All of lore.kernel.org
 help / color / mirror / Atom feed
* PGRAPH: unsupported chipset
@ 2011-09-12 20:24 wiebittewas
  0 siblings, 0 replies; 3+ messages in thread
From: wiebittewas @ 2011-09-12 20:24 UTC (permalink / raw)
  To: dri-devel

Hi!

here's a latop with a nvidia quadro 1000M, where the nouveau-driver
tells on startup "PGRAPH: unsupported chipset, please report", which
I'll do now. (this list was the only address I've found within the code)

because I haven't found any info, what information I should report, I'll
try it:

a short patch gives, that the requested value would be 0xc1

here's the full lspci-out:
==================================================================
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device
[10de:0dfa] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:14a3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at e8000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at 7000 [size=128]
	Expansion ROM at ed000000 [disabled] [size=512K]
	Capabilities: [60] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<256ns, L1 <4us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
	Capabilities: [b4] Vendor Specific Information: Len=14 <?>
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [128 v1] Power Budgeting <?>
	Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>
	Kernel driver in use: nouveau
	Kernel modules: nouveau, nvidiafb
==================================================================
if you want more information, please tell me, how I'll extract it.

best regards

wiebittewas

^ permalink raw reply	[flat|nested] 3+ messages in thread
* PGRAPH: unsupported chipset
@ 2011-09-12 20:17 wiebittewas
  2011-09-13 17:49 ` Sérgio Basto
  0 siblings, 1 reply; 3+ messages in thread
From: wiebittewas @ 2011-09-12 20:17 UTC (permalink / raw)
  To: dri-devel

Hi!

here's a latop with a nvidia quadro 1000M, where the nouveau-driver
tells on startup "PGRAPH: unsupported chipset, please report", which
I'll do now. (this list was the only address I've found within the code)

because I haven't found any info, what information I should report, I'll
try it:

a short patch gives, that the requested value would be 0xc1

here's the full lspci-out:
==================================================================
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device
[10de:0dfa] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:14a3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at e8000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at 7000 [size=128]
	Expansion ROM at ed000000 [disabled] [size=512K]
	Capabilities: [60] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<256ns, L1 <4us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
	Capabilities: [b4] Vendor Specific Information: Len=14 <?>
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [128 v1] Power Budgeting <?>
	Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>
	Kernel driver in use: nouveau
	Kernel modules: nouveau, nvidiafb
==================================================================
if you want more information, please tell me, how I'll extract it.

best regards

wiebittewas


------------------------------------------------------------------------------
BlackBerry&reg; DevCon Americas, Oct. 18-20, San Francisco, CA
Learn about the latest advances in developing for the 
BlackBerry&reg; mobile platform with sessions, labs & more.
See new tools and technologies. Register for BlackBerry&reg; DevCon today!
http://p.sf.net/sfu/rim-devcon-copy1 
--

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-09-13 17:56 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-12 20:24 PGRAPH: unsupported chipset wiebittewas
  -- strict thread matches above, loose matches on Subject: below --
2011-09-12 20:17 wiebittewas
2011-09-13 17:49 ` Sérgio Basto

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.