Re: [Xenomai-help] Command code working with comedi not working with analogy

[Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>]

On 09/27/2011 08:55 PM, Fernando Herrero Carrón wrote:
> Hi all,
> 
> This is my first post to the list. I have been playing around with
> RTAI+Comedi for a while and wanted to give Xenomai+Analogy a chance. I am
> running a linux 2.6.32.20 kernel on an AMD Phenom(tm) II X4 965, with
> Xenomai 2.5.5.2. Xenomai appears to be running fine, analogy recognizes my
> NI 6143 and NI 6713 cards, and "analogy-config" sets things properly up.
> 
> Now I cannot succeed at running any of the "command" functions. The example
> programs "insn_read" and "insn_write" work fine, but "cmd_read" and
> "cmd_write" don't. They fail at "a4l_snd_command".
> 
> I ported an application that is already working with comedi to analogy. My
> question is now whether the same values for the command structures that are
> working on Comedi should work directly with Analogy, because the
> corresponding "a4l_snd_command" is failing with those values, returning a
> value of -22.
> 
> Thank you very much for your help,
> Fernando

Hi,

could you try Xenomai 2.6.0-rc3?

Regards.

-- 
                                                                Gilles.