From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] sam9g45: add trng clock and platform device
Date: Fri, 07 Oct 2011 12:09:55 +0200 [thread overview]
Message-ID: <4E8ECFF3.7010305@atmel.com> (raw)
In-Reply-To: <1317915694-27564-1-git-send-email-jacmet@sunsite.dk>
On 10/06/2011 05:41 PM, Peter Korsgaard :
> For the new hw_random driver.
>
> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
I add it to at91-l2 and at91-next branches of:
git://github.com/at91linux/linux-at91.git
Thanks,
> ---
> arch/arm/mach-at91/at91sam9g45.c | 7 +++++++
> arch/arm/mach-at91/at91sam9g45_devices.c | 29 +++++++++++++++++++++++++++++
> 2 files changed, 36 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
> index 6da8ace..6850f1d 100644
> --- a/arch/arm/mach-at91/at91sam9g45.c
> +++ b/arch/arm/mach-at91/at91sam9g45.c
> @@ -54,6 +54,11 @@ static struct clk pioDE_clk = {
> .pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
> .type = CLK_TYPE_PERIPHERAL,
> };
> +static struct clk trng_clk = {
> + .name = "trng_clk",
> + .pmc_mask = 1 << AT91SAM9G45_ID_TRNG,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> static struct clk usart0_clk = {
> .name = "usart0_clk",
> .pmc_mask = 1 << AT91SAM9G45_ID_US0,
> @@ -177,6 +182,7 @@ static struct clk *periph_clocks[] __initdata = {
> &pioB_clk,
> &pioC_clk,
> &pioDE_clk,
> + &trng_clk,
> &usart0_clk,
> &usart1_clk,
> &usart2_clk,
> @@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
> CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
> CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
> + CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
> /* fake hclk clock */
> CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
> };
> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
> index 2ee20bd..1ca6c62 100644
> --- a/arch/arm/mach-at91/at91sam9g45_devices.c
> +++ b/arch/arm/mach-at91/at91sam9g45_devices.c
> @@ -1101,6 +1101,34 @@ static void __init at91_add_device_rtt(void)
>
>
> /* --------------------------------------------------------------------
> + * TRNG
> + * -------------------------------------------------------------------- */
> +
> +#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
> +static struct resource trng_resources[] = {
> + {
> + .start = AT91SAM9G45_BASE_TRNG,
> + .end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> +};
> +
> +static struct platform_device at91sam9g45_trng_device = {
> + .name = "atmel-trng",
> + .id = -1,
> + .resource = trng_resources,
> + .num_resources = ARRAY_SIZE(trng_resources),
> +};
> +
> +static void __init at91_add_device_trng(void)
> +{
> + platform_device_register(&at91sam9g45_trng_device);
> +}
> +#else
> +static void __init at91_add_device_trng(void) {}
> +#endif
> +
> +/* --------------------------------------------------------------------
> * Watchdog
> * -------------------------------------------------------------------- */
>
> @@ -1589,6 +1617,7 @@ static int __init at91_add_standard_devices(void)
> at91_add_device_hdmac();
> at91_add_device_rtc();
> at91_add_device_rtt();
> + at91_add_device_trng();
> at91_add_device_watchdog();
> at91_add_device_tc();
> return 0;
--
Nicolas Ferre
prev parent reply other threads:[~2011-10-07 10:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-06 15:41 [PATCH 1/2] sam9g45: add trng clock and platform device Peter Korsgaard
2011-10-06 15:41 ` [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator Peter Korsgaard
2011-10-06 15:49 ` Mark Brown
2011-10-06 15:55 ` Peter Korsgaard
2011-10-06 16:02 ` Jamie Iles
2011-10-06 17:53 ` Peter Korsgaard
2011-10-07 10:09 ` Nicolas Ferre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E8ECFF3.7010305@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.