From: Jeff Garzik <jgarzik@pobox.com>
To: Richard Zhu <richard.zhu@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de,
linux-ide@vger.kernel.org, avorontsov@ru.mvista.com,
eric@eukrea.com, eric.miao@linaro.org
Subject: Re: [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features
Date: Thu, 06 Oct 2011 02:22:01 -0400 [thread overview]
Message-ID: <4E8D4909.9030603@pobox.com> (raw)
In-Reply-To: <1317195717-21174-3-git-send-email-richard.zhu@linaro.org>
On 09/28/2011 03:41 AM, Richard Zhu wrote:
> On imx53 AHCI, soft reset fails with IPMS set when PMP
> is enabled but SATA HDD/ODD is connected to SATA port,
> do soft reset again to port 0.
> So the 'ahci_pmp_retry_srst_ops' is required when imx53
> ahci is present.
>
> Signed-off-by: Richard Zhu<richard.zhu@linaro.org>
> Acked-by: Eric Miao<eric.miao@linaro.org>
> ---
> drivers/ata/ahci_platform.c | 44 +++++++++++++++++++++++++++++++++++++-----
> 1 files changed, 38 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 6fef1fa..c03277d 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -23,6 +23,41 @@
> #include<linux/ahci_platform.h>
> #include "ahci.h"
>
> +enum ahci_type {
> + AHCI, /* standard platform ahci */
> + IMX53_AHCI, /* ahci on i.mx53 */
> +};
> +
> +static struct platform_device_id ahci_devtype[] = {
> + {
> + .name = "ahci",
> + .driver_data = AHCI,
> + }, {
> + .name = "imx53-ahci",
> + .driver_data = IMX53_AHCI,
> + }, {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(platform, ahci_devtype);
> +
> +
> +static const struct ata_port_info ahci_port_info[] = {
> + /* by features */
> + [AHCI] = {
> + .flags = AHCI_FLAG_COMMON,
> + .pio_mask = ATA_PIO4,
> + .udma_mask = ATA_UDMA6,
> + .port_ops =&ahci_ops,
> + },
> + [IMX53_AHCI] = {
> + .flags = AHCI_FLAG_COMMON,
> + .pio_mask = ATA_PIO4,
> + .udma_mask = ATA_UDMA6,
> + .port_ops =&ahci_pmp_retry_srst_ops,
> + },
> +};
> +
> static struct scsi_host_template ahci_platform_sht = {
> AHCI_SHT("ahci_platform"),
> };
> @@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev)
> {
> struct device *dev =&pdev->dev;
> struct ahci_platform_data *pdata = dev->platform_data;
> - struct ata_port_info pi = {
> - .flags = AHCI_FLAG_COMMON,
> - .pio_mask = ATA_PIO4,
> - .udma_mask = ATA_UDMA6,
> - .port_ops =&ahci_ops,
> - };
> + const struct platform_device_id *id = platform_get_device_id(pdev);
> + struct ata_port_info pi = ahci_port_info[id->driver_data];
> const struct ata_port_info *ppi[] = {&pi, NULL };
> struct ahci_host_priv *hpriv;
> struct ata_host *host;
> @@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = {
> .name = "ahci",
> .owner = THIS_MODULE,
> },
> + .id_table = ahci_devtype,
> };
Looks good... I queued this one.
Jeff
WARNING: multiple messages have this Message-ID (diff)
From: jgarzik@pobox.com (Jeff Garzik)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features
Date: Thu, 06 Oct 2011 02:22:01 -0400 [thread overview]
Message-ID: <4E8D4909.9030603@pobox.com> (raw)
In-Reply-To: <1317195717-21174-3-git-send-email-richard.zhu@linaro.org>
On 09/28/2011 03:41 AM, Richard Zhu wrote:
> On imx53 AHCI, soft reset fails with IPMS set when PMP
> is enabled but SATA HDD/ODD is connected to SATA port,
> do soft reset again to port 0.
> So the 'ahci_pmp_retry_srst_ops' is required when imx53
> ahci is present.
>
> Signed-off-by: Richard Zhu<richard.zhu@linaro.org>
> Acked-by: Eric Miao<eric.miao@linaro.org>
> ---
> drivers/ata/ahci_platform.c | 44 +++++++++++++++++++++++++++++++++++++-----
> 1 files changed, 38 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 6fef1fa..c03277d 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -23,6 +23,41 @@
> #include<linux/ahci_platform.h>
> #include "ahci.h"
>
> +enum ahci_type {
> + AHCI, /* standard platform ahci */
> + IMX53_AHCI, /* ahci on i.mx53 */
> +};
> +
> +static struct platform_device_id ahci_devtype[] = {
> + {
> + .name = "ahci",
> + .driver_data = AHCI,
> + }, {
> + .name = "imx53-ahci",
> + .driver_data = IMX53_AHCI,
> + }, {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(platform, ahci_devtype);
> +
> +
> +static const struct ata_port_info ahci_port_info[] = {
> + /* by features */
> + [AHCI] = {
> + .flags = AHCI_FLAG_COMMON,
> + .pio_mask = ATA_PIO4,
> + .udma_mask = ATA_UDMA6,
> + .port_ops =&ahci_ops,
> + },
> + [IMX53_AHCI] = {
> + .flags = AHCI_FLAG_COMMON,
> + .pio_mask = ATA_PIO4,
> + .udma_mask = ATA_UDMA6,
> + .port_ops =&ahci_pmp_retry_srst_ops,
> + },
> +};
> +
> static struct scsi_host_template ahci_platform_sht = {
> AHCI_SHT("ahci_platform"),
> };
> @@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev)
> {
> struct device *dev =&pdev->dev;
> struct ahci_platform_data *pdata = dev->platform_data;
> - struct ata_port_info pi = {
> - .flags = AHCI_FLAG_COMMON,
> - .pio_mask = ATA_PIO4,
> - .udma_mask = ATA_UDMA6,
> - .port_ops =&ahci_ops,
> - };
> + const struct platform_device_id *id = platform_get_device_id(pdev);
> + struct ata_port_info pi = ahci_port_info[id->driver_data];
> const struct ata_port_info *ppi[] = {&pi, NULL };
> struct ahci_host_priv *hpriv;
> struct ata_host *host;
> @@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = {
> .name = "ahci",
> .owner = THIS_MODULE,
> },
> + .id_table = ahci_devtype,
> };
Looks good... I queued this one.
Jeff
next prev parent reply other threads:[~2011-10-06 6:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-28 7:41 [PATCH V9 0/5] imx53 ahci driver v9 Richard Zhu
2011-09-28 7:41 ` Richard Zhu
2011-09-28 7:41 ` [PATCH V9 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms Richard Zhu
2011-09-28 7:41 ` Richard Zhu
2011-09-28 7:41 ` [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features Richard Zhu
2011-09-28 7:41 ` Richard Zhu
2011-10-06 6:22 ` Jeff Garzik [this message]
2011-10-06 6:22 ` Jeff Garzik
2011-10-07 12:44 ` Sascha Hauer
2011-10-07 12:44 ` Sascha Hauer
2011-09-28 7:41 ` [PATCH V9 3/5] MX53 Enable the AHCI SATA on MX53 ARD board Richard Zhu
2011-09-28 7:41 ` Richard Zhu
2011-09-28 7:41 ` [PATCH V9 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board Richard Zhu
2011-09-28 7:41 ` Richard Zhu
2011-09-28 7:41 ` [PATCH V9 5/5] MX53 Enable the AHCI SATA on MX53 SMD board Richard Zhu
2011-09-28 7:41 ` Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E8D4909.9030603@pobox.com \
--to=jgarzik@pobox.com \
--cc=avorontsov@ru.mvista.com \
--cc=eric.miao@linaro.org \
--cc=eric@eukrea.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=richard.zhu@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.