[PATCH V2] AT91: dt: at91sam9g45 family and board device tree files

[nicolas.ferre@atmel.com (Nicolas Ferre)]

On 10/05/2011 03:00 PM, Rob Herring :
> Nicolas,
> 
> On 10/03/2011 05:00 AM, Nicolas Ferre wrote:
>> Create a new device tree source file for Atmel at91sam9g45 SoC family.
>> The Evaluation Kit at91sam9m10g45ek includes it.
>> This first basic support will be populated as drivers and boards will be
>> converted to device tree.
>> Contains serial, dma and interrupt controllers.
>>
>> The generic board file still takes advantage of platform data for early serial
>> init. As we need a storage media and the NAND flash driver is not converted to
>> DT yet, we keep old initialization for it.
>>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>> V2: foundation for AT91SAM generic support
>> - device tree focused board file
>> - inclusion of USART DT support
>> - early USART and NAND still using platform data
>>
>>  arch/arm/boot/dts/at91sam9g45.dtsi       |  103 +++++++++++++++++++++++++
>>  arch/arm/boot/dts/at91sam9m10g45ek.dts   |   37 +++++++++
>>  arch/arm/mach-at91/Kconfig               |   11 +++
>>  arch/arm/mach-at91/Makefile              |    3 +
>>  arch/arm/mach-at91/Makefile.boot         |    2 +
>>  arch/arm/mach-at91/at91sam9g45_devices.c |   24 +++++--
>>  arch/arm/mach-at91/board-dt.c            |  122 ++++++++++++++++++++++++++++++
>>  7 files changed, 296 insertions(+), 6 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/at91sam9g45.dtsi
>>  create mode 100644 arch/arm/boot/dts/at91sam9m10g45ek.dts
>>  create mode 100644 arch/arm/mach-at91/board-dt.c
>>
>> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
>> new file mode 100644
>> index 0000000..7d3341f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
>> @@ -0,0 +1,103 @@
>> +/*
>> + * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
>> + *                    applies to AT91SAM9G45, AT91SAM9M10,
>> + *                    AT91SAM9G46, AT91SAM9M11 SoC
>> + *
>> + *  Copyright (C) 2011 Atmel,
>> + *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
>> + *
>> + * Licensed under GPLv2 or later.
>> + */
>> +
>> +/include/ "skeleton.dtsi"
>> +
>> +/ {
>> +	model = "Atmel AT91SAM9G45 family SoC";
>> +	compatible = "atmel,at91sam9g45";
>> +	interrupt-parent = <&aic>;
>> +
>> +	aliases {
>> +		serial0 = &dbgu;
>> +		serial1 = &usart0;
>> +		serial2 = &usart1;
>> +		serial3 = &usart2;
>> +		serial4 = &usart3;
>> +	};
>> +	cpus {
>> +		cpu at 0 {
>> +			compatible = "arm,arm926ejs";
>> +		};
>> +	};
>> +
>> +	memory {
> 
> Should be memory at 0x70000000
> 
>> +		reg = <0x70000000 0x10000000>;
>> +	};
>> +
>> +	ahb {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		apb {
>> +			compatible = "simple-bus";
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			ranges;
>> +
>> +			aic: interrupt-controller at fffff000 {
>> +				#interrupt-cells = <1>;
>> +				compatible = "atmel,at91rm9200-aic";
>> +				interrupt-controller;
> 
> Add "interrupt-parent;" so that the aic is not the parent of itself.
> 
>> +				reg = <0xfffff000 0x200>;
>> +			};
>> +
>> +			dma: dma-controller at ffffec00 {
>> +				compatible = "atmel,at91sam9g45-hdmac";
>> +				reg = <0xffffec00 0x200>;
>> +				interrupts = <21>;
>> +				atmel,hdmac-nr-channels = <8>;
>> +				atmel,hdmac-cap-memcpy;
>> +				atmel,hdmac-cap-slave;
>> +			};
>> +
>> +			dbgu: serial at ffffee00 {
>> +				compatible = "atmel,at91sam9260-usart";
>> +				reg = <0xffffee00 0x200>;
>> +				interrupts = <1>;
>> +			};
>> +
>> +			usart0: serial at fff8c000 {
>> +				compatible = "atmel,at91sam9260-usart";
>> +				reg = <0xfff8c000 0x4000>;
> 
> Is 16K really used? I would set to 4K so your not wasting virtual space
> (probably not an issue yet on Atmel parts).

Yes, I can adapt this value to the real size of register bank. The
memory map on the datasheet is not precise about this and I have to
refer to the IP documentation itself. But anyway, if it has an interest,
I can adapt this to real values.

>> +				interrupts = <7>;
>> +				atmel,use-dma-rx;
>> +				atmel,use-dma-tx;
>> +			};
>> +
>> +			usart1: serial at fff90000 {
>> +				compatible = "atmel,at91sam9260-usart";
>> +				reg = <0xfff90000 0x4000>;
>> +				interrupts = <8>;
>> +				atmel,use-dma-rx;
>> +				atmel,use-dma-tx;
>> +			};
>> +
>> +			usart2: serial at fff94000 {
>> +				compatible = "atmel,at91sam9260-usart";
>> +				reg = <0xfff94000 0x4000>;
>> +				interrupts = <9>;
>> +				atmel,use-dma-rx;
>> +				atmel,use-dma-tx;
>> +			};
>> +
>> +			usart3: serial at fff98000 {
>> +				compatible = "atmel,at91sam9260-usart";
>> +				reg = <0xfff98000 0x4000>;
>> +				interrupts = <10>;
>> +				atmel,use-dma-rx;
>> +				atmel,use-dma-tx;
>> +			};
>> +		};
>> +	};
>> +};
>> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> new file mode 100644
>> index 0000000..cf743de
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> @@ -0,0 +1,37 @@
>> +/*
>> + * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
>> + *
>> + *  Copyright (C) 2011 Atmel,
>> + *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
>> + *
>> + * Licensed under GPLv2 or later.
>> + */
>> +/dts-v1/;
>> +/include/ "at91sam9g45.dtsi"
>> +
>> +/ {
>> +	model = "Atmel AT91SAM9M10G45-EK";
>> +	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
>> +
>> +	chosen {
>> +		bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
>> +	};
>> +
>> +	memory {
>> +		reg = <0x70000000 0x4000000>;
>> +	};
>> +
>> +	ahb {
>> +		apb {
>> +			usart0: serial at fff8c000 {
>> +				status = "disabled";
>> +			};
>> +			usart2: serial at fff94000 {
>> +				status = "disabled";
>> +			};
>> +			usart3: serial at fff98000 {
>> +				status = "disabled";
>> +			};
>> +		};
>> +	};
>> +};
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index 2248467..4b59d96 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -442,6 +442,17 @@ endif
>>  
>>  # ----------------------------------------------------------
>>  
>> +comment "Generic Board Type"
>> +
>> +config MACH_AT91SAM_DT
>> +	bool "Atmel AT91SAM Evaluation Kits with device-tree support"
>> +	select USE_OF
>> +	help
>> +	  Select this if you want to experiment device-tree with
>> +	  an Atmel Evaluation Kit.
>> +
>> +# ----------------------------------------------------------
>> +
>>  comment "AT91 Board Options"
>>  
>>  config MTD_AT91_DATAFLASH_CARD
>> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
>> index bf57e8b..3ff245e 100644
>> --- a/arch/arm/mach-at91/Makefile
>> +++ b/arch/arm/mach-at91/Makefile
>> @@ -74,6 +74,9 @@ obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
>>  # AT91SAM9G45 board-specific support
>>  obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
>>  
>> +# AT91SAM board with device-tree
>> +obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
>> +
>>  # AT91CAP9 board-specific support
>>  obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
>>  
>> diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
>> index 3462b81..d278863 100644
>> --- a/arch/arm/mach-at91/Makefile.boot
>> +++ b/arch/arm/mach-at91/Makefile.boot
>> @@ -16,3 +16,5 @@ else
>>  params_phys-y	:= 0x20000100
>>  initrd_phys-y	:= 0x20410000
>>  endif
>> +
>> +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
>> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
>> index bb84040..27276b8 100644
>> --- a/arch/arm/mach-at91/at91sam9g45_devices.c
>> +++ b/arch/arm/mach-at91/at91sam9g45_devices.c
>> @@ -69,9 +69,16 @@ static struct platform_device at_hdmac_device = {
>>  
>>  void __init at91_add_device_hdmac(void)
>>  {
>> -	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
>> -	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
>> -	platform_device_register(&at_hdmac_device);
>> +	struct device_node *of_node =
>> +		of_find_node_by_name(NULL, "dma-controller");
> 
> You should really search by the compatible string.
> 
>> +
>> +	if (of_node) {
>> +		of_node_put(of_node);
>> +	} else {
>> +		dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
>> +		dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
> 
> This really should be in the driver.

Yes, I will try to find a way to get rid of those platform data.

>> +		platform_device_register(&at_hdmac_device);
>> +	}
>>  }
>>  #else
>>  void __init at91_add_device_hdmac(void) {}
>> @@ -1556,10 +1563,15 @@ void __init at91_set_serial_console(unsigned portnr)
>>  void __init at91_add_device_serial(void)
>>  {
>>  	int i;
>> +	struct device_node *of_node = of_find_node_by_name(NULL, "serial");
>>  
>> -	for (i = 0; i < ATMEL_MAX_UART; i++) {
>> -		if (at91_uarts[i])
>> -			platform_device_register(at91_uarts[i]);
>> +	if (of_node) {
>> +		of_node_put(of_node);
>> +	} else {
>> +		for (i = 0; i < ATMEL_MAX_UART; i++) {
>> +			if (at91_uarts[i])
>> +				platform_device_register(at91_uarts[i]);
>> +		}
> 
> Why can't you only call these init functions when booting non-DT?

For the dma driver function: this init function is called as an
arch_initcall().
But for the 91_add_device_serial() function, I can simply avoid calling
it, like you suggest.


>>  	}
>>  
>>  	if (!atmel_default_console_device)
>> diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
>> new file mode 100644
>> index 0000000..7bcb9a9
>> --- /dev/null
>> +++ b/arch/arm/mach-at91/board-dt.c
>> @@ -0,0 +1,122 @@
>> +/*
>> + *  Setup code for AT91SAM Evaluation Kits with Device Tree support
>> + *
>> + *  Covers: * AT91SAM9G45-EKES  board
>> + *          * AT91SAM9M10-EKES  board
>> + *          * AT91SAM9M10G45-EK board
>> + *
>> + *  Copyright (C) 2011 Atmel,
>> + *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
>> + *
>> + * Licensed under GPLv2 or later.
>> + */
>> +
>> +#include <linux/types.h>
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include <mach/hardware.h>
>> +#include <mach/board.h>
>> +#include <mach/gpio.h>
>> +#include <mach/system_rev.h>
>> +#include <mach/at91sam9_smc.h>
>> +
>> +#include <asm/setup.h>
>> +#include <asm/irq.h>
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach/map.h>
>> +#include <asm/mach/irq.h>
>> +
>> +#include "sam9_smc.h"
>> +#include "generic.h"
>> +
>> +
>> +static void __init ek_init_early(void)
>> +{
>> +	/* Initialize processor: 12.000 MHz crystal */
>> +	at91_initialize(12000000);
>> +
>> +	/* DGBU on ttyS0. (Rx & Tx only) */
>> +	at91_register_uart(0, 0, 0);
>> +
>> +	/* USART0 not connected on the -EK board */
>> +	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
>> +	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
>> +
>> +	/* set serial console to ttyS0 (ie, DBGU) */
>> +	at91_set_serial_console(0);
>> +}
>> +
>> +/* det_pin is not connected */
>> +static struct atmel_nand_data __initdata ek_nand_data = {
>> +	.ale		= 21,
>> +	.cle		= 22,
>> +	.rdy_pin	= AT91_PIN_PC8,
>> +	.enable_pin	= AT91_PIN_PC14,
>> +};
>> +
>> +static struct sam9_smc_config __initdata ek_nand_smc_config = {
>> +	.ncs_read_setup		= 0,
>> +	.nrd_setup		= 2,
>> +	.ncs_write_setup	= 0,
>> +	.nwe_setup		= 2,
>> +
>> +	.ncs_read_pulse		= 4,
>> +	.nrd_pulse		= 4,
>> +	.ncs_write_pulse	= 4,
>> +	.nwe_pulse		= 4,
>> +
>> +	.read_cycle		= 7,
>> +	.write_cycle		= 7,
>> +
>> +	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
>> +	.tdf_cycles		= 3,
>> +};
>> +
>> +static void __init ek_add_device_nand(void)
>> +{
>> +	ek_nand_data.bus_width_16 = board_have_nand_16bit();
>> +	/* setup bus-width (8 or 16) */
>> +	if (ek_nand_data.bus_width_16)
>> +		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
>> +	else
>> +		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
>> +
>> +	/* configure chip-select 3 (NAND) */
>> +	sam9_smc_configure(3, &ek_nand_smc_config);
>> +
>> +	at91_add_device_nand(&ek_nand_data);
>> +}
>> +
>> +static const struct of_device_id aic_of_match[] __initconst = {
>> +	{ .compatible = "atmel,at91rm9200-aic", },
>> +	{},
>> +};
>> +
>> +static void __init at91_dt_device_init(void)
>> +{
>> +	irq_domain_generate_simple(aic_of_match, 0xfffff000, 0);
> 
> Why is this not in the .init_irq function? I'm surprised your timer
> interrupt even works.

Ok, I will add an .init_irq function in my v3 patch.

BTW, as I am a little bit confused about the "early" serial
initialization, what is the proper way to address this?
So, can you tell me or give me a pointer to an update on this topic: I
know that it is moving a lot those days...

Thanks a lot for your review.
Best regards,
-- 
Nicolas Ferre