From: Gary Thomas <gary@mlbassoc.com>
To: Deepthy Ravi <deepthy.ravi@ti.com>
Cc: laurent.pinchart@ideasonboard.com, mchehab@infradead.org,
tony@atomide.com, hvaibhav@ti.com, linux-media@vger.kernel.org,
linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org,
kyungmin.park@samsung.com, hverkuil@xs4all.nl,
m.szyprowski@samsung.com, g.liakhovetski@gmx.de,
santosh.shilimkar@ti.com, khilman@deeprootsystems.com,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [PATCH v2 0/5] OMAP3EVM: Add support for MT9T111 sensor
Date: Tue, 27 Sep 2011 07:51:18 -0600 [thread overview]
Message-ID: <4E81D4D6.2000000@mlbassoc.com> (raw)
In-Reply-To: <1317130848-21136-1-git-send-email-deepthy.ravi@ti.com>
On 2011-09-27 07:40, Deepthy Ravi wrote:
> This patchset
> -adds support for MT9T111 sensor on omap3evm.
> Currently the sensor driver supports only
> VGA resolution.
> -enables MT9T111 sensor in omap2plus_defconfig.
>
> This is dependent on the following patchset
> http://www.spinics.net/lists/linux-media/msg37270.html
> which adds YUYV input support for OMAP3ISP. And is
> applied on top of rc1-for-3.2 of gliakhovetski/v4l-dvb.git
Why not use the same base as Lennart?
The set is based on
http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-omap3isp-next
> ---
> Changes in v2:
> As per the discussion here,
> https://lkml.org/lkml/2011/9/20/280
> the existing mt9t112 driver is reused for
> adding support for mt9t111 sensor.
> Deepthy Ravi (3):
> [media] v4l: Add support for mt9t111 sensor driver
> ispccdc: Configure CCDC_SYN_MODE register
> omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers
>
> Vaibhav Hiremath (2):
> omap3evm: Enable regulators for camera interface
> omap3evm: Add Camera board init/hookup file
>
> arch/arm/configs/omap2plus_defconfig | 9 +
> arch/arm/mach-omap2/Makefile | 5 +
> arch/arm/mach-omap2/board-omap3evm-camera.c | 185 ++++
> arch/arm/mach-omap2/board-omap3evm.c | 26 +
> drivers/media/video/Kconfig | 7 +
> drivers/media/video/Makefile | 1 +
> drivers/media/video/mt9t111_reg.h | 1367 +++++++++++++++++++++++++++
> drivers/media/video/mt9t112.c | 320 ++++++-
> drivers/media/video/omap3isp/ispccdc.c | 11 +-
> include/media/mt9t111.h | 45 +
> 10 files changed, 1937 insertions(+), 39 deletions(-)
> create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c
> create mode 100644 drivers/media/video/mt9t111_reg.h
> create mode 100644 include/media/mt9t111.h
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
WARNING: multiple messages have this Message-ID (diff)
From: gary@mlbassoc.com (Gary Thomas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] OMAP3EVM: Add support for MT9T111 sensor
Date: Tue, 27 Sep 2011 07:51:18 -0600 [thread overview]
Message-ID: <4E81D4D6.2000000@mlbassoc.com> (raw)
In-Reply-To: <1317130848-21136-1-git-send-email-deepthy.ravi@ti.com>
On 2011-09-27 07:40, Deepthy Ravi wrote:
> This patchset
> -adds support for MT9T111 sensor on omap3evm.
> Currently the sensor driver supports only
> VGA resolution.
> -enables MT9T111 sensor in omap2plus_defconfig.
>
> This is dependent on the following patchset
> http://www.spinics.net/lists/linux-media/msg37270.html
> which adds YUYV input support for OMAP3ISP. And is
> applied on top of rc1-for-3.2 of gliakhovetski/v4l-dvb.git
Why not use the same base as Lennart?
The set is based on
http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-omap3isp-next
> ---
> Changes in v2:
> As per the discussion here,
> https://lkml.org/lkml/2011/9/20/280
> the existing mt9t112 driver is reused for
> adding support for mt9t111 sensor.
> Deepthy Ravi (3):
> [media] v4l: Add support for mt9t111 sensor driver
> ispccdc: Configure CCDC_SYN_MODE register
> omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers
>
> Vaibhav Hiremath (2):
> omap3evm: Enable regulators for camera interface
> omap3evm: Add Camera board init/hookup file
>
> arch/arm/configs/omap2plus_defconfig | 9 +
> arch/arm/mach-omap2/Makefile | 5 +
> arch/arm/mach-omap2/board-omap3evm-camera.c | 185 ++++
> arch/arm/mach-omap2/board-omap3evm.c | 26 +
> drivers/media/video/Kconfig | 7 +
> drivers/media/video/Makefile | 1 +
> drivers/media/video/mt9t111_reg.h | 1367 +++++++++++++++++++++++++++
> drivers/media/video/mt9t112.c | 320 ++++++-
> drivers/media/video/omap3isp/ispccdc.c | 11 +-
> include/media/mt9t111.h | 45 +
> 10 files changed, 1937 insertions(+), 39 deletions(-)
> create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c
> create mode 100644 drivers/media/video/mt9t111_reg.h
> create mode 100644 include/media/mt9t111.h
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2011-09-27 13:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-27 13:40 [PATCH v2 0/5] OMAP3EVM: Add support for MT9T111 sensor Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` [PATCH v2 1/5] omap3evm: Enable regulators for camera interface Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` [PATCH v2 2/5] [media] v4l: Add support for mt9t111 sensor driver Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 23:20 ` Laurent Pinchart
2011-09-27 23:30 ` Guennadi Liakhovetski
2011-09-27 23:30 ` Guennadi Liakhovetski
2011-09-27 13:40 ` [PATCH v2 3/5] omap3evm: Add Camera board init/hookup file Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-29 16:37 ` Tony Lindgren
2011-09-29 16:37 ` Tony Lindgren
2011-09-27 13:40 ` [PATCH v2 4/5] ispccdc: Configure CCDC_SYN_MODE register Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` [PATCH v2 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:40 ` Deepthy Ravi
2011-09-27 13:51 ` Gary Thomas [this message]
2011-09-27 13:51 ` [PATCH v2 0/5] OMAP3EVM: Add support for MT9T111 sensor Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E81D4D6.2000000@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=deepthy.ravi@ti.com \
--cc=g.liakhovetski@gmx.de \
--cc=hvaibhav@ti.com \
--cc=hverkuil@xs4all.nl \
--cc=khilman@deeprootsystems.com \
--cc=kyungmin.park@samsung.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@infradead.org \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.