* [RFCv3 PATCH 2/7] V4L menu: move ISA and parport drivers into their own submenu.
2011-09-30 12:18 ` [RFCv3 PATCH 1/7] V4L menu: move USB drivers section to the top Hans Verkuil
@ 2011-09-30 12:18 ` Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 3/7] V4L menu: remove the EXPERIMENTAL tag from vino and c-qcam Hans Verkuil
` (4 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Hans Verkuil @ 2011-09-30 12:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/video/Kconfig | 102 +++++++++++++++++++++++++------------------
1 files changed, 59 insertions(+), 43 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 0f8ccb4..00b97dd 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -685,49 +685,6 @@ source "drivers/media/video/omap/Kconfig"
source "drivers/media/video/bt8xx/Kconfig"
-config VIDEO_PMS
- tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on ISA && VIDEO_V4L2
- help
- Say Y if you have such a thing.
-
- To compile this driver as a module, choose M here: the
- module will be called pms.
-
-config VIDEO_BWQCAM
- tristate "Quickcam BW Video For Linux"
- depends on PARPORT && VIDEO_V4L2
- help
- Say Y have if you the black and white version of the QuickCam
- camera. See the next option for the color version.
-
- To compile this driver as a module, choose M here: the
- module will be called bw-qcam.
-
-config VIDEO_CQCAM
- tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
- help
- This is the video4linux driver for the colour version of the
- Connectix QuickCam. If you have one of these cameras, say Y here,
- otherwise say N. This driver does not work with the original
- monochrome QuickCam, QuickCam VC or QuickClip. It is also available
- as a module (c-qcam).
- Read <file:Documentation/video4linux/CQcam.txt> for more information.
-
-config VIDEO_W9966
- tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
- help
- Video4linux driver for Winbond's w9966 based Webcams.
- Currently tested with the LifeView FlyCam Supra.
- If you have one of these cameras, say Y here
- otherwise say N.
- This driver is also available as a module (w9966).
-
- Check out <file:Documentation/video4linux/w9966.txt> for more
- information.
-
source "drivers/media/video/cpia2/Kconfig"
config VIDEO_VINO
@@ -817,6 +774,65 @@ source "drivers/media/video/cx18/Kconfig"
source "drivers/media/video/saa7164/Kconfig"
+#
+# ISA & parallel port drivers configuration
+#
+
+menuconfig V4L_ISA_PARPORT_DRIVERS
+ bool "V4L ISA and parallel port devices"
+ depends on ISA || PARPORT
+ default n
+ ---help---
+ Say Y here to enable support for these ISA and parallel port drivers.
+
+if V4L_ISA_PARPORT_DRIVERS
+
+config VIDEO_BWQCAM
+ tristate "Quickcam BW Video For Linux"
+ depends on PARPORT && VIDEO_V4L2
+ help
+ Say Y have if you the black and white version of the QuickCam
+ camera. See the next option for the color version.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bw-qcam.
+
+config VIDEO_CQCAM
+ tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
+ help
+ This is the video4linux driver for the colour version of the
+ Connectix QuickCam. If you have one of these cameras, say Y here,
+ otherwise say N. This driver does not work with the original
+ monochrome QuickCam, QuickCam VC or QuickClip. It is also available
+ as a module (c-qcam).
+ Read <file:Documentation/video4linux/CQcam.txt> for more information.
+
+config VIDEO_PMS
+ tristate "Mediavision Pro Movie Studio Video For Linux"
+ depends on ISA && VIDEO_V4L2
+ help
+ Say Y if you have the ISA Mediavision Pro Movie Studio
+ capture card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pms.
+
+config VIDEO_W9966
+ tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
+ help
+ Video4linux driver for Winbond's w9966 based Webcams.
+ Currently tested with the LifeView FlyCam Supra.
+ If you have one of these cameras, say Y here
+ otherwise say N.
+ This driver is also available as a module (w9966).
+
+ Check out <file:Documentation/video4linux/w9966.txt> for more
+ information.
+
+endif # V4L_ISA_PARPORT_DRIVERS
+
source "drivers/media/video/marvell-ccic/Kconfig"
config VIDEO_M32R_AR
--
1.7.6.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFCv3 PATCH 3/7] V4L menu: remove the EXPERIMENTAL tag from vino and c-qcam.
2011-09-30 12:18 ` [RFCv3 PATCH 1/7] V4L menu: move USB drivers section to the top Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 2/7] V4L menu: move ISA and parport drivers into their own submenu Hans Verkuil
@ 2011-09-30 12:18 ` Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 4/7] V4L menu: move all platform drivers to the bottom of the menu Hans Verkuil
` (3 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Hans Verkuil @ 2011-09-30 12:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
These are really, really old drivers. These are really no longer experimental...
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/video/Kconfig | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 00b97dd..8d1c6cb 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -688,8 +688,8 @@ source "drivers/media/video/bt8xx/Kconfig"
source "drivers/media/video/cpia2/Kconfig"
config VIDEO_VINO
- tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
+ tristate "SGI Vino Video For Linux"
+ depends on I2C && SGI_IP22 && VIDEO_V4L2
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
help
Say Y here to build in support for the Vino video input system found
@@ -798,8 +798,8 @@ config VIDEO_BWQCAM
module will be called bw-qcam.
config VIDEO_CQCAM
- tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
+ tristate "QuickCam Colour Video For Linux"
+ depends on PARPORT && VIDEO_V4L2
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
--
1.7.6.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFCv3 PATCH 4/7] V4L menu: move all platform drivers to the bottom of the menu.
2011-09-30 12:18 ` [RFCv3 PATCH 1/7] V4L menu: move USB drivers section to the top Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 2/7] V4L menu: move ISA and parport drivers into their own submenu Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 3/7] V4L menu: remove the EXPERIMENTAL tag from vino and c-qcam Hans Verkuil
@ 2011-09-30 12:18 ` Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 5/7] V4L menu: remove duplicate USB dependency Hans Verkuil
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Hans Verkuil @ 2011-09-30 12:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/video/Kconfig | 106 ++++++++++++++++++++++---------------------
1 files changed, 55 insertions(+), 51 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 8d1c6cb..f059eed 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -646,25 +646,6 @@ config USB_S2255
endif # V4L_USB_DRIVERS
-config VIDEO_SH_VOU
- tristate "SuperH VOU video output driver"
- depends on VIDEO_DEV && ARCH_SHMOBILE
- select VIDEOBUF_DMA_CONTIG
- help
- Support for the Video Output Unit (VOU) on SuperH SoCs.
-
-config VIDEO_VIU
- tristate "Freescale VIU Video Driver"
- depends on VIDEO_V4L2 && PPC_MPC512x
- select VIDEOBUF_DMA_CONTIG
- default y
- ---help---
- Support for Freescale VIU video driver. This device captures
- video data, or overlays video on DIU frame buffer.
-
- Say Y here if you want to enable VIU device on MPC5121e Rev2+.
- In doubt, say N.
-
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
@@ -679,22 +660,10 @@ config VIDEO_VIVI
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
-source "drivers/media/video/davinci/Kconfig"
-
-source "drivers/media/video/omap/Kconfig"
-
source "drivers/media/video/bt8xx/Kconfig"
source "drivers/media/video/cpia2/Kconfig"
-config VIDEO_VINO
- tristate "SGI Vino Video For Linux"
- depends on I2C && SGI_IP22 && VIDEO_V4L2
- select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
- help
- Say Y here to build in support for the Vino video input system found
- on SGI Indy machines.
-
source "drivers/media/video/zoran/Kconfig"
config VIDEO_MEYE
@@ -752,16 +721,6 @@ config VIDEO_HEXIUM_GEMINI
To compile this driver as a module, choose M here: the
module will be called hexium_gemini.
-config VIDEO_TIMBERDALE
- tristate "Support for timberdale Video In/LogiWIN"
- depends on VIDEO_V4L2 && I2C && DMADEVICES
- select DMA_ENGINE
- select TIMB_DMA
- select VIDEO_ADV7180
- select VIDEOBUF_DMA_CONTIG
- ---help---
- Add support for the Video In peripherial of the timberdale FPGA.
-
source "drivers/media/video/cx88/Kconfig"
source "drivers/media/video/cx23885/Kconfig"
@@ -835,6 +794,61 @@ endif # V4L_ISA_PARPORT_DRIVERS
source "drivers/media/video/marvell-ccic/Kconfig"
+config VIDEO_VIA_CAMERA
+ tristate "VIAFB camera controller support"
+ depends on FB_VIA
+ select VIDEOBUF_DMA_SG
+ select VIDEO_OV7670
+ help
+ Driver support for the integrated camera controller in VIA
+ Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
+ with ov7670 sensors.
+
+#
+# Platform multimedia device configuration
+#
+
+source "drivers/media/video/davinci/Kconfig"
+
+source "drivers/media/video/omap/Kconfig"
+
+config VIDEO_SH_VOU
+ tristate "SuperH VOU video output driver"
+ depends on VIDEO_DEV && ARCH_SHMOBILE
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for the Video Output Unit (VOU) on SuperH SoCs.
+
+config VIDEO_VIU
+ tristate "Freescale VIU Video Driver"
+ depends on VIDEO_V4L2 && PPC_MPC512x
+ select VIDEOBUF_DMA_CONTIG
+ default y
+ ---help---
+ Support for Freescale VIU video driver. This device captures
+ video data, or overlays video on DIU frame buffer.
+
+ Say Y here if you want to enable VIU device on MPC5121e Rev2+.
+ In doubt, say N.
+
+config VIDEO_TIMBERDALE
+ tristate "Support for timberdale Video In/LogiWIN"
+ depends on VIDEO_V4L2 && I2C && DMADEVICES
+ select DMA_ENGINE
+ select TIMB_DMA
+ select VIDEO_ADV7180
+ select VIDEOBUF_DMA_CONTIG
+ ---help---
+ Add support for the Video In peripherial of the timberdale FPGA.
+
+config VIDEO_VINO
+ tristate "SGI Vino Video For Linux"
+ depends on I2C && SGI_IP22 && VIDEO_V4L2
+ select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
+ help
+ Say Y here to build in support for the Vino video input system found
+ on SGI Indy machines.
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L2
@@ -854,16 +868,6 @@ config VIDEO_M32R_AR_M64278
To compile this driver as a module, choose M here: the
module will be called arv.
-config VIDEO_VIA_CAMERA
- tristate "VIAFB camera controller support"
- depends on FB_VIA
- select VIDEOBUF_DMA_SG
- select VIDEO_OV7670
- help
- Driver support for the integrated camera controller in VIA
- Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
- with ov7670 sensors.
-
config VIDEO_OMAP3
tristate "OMAP 3 Camera support (EXPERIMENTAL)"
select OMAP_IOMMU
--
1.7.6.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFCv3 PATCH 5/7] V4L menu: remove duplicate USB dependency.
2011-09-30 12:18 ` [RFCv3 PATCH 1/7] V4L menu: move USB drivers section to the top Hans Verkuil
` (2 preceding siblings ...)
2011-09-30 12:18 ` [RFCv3 PATCH 4/7] V4L menu: move all platform drivers to the bottom of the menu Hans Verkuil
@ 2011-09-30 12:18 ` Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 6/7] V4L menu: reorganize the radio menu Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 7/7] V4L menu: move all PCI(e) devices to their own submenu Hans Verkuil
5 siblings, 0 replies; 10+ messages in thread
From: Hans Verkuil @ 2011-09-30 12:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for pointing this
out to me.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/video/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f059eed..399804f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -582,7 +582,7 @@ menuconfig V4L_USB_DRIVERS
depends on USB
default y
-if V4L_USB_DRIVERS && USB
+if V4L_USB_DRIVERS
source "drivers/media/video/uvc/Kconfig"
--
1.7.6.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFCv3 PATCH 6/7] V4L menu: reorganize the radio menu.
2011-09-30 12:18 ` [RFCv3 PATCH 1/7] V4L menu: move USB drivers section to the top Hans Verkuil
` (3 preceding siblings ...)
2011-09-30 12:18 ` [RFCv3 PATCH 5/7] V4L menu: remove duplicate USB dependency Hans Verkuil
@ 2011-09-30 12:18 ` Hans Verkuil
2011-09-30 12:18 ` [RFCv3 PATCH 7/7] V4L menu: move all PCI(e) devices to their own submenu Hans Verkuil
5 siblings, 0 replies; 10+ messages in thread
From: Hans Verkuil @ 2011-09-30 12:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Move all USB radio devices to the top of the list and move all ISA
devices to a separate menu.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/radio/Kconfig | 298 +++++++++++++++++++++++--------------------
1 files changed, 157 insertions(+), 141 deletions(-)
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 52798a1..e954781 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -11,6 +11,162 @@ menuconfig RADIO_ADAPTERS
if RADIO_ADAPTERS && VIDEO_V4L2
+config RADIO_SI470X
+ bool "Silicon Labs Si470x FM Radio Receiver support"
+ depends on VIDEO_V4L2
+
+source "drivers/media/radio/si470x/Kconfig"
+
+config USB_MR800
+ tristate "AverMedia MR 800 USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-mr800.
+
+config USB_DSBR
+ tristate "D-Link/GemTek USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+
+config RADIO_MAXIRADIO
+ tristate "Guillemot MAXI Radio FM 2000 radio"
+ depends on VIDEO_V4L2 && PCI
+ ---help---
+ Choose Y here if you have this radio card. This card may also be
+ found as Gemtek PCI FM.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-maxiradio.
+
+
+config I2C_SI4713
+ tristate "I2C driver for Silicon Labs Si4713 device"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want support to Si4713 I2C device.
+ This device driver supports only i2c bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si4713.
+
+config RADIO_SI4713
+ tristate "Silicon Labs Si4713 FM Radio Transmitter support"
+ depends on I2C && VIDEO_V4L2
+ select I2C_SI4713
+ ---help---
+ Say Y here if you want support to Si4713 FM Radio Transmitter.
+ This device can transmit audio through FM. It can transmit
+ RDS and RBDS signals as well. This module is the v4l2 radio
+ interface for the i2c driver of this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-si4713.
+
+config RADIO_TEA5764
+ tristate "TEA5764 I2C FM radio support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEA5764 FM chip found in
+ EZX phones. This FM chip is present in EZX phones from Motorola,
+ connected to internal pxa I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-tea5764.
+
+config RADIO_TEA5764_XTAL
+ bool "TEA5764 crystal reference"
+ depends on RADIO_TEA5764=y
+ default y
+ help
+ Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
+ here if TEA5764 reference frequency is connected in FREQIN.
+
+config RADIO_SAA7706H
+ tristate "SAA7706H Car Radio DSP"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the SAA7706H Car radio Digital
+ Signal Processor, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called SAA7706H.
+
+config RADIO_TEF6862
+ tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEF6862 Car Radio Enhanced
+ Selectivity Tuner, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called TEF6862.
+
+config RADIO_TIMBERDALE
+ tristate "Enable the Timberdale radio driver"
+ depends on MFD_TIMBERDALE && VIDEO_V4L2
+ depends on I2C # for RADIO_SAA7706H
+ select RADIO_TEF6862
+ select RADIO_SAA7706H
+ ---help---
+ This is a kind of umbrella driver for the Radio Tuner and DSP
+ found behind the Timberdale FPGA on the Russellville board.
+ Enabling this driver will automatically select the DSP and tuner.
+
+config RADIO_WL1273
+ tristate "Texas Instruments WL1273 I2C FM Radio"
+ depends on I2C && VIDEO_V4L2
+ select MFD_CORE
+ select MFD_WL1273_CORE
+ select FW_LOADER
+ ---help---
+ Choose Y here if you have this FM radio chip.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux 2 API. Information on
+ this API and pointers to "v4l2" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-wl1273.
+
+# TI's ST based wl128x FM radio
+source "drivers/media/radio/wl128x/Kconfig"
+
+#
+# ISA drivers configuration
+#
+
+menuconfig V4L_RADIO_ISA_DRIVERS
+ bool "ISA radio devices"
+ depends on ISA
+ default n
+ ---help---
+ Say Y here to enable support for these ISA drivers.
+
+if V4L_RADIO_ISA_DRIVERS
+
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
depends on ISA && VIDEO_V4L2
@@ -151,21 +307,6 @@ config RADIO_GEMTEK_PROBE
following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
0x28c.
-config RADIO_MAXIRADIO
- tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_V4L2 && PCI
- ---help---
- Choose Y here if you have this radio card. This card may also be
- found as Gemtek PCI FM.
-
- In order to control your radio card, you will need to use programs
- that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-maxiradio.
-
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
@@ -316,131 +457,6 @@ config RADIO_ZOLTRIX_PORT
help
Enter the I/O port of your Zoltrix radio card.
-config I2C_SI4713
- tristate "I2C driver for Silicon Labs Si4713 device"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want support to Si4713 I2C device.
- This device driver supports only i2c bus.
-
- To compile this driver as a module, choose M here: the
- module will be called si4713.
-
-config RADIO_SI4713
- tristate "Silicon Labs Si4713 FM Radio Transmitter support"
- depends on I2C && VIDEO_V4L2
- select I2C_SI4713
- ---help---
- Say Y here if you want support to Si4713 FM Radio Transmitter.
- This device can transmit audio through FM. It can transmit
- RDS and RBDS signals as well. This module is the v4l2 radio
- interface for the i2c driver of this device.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-si4713.
-
-config USB_DSBR
- tristate "D-Link/GemTek USB FM radio support"
- depends on USB && VIDEO_V4L2
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
-config RADIO_SI470X
- bool "Silicon Labs Si470x FM Radio Receiver support"
- depends on VIDEO_V4L2
-
-source "drivers/media/radio/si470x/Kconfig"
-
-config USB_MR800
- tristate "AverMedia MR 800 USB FM radio support"
- depends on USB && VIDEO_V4L2
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-mr800.
-
-config RADIO_TEA5764
- tristate "TEA5764 I2C FM radio support"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want to use the TEA5764 FM chip found in
- EZX phones. This FM chip is present in EZX phones from Motorola,
- connected to internal pxa I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-tea5764.
-
-config RADIO_TEA5764_XTAL
- bool "TEA5764 crystal reference"
- depends on RADIO_TEA5764=y
- default y
- help
- Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
- here if TEA5764 reference frequency is connected in FREQIN.
-
-config RADIO_SAA7706H
- tristate "SAA7706H Car Radio DSP"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want to use the SAA7706H Car radio Digital
- Signal Processor, found for instance on the Russellville development
- board. On the russellville the device is connected to internal
- timberdale I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called SAA7706H.
-
-config RADIO_TEF6862
- tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want to use the TEF6862 Car Radio Enhanced
- Selectivity Tuner, found for instance on the Russellville development
- board. On the russellville the device is connected to internal
- timberdale I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called TEF6862.
-
-config RADIO_TIMBERDALE
- tristate "Enable the Timberdale radio driver"
- depends on MFD_TIMBERDALE && VIDEO_V4L2
- depends on I2C # for RADIO_SAA7706H
- select RADIO_TEF6862
- select RADIO_SAA7706H
- ---help---
- This is a kind of umbrella driver for the Radio Tuner and DSP
- found behind the Timberdale FPGA on the Russellville board.
- Enabling this driver will automatically select the DSP and tuner.
-
-config RADIO_WL1273
- tristate "Texas Instruments WL1273 I2C FM Radio"
- depends on I2C && VIDEO_V4L2
- select MFD_CORE
- select MFD_WL1273_CORE
- select FW_LOADER
- ---help---
- Choose Y here if you have this FM radio chip.
-
- In order to control your radio card, you will need to use programs
- that are compatible with the Video For Linux 2 API. Information on
- this API and pointers to "v4l2" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-wl1273.
-
-# TI's ST based wl128x FM radio
-source "drivers/media/radio/wl128x/Kconfig"
+endif # V4L_RADIO_ISA_DRIVERS
endif # RADIO_ADAPTERS
--
1.7.6.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFCv3 PATCH 7/7] V4L menu: move all PCI(e) devices to their own submenu.
2011-09-30 12:18 ` [RFCv3 PATCH 1/7] V4L menu: move USB drivers section to the top Hans Verkuil
` (4 preceding siblings ...)
2011-09-30 12:18 ` [RFCv3 PATCH 6/7] V4L menu: reorganize the radio menu Hans Verkuil
@ 2011-09-30 12:18 ` Hans Verkuil
2011-09-30 13:46 ` Mauro Carvalho Chehab
5 siblings, 1 reply; 10+ messages in thread
From: Hans Verkuil @ 2011-09-30 12:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/video/Kconfig | 109 ++++++++++++++++++++++++------------------
1 files changed, 62 insertions(+), 47 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 399804f..a2ccf78 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -573,6 +573,20 @@ config VIDEO_M52790
endmenu # encoder / decoder chips
+config VIDEO_VIVI
+ tristate "Virtual Video Driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ select FONT_8x16
+ select VIDEOBUF2_VMALLOC
+ default n
+ ---help---
+ Enables a virtual video driver. This device shows a color bar
+ and a timestamp, as a real device would generate by using V4L2
+ api.
+ Say Y here if you want to test video apps or debug V4L devices.
+ In doubt, say N.
+
#
# USB Multimedia device configuration
#
@@ -608,6 +622,8 @@ source "drivers/media/video/sn9c102/Kconfig"
source "drivers/media/video/pwc/Kconfig"
+source "drivers/media/video/cpia2/Kconfig"
+
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
@@ -646,25 +662,53 @@ config USB_S2255
endif # V4L_USB_DRIVERS
-config VIDEO_VIVI
- tristate "Virtual Video Driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
- depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
- select FONT_8x16
- select VIDEOBUF2_VMALLOC
- default n
+#
+# PCI drivers configuration
+#
+
+menuconfig V4L_PCI_DRIVERS
+ bool "V4L PCI(e) devices"
+ depends on PCI
+ default y
---help---
- Enables a virtual video driver. This device shows a color bar
- and a timestamp, as a real device would generate by using V4L2
- api.
- Say Y here if you want to test video apps or debug V4L devices.
- In doubt, say N.
+ Say Y here to enable support for these PCI(e) drivers.
+
+if V4L_PCI_DRIVERS
+
+source "drivers/media/video/au0828/Kconfig"
source "drivers/media/video/bt8xx/Kconfig"
-source "drivers/media/video/cpia2/Kconfig"
+source "drivers/media/video/cx18/Kconfig"
-source "drivers/media/video/zoran/Kconfig"
+source "drivers/media/video/cx23885/Kconfig"
+
+source "drivers/media/video/cx88/Kconfig"
+
+config VIDEO_HEXIUM_GEMINI
+ tristate "Hexium Gemini frame grabber"
+ depends on PCI && VIDEO_V4L2 && I2C
+ select VIDEO_SAA7146_VV
+ ---help---
+ This is a video4linux driver for the Hexium Gemini frame
+ grabber card by Hexium. Please note that the Gemini Dual
+ card is *not* fully supported.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hexium_gemini.
+
+config VIDEO_HEXIUM_ORION
+ tristate "Hexium HV-PCI6 and Orion frame grabber"
+ depends on PCI && VIDEO_V4L2 && I2C
+ select VIDEO_SAA7146_VV
+ ---help---
+ This is a video4linux driver for the Hexium HV-PCI6 and
+ Orion frame grabber cards by Hexium.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hexium_orion.
+
+source "drivers/media/video/ivtv/Kconfig"
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
@@ -680,8 +724,6 @@ config VIDEO_MEYE
To compile this driver as a module, choose M here: the
module will be called meye.
-source "drivers/media/video/saa7134/Kconfig"
-
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
depends on PCI && VIDEO_V4L2 && I2C
@@ -698,40 +740,13 @@ config VIDEO_MXB
To compile this driver as a module, choose M here: the
module will be called mxb.
-config VIDEO_HEXIUM_ORION
- tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on PCI && VIDEO_V4L2 && I2C
- select VIDEO_SAA7146_VV
- ---help---
- This is a video4linux driver for the Hexium HV-PCI6 and
- Orion frame grabber cards by Hexium.
-
- To compile this driver as a module, choose M here: the
- module will be called hexium_orion.
-
-config VIDEO_HEXIUM_GEMINI
- tristate "Hexium Gemini frame grabber"
- depends on PCI && VIDEO_V4L2 && I2C
- select VIDEO_SAA7146_VV
- ---help---
- This is a video4linux driver for the Hexium Gemini frame
- grabber card by Hexium. Please note that the Gemini Dual
- card is *not* fully supported.
-
- To compile this driver as a module, choose M here: the
- module will be called hexium_gemini.
-
-source "drivers/media/video/cx88/Kconfig"
-
-source "drivers/media/video/cx23885/Kconfig"
-
-source "drivers/media/video/au0828/Kconfig"
+source "drivers/media/video/saa7134/Kconfig"
-source "drivers/media/video/ivtv/Kconfig"
+source "drivers/media/video/saa7164/Kconfig"
-source "drivers/media/video/cx18/Kconfig"
+source "drivers/media/video/zoran/Kconfig"
-source "drivers/media/video/saa7164/Kconfig"
+endif # V4L_PCI_DRIVERS
#
# ISA & parallel port drivers configuration
--
1.7.6.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [RFCv3 PATCH 7/7] V4L menu: move all PCI(e) devices to their own submenu.
2011-09-30 12:18 ` [RFCv3 PATCH 7/7] V4L menu: move all PCI(e) devices to their own submenu Hans Verkuil
@ 2011-09-30 13:46 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 10+ messages in thread
From: Mauro Carvalho Chehab @ 2011-09-30 13:46 UTC (permalink / raw)
To: Hans Verkuil; +Cc: linux-media, Hans Verkuil
Em 30-09-2011 09:18, Hans Verkuil escreveu:
> From: Hans Verkuil <hans.verkuil@cisco.com>
>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
> drivers/media/video/Kconfig | 109 ++++++++++++++++++++++++------------------
> 1 files changed, 62 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index 399804f..a2ccf78 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -573,6 +573,20 @@ config VIDEO_M52790
>
> endmenu # encoder / decoder chips
>
> +config VIDEO_VIVI
> + tristate "Virtual Video Driver"
> + depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
> + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
> + select FONT_8x16
> + select VIDEOBUF2_VMALLOC
> + default n
> + ---help---
> + Enables a virtual video driver. This device shows a color bar
> + and a timestamp, as a real device would generate by using V4L2
> + api.
> + Say Y here if you want to test video apps or debug V4L devices.
> + In doubt, say N.
> +
> #
> # USB Multimedia device configuration
> #
> @@ -608,6 +622,8 @@ source "drivers/media/video/sn9c102/Kconfig"
>
> source "drivers/media/video/pwc/Kconfig"
>
> +source "drivers/media/video/cpia2/Kconfig"
> +
> config USB_ZR364XX
> tristate "USB ZR364XX Camera support"
> depends on VIDEO_V4L2
> @@ -646,25 +662,53 @@ config USB_S2255
>
> endif # V4L_USB_DRIVERS
>
> -config VIDEO_VIVI
> - tristate "Virtual Video Driver"
> - depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
> - depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
> - select FONT_8x16
> - select VIDEOBUF2_VMALLOC
> - default n
> +#
> +# PCI drivers configuration
> +#
> +
> +menuconfig V4L_PCI_DRIVERS
> + bool "V4L PCI(e) devices"
> + depends on PCI
> + default y
> ---help---
> - Enables a virtual video driver. This device shows a color bar
> - and a timestamp, as a real device would generate by using V4L2
> - api.
> - Say Y here if you want to test video apps or debug V4L devices.
> - In doubt, say N.
> + Say Y here to enable support for these PCI(e) drivers.
s/these//
Btw, I also liked Stephan suggestion of saying that this won't actually add any
code to the Kernel. So, the final comment will probably be something like:
Say Y to enable support for PCI(e) drivers.
This option alone does not add any kernel code.
If you say N, all PCI(e) media drivers will be skipped and disabled.
> +
> +if V4L_PCI_DRIVERS
> +
> +source "drivers/media/video/au0828/Kconfig"
>
> source "drivers/media/video/bt8xx/Kconfig"
>
> -source "drivers/media/video/cpia2/Kconfig"
> +source "drivers/media/video/cx18/Kconfig"
>
> -source "drivers/media/video/zoran/Kconfig"
> +source "drivers/media/video/cx23885/Kconfig"
> +
> +source "drivers/media/video/cx88/Kconfig"
> +
> +config VIDEO_HEXIUM_GEMINI
> + tristate "Hexium Gemini frame grabber"
> + depends on PCI && VIDEO_V4L2 && I2C
> + select VIDEO_SAA7146_VV
> + ---help---
> + This is a video4linux driver for the Hexium Gemini frame
> + grabber card by Hexium. Please note that the Gemini Dual
> + card is *not* fully supported.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called hexium_gemini.
> +
> +config VIDEO_HEXIUM_ORION
> + tristate "Hexium HV-PCI6 and Orion frame grabber"
> + depends on PCI && VIDEO_V4L2 && I2C
> + select VIDEO_SAA7146_VV
> + ---help---
> + This is a video4linux driver for the Hexium HV-PCI6 and
> + Orion frame grabber cards by Hexium.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called hexium_orion.
> +
> +source "drivers/media/video/ivtv/Kconfig"
>
> config VIDEO_MEYE
> tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
> @@ -680,8 +724,6 @@ config VIDEO_MEYE
> To compile this driver as a module, choose M here: the
> module will be called meye.
>
> -source "drivers/media/video/saa7134/Kconfig"
> -
> config VIDEO_MXB
> tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
> depends on PCI && VIDEO_V4L2 && I2C
> @@ -698,40 +740,13 @@ config VIDEO_MXB
> To compile this driver as a module, choose M here: the
> module will be called mxb.
>
> -config VIDEO_HEXIUM_ORION
> - tristate "Hexium HV-PCI6 and Orion frame grabber"
> - depends on PCI && VIDEO_V4L2 && I2C
> - select VIDEO_SAA7146_VV
> - ---help---
> - This is a video4linux driver for the Hexium HV-PCI6 and
> - Orion frame grabber cards by Hexium.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called hexium_orion.
> -
> -config VIDEO_HEXIUM_GEMINI
> - tristate "Hexium Gemini frame grabber"
> - depends on PCI && VIDEO_V4L2 && I2C
> - select VIDEO_SAA7146_VV
> - ---help---
> - This is a video4linux driver for the Hexium Gemini frame
> - grabber card by Hexium. Please note that the Gemini Dual
> - card is *not* fully supported.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called hexium_gemini.
> -
> -source "drivers/media/video/cx88/Kconfig"
> -
> -source "drivers/media/video/cx23885/Kconfig"
> -
> -source "drivers/media/video/au0828/Kconfig"
> +source "drivers/media/video/saa7134/Kconfig"
>
> -source "drivers/media/video/ivtv/Kconfig"
> +source "drivers/media/video/saa7164/Kconfig"
>
> -source "drivers/media/video/cx18/Kconfig"
> +source "drivers/media/video/zoran/Kconfig"
>
> -source "drivers/media/video/saa7164/Kconfig"
> +endif # V4L_PCI_DRIVERS
>
> #
> # ISA & parallel port drivers configuration
^ permalink raw reply [flat|nested] 10+ messages in thread