of all please those drop the list from the To / CC
> > list, if you start a discussion on the list it is sort
> > of list reader friendly to also finish it there.
> >
> > On 09/08/2011 09:07 PM, Daniel Schenkenberger wrote:
> > > dmesg says:
> > >
> > > [ 216.007958] f71882fg: Found f71862fg chip at 0x290, revision 18
> > > [ 216.008806] ACPI: resource f71882fg [io 0x0290-0x0297] conflicts
> with ACPI r egion IP__ [io 0x295-0x296]
> > > [ 216.012580] f71882fg f71882fg.656: Invalid (reserved) pwm settings:
> 0x01
> > >
> > > i added "acpi_enforce_resources=lax" to my grub. if i boot without this
> the module won't load.
> >
> > That is not necessarily a good idea, see:
> >
> http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31
> >
> > To quote myself from that page: "a really bad idea and can cause all sort
> of issues
> > (including things like changing CPU / RAM voltage or clock speed)."
> >
> > So be warned!
> >
> > Now back to the problem, which is:
> > [ 216.012580] f71882fg f71882fg.656: Invalid (reserved) pwm settings:
> 0x01
> >
> > Reading the data sheet, this means that the pwm settings for
> > fan 2 and 3 are: 00 and 00, where as fan 1 has 01. The data sheet gives
> > the following table for these:
> >
> > 00: Reserved
> > 01: Auto fan speed control, fan speed will follow different temperature
> by
> > different duty cycle (voltage) that define in 0xB6-0xBE.
> > 10: Reserved
> > 11: Manual mode fan control, user can write expect duty cycle (PWM fan
> > type) or voltage(linear fan type) to 0xC3, and F71883FG will output this
> > value duty or voltage to control fan speed.
> >
> > Never mind the F71883FG in there, this really if from the F71862FG
> datasheet
> > (copy paste error in the data sheet), see:
> > http://www.fintek.com.tw/eng/products.asp?BID=1&SID=17
> >
> > So the driver bails because something, likely the BIOS on your board has
> > written an illegal value to the Fan mode Select Register.
> >
> > I guess the BIOS only setups fan 1 and the *cough* brilliant *cough* BIOS
> > developers decided to just write 00 as value for the other fans, sigh.
> >
> > There are really 2 things we can do here:
> > 1) Overwrite the BIOS settings, tricky, could do this with a module
> option
> > 2) Instead of not binding the driver at all, allow the driver
> initialization
> > to continue normally, but don't register the pwm interface. This requires
> > some thinking wrt modifying the code a bit though.
> >
> > 1 is a really bad idea IMHO, so I'll think a bit about doing 2.
> >
> Or 2a): Don't create sysfs entries for a fan if its mode value is
> invalid (reserved).
>
> Guenter
>
>
>
[-- Attachment #1.2: Type: text/html, Size: 4094 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
` (6 preceding siblings ...)
2011-09-08 21:09 ` Daniel Schenkenberger
@ 2011-09-09 10:12 ` Hans de Goede
2011-09-09 12:12 ` Hans de Goede
8 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2011-09-09 10:12 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 1946 bytes --]
Hi,
On 09/08/2011 10:59 PM, Guenter Roeck wrote:
> On Thu, 2011-09-08 at 16:32 -0400, Hans de Goede wrote:
<snip>
>> Reading the data sheet, this means that the pwm settings for
>> fan 2 and 3 are: 00 and 00, where as fan 1 has 01. The data sheet gives
>> the following table for these:
>>
>> 00: Reserved
>> 01: Auto fan speed control, fan speed will follow different temperature by
>> different duty cycle (voltage) that define in 0xB6-0xBE.
>> 10: Reserved
>> 11: Manual mode fan control, user can write expect duty cycle (PWM fan
>> type) or voltage(linear fan type) to 0xC3, and F71883FG will output this
>> value duty or voltage to control fan speed.
<snip>
>> So the driver bails because something, likely the BIOS on your board has
>> written an illegal value to the Fan mode Select Register.
>>
>> I guess the BIOS only setups fan 1 and the *cough* brilliant *cough* BIOS
>> developers decided to just write 00 as value for the other fans, sigh.
>>
>> There are really 2 things we can do here:
>> 1) Overwrite the BIOS settings, tricky, could do this with a module option
>> 2) Instead of not binding the driver at all, allow the driver initialization
>> to continue normally, but don't register the pwm interface. This requires
>> some thinking wrt modifying the code a bit though.
>>
>> 1 is a really bad idea IMHO, so I'll think a bit about doing 2.
>>
> Or 2a): Don't create sysfs entries for a fan if its mode value is
> invalid (reserved).
Good one, I had thought a bit about that too, but I was afraid the code
changes would be non nice to make. But it turns out doing this is reasonably
easy, I'll send a patch set for this in a separate thread.
Daniel, attached is a new standalone version of the f71882fg driver,
can you test this please?
To compile drop both files into a directory and then in this directory do:
make
sudo rmmod f71882fg
sudo insmod f71882fg.ko
And then run sensors again :)
Thanks & Regards,
Hans
[-- Attachment #2: Makefile --]
[-- Type: text/plain, Size: 158 bytes --]
obj-m += f71882fg.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
[-- Attachment #3: f71882fg.c --]
[-- Type: text/x-csrc, Size: 84888 bytes --]
/***************************************************************************
* Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> *
* Copyright (C) 2007-2011 Hans de Goede <hdegoede@redhat.com> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define pr_warn pr_warning
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/acpi.h>
#define DRVNAME "f71882fg"
#define SIO_F71858FG_LD_HWM 0x02 /* Hardware monitor logical device */
#define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device */
#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
#define SIO_REG_LDSEL 0x07 /* Logical device select */
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
#define SIO_F71808E_ID 0x0901 /* Chipset ID */
#define SIO_F71808A_ID 0x1001 /* Chipset ID */
#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
#define SIO_F71869_ID 0x0814 /* Chipset ID */
#define SIO_F71869A_ID 0x1007 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F71889E_ID 0x0909 /* Chipset ID */
#define SIO_F71889A_ID 0x1005 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
#define SIO_F81865_ID 0x0704 /* Chipset ID */
#define REGION_LENGTH 8
#define ADDR_REG_OFFSET 5
#define DATA_REG_OFFSET 6
#define F71882FG_REG_IN_STATUS 0x12 /* f7188x only */
#define F71882FG_REG_IN_BEEP 0x13 /* f7188x only */
#define F71882FG_REG_IN(nr) (0x20 + (nr))
#define F71882FG_REG_IN1_HIGH 0x32 /* f7188x only */
#define F71882FG_REG_FAN(nr) (0xA0 + (16 * (nr)))
#define F71882FG_REG_FAN_TARGET(nr) (0xA2 + (16 * (nr)))
#define F71882FG_REG_FAN_FULL_SPEED(nr) (0xA4 + (16 * (nr)))
#define F71882FG_REG_FAN_STATUS 0x92
#define F71882FG_REG_FAN_BEEP 0x93
#define F71882FG_REG_TEMP(nr) (0x70 + 2 * (nr))
#define F71882FG_REG_TEMP_OVT(nr) (0x80 + 2 * (nr))
#define F71882FG_REG_TEMP_HIGH(nr) (0x81 + 2 * (nr))
#define F71882FG_REG_TEMP_STATUS 0x62
#define F71882FG_REG_TEMP_BEEP 0x63
#define F71882FG_REG_TEMP_CONFIG 0x69
#define F71882FG_REG_TEMP_HYST(nr) (0x6C + (nr))
#define F71882FG_REG_TEMP_TYPE 0x6B
#define F71882FG_REG_TEMP_DIODE_OPEN 0x6F
#define F71882FG_REG_PWM(nr) (0xA3 + (16 * (nr)))
#define F71882FG_REG_PWM_TYPE 0x94
#define F71882FG_REG_PWM_ENABLE 0x96
#define F71882FG_REG_FAN_HYST(nr) (0x98 + (nr))
#define F71882FG_REG_FAN_FAULT_T 0x9F
#define F71882FG_FAN_NEG_TEMP_EN 0x20
#define F71882FG_FAN_PROG_SEL 0x80
#define F71882FG_REG_POINT_PWM(pwm, point) (0xAA + (point) + (16 * (pwm)))
#define F71882FG_REG_POINT_TEMP(pwm, point) (0xA6 + (point) + (16 * (pwm)))
#define F71882FG_REG_POINT_MAPPING(nr) (0xAF + 16 * (nr))
#define F71882FG_REG_START 0x01
#define F71882FG_MAX_INS 9
#define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */
static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg,
f71889fg, f71889ed, f71889a, f8000, f81865f };
static const char *f71882fg_names[] = {
"f71808e",
"f71808a",
"f71858fg",
"f71862fg",
"f71869", /* Both f71869f and f71869e, reg. compatible and same id */
"f71869a",
"f71882fg",
"f71889fg", /* f81801u too, same id */
"f71889ed",
"f71889a",
"f8000",
"f81865f",
};
static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
[f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1 },
[f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1 },
[f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
[f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
[f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0 },
};
static const char f71882fg_has_in1_alarm[] = {
[f71808e] = 0,
[f71808a] = 0,
[f71858fg] = 0,
[f71862fg] = 0,
[f71869] = 0,
[f71869a] = 0,
[f71882fg] = 1,
[f71889fg] = 1,
[f71889ed] = 1,
[f71889a] = 1,
[f8000] = 0,
[f81865f] = 1,
};
static const char f71882fg_fan_has_beep[] = {
[f71808e] = 0,
[f71808a] = 0,
[f71858fg] = 0,
[f71862fg] = 1,
[f71869] = 1,
[f71869a] = 1,
[f71882fg] = 1,
[f71889fg] = 1,
[f71889ed] = 1,
[f71889a] = 1,
[f8000] = 0,
[f81865f] = 1,
};
static const char f71882fg_nr_fans[] = {
[f71808e] = 3,
[f71808a] = 2, /* +1 fan which is monitor + simple pwm only */
[f71858fg] = 3,
[f71862fg] = 3,
[f71869] = 3,
[f71869a] = 3,
[f71882fg] = 4,
[f71889fg] = 3,
[f71889ed] = 3,
[f71889a] = 3,
[f8000] = 3, /* +1 fan which is monitor only */
[f81865f] = 2,
};
static const char f71882fg_temp_has_beep[] = {
[f71808e] = 0,
[f71808a] = 1,
[f71858fg] = 0,
[f71862fg] = 1,
[f71869] = 1,
[f71869a] = 1,
[f71882fg] = 1,
[f71889fg] = 1,
[f71889ed] = 1,
[f71889a] = 1,
[f8000] = 0,
[f81865f] = 1,
};
static const char f71882fg_nr_temps[] = {
[f71808e] = 2,
[f71808a] = 2,
[f71858fg] = 3,
[f71862fg] = 3,
[f71869] = 3,
[f71869a] = 3,
[f71882fg] = 3,
[f71889fg] = 3,
[f71889ed] = 3,
[f71889a] = 3,
[f8000] = 3,
[f81865f] = 2,
};
static struct platform_device *f71882fg_pdev;
/* Super-I/O Function prototypes */
static inline int superio_inb(int base, int reg);
static inline int superio_inw(int base, int reg);
static inline int superio_enter(int base);
static inline void superio_select(int base, int ld);
static inline void superio_exit(int base);
struct f71882fg_sio_data {
enum chips type;
};
struct f71882fg_data {
unsigned short addr;
enum chips type;
struct device *hwmon_dev;
struct mutex update_lock;
int temp_start; /* temp numbering start (0 or 1) */
char valid; /* !=0 if following fields are valid */
char auto_point_temp_signed;
unsigned long last_updated; /* In jiffies */
unsigned long last_limits; /* In jiffies */
/* Register Values */
u8 in[F71882FG_MAX_INS];
u8 in1_max;
u8 in_status;
u8 in_beep;
u16 fan[4];
u16 fan_target[4];
u16 fan_full_speed[4];
u8 fan_status;
u8 fan_beep;
/* Note: all models have max 3 temperature channels, but on some
they are addressed as 0-2 and on others as 1-3, so for coding
convenience we reserve space for 4 channels */
u16 temp[4];
u8 temp_ovt[4];
u8 temp_high[4];
u8 temp_hyst[2]; /* 2 hysts stored per reg */
u8 temp_type[4];
u8 temp_status;
u8 temp_beep;
u8 temp_diode_open;
u8 temp_config;
u8 pwm[4];
u8 pwm_enable;
u8 pwm_auto_point_hyst[2];
u8 pwm_auto_point_mapping[4];
u8 pwm_auto_point_pwm[4][5];
s8 pwm_auto_point_temp[4][4];
};
/* Sysfs in */
static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
char *buf);
static ssize_t show_in_max(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t store_in_max(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count);
static ssize_t show_in_beep(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t store_in_beep(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count);
static ssize_t show_in_alarm(struct device *dev, struct device_attribute
*devattr, char *buf);
/* Sysfs Fan */
static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
char *buf);
static ssize_t show_fan_full_speed(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_fan_full_speed(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_fan_beep(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t store_fan_beep(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count);
static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
*devattr, char *buf);
/* Sysfs Temp */
static ssize_t show_temp(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t show_temp_max(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t store_temp_max(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count);
static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count);
static ssize_t show_temp_crit(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t store_temp_crit(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count);
static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t show_temp_type(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t show_temp_beep(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t store_temp_beep(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count);
static ssize_t show_temp_alarm(struct device *dev, struct device_attribute
*devattr, char *buf);
static ssize_t show_temp_fault(struct device *dev, struct device_attribute
*devattr, char *buf);
/* PWM and Auto point control */
static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
char *buf);
static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count);
static ssize_t show_simple_pwm(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_simple_pwm(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_pwm_enable(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_pwm_enable(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_pwm_interpolate(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_pwm_interpolate(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_pwm_auto_point_channel(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_pwm_auto_point_channel(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_pwm_auto_point_pwm(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_pwm_auto_point_pwm(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_pwm_auto_point_temp(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_pwm_auto_point_temp(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count);
/* Sysfs misc */
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
char *buf);
static int __devinit f71882fg_probe(struct platform_device * pdev);
static int f71882fg_remove(struct platform_device *pdev);
static struct platform_driver f71882fg_driver = {
.driver = {
.owner = THIS_MODULE,
.name = DRVNAME,
},
.probe = f71882fg_probe,
.remove = f71882fg_remove,
};
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
/* Temp attr for the f71858fg, the f71858fg is special as it has its
temperature indexes start at 0 (the others start at 1) */
static struct sensor_device_attribute_2 f71858fg_temp_attr[] = {
SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 0),
SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
store_temp_max_hyst, 0, 0),
SENSOR_ATTR_2(temp1_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 0),
SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 0),
SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
0, 0),
SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 1),
SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
store_temp_max_hyst, 0, 1),
SENSOR_ATTR_2(temp2_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 1),
SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
0, 1),
SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 2),
SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
store_temp_max_hyst, 0, 2),
SENSOR_ATTR_2(temp3_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 2),
SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
0, 2),
SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
};
/* Temp attr for the standard models */
static struct sensor_device_attribute_2 fxxxx_temp_attr[3][9] = { {
SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1),
SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 1),
SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
store_temp_max_hyst, 0, 1),
/* Should really be temp1_max_alarm, but older versions did not handle
the max and crit alarms separately and lm_sensors v2 depends on the
presence of temp#_alarm files. The same goes for temp2/3 _alarm. */
SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 1),
SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
0, 1),
SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
SENSOR_ATTR_2(temp1_type, S_IRUGO, show_temp_type, NULL, 0, 1),
SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
}, {
SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 2),
SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 2),
SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
store_temp_max_hyst, 0, 2),
/* Should be temp2_max_alarm, see temp1_alarm note */
SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 2),
SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
0, 2),
SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2),
SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
}, {
SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3),
SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 3),
SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
store_temp_max_hyst, 0, 3),
/* Should be temp3_max_alarm, see temp1_alarm note */
SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 3),
SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 3),
SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
0, 3),
SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 7),
SENSOR_ATTR_2(temp3_type, S_IRUGO, show_temp_type, NULL, 0, 3),
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3),
} };
/* Temp attr for models which can beep on temp alarm */
static struct sensor_device_attribute_2 fxxxx_temp_beep_attr[3][2] = { {
SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
store_temp_beep, 0, 1),
SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
store_temp_beep, 0, 5),
}, {
SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
store_temp_beep, 0, 2),
SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
store_temp_beep, 0, 6),
}, {
SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
store_temp_beep, 0, 3),
SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
store_temp_beep, 0, 7),
} };
/* Temp attr for the f8000
Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
is used as hysteresis value to clear alarms
Also like the f71858fg its temperature indexes start at 0
*/
static struct sensor_device_attribute_2 f8000_temp_attr[] = {
SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 0),
SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 0),
SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 1),
SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 1),
SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 2),
SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 2),
SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
};
/* in attr for all models */
static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5),
SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
};
/* For models with in1 alarm capability */
static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = {
SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
0, 1),
SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
0, 1),
SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1),
};
/* Fan / PWM attr common to all models */
static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0),
SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR,
show_fan_full_speed,
store_fan_full_speed, 0, 0),
SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0),
SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0),
SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 0),
SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 0),
}, {
SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
show_fan_full_speed,
store_fan_full_speed, 0, 1),
SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 1),
SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 1),
}, {
SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
show_fan_full_speed,
store_fan_full_speed, 0, 2),
SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 2),
SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 2),
}, {
SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
show_fan_full_speed,
store_fan_full_speed, 0, 3),
SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 3),
SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 3),
} };
/* Attr for the third fan of the f71808a, which only has manual pwm */
static struct sensor_device_attribute_2 f71808a_fan3_attr[] = {
SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR,
show_simple_pwm, store_simple_pwm, 0, 2),
};
/* Attr for models which can beep on Fan alarm */
static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 0),
SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 1),
SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 2),
SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 3),
};
/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
standard models */
static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[3][7] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 0),
SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 0),
SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 0),
SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
}, {
SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 1),
SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 1),
SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 1),
SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
}, {
SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 2),
SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 2),
SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 2),
SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
} };
/* PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the
pwm setting when the temperature is above the pwmX_auto_point1_temp can be
programmed instead of being hardcoded to 0xff */
static struct sensor_device_attribute_2 f71869_auto_pwm_attr[3][8] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 0),
SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 0),
SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 0),
SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
}, {
SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 1),
SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 1),
SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 1),
SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
}, {
SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 2),
SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 2),
SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 2),
SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
} };
/* PWM attr for the standard models */
static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 0),
SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
2, 0),
SENSOR_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
3, 0),
SENSOR_ATTR_2(pwm1_auto_point5_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 0),
SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
1, 0),
SENSOR_ATTR_2(pwm1_auto_point3_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
2, 0),
SENSOR_ATTR_2(pwm1_auto_point4_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 0),
SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 1, 0),
SENSOR_ATTR_2(pwm1_auto_point3_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 2, 0),
SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
}, {
SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 1),
SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
2, 1),
SENSOR_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
3, 1),
SENSOR_ATTR_2(pwm2_auto_point5_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 1),
SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
1, 1),
SENSOR_ATTR_2(pwm2_auto_point3_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
2, 1),
SENSOR_ATTR_2(pwm2_auto_point4_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 1),
SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 1, 1),
SENSOR_ATTR_2(pwm2_auto_point3_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 2, 1),
SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
}, {
SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 2),
SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
2, 2),
SENSOR_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
3, 2),
SENSOR_ATTR_2(pwm3_auto_point5_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 2),
SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
1, 2),
SENSOR_ATTR_2(pwm3_auto_point3_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
2, 2),
SENSOR_ATTR_2(pwm3_auto_point4_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 2),
SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 1, 2),
SENSOR_ATTR_2(pwm3_auto_point3_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 2, 2),
SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
}, {
SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 3),
SENSOR_ATTR_2(pwm4_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 3),
SENSOR_ATTR_2(pwm4_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 3),
SENSOR_ATTR_2(pwm4_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
2, 3),
SENSOR_ATTR_2(pwm4_auto_point4_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
3, 3),
SENSOR_ATTR_2(pwm4_auto_point5_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 3),
SENSOR_ATTR_2(pwm4_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 3),
SENSOR_ATTR_2(pwm4_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
1, 3),
SENSOR_ATTR_2(pwm4_auto_point3_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
2, 3),
SENSOR_ATTR_2(pwm4_auto_point4_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 3),
SENSOR_ATTR_2(pwm4_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 3),
SENSOR_ATTR_2(pwm4_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 1, 3),
SENSOR_ATTR_2(pwm4_auto_point3_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 2, 3),
SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 3),
} };
/* Fan attr specific to the f8000 (4th fan input can only measure speed) */
static struct sensor_device_attribute_2 f8000_fan_attr[] = {
SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
};
/* PWM attr for the f8000, zones mapped to temp instead of to pwm!
Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
static struct sensor_device_attribute_2 f8000_auto_pwm_attr[3][14] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 2),
SENSOR_ATTR_2(temp1_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 2),
SENSOR_ATTR_2(temp1_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
2, 2),
SENSOR_ATTR_2(temp1_auto_point4_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
3, 2),
SENSOR_ATTR_2(temp1_auto_point5_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 2),
SENSOR_ATTR_2(temp1_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 2),
SENSOR_ATTR_2(temp1_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
1, 2),
SENSOR_ATTR_2(temp1_auto_point3_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
2, 2),
SENSOR_ATTR_2(temp1_auto_point4_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 2),
SENSOR_ATTR_2(temp1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 2),
SENSOR_ATTR_2(temp1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 1, 2),
SENSOR_ATTR_2(temp1_auto_point3_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 2, 2),
SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
}, {
SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
SENSOR_ATTR_2(temp2_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 0),
SENSOR_ATTR_2(temp2_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
2, 0),
SENSOR_ATTR_2(temp2_auto_point4_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
3, 0),
SENSOR_ATTR_2(temp2_auto_point5_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 0),
SENSOR_ATTR_2(temp2_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 0),
SENSOR_ATTR_2(temp2_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
1, 0),
SENSOR_ATTR_2(temp2_auto_point3_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
2, 0),
SENSOR_ATTR_2(temp2_auto_point4_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 0),
SENSOR_ATTR_2(temp2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 0),
SENSOR_ATTR_2(temp2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 1, 0),
SENSOR_ATTR_2(temp2_auto_point3_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 2, 0),
SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
}, {
SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 1),
SENSOR_ATTR_2(temp3_auto_point2_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 1),
SENSOR_ATTR_2(temp3_auto_point3_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
2, 1),
SENSOR_ATTR_2(temp3_auto_point4_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
3, 1),
SENSOR_ATTR_2(temp3_auto_point5_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
4, 1),
SENSOR_ATTR_2(temp3_auto_point1_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
0, 1),
SENSOR_ATTR_2(temp3_auto_point2_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
1, 1),
SENSOR_ATTR_2(temp3_auto_point3_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
2, 1),
SENSOR_ATTR_2(temp3_auto_point4_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp, store_pwm_auto_point_temp,
3, 1),
SENSOR_ATTR_2(temp3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
show_pwm_auto_point_temp_hyst,
store_pwm_auto_point_temp_hyst,
0, 1),
SENSOR_ATTR_2(temp3_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 1, 1),
SENSOR_ATTR_2(temp3_auto_point3_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 2, 1),
SENSOR_ATTR_2(temp3_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
} };
/* Super I/O functions */
static inline int superio_inb(int base, int reg)
{
outb(reg, base);
return inb(base + 1);
}
static int superio_inw(int base, int reg)
{
int val;
val = superio_inb(base, reg) << 8;
val |= superio_inb(base, reg + 1);
return val;
}
static inline int superio_enter(int base)
{
/* Don't step on other drivers' I/O space by accident */
if (!request_region(base, 2, DRVNAME)) {
pr_err("I/O address 0x%04x already in use\n", base);
return -EBUSY;
}
/* according to the datasheet the key must be send twice! */
outb(SIO_UNLOCK_KEY, base);
outb(SIO_UNLOCK_KEY, base);
return 0;
}
static inline void superio_select(int base, int ld)
{
outb(SIO_REG_LDSEL, base);
outb(ld, base + 1);
}
static inline void superio_exit(int base)
{
outb(SIO_LOCK_KEY, base);
release_region(base, 2);
}
static inline int fan_from_reg(u16 reg)
{
return reg ? (1500000 / reg) : 0;
}
static inline u16 fan_to_reg(int fan)
{
return fan ? (1500000 / fan) : 0;
}
static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg)
{
u8 val;
outb(reg, data->addr + ADDR_REG_OFFSET);
val = inb(data->addr + DATA_REG_OFFSET);
return val;
}
static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg)
{
u16 val;
val = f71882fg_read8(data, reg) << 8;
val |= f71882fg_read8(data, reg + 1);
return val;
}
static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val)
{
outb(reg, data->addr + ADDR_REG_OFFSET);
outb(val, data->addr + DATA_REG_OFFSET);
}
static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
{
f71882fg_write8(data, reg, val >> 8);
f71882fg_write8(data, reg + 1, val & 0xff);
}
static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
{
if (data->type == f71858fg)
return f71882fg_read16(data, F71882FG_REG_TEMP(nr));
else
return f71882fg_read8(data, F71882FG_REG_TEMP(nr));
}
static struct f71882fg_data *f71882fg_update_device(struct device *dev)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int nr_fans = f71882fg_nr_fans[data->type];
int nr_temps = f71882fg_nr_temps[data->type];
int nr, reg, point;
mutex_lock(&data->update_lock);
/* Update once every 60 seconds */
if (time_after(jiffies, data->last_limits + 60 * HZ) ||
!data->valid) {
if (f71882fg_has_in1_alarm[data->type]) {
data->in1_max =
f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
data->in_beep =
f71882fg_read8(data, F71882FG_REG_IN_BEEP);
}
/* Get High & boundary temps*/
for (nr = data->temp_start; nr < nr_temps + data->temp_start;
nr++) {
data->temp_ovt[nr] = f71882fg_read8(data,
F71882FG_REG_TEMP_OVT(nr));
data->temp_high[nr] = f71882fg_read8(data,
F71882FG_REG_TEMP_HIGH(nr));
}
if (data->type != f8000) {
data->temp_hyst[0] = f71882fg_read8(data,
F71882FG_REG_TEMP_HYST(0));
data->temp_hyst[1] = f71882fg_read8(data,
F71882FG_REG_TEMP_HYST(1));
}
/* All but the f71858fg / f8000 have this register */
if ((data->type != f71858fg) && (data->type != f8000)) {
reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
data->temp_type[1] = (reg & 0x02) ? 2 : 4;
data->temp_type[2] = (reg & 0x04) ? 2 : 4;
data->temp_type[3] = (reg & 0x08) ? 2 : 4;
}
if (f71882fg_fan_has_beep[data->type])
data->fan_beep = f71882fg_read8(data,
F71882FG_REG_FAN_BEEP);
if (f71882fg_temp_has_beep[data->type])
data->temp_beep = f71882fg_read8(data,
F71882FG_REG_TEMP_BEEP);
data->pwm_enable = f71882fg_read8(data,
F71882FG_REG_PWM_ENABLE);
data->pwm_auto_point_hyst[0] =
f71882fg_read8(data, F71882FG_REG_FAN_HYST(0));
data->pwm_auto_point_hyst[1] =
f71882fg_read8(data, F71882FG_REG_FAN_HYST(1));
for (nr = 0; nr < nr_fans; nr++) {
data->pwm_auto_point_mapping[nr] =
f71882fg_read8(data,
F71882FG_REG_POINT_MAPPING(nr));
switch (data->type) {
default:
for (point = 0; point < 5; point++) {
data->pwm_auto_point_pwm[nr][point] =
f71882fg_read8(data,
F71882FG_REG_POINT_PWM
(nr, point));
}
for (point = 0; point < 4; point++) {
data->pwm_auto_point_temp[nr][point] =
f71882fg_read8(data,
F71882FG_REG_POINT_TEMP
(nr, point));
}
break;
case f71808e:
case f71869:
data->pwm_auto_point_pwm[nr][0] =
f71882fg_read8(data,
F71882FG_REG_POINT_PWM(nr, 0));
/* Fall through */
case f71862fg:
data->pwm_auto_point_pwm[nr][1] =
f71882fg_read8(data,
F71882FG_REG_POINT_PWM
(nr, 1));
data->pwm_auto_point_pwm[nr][4] =
f71882fg_read8(data,
F71882FG_REG_POINT_PWM
(nr, 4));
data->pwm_auto_point_temp[nr][0] =
f71882fg_read8(data,
F71882FG_REG_POINT_TEMP
(nr, 0));
data->pwm_auto_point_temp[nr][3] =
f71882fg_read8(data,
F71882FG_REG_POINT_TEMP
(nr, 3));
break;
}
}
data->last_limits = jiffies;
}
/* Update every second */
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
data->temp_status = f71882fg_read8(data,
F71882FG_REG_TEMP_STATUS);
data->temp_diode_open = f71882fg_read8(data,
F71882FG_REG_TEMP_DIODE_OPEN);
for (nr = data->temp_start; nr < nr_temps + data->temp_start;
nr++)
data->temp[nr] = f71882fg_read_temp(data, nr);
data->fan_status = f71882fg_read8(data,
F71882FG_REG_FAN_STATUS);
for (nr = 0; nr < nr_fans; nr++) {
data->fan[nr] = f71882fg_read16(data,
F71882FG_REG_FAN(nr));
data->fan_target[nr] =
f71882fg_read16(data, F71882FG_REG_FAN_TARGET(nr));
data->fan_full_speed[nr] =
f71882fg_read16(data,
F71882FG_REG_FAN_FULL_SPEED(nr));
data->pwm[nr] =
f71882fg_read8(data, F71882FG_REG_PWM(nr));
}
/* Some models have 1 more fan with limited capabilities */
if (data->type == f71808a) {
data->fan[2] = f71882fg_read16(data,
F71882FG_REG_FAN(2));
data->pwm[2] = f71882fg_read8(data,
F71882FG_REG_PWM(2));
}
if (data->type == f8000)
data->fan[3] = f71882fg_read16(data,
F71882FG_REG_FAN(3));
if (f71882fg_has_in1_alarm[data->type])
data->in_status = f71882fg_read8(data,
F71882FG_REG_IN_STATUS);
for (nr = 0; nr < F71882FG_MAX_INS; nr++)
if (f71882fg_has_in[data->type][nr])
data->in[nr] = f71882fg_read8(data,
F71882FG_REG_IN(nr));
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
/* Sysfs Interface */
static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
int speed = fan_from_reg(data->fan[nr]);
if (speed == FAN_MIN_DETECT)
speed = 0;
return sprintf(buf, "%d\n", speed);
}
static ssize_t show_fan_full_speed(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
int speed = fan_from_reg(data->fan_full_speed[nr]);
return sprintf(buf, "%d\n", speed);
}
static ssize_t store_fan_full_speed(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val = SENSORS_LIMIT(val, 23, 1500000);
val = fan_to_reg(val);
mutex_lock(&data->update_lock);
f71882fg_write16(data, F71882FG_REG_FAN_FULL_SPEED(nr), val);
data->fan_full_speed[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_fan_beep(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
if (data->fan_beep & (1 << nr))
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
}
static ssize_t store_fan_beep(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
unsigned long val;
err = strict_strtoul(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP);
if (val)
data->fan_beep |= 1 << nr;
else
data->fan_beep &= ~(1 << nr);
f71882fg_write8(data, F71882FG_REG_FAN_BEEP, data->fan_beep);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
if (data->fan_status & (1 << nr))
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
}
static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
return sprintf(buf, "%d\n", data->in[nr] * 8);
}
static ssize_t show_in_max(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
return sprintf(buf, "%d\n", data->in1_max * 8);
}
static ssize_t store_in_max(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val /= 8;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val);
data->in1_max = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_in_beep(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
if (data->in_beep & (1 << nr))
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
}
static ssize_t store_in_beep(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
unsigned long val;
err = strict_strtoul(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
if (val)
data->in_beep |= 1 << nr;
else
data->in_beep &= ~(1 << nr);
f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_in_alarm(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
if (data->in_status & (1 << nr))
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
}
static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
int sign, temp;
if (data->type == f71858fg) {
/* TEMP_TABLE_SEL 1 or 3 ? */
if (data->temp_config & 1) {
sign = data->temp[nr] & 0x0001;
temp = (data->temp[nr] >> 5) & 0x7ff;
} else {
sign = data->temp[nr] & 0x8000;
temp = (data->temp[nr] >> 5) & 0x3ff;
}
temp *= 125;
if (sign)
temp -= 128000;
} else
temp = data->temp[nr] * 1000;
return sprintf(buf, "%d\n", temp);
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
return sprintf(buf, "%d\n", data->temp_high[nr] * 1000);
}
static ssize_t store_temp_max(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val /= 1000;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_TEMP_HIGH(nr), val);
data->temp_high[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
int temp_max_hyst;
mutex_lock(&data->update_lock);
if (nr & 1)
temp_max_hyst = data->temp_hyst[nr / 2] >> 4;
else
temp_max_hyst = data->temp_hyst[nr / 2] & 0x0f;
temp_max_hyst = (data->temp_high[nr] - temp_max_hyst) * 1000;
mutex_unlock(&data->update_lock);
return sprintf(buf, "%d\n", temp_max_hyst);
}
static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
ssize_t ret = count;
u8 reg;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val /= 1000;
mutex_lock(&data->update_lock);
/* convert abs to relative and check */
data->temp_high[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_HIGH(nr));
val = SENSORS_LIMIT(val, data->temp_high[nr] - 15,
data->temp_high[nr]);
val = data->temp_high[nr] - val;
/* convert value to register contents */
reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST(nr / 2));
if (nr & 1)
reg = (reg & 0x0f) | (val << 4);
else
reg = (reg & 0xf0) | val;
f71882fg_write8(data, F71882FG_REG_TEMP_HYST(nr / 2), reg);
data->temp_hyst[nr / 2] = reg;
mutex_unlock(&data->update_lock);
return ret;
}
static ssize_t show_temp_crit(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
return sprintf(buf, "%d\n", data->temp_ovt[nr] * 1000);
}
static ssize_t store_temp_crit(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val /= 1000;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_TEMP_OVT(nr), val);
data->temp_ovt[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
int temp_crit_hyst;
mutex_lock(&data->update_lock);
if (nr & 1)
temp_crit_hyst = data->temp_hyst[nr / 2] >> 4;
else
temp_crit_hyst = data->temp_hyst[nr / 2] & 0x0f;
temp_crit_hyst = (data->temp_ovt[nr] - temp_crit_hyst) * 1000;
mutex_unlock(&data->update_lock);
return sprintf(buf, "%d\n", temp_crit_hyst);
}
static ssize_t show_temp_type(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
return sprintf(buf, "%d\n", data->temp_type[nr]);
}
static ssize_t show_temp_beep(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
if (data->temp_beep & (1 << nr))
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
}
static ssize_t store_temp_beep(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
unsigned long val;
err = strict_strtoul(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP);
if (val)
data->temp_beep |= 1 << nr;
else
data->temp_beep &= ~(1 << nr);
f71882fg_write8(data, F71882FG_REG_TEMP_BEEP, data->temp_beep);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_alarm(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
if (data->temp_status & (1 << nr))
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
}
static ssize_t show_temp_fault(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
if (data->temp_diode_open & (1 << nr))
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
}
static ssize_t show_pwm(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int val, nr = to_sensor_dev_attr_2(devattr)->index;
mutex_lock(&data->update_lock);
if (data->pwm_enable & (1 << (2 * nr)))
/* PWM mode */
val = data->pwm[nr];
else {
/* RPM mode */
val = 255 * fan_from_reg(data->fan_target[nr])
/ fan_from_reg(data->fan_full_speed[nr]);
}
mutex_unlock(&data->update_lock);
return sprintf(buf, "%d\n", val);
}
static ssize_t store_pwm(struct device *dev,
struct device_attribute *devattr, const char *buf,
size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
if ((data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 3) != 2) ||
(data->type != f8000 && !((data->pwm_enable >> 2 * nr) & 2))) {
count = -EROFS;
goto leave;
}
if (data->pwm_enable & (1 << (2 * nr))) {
/* PWM mode */
f71882fg_write8(data, F71882FG_REG_PWM(nr), val);
data->pwm[nr] = val;
} else {
/* RPM mode */
int target, full_speed;
full_speed = f71882fg_read16(data,
F71882FG_REG_FAN_FULL_SPEED(nr));
target = fan_to_reg(val * fan_from_reg(full_speed) / 255);
f71882fg_write16(data, F71882FG_REG_FAN_TARGET(nr), target);
data->fan_target[nr] = target;
data->fan_full_speed[nr] = full_speed;
}
leave:
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_simple_pwm(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int val, nr = to_sensor_dev_attr_2(devattr)->index;
val = data->pwm[nr];
return sprintf(buf, "%d\n", val);
}
static ssize_t store_simple_pwm(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_PWM(nr), val);
data->pwm[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_enable(struct device *dev,
struct device_attribute *devattr, char *buf)
{
int result = 0;
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
switch ((data->pwm_enable >> 2 * nr) & 3) {
case 0:
case 1:
result = 2; /* Normal auto mode */
break;
case 2:
result = 1; /* Manual mode */
break;
case 3:
if (data->type == f8000)
result = 3; /* Thermostat mode */
else
result = 1; /* Manual mode */
break;
}
return sprintf(buf, "%d\n", result);
}
static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
/* Special case for F8000 pwm channel 3 which only does auto mode */
if (data->type == f8000 && nr == 2 && val != 2)
return -EINVAL;
mutex_lock(&data->update_lock);
data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
/* Special case for F8000 auto PWM mode / Thermostat mode */
if (data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 1)) {
switch (val) {
case 2:
data->pwm_enable &= ~(2 << (2 * nr));
break; /* Normal auto mode */
case 3:
data->pwm_enable |= 2 << (2 * nr);
break; /* Thermostat mode */
default:
count = -EINVAL;
goto leave;
}
} else {
switch (val) {
case 1:
/* The f71858fg does not support manual RPM mode */
if (data->type == f71858fg &&
((data->pwm_enable >> (2 * nr)) & 1)) {
count = -EINVAL;
goto leave;
}
data->pwm_enable |= 2 << (2 * nr);
break; /* Manual */
case 2:
data->pwm_enable &= ~(2 << (2 * nr));
break; /* Normal auto mode */
default:
count = -EINVAL;
goto leave;
}
}
f71882fg_write8(data, F71882FG_REG_PWM_ENABLE, data->pwm_enable);
leave:
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_auto_point_pwm(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
int result;
struct f71882fg_data *data = f71882fg_update_device(dev);
int pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
mutex_lock(&data->update_lock);
if (data->pwm_enable & (1 << (2 * pwm))) {
/* PWM mode */
result = data->pwm_auto_point_pwm[pwm][point];
} else {
/* RPM mode */
result = 32 * 255 / (32 + data->pwm_auto_point_pwm[pwm][point]);
}
mutex_unlock(&data->update_lock);
return sprintf(buf, "%d\n", result);
}
static ssize_t store_pwm_auto_point_pwm(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
if (data->pwm_enable & (1 << (2 * pwm))) {
/* PWM mode */
} else {
/* RPM mode */
if (val < 29) /* Prevent negative numbers */
val = 255;
else
val = (255 - val) * 32 / val;
}
f71882fg_write8(data, F71882FG_REG_POINT_PWM(pwm, point), val);
data->pwm_auto_point_pwm[pwm][point] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
int result = 0;
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
mutex_lock(&data->update_lock);
if (nr & 1)
result = data->pwm_auto_point_hyst[nr / 2] >> 4;
else
result = data->pwm_auto_point_hyst[nr / 2] & 0x0f;
result = 1000 * (data->pwm_auto_point_temp[nr][point] - result);
mutex_unlock(&data->update_lock);
return sprintf(buf, "%d\n", result);
}
static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
u8 reg;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val /= 1000;
mutex_lock(&data->update_lock);
data->pwm_auto_point_temp[nr][point] =
f71882fg_read8(data, F71882FG_REG_POINT_TEMP(nr, point));
val = SENSORS_LIMIT(val, data->pwm_auto_point_temp[nr][point] - 15,
data->pwm_auto_point_temp[nr][point]);
val = data->pwm_auto_point_temp[nr][point] - val;
reg = f71882fg_read8(data, F71882FG_REG_FAN_HYST(nr / 2));
if (nr & 1)
reg = (reg & 0x0f) | (val << 4);
else
reg = (reg & 0xf0) | val;
f71882fg_write8(data, F71882FG_REG_FAN_HYST(nr / 2), reg);
data->pwm_auto_point_hyst[nr / 2] = reg;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_interpolate(struct device *dev,
struct device_attribute *devattr, char *buf)
{
int result;
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
result = (data->pwm_auto_point_mapping[nr] >> 4) & 1;
return sprintf(buf, "%d\n", result);
}
static ssize_t store_pwm_interpolate(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
unsigned long val;
err = strict_strtoul(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
data->pwm_auto_point_mapping[nr] =
f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr));
if (val)
val = data->pwm_auto_point_mapping[nr] | (1 << 4);
else
val = data->pwm_auto_point_mapping[nr] & (~(1 << 4));
f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val);
data->pwm_auto_point_mapping[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_auto_point_channel(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
int result;
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) -
data->temp_start);
return sprintf(buf, "%d\n", result);
}
static ssize_t store_pwm_auto_point_channel(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, nr = to_sensor_dev_attr_2(devattr)->index;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
switch (val) {
case 1:
val = 0;
break;
case 2:
val = 1;
break;
case 4:
val = 2;
break;
default:
return -EINVAL;
}
val += data->temp_start;
mutex_lock(&data->update_lock);
data->pwm_auto_point_mapping[nr] =
f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr));
val = (data->pwm_auto_point_mapping[nr] & 0xfc) | val;
f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val);
data->pwm_auto_point_mapping[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_auto_point_temp(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
int result;
struct f71882fg_data *data = f71882fg_update_device(dev);
int pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
result = data->pwm_auto_point_temp[pwm][point];
return sprintf(buf, "%d\n", 1000 * result);
}
static ssize_t store_pwm_auto_point_temp(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int err, pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
long val;
err = strict_strtol(buf, 10, &val);
if (err)
return err;
val /= 1000;
if (data->auto_point_temp_signed)
val = SENSORS_LIMIT(val, -128, 127);
else
val = SENSORS_LIMIT(val, 0, 127);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val);
data->pwm_auto_point_temp[pwm][point] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", f71882fg_names[data->type]);
}
static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev,
struct sensor_device_attribute_2 *attr, int count)
{
int err, i;
for (i = 0; i < count; i++) {
err = device_create_file(&pdev->dev, &attr[i].dev_attr);
if (err)
return err;
}
return 0;
}
static void f71882fg_remove_sysfs_files(struct platform_device *pdev,
struct sensor_device_attribute_2 *attr, int count)
{
int i;
for (i = 0; i < count; i++)
device_remove_file(&pdev->dev, &attr[i].dev_attr);
}
static int __devinit f71882fg_create_fan_sysfs_files(
struct platform_device *pdev, int idx)
{
struct f71882fg_data *data = platform_get_drvdata(pdev);
int err;
/* Sanity check the pwm setting */
err = 0;
switch (data->type) {
case f71858fg:
if (((data->pwm_enable >> (idx * 2)) & 3) == 3)
err = 1;
break;
case f71862fg:
if (((data->pwm_enable >> (idx * 2)) & 1) != 1)
err = 1;
break;
case f8000:
if (idx == 2)
err = data->pwm_enable & 0x20;
break;
default:
break;
}
if (err) {
dev_err(&pdev->dev,
"Invalid (reserved) pwm settings: 0x%02x, "
"skipping fan %d\n",
(data->pwm_enable >> (idx * 2)) & 3, idx + 1);
return 0; /* This is a non fatal condition */
}
err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[idx][0],
ARRAY_SIZE(fxxxx_fan_attr[0]));
if (err)
return err;
if (f71882fg_fan_has_beep[data->type]) {
err = f71882fg_create_sysfs_files(pdev,
&fxxxx_fan_beep_attr[idx],
1);
if (err)
return err;
}
dev_info(&pdev->dev, "Fan: %d is in %s mode\n", idx + 1,
(data->pwm_enable & (1 << (2 * idx))) ? "duty-cycle" : "RPM");
/* Check for unsupported auto pwm settings */
switch (data->type) {
case f71808e:
case f71808a:
case f71869:
case f71869a:
case f71889fg:
case f71889ed:
case f71889a:
data->pwm_auto_point_mapping[idx] =
f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(idx));
if ((data->pwm_auto_point_mapping[idx] & 0x80) ||
(data->pwm_auto_point_mapping[idx] & 3) == 0) {
dev_warn(&pdev->dev,
"Auto pwm controlled by raw digital "
"data, disabling pwm auto_point "
"sysfs attributes for fan %d\n", idx + 1);
return 0; /* This is a non fatal condition */
}
break;
default:
break;
}
switch (data->type) {
case f71862fg:
err = f71882fg_create_sysfs_files(pdev,
&f71862fg_auto_pwm_attr[idx][0],
ARRAY_SIZE(f71862fg_auto_pwm_attr[0]));
break;
case f71808e:
case f71869:
err = f71882fg_create_sysfs_files(pdev,
&f71869_auto_pwm_attr[idx][0],
ARRAY_SIZE(f71869_auto_pwm_attr[0]));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
&f8000_auto_pwm_attr[idx][0],
ARRAY_SIZE(f8000_auto_pwm_attr[0]));
break;
default:
err = f71882fg_create_sysfs_files(pdev,
&fxxxx_auto_pwm_attr[idx][0],
ARRAY_SIZE(fxxxx_auto_pwm_attr[0]));
}
return err;
}
static int __devinit f71882fg_probe(struct platform_device *pdev)
{
struct f71882fg_data *data;
struct f71882fg_sio_data *sio_data = pdev->dev.platform_data;
int nr_fans = f71882fg_nr_fans[sio_data->type];
int nr_temps = f71882fg_nr_temps[sio_data->type];
int err, i;
u8 start_reg, reg;
data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
data->type = sio_data->type;
data->temp_start =
(data->type == f71858fg || data->type == f8000) ? 0 : 1;
mutex_init(&data->update_lock);
platform_set_drvdata(pdev, data);
start_reg = f71882fg_read8(data, F71882FG_REG_START);
if (start_reg & 0x04) {
dev_warn(&pdev->dev, "Hardware monitor is powered down\n");
err = -ENODEV;
goto exit_free;
}
if (!(start_reg & 0x03)) {
dev_warn(&pdev->dev, "Hardware monitoring not activated\n");
err = -ENODEV;
goto exit_free;
}
/* Register sysfs interface files */
err = device_create_file(&pdev->dev, &dev_attr_name);
if (err)
goto exit_unregister_sysfs;
if (start_reg & 0x01) {
switch (data->type) {
case f71858fg:
data->temp_config =
f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);
if (data->temp_config & 0x10)
/* The f71858fg temperature alarms behave as
the f8000 alarms in this mode */
err = f71882fg_create_sysfs_files(pdev,
f8000_temp_attr,
ARRAY_SIZE(f8000_temp_attr));
else
err = f71882fg_create_sysfs_files(pdev,
f71858fg_temp_attr,
ARRAY_SIZE(f71858fg_temp_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
f8000_temp_attr,
ARRAY_SIZE(f8000_temp_attr));
break;
default:
err = f71882fg_create_sysfs_files(pdev,
&fxxxx_temp_attr[0][0],
ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps);
}
if (err)
goto exit_unregister_sysfs;
if (f71882fg_temp_has_beep[data->type]) {
err = f71882fg_create_sysfs_files(pdev,
&fxxxx_temp_beep_attr[0][0],
ARRAY_SIZE(fxxxx_temp_beep_attr[0])
* nr_temps);
if (err)
goto exit_unregister_sysfs;
}
for (i = 0; i < F71882FG_MAX_INS; i++) {
if (f71882fg_has_in[data->type][i]) {
err = device_create_file(&pdev->dev,
&fxxxx_in_attr[i].dev_attr);
if (err)
goto exit_unregister_sysfs;
}
}
if (f71882fg_has_in1_alarm[data->type]) {
err = f71882fg_create_sysfs_files(pdev,
fxxxx_in1_alarm_attr,
ARRAY_SIZE(fxxxx_in1_alarm_attr));
if (err)
goto exit_unregister_sysfs;
}
}
if (start_reg & 0x02) {
switch (data->type) {
case f71808e:
case f71808a:
case f71869:
case f71869a:
/* These always have signed auto point temps */
data->auto_point_temp_signed = 1;
/* Fall through to select correct fan/pwm reg bank! */
case f71889fg:
case f71889ed:
case f71889a:
reg = f71882fg_read8(data, F71882FG_REG_FAN_FAULT_T);
if (reg & F71882FG_FAN_NEG_TEMP_EN)
data->auto_point_temp_signed = 1;
/* Ensure banked pwm registers point to right bank */
reg &= ~F71882FG_FAN_PROG_SEL;
f71882fg_write8(data, F71882FG_REG_FAN_FAULT_T, reg);
break;
default:
break;
}
data->pwm_enable =
f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
for (i = 0; i < nr_fans; i++) {
err = f71882fg_create_fan_sysfs_files(pdev, i);
if (err)
goto exit_unregister_sysfs;
}
/* Some types have 1 extra fan with limited functionality */
switch (data->type) {
case f71808a:
err = f71882fg_create_sysfs_files(pdev,
f71808a_fan3_attr,
ARRAY_SIZE(f71808a_fan3_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
f8000_fan_attr,
ARRAY_SIZE(f8000_fan_attr));
break;
default:
break;
}
if (err)
goto exit_unregister_sysfs;
}
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
data->hwmon_dev = NULL;
goto exit_unregister_sysfs;
}
return 0;
exit_unregister_sysfs:
f71882fg_remove(pdev); /* Will unregister the sysfs files for us */
return err; /* f71882fg_remove() also frees our data */
exit_free:
kfree(data);
return err;
}
static int f71882fg_remove(struct platform_device *pdev)
{
struct f71882fg_data *data = platform_get_drvdata(pdev);
int nr_fans = f71882fg_nr_fans[data->type];
int nr_temps = f71882fg_nr_temps[data->type];
int i;
u8 start_reg = f71882fg_read8(data, F71882FG_REG_START);
if (data->hwmon_dev)
hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&pdev->dev, &dev_attr_name);
if (start_reg & 0x01) {
switch (data->type) {
case f71858fg:
if (data->temp_config & 0x10)
f71882fg_remove_sysfs_files(pdev,
f8000_temp_attr,
ARRAY_SIZE(f8000_temp_attr));
else
f71882fg_remove_sysfs_files(pdev,
f71858fg_temp_attr,
ARRAY_SIZE(f71858fg_temp_attr));
break;
case f8000:
f71882fg_remove_sysfs_files(pdev,
f8000_temp_attr,
ARRAY_SIZE(f8000_temp_attr));
break;
default:
f71882fg_remove_sysfs_files(pdev,
&fxxxx_temp_attr[0][0],
ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps);
}
if (f71882fg_temp_has_beep[data->type]) {
f71882fg_remove_sysfs_files(pdev,
&fxxxx_temp_beep_attr[0][0],
ARRAY_SIZE(fxxxx_temp_beep_attr[0]) * nr_temps);
}
for (i = 0; i < F71882FG_MAX_INS; i++) {
if (f71882fg_has_in[data->type][i]) {
device_remove_file(&pdev->dev,
&fxxxx_in_attr[i].dev_attr);
}
}
if (f71882fg_has_in1_alarm[data->type]) {
f71882fg_remove_sysfs_files(pdev,
fxxxx_in1_alarm_attr,
ARRAY_SIZE(fxxxx_in1_alarm_attr));
}
}
if (start_reg & 0x02) {
f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
if (f71882fg_fan_has_beep[data->type]) {
f71882fg_remove_sysfs_files(pdev,
fxxxx_fan_beep_attr, nr_fans);
}
switch (data->type) {
case f71808a:
f71882fg_remove_sysfs_files(pdev,
&fxxxx_auto_pwm_attr[0][0],
ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
f71882fg_remove_sysfs_files(pdev,
f71808a_fan3_attr,
ARRAY_SIZE(f71808a_fan3_attr));
break;
case f71862fg:
f71882fg_remove_sysfs_files(pdev,
&f71862fg_auto_pwm_attr[0][0],
ARRAY_SIZE(f71862fg_auto_pwm_attr[0]) *
nr_fans);
break;
case f71808e:
case f71869:
f71882fg_remove_sysfs_files(pdev,
&f71869_auto_pwm_attr[0][0],
ARRAY_SIZE(f71869_auto_pwm_attr[0]) * nr_fans);
break;
case f8000:
f71882fg_remove_sysfs_files(pdev,
f8000_fan_attr,
ARRAY_SIZE(f8000_fan_attr));
f71882fg_remove_sysfs_files(pdev,
&f8000_auto_pwm_attr[0][0],
ARRAY_SIZE(f8000_auto_pwm_attr[0]) * nr_fans);
break;
default:
f71882fg_remove_sysfs_files(pdev,
&fxxxx_auto_pwm_attr[0][0],
ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
}
}
platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
static int __init f71882fg_find(int sioaddr, unsigned short *address,
struct f71882fg_sio_data *sio_data)
{
u16 devid;
int err = superio_enter(sioaddr);
if (err)
return err;
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
pr_debug("Not a Fintek device\n");
err = -ENODEV;
goto exit;
}
devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
switch (devid) {
case SIO_F71808E_ID:
sio_data->type = f71808e;
break;
case SIO_F71808A_ID:
sio_data->type = f71808a;
break;
case SIO_F71858_ID:
sio_data->type = f71858fg;
break;
case SIO_F71862_ID:
sio_data->type = f71862fg;
break;
case SIO_F71869_ID:
sio_data->type = f71869;
break;
case SIO_F71869A_ID:
sio_data->type = f71869a;
break;
case SIO_F71882_ID:
sio_data->type = f71882fg;
break;
case SIO_F71889_ID:
sio_data->type = f71889fg;
break;
case SIO_F71889E_ID:
sio_data->type = f71889ed;
break;
case SIO_F71889A_ID:
sio_data->type = f71889a;
break;
case SIO_F8000_ID:
sio_data->type = f8000;
break;
case SIO_F81865_ID:
sio_data->type = f81865f;
break;
default:
pr_info("Unsupported Fintek device: %04x\n",
(unsigned int)devid);
err = -ENODEV;
goto exit;
}
if (sio_data->type == f71858fg)
superio_select(sioaddr, SIO_F71858FG_LD_HWM);
else
superio_select(sioaddr, SIO_F71882FG_LD_HWM);
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
pr_warn("Device not activated\n");
err = -ENODEV;
goto exit;
}
*address = superio_inw(sioaddr, SIO_REG_ADDR);
if (*address == 0) {
pr_warn("Base address not set\n");
err = -ENODEV;
goto exit;
}
*address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
err = 0;
pr_info("Found %s chip at %#x, revision %d\n",
f71882fg_names[sio_data->type], (unsigned int)*address,
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
return err;
}
static int __init f71882fg_device_add(unsigned short address,
const struct f71882fg_sio_data *sio_data)
{
struct resource res = {
.start = address,
.end = address + REGION_LENGTH - 1,
.flags = IORESOURCE_IO,
};
int err;
f71882fg_pdev = platform_device_alloc(DRVNAME, address);
if (!f71882fg_pdev)
return -ENOMEM;
res.name = f71882fg_pdev->name;
err = acpi_check_resource_conflict(&res);
if (err)
goto exit_device_put;
err = platform_device_add_resources(f71882fg_pdev, &res, 1);
if (err) {
pr_err("Device resource addition failed\n");
goto exit_device_put;
}
err = platform_device_add_data(f71882fg_pdev, sio_data,
sizeof(struct f71882fg_sio_data));
if (err) {
pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(f71882fg_pdev);
if (err) {
pr_err("Device addition failed\n");
goto exit_device_put;
}
return 0;
exit_device_put:
platform_device_put(f71882fg_pdev);
return err;
}
static int __init f71882fg_init(void)
{
int err = -ENODEV;
unsigned short address;
struct f71882fg_sio_data sio_data;
memset(&sio_data, 0, sizeof(sio_data));
if (f71882fg_find(0x2e, &address, &sio_data) &&
f71882fg_find(0x4e, &address, &sio_data))
goto exit;
err = platform_driver_register(&f71882fg_driver);
if (err)
goto exit;
err = f71882fg_device_add(address, &sio_data);
if (err)
goto exit_driver;
return 0;
exit_driver:
platform_driver_unregister(&f71882fg_driver);
exit:
return err;
}
static void __exit f71882fg_exit(void)
{
platform_device_unregister(f71882fg_pdev);
platform_driver_unregister(&f71882fg_driver);
}
MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver");
MODULE_AUTHOR("Hans Edgington, Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL");
module_init(f71882fg_init);
module_exit(f71882fg_exit);
[-- Attachment #4: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Fintek F71862FG Super IO Sensors only shows
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
` (7 preceding siblings ...)
2011-09-09 10:12 ` Hans de Goede
@ 2011-09-09 12:12 ` Hans de Goede
8 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2011-09-09 12:12 UTC (permalink / raw)
To: lm-sensors
Hi,
On 09/09/2011 01:46 PM, Daniel Schenkenberger wrote:
> thank u so much. now it seems to work.
> f71862fg-isa-0290
> Adapter: ISA adapter
> in0: +1.66 V
> in1: +1.07 V
> in2: +0.94 V
> in3: +1.08 V
> in4: +0.94 V
> in5: +1.12 V
> in6: +1.56 V
> in7: +1.66 V
> in8: +1.64 V
> fan1: 1355 RPM
> temp1: +46.0°C (high = +75.0°C, hyst = +71.0°C)
> (crit = +100.0°C, hyst = +96.0°C) sensor = transistor
> temp2: FAULT (high = +75.0°C, hyst = +71.0°C)
> (crit = +100.0°C, hyst = +96.0°C) sensor = transistor
> temp3: FAULT (high = +75.0°C, hyst = +73.0°C)
> (crit = +85.0°C, hyst = +83.0°C) sensor = transistor
> but what doest in0-in8 means? i want to read my vcore.
That is more or less unknown to us, it depends on how your motherboard
manufacturer has hooked things up. We do know what in0, 1 and 8 are, as those
are hooked up inside the chip, add the following to your /etc/sensors3.conf
or /etc/sensors.conf (depending on which one you have, if you have both edit
sensors3.conf):
chip "f71862fg-*"
label in0 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
compute in0 @*2, @/2
compute in7 @*2, @/2
compute in8 @*2, @/2
Typically in1 would be your Vcore, but that is far from certain. If your BIOS
has Voltage readings too, you could write them down and compare them.
If a certain reading in your BIOS and under sensors are the same chances
are good they are a match
Note that any readings above 2v are usually scaled and without an sensors.conf entry
you will get the raw value output from the sensors command (and other libsensors
using apps), so in these cases the BIOS readings and sensors output won't match,
the actual factor is not necessarily a whole number like 2 or 3, but could be
almost any value :(
Regards,
Hans
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-09-09 12:12 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-08 13:11 [lm-sensors] Fintek F71862FG Super IO Sensors only shows coretemp Daniel Schenkenberger
2011-09-08 18:07 ` [lm-sensors] Fintek F71862FG Super IO Sensors only shows Hans de Goede
2011-09-08 18:11 ` Guenter Roeck
2011-09-08 20:32 ` Hans de Goede
2011-09-08 20:35 ` Jean Delvare
2011-09-08 20:59 ` Guenter Roeck
2011-09-08 21:02 ` Hans de Goede
2011-09-08 21:09 ` Daniel Schenkenberger
2011-09-09 10:12 ` Hans de Goede
2011-09-09 12:12 ` Hans de Goede
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.