* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
@ 2011-10-07 16:06 Kumar Gala
2011-10-09 18:34 ` Wolfgang Denk
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-07 16:06 UTC (permalink / raw)
To: u-boot
The following changes since commit 08e4f700ac450ddc5d4819e23df5bc46eb767464:
Marek Vasut (1):
SPL: Make path to start.S configurable
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx master
Andy Fleming (1):
phylib: Work around bug in Teranetics PHY
Becky Bruce (2):
powerpc/mpc8641hpcn: fix SRIO BAT config
powerpc/mpc86xx: Disable translation for BAT setup
Fanzc (1):
powerpc/mpc8536ds: Add USB support for MPC8536DS
Tang Yuantian (1):
fsl_sata: Fix compile error when CONFIG_LBA48 is not defined
Timur Tabi (2):
powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BIT
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY
Xie Xiaobo (3):
powerpc/mpc8536ds: Add eSPI support for MPC8536DS
powerpc/mpc8536ds: Invert SDHC_WP pin polarity
powerpc/mpc8536ds: Save the env variables to SDcard and SPI flash
York Sun (2):
powerpc/8xxx: Add support for interactive DDR programming interface
powerpc/mpc8xxx: Merge entries in DDR speed table
chenhui zhao (1):
powerpc/mpc8548cds: Update config file
README | 3 +
arch/powerpc/cpu/mpc86xx/cpu_init.c | 28 -
arch/powerpc/cpu/mpc86xx/start.S | 69 ++-
arch/powerpc/cpu/mpc8xxx/ddr/Makefile | 3 +-
arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 40 +-
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 1691 ++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 9 +-
arch/powerpc/include/asm/fsl_fman.h | 9 +-
arch/powerpc/include/asm/immap_85xx.h | 5 +
board/freescale/corenet_ds/ddr.c | 222 ++--
board/freescale/mpc8349emds/ddr.c | 80 +-
board/freescale/mpc8536ds/mpc8536ds.c | 12 +-
board/freescale/mpc8572ds/ddr.c | 203 ++--
board/freescale/mpc8641hpcn/ddr.c | 165 ++--
board/freescale/p1022ds/ddr.c | 79 +-
board/freescale/p2020ds/ddr.c | 105 +-
board/freescale/p2041rdb/ddr.c | 78 +-
doc/README.fsl-ddr | 150 +++
drivers/block/fsl_sata.c | 15 +-
drivers/net/fm/dtsec.c | 2 +-
drivers/net/fm/eth.c | 3 +-
drivers/net/phy/teranetics.c | 21 +-
include/configs/MPC8536DS.h | 51 +-
include/configs/MPC8548CDS.h | 16 +-
include/configs/MPC8641HPCN.h | 128 ++-
include/configs/P1022DS.h | 3 +-
include/configs/p1_p2_rdb_pc.h | 5 +-
include/mpc86xx.h | 1 +
28 files changed, 2611 insertions(+), 585 deletions(-)
create mode 100644 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-07 16:06 Kumar Gala
@ 2011-10-09 18:34 ` Wolfgang Denk
2011-10-09 22:48 ` Kumar Gala
0 siblings, 1 reply; 19+ messages in thread
From: Wolfgang Denk @ 2011-10-09 18:34 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1110071105270.5883@right.am.freescale.net> you wrote:
> The following changes since commit 08e4f700ac450ddc5d4819e23df5bc46eb767464:
> Marek Vasut (1):
> SPL: Make path to start.S configurable
>
> are available in the git repository at:
> git://git.denx.de/u-boot-mpc85xx master
>
> Andy Fleming (1):
> phylib: Work around bug in Teranetics PHY
>
> Becky Bruce (2):
> powerpc/mpc8641hpcn: fix SRIO BAT config
> powerpc/mpc86xx: Disable translation for BAT setup
>
> Fanzc (1):
> powerpc/mpc8536ds: Add USB support for MPC8536DS
>
> Tang Yuantian (1):
> fsl_sata: Fix compile error when CONFIG_LBA48 is not defined
>
> Timur Tabi (2):
> powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BIT
> powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY
>
> Xie Xiaobo (3):
> powerpc/mpc8536ds: Add eSPI support for MPC8536DS
> powerpc/mpc8536ds: Invert SDHC_WP pin polarity
> powerpc/mpc8536ds: Save the env variables to SDcard and SPI flash
>
> York Sun (2):
> powerpc/8xxx: Add support for interactive DDR programming interface
> powerpc/mpc8xxx: Merge entries in DDR speed table
>
> chenhui zhao (1):
> powerpc/mpc8548cds: Update config file
This commit was rejected. I will not pull that.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The White Rabbit put on his spectacles. "Where shall I begin, please
your Majesty ?" he asked.
"Begin at the beginning,", the King said, very gravely, "and go on
till you come to the end: then stop." -- Lewis Carroll
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-09 18:34 ` Wolfgang Denk
@ 2011-10-09 22:48 ` Kumar Gala
0 siblings, 0 replies; 19+ messages in thread
From: Kumar Gala @ 2011-10-09 22:48 UTC (permalink / raw)
To: u-boot
On Oct 9, 2011, at 1:34 PM, Wolfgang Denk wrote:
> Dear Kumar Gala,
>
> In message <alpine.LFD.2.00.1110071105270.5883@right.am.freescale.net> you wrote:
>> The following changes since commit 08e4f700ac450ddc5d4819e23df5bc46eb767464:
>> Marek Vasut (1):
>> SPL: Make path to start.S configurable
>>
>> are available in the git repository at:
>> git://git.denx.de/u-boot-mpc85xx master
>>
>> Andy Fleming (1):
>> phylib: Work around bug in Teranetics PHY
>>
>> Becky Bruce (2):
>> powerpc/mpc8641hpcn: fix SRIO BAT config
>> powerpc/mpc86xx: Disable translation for BAT setup
>>
>> Fanzc (1):
>> powerpc/mpc8536ds: Add USB support for MPC8536DS
>>
>> Tang Yuantian (1):
>> fsl_sata: Fix compile error when CONFIG_LBA48 is not defined
>>
>> Timur Tabi (2):
>> powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BIT
>> powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY
>>
>> Xie Xiaobo (3):
>> powerpc/mpc8536ds: Add eSPI support for MPC8536DS
>> powerpc/mpc8536ds: Invert SDHC_WP pin polarity
>> powerpc/mpc8536ds: Save the env variables to SDcard and SPI flash
>>
>> York Sun (2):
>> powerpc/8xxx: Add support for interactive DDR programming interface
>> powerpc/mpc8xxx: Merge entries in DDR speed table
>>
>> chenhui zhao (1):
>> powerpc/mpc8548cds: Update config file
>
> This commit was rejected. I will not pull that.
Rejected how? I saw the checkpatch comments, reviewed and disagree with it. I think there should be some maintainer purview here.
- k
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
@ 2011-10-14 7:34 Kumar Gala
2011-10-14 19:15 ` Tabi Timur-B04825
2011-10-15 19:59 ` Wolfgang Denk
0 siblings, 2 replies; 19+ messages in thread
From: Kumar Gala @ 2011-10-14 7:34 UTC (permalink / raw)
To: u-boot
The following changes since commit d8fffa057c9430fd0c5104ab6ff7db4cdb03db51:
Merge branch 'master' of git://git.denx.de/u-boot-mips (2011-10-12 22:47:15 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx master
Haiying Wang (3):
powerpc/p5020: fixup portal config info
powerpc/p2041: fixup portal config info
powerpc/p3041: fixup portal config info
Kuldip Giroh (1):
powerpc/85xx: Added secure boot option for P2041RDB boards
Kumar Gala (1):
powerpc/85xx: Drop CONFIG_VIDEO on P1_P2_RDB-PC boards to reduce size
Timur Tabi (2):
powerpc/p3060: remove all references to RCW bits EC1_EXT, EC2_EXT, and EC3
phylib: wait for TN2020 to achieve SERDES lane alignment at startup
chenhui zhao (2):
powerpc/mpc8548cds: Code cleanup and refactoring
powerpc/mpc8548cds: Add 36-bit support
arch/powerpc/cpu/mpc85xx/p2041_ids.c | 20 +++---
arch/powerpc/cpu/mpc85xx/p3041_ids.c | 20 +++---
arch/powerpc/cpu/mpc85xx/p3060_serdes.c | 20 -----
arch/powerpc/cpu/mpc85xx/p5020_ids.c | 20 +++---
arch/powerpc/include/asm/immap_85xx.h | 10 ---
board/freescale/mpc8548cds/law.c | 31 +-------
board/freescale/mpc8548cds/mpc8548cds.c | 8 +-
board/freescale/mpc8548cds/tlb.c | 64 ++++++++--------
boards.cfg | 2 +
drivers/net/fm/p3060.c | 17 ----
drivers/net/phy/teranetics.c | 33 ++++++++
include/configs/MPC8548CDS.h | 125 +++++++++++++++++++++++--------
include/configs/p1_p2_rdb_pc.h | 16 ----
13 files changed, 196 insertions(+), 190 deletions(-)
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-14 7:34 [U-Boot] [GIT PULL] Pull request u-boot-85xx.git Kumar Gala
@ 2011-10-14 19:15 ` Tabi Timur-B04825
2011-10-14 20:27 ` Kumar Gala
2011-10-15 19:59 ` Wolfgang Denk
1 sibling, 1 reply; 19+ messages in thread
From: Tabi Timur-B04825 @ 2011-10-14 19:15 UTC (permalink / raw)
To: u-boot
On Fri, Oct 14, 2011 at 2:34 AM, Kumar Gala <galak@kernel.crashing.org> wrote:
> The following changes since commit d8fffa057c9430fd0c5104ab6ff7db4cdb03db51:
>
> ?Merge branch 'master' of git://git.denx.de/u-boot-mips (2011-10-12 22:47:15 +0200)
>
> are available in the git repository at:
>
> ?git://git.denx.de/u-boot-mpc85xx master
Can you pick up this patch, as well:
http://patchwork.ozlabs.org/patch/109631/
It fixes a real bug.
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-14 19:15 ` Tabi Timur-B04825
@ 2011-10-14 20:27 ` Kumar Gala
2011-10-14 20:29 ` Timur Tabi
2011-10-14 21:34 ` Wolfgang Denk
0 siblings, 2 replies; 19+ messages in thread
From: Kumar Gala @ 2011-10-14 20:27 UTC (permalink / raw)
To: u-boot
On Oct 14, 2011, at 2:15 PM, Tabi Timur-B04825 wrote:
> On Fri, Oct 14, 2011 at 2:34 AM, Kumar Gala <galak@kernel.crashing.org> wrote:
>> The following changes since commit d8fffa057c9430fd0c5104ab6ff7db4cdb03db51:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-mips (2011-10-12 22:47:15 +0200)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mpc85xx master
>
> Can you pick up this patch, as well:
>
> http://patchwork.ozlabs.org/patch/109631/
>
> It fixes a real bug.
Need Wolfgang's Ack on that.
- k
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-14 20:27 ` Kumar Gala
@ 2011-10-14 20:29 ` Timur Tabi
2011-10-14 20:31 ` Kumar Gala
2011-10-14 21:34 ` Wolfgang Denk
1 sibling, 1 reply; 19+ messages in thread
From: Timur Tabi @ 2011-10-14 20:29 UTC (permalink / raw)
To: u-boot
Kumar Gala wrote:
> Need Wolfgang's Ack on that.
Why? It just fixes a bug in our board code.
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-14 20:29 ` Timur Tabi
@ 2011-10-14 20:31 ` Kumar Gala
2011-10-14 20:37 ` Timur Tabi
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-14 20:31 UTC (permalink / raw)
To: u-boot
On Oct 14, 2011, at 3:29 PM, Timur Tabi wrote:
> Kumar Gala wrote:
>> Need Wolfgang's Ack on that.
>
> Why? It just fixes a bug in our board code.
But it touches common/cmd_mac.c
- k
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-14 20:31 ` Kumar Gala
@ 2011-10-14 20:37 ` Timur Tabi
0 siblings, 0 replies; 19+ messages in thread
From: Timur Tabi @ 2011-10-14 20:37 UTC (permalink / raw)
To: u-boot
Kumar Gala wrote:
> But it touches common/cmd_mac.c
I've never understand why that file is in common/, since it applies only to
Freescale SOCs. There's only one implementation of do_mac, and it's ours.
I could have sworn York posted a patch to move do_mac into sys_eeprom.c. I
don't see it anywhere, though.
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-14 20:27 ` Kumar Gala
2011-10-14 20:29 ` Timur Tabi
@ 2011-10-14 21:34 ` Wolfgang Denk
1 sibling, 0 replies; 19+ messages in thread
From: Wolfgang Denk @ 2011-10-14 21:34 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <0C0B0795-E6C4-4D6D-A067-BC22FFA98C75@kernel.crashing.org> you wrote:
>
> > Can you pick up this patch, as well:
> >
> > http://patchwork.ozlabs.org/patch/109631/
> >
> > It fixes a real bug.
>
> Need Wolfgang's Ack on that.
Sorry for the late review; I see issues with this patch. No ACK as is.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wenn Du ein' weise Antwort verlangst, Mu?t Du vern?nftig fragen.
-- Goethe, Invektiven
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-14 7:34 [U-Boot] [GIT PULL] Pull request u-boot-85xx.git Kumar Gala
2011-10-14 19:15 ` Tabi Timur-B04825
@ 2011-10-15 19:59 ` Wolfgang Denk
1 sibling, 0 replies; 19+ messages in thread
From: Wolfgang Denk @ 2011-10-15 19:59 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1110140233570.16644@right.am.freescale.net> you wrote:
> The following changes since commit d8fffa057c9430fd0c5104ab6ff7db4cdb03db51:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mips (2011-10-12 22:47:15 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx master
>
> Haiying Wang (3):
> powerpc/p5020: fixup portal config info
> powerpc/p2041: fixup portal config info
> powerpc/p3041: fixup portal config info
>
> Kuldip Giroh (1):
> powerpc/85xx: Added secure boot option for P2041RDB boards
>
> Kumar Gala (1):
> powerpc/85xx: Drop CONFIG_VIDEO on P1_P2_RDB-PC boards to reduce size
>
> Timur Tabi (2):
> powerpc/p3060: remove all references to RCW bits EC1_EXT, EC2_EXT, and EC3
> phylib: wait for TN2020 to achieve SERDES lane alignment at startup
>
> chenhui zhao (2):
> powerpc/mpc8548cds: Code cleanup and refactoring
> powerpc/mpc8548cds: Add 36-bit support
>
> arch/powerpc/cpu/mpc85xx/p2041_ids.c | 20 +++---
> arch/powerpc/cpu/mpc85xx/p3041_ids.c | 20 +++---
> arch/powerpc/cpu/mpc85xx/p3060_serdes.c | 20 -----
> arch/powerpc/cpu/mpc85xx/p5020_ids.c | 20 +++---
> arch/powerpc/include/asm/immap_85xx.h | 10 ---
> board/freescale/mpc8548cds/law.c | 31 +-------
> board/freescale/mpc8548cds/mpc8548cds.c | 8 +-
> board/freescale/mpc8548cds/tlb.c | 64 ++++++++--------
> boards.cfg | 2 +
> drivers/net/fm/p3060.c | 17 ----
> drivers/net/phy/teranetics.c | 33 ++++++++
> include/configs/MPC8548CDS.h | 125 +++++++++++++++++++++++--------
> include/configs/p1_p2_rdb_pc.h | 16 ----
> 13 files changed, 196 insertions(+), 190 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Es ist offensichtlich, dass das menschliche Gehirn wie ein Computer
funktioniert. Da es keine dummen Computer gibt, gibt es also auch
keine dummen Menschen. Nur ein paar Leute, die unter DOS laufen.
-- <unbekannt>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
@ 2011-10-21 5:19 Kumar Gala
2011-10-21 21:52 ` Wolfgang Denk
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-21 5:19 UTC (permalink / raw)
To: u-boot
The following changes since commit efb2172ece93ef48f34fb8bdf963d3b72880cc7d:
Move timestamp and version files into 'generated' subdir (2011-10-17 23:57:00 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx master
Kumar Gala (6):
fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
fm: Don't allow disabling of FM1-DTSEC1
powerpc/85xx: Update setting of SRIO LIODNs
powerpc/85xx: Update device tree handling for SRIO
powerpc/85xx: Add support for RMan LIODN initialization
powerpc/85xx: Fix P2020DS booting
Kyle Moffett (1):
mpc85xx: Add inline GPIO acessor functions
Shengzhou Liu (2):
fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers
powerpc/85xx: Update USB device tree status based on pin settings
Timur Tabi (1):
powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)
arch/powerpc/cpu/mpc85xx/fdt.c | 23 +++++
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 10 --
arch/powerpc/cpu/mpc85xx/liodn.c | 88 ++++++++++++++++++
arch/powerpc/cpu/mpc85xx/p2041_ids.c | 20 ++++
arch/powerpc/cpu/mpc85xx/p3041_ids.c | 20 ++++
arch/powerpc/cpu/mpc85xx/p3060_ids.c | 10 ++-
arch/powerpc/cpu/mpc85xx/p4080_ids.c | 10 ++-
arch/powerpc/cpu/mpc85xx/p5020_ids.c | 20 ++++
arch/powerpc/cpu/mpc85xx/portals.c | 6 +
arch/powerpc/cpu/mpc8xxx/fdt.c | 72 +++++++++++++--
arch/powerpc/include/asm/fsl_liodn.h | 30 ++++++
arch/powerpc/include/asm/fsl_portals.h | 4 +
arch/powerpc/include/asm/immap_85xx.h | 13 +++
arch/powerpc/include/asm/mpc85xx_gpio.h | 123 +++++++++++++++++++++++++
board/freescale/corenet_ds/eth_hydra.c | 26 +-----
board/freescale/corenet_ds/eth_p4080.c | 74 ++++++++-------
board/freescale/p2020ds/ddr.c | 12 +++
common/fdt_support.c | 60 ++++++++++++-
drivers/net/fm/init.c | 10 ++-
drivers/net/fm/p1023.c | 5 +
drivers/net/fm/p3060.c | 5 +
drivers/net/fm/p4080.c | 5 +
drivers/net/fm/p5020.c | 5 +
drivers/net/phy/teranetics.c | 2 +-
include/configs/P2041RDB.h | 1 +
include/configs/P3041DS.h | 1 +
include/configs/P5020DS.h | 1 +
include/fdt_support.h | 28 ++++++
include/phy.h | 4 +
29 files changed, 602 insertions(+), 86 deletions(-)
create mode 100644 arch/powerpc/include/asm/mpc85xx_gpio.h
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-10-21 5:19 Kumar Gala
@ 2011-10-21 21:52 ` Wolfgang Denk
0 siblings, 0 replies; 19+ messages in thread
From: Wolfgang Denk @ 2011-10-21 21:52 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1110210018190.27466@right.am.freescale.net> you wrote:
> The following changes since commit efb2172ece93ef48f34fb8bdf963d3b72880cc7d:
>
> Move timestamp and version files into 'generated' subdir (2011-10-17 23:57:00 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-mpc85xx master
>
> Kumar Gala (6):
> fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
> fm: Don't allow disabling of FM1-DTSEC1
> powerpc/85xx: Update setting of SRIO LIODNs
> powerpc/85xx: Update device tree handling for SRIO
> powerpc/85xx: Add support for RMan LIODN initialization
> powerpc/85xx: Fix P2020DS booting
>
> Kyle Moffett (1):
> mpc85xx: Add inline GPIO acessor functions
>
> Shengzhou Liu (2):
> fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers
> powerpc/85xx: Update USB device tree status based on pin settings
>
> Timur Tabi (1):
> powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)
>
> arch/powerpc/cpu/mpc85xx/fdt.c | 23 +++++
> arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 10 --
> arch/powerpc/cpu/mpc85xx/liodn.c | 88 ++++++++++++++++++
> arch/powerpc/cpu/mpc85xx/p2041_ids.c | 20 ++++
> arch/powerpc/cpu/mpc85xx/p3041_ids.c | 20 ++++
> arch/powerpc/cpu/mpc85xx/p3060_ids.c | 10 ++-
> arch/powerpc/cpu/mpc85xx/p4080_ids.c | 10 ++-
> arch/powerpc/cpu/mpc85xx/p5020_ids.c | 20 ++++
> arch/powerpc/cpu/mpc85xx/portals.c | 6 +
> arch/powerpc/cpu/mpc8xxx/fdt.c | 72 +++++++++++++--
> arch/powerpc/include/asm/fsl_liodn.h | 30 ++++++
> arch/powerpc/include/asm/fsl_portals.h | 4 +
> arch/powerpc/include/asm/immap_85xx.h | 13 +++
> arch/powerpc/include/asm/mpc85xx_gpio.h | 123 +++++++++++++++++++++++++
> board/freescale/corenet_ds/eth_hydra.c | 26 +-----
> board/freescale/corenet_ds/eth_p4080.c | 74 ++++++++-------
> board/freescale/p2020ds/ddr.c | 12 +++
> common/fdt_support.c | 60 ++++++++++++-
> drivers/net/fm/init.c | 10 ++-
> drivers/net/fm/p1023.c | 5 +
> drivers/net/fm/p3060.c | 5 +
> drivers/net/fm/p4080.c | 5 +
> drivers/net/fm/p5020.c | 5 +
> drivers/net/phy/teranetics.c | 2 +-
> include/configs/P2041RDB.h | 1 +
> include/configs/P3041DS.h | 1 +
> include/configs/P5020DS.h | 1 +
> include/fdt_support.h | 28 ++++++
> include/phy.h | 4 +
> 29 files changed, 602 insertions(+), 86 deletions(-)
> create mode 100644 arch/powerpc/include/asm/mpc85xx_gpio.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Politician: An eel in the fundamental mud upon which the
superstructure of organized society is reared. When he wriggles he
mistakes the agitation of his tail for the trembling of the edifice.
As compared with the statesman, he suffers the disadvantage of being
alive. - Ambrose Bierce
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
@ 2011-11-11 14:17 Kumar Gala
2011-11-16 19:15 ` Wolfgang Denk
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-11-11 14:17 UTC (permalink / raw)
To: u-boot
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08 07:44:52 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Jerry Huang (2):
powerpc/mpc85xx: Set SYSCLK to the required frequency
powerpc/85xx: Set max alloc length to 10MB on P1022DS
Kumar Gala (20):
powerpc/85xx: Add support for Book-E MMU Arch v2.0
powerpc/85xx: Fix MPC8572DS NAND build
powerpc/85xx: Fix NAND SPL support
arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning
arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning
board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning
board/freescale/common/pixis.c: Fix GCC 4.6 build warning
board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning
board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning
board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning
board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning
board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning
drivers/net/fm/fm.c: Fix GCC 4.6 build warning
drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning
drivers/qe/uec.c: Fix GCC 4.6 build warning
arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning
powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND
Poonam Aggrwal (1):
fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399
Ramneek Mehresh (2):
powerpc/85xx: Fix warning for USB device-fixup
powerpc/85xx: Make inclusion of USB device fixup conditional
Roy Zang (1):
powerpc/QorIQ: fix network frame manager TBI PHY address settings
Timur Tabi (5):
powerpc/85xx: fix definition of MAS register macros
powerpc/85xx: fix some comments in the CCSR relocation code
powerpc/85xx: add some missing sync instructions in the CCSR relocation code
powerpc/85xx: verify the current address of CCSR before relocating it
powerpc/85xx: resize the boot page TLB before relocating CCSR
Xie Xiaobo (1):
phylib: Enable AR8021 phy support
chenhui zhao (2):
powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129
powerpc/mpc8548cds: Fix network initialization
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +
arch/powerpc/cpu/mpc85xx/cpu_init.c | 3 +-
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 4 +-
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 7 ++-
arch/powerpc/cpu/mpc85xx/start.S | 84 ++++++++++++++++++++++-
arch/powerpc/cpu/mpc85xx/tlb.c | 17 +++--
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 7 +--
arch/powerpc/cpu/mpc8xxx/ddr/options.c | 4 +
arch/powerpc/cpu/mpc8xxx/fdt.c | 24 ++++---
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 4 +-
arch/powerpc/include/asm/config_mpc85xx.h | 1 +
arch/powerpc/include/asm/mmu.h | 10 ++--
arch/powerpc/include/asm/processor.h | 6 ++
board/freescale/common/cds_pci_ft.c | 3 +-
board/freescale/common/ics307_clk.c | 69 ++++++++++++++++++
board/freescale/common/ics307_clk.h | 4 +-
board/freescale/common/ngpixis.c | 27 +++++++
board/freescale/common/pixis.c | 4 +-
board/freescale/corenet_ds/eth_hydra.c | 8 --
board/freescale/corenet_ds/eth_p4080.c | 8 --
board/freescale/mpc8548cds/mpc8548cds.c | 69 +++++++++++++++---
board/freescale/mpc8568mds/mpc8568mds.c | 3 +-
board/freescale/mpc8569mds/mpc8569mds.c | 2 -
board/freescale/mpc8572ds/tlb.c | 2 +
board/freescale/p1010rdb/p1010rdb.c | 2 +
board/freescale/p1_p2_rdb/p1_p2_rdb.c | 2 +
board/freescale/p1_p2_rdb_pc/law.c | 10 ++-
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 3 +
board/freescale/p2041rdb/eth.c | 8 --
board/sbc8548/sbc8548.c | 2 -
board/sbc8560/sbc8560.c | 3 +-
drivers/net/fm/fm.c | 3 +-
drivers/net/tsec.c | 93 +++++++++++++++++++++++++
drivers/qe/uec.c | 7 --
drivers/usb/host/ehci-fsl.c | 4 +-
include/config_phylib_all_drivers.h | 1 +
include/configs/MPC8536DS.h | 2 +-
include/configs/MPC8548CDS.h | 2 +
include/configs/MPC8569MDS.h | 2 +-
include/configs/MPC8572DS.h | 2 +-
include/configs/P1022DS.h | 2 +-
include/configs/P1_P2_RDB.h | 2 +-
include/configs/p1_p2_rdb_pc.h | 2 +-
43 files changed, 420 insertions(+), 106 deletions(-)
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-11-11 14:17 Kumar Gala
@ 2011-11-16 19:15 ` Wolfgang Denk
0 siblings, 0 replies; 19+ messages in thread
From: Wolfgang Denk @ 2011-11-16 19:15 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1111110817050.8953@right.am.freescale.net> you wrote:
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08 07:44:52 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Jerry Huang (2):
> powerpc/mpc85xx: Set SYSCLK to the required frequency
> powerpc/85xx: Set max alloc length to 10MB on P1022DS
>
> Kumar Gala (20):
> powerpc/85xx: Add support for Book-E MMU Arch v2.0
> powerpc/85xx: Fix MPC8572DS NAND build
> powerpc/85xx: Fix NAND SPL support
> arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning
> board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning
> board/freescale/common/pixis.c: Fix GCC 4.6 build warning
> board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning
> board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning
> board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning
> board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning
> board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning
> drivers/net/fm/fm.c: Fix GCC 4.6 build warning
> drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning
> drivers/qe/uec.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning
> powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND
>
> Poonam Aggrwal (1):
> fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399
>
> Ramneek Mehresh (2):
> powerpc/85xx: Fix warning for USB device-fixup
> powerpc/85xx: Make inclusion of USB device fixup conditional
>
> Roy Zang (1):
> powerpc/QorIQ: fix network frame manager TBI PHY address settings
>
> Timur Tabi (5):
> powerpc/85xx: fix definition of MAS register macros
> powerpc/85xx: fix some comments in the CCSR relocation code
> powerpc/85xx: add some missing sync instructions in the CCSR relocation code
> powerpc/85xx: verify the current address of CCSR before relocating it
> powerpc/85xx: resize the boot page TLB before relocating CCSR
>
> Xie Xiaobo (1):
> phylib: Enable AR8021 phy support
>
> chenhui zhao (2):
> powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129
> powerpc/mpc8548cds: Fix network initialization
>
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 3 +-
> arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 4 +-
> arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 7 ++-
> arch/powerpc/cpu/mpc85xx/start.S | 84 ++++++++++++++++++++++-
> arch/powerpc/cpu/mpc85xx/tlb.c | 17 +++--
> arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 7 +--
> arch/powerpc/cpu/mpc8xxx/ddr/options.c | 4 +
> arch/powerpc/cpu/mpc8xxx/fdt.c | 24 ++++---
> arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 4 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 1 +
> arch/powerpc/include/asm/mmu.h | 10 ++--
> arch/powerpc/include/asm/processor.h | 6 ++
> board/freescale/common/cds_pci_ft.c | 3 +-
> board/freescale/common/ics307_clk.c | 69 ++++++++++++++++++
> board/freescale/common/ics307_clk.h | 4 +-
> board/freescale/common/ngpixis.c | 27 +++++++
> board/freescale/common/pixis.c | 4 +-
> board/freescale/corenet_ds/eth_hydra.c | 8 --
> board/freescale/corenet_ds/eth_p4080.c | 8 --
> board/freescale/mpc8548cds/mpc8548cds.c | 69 +++++++++++++++---
> board/freescale/mpc8568mds/mpc8568mds.c | 3 +-
> board/freescale/mpc8569mds/mpc8569mds.c | 2 -
> board/freescale/mpc8572ds/tlb.c | 2 +
> board/freescale/p1010rdb/p1010rdb.c | 2 +
> board/freescale/p1_p2_rdb/p1_p2_rdb.c | 2 +
> board/freescale/p1_p2_rdb_pc/law.c | 10 ++-
> board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 3 +
> board/freescale/p2041rdb/eth.c | 8 --
> board/sbc8548/sbc8548.c | 2 -
> board/sbc8560/sbc8560.c | 3 +-
> drivers/net/fm/fm.c | 3 +-
> drivers/net/tsec.c | 93 +++++++++++++++++++++++++
> drivers/qe/uec.c | 7 --
> drivers/usb/host/ehci-fsl.c | 4 +-
> include/config_phylib_all_drivers.h | 1 +
> include/configs/MPC8536DS.h | 2 +-
> include/configs/MPC8548CDS.h | 2 +
> include/configs/MPC8569MDS.h | 2 +-
> include/configs/MPC8572DS.h | 2 +-
> include/configs/P1022DS.h | 2 +-
> include/configs/P1_P2_RDB.h | 2 +-
> include/configs/p1_p2_rdb_pc.h | 2 +-
> 43 files changed, 420 insertions(+), 106 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only person who always got his work done by Friday
was Robinson Crusoe.
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
@ 2011-11-29 15:21 Kumar Gala
2011-12-01 23:01 ` Wolfgang Denk
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-11-29 15:21 UTC (permalink / raw)
To: u-boot
The following changes since commit a63d9652757605ec5f7104addc5d38bf10ba8671:
menu.c: use puts() instead of printf() where possible (2011-11-28 20:19:41 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Ira W. Snyder (3):
mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification
mpc85xx: support board-specific reset function
mpc85xx: support for Freescale COM Express P2020
Jia Hongtao (1):
powerpc/85xx: fixup flexcan device tree clock-frequency
Kumar Gala (2):
powerpc/85xx: Add workaround for erratum CPU-A003999
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning
Shengzhou Liu (1):
powerpc/p3060qds: Add board related support for P3060QDS platform
Timur Tabi (4):
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h
powerpc/85xx: always implement the work-around for Erratum SATA_A001
powerpc/85xx: clean up and document the QE/FMAN microcode macros
powerpc/85xx: verify the localbus device tree address before booting the OS
York Sun (1):
powerpc/85xx: Add workaround for erratum A-003474
MAINTAINERS | 4 +
README | 38 ++
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 6 +
arch/powerpc/cpu/mpc85xx/cpu.c | 17 +-
arch/powerpc/cpu/mpc85xx/cpu_init.c | 49 ++-
arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 5 +
arch/powerpc/cpu/mpc85xx/fdt.c | 63 ++-
arch/powerpc/cpu/mpc85xx/release.S | 6 +
arch/powerpc/cpu/mpc85xx/start.S | 6 +
arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 7 +
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 3 +-
arch/powerpc/include/asm/config_mpc85xx.h | 19 +
arch/powerpc/include/asm/immap_85xx.h | 1 +
board/freescale/common/Makefile | 3 +
board/freescale/common/ics307_clk.c | 21 +-
board/freescale/common/qixis.c | 151 ++++++
board/freescale/common/qixis.h | 101 ++++
board/freescale/p2020come/Makefile | 46 ++
board/freescale/p2020come/ddr.c | 45 ++
board/freescale/p2020come/law.c | 39 ++
board/freescale/p2020come/p2020come.c | 287 +++++++++++
board/freescale/p2020come/tlb.c | 99 ++++
board/freescale/p3060qds/Makefile | 54 +++
board/freescale/p3060qds/ddr.c | 248 ++++++++++
board/freescale/p3060qds/eth.c | 482 +++++++++++++++++++
board/freescale/p3060qds/fixed_ddr.c | 214 +++++++++
board/freescale/p3060qds/p3060qds.c | 341 ++++++++++++++
board/freescale/p3060qds/p3060qds.h | 30 ++
board/freescale/p3060qds/p3060qds_qixis.h | 74 +++
boards.cfg | 5 +
doc/README.p3060qds | 111 +++++
drivers/block/fsl_sata.c | 21 -
drivers/block/fsl_sata.h | 1 +
drivers/net/fm/fm.c | 32 +-
drivers/qe/qe.c | 4 +-
include/configs/MPC8569MDS.h | 3 +-
include/configs/P1022DS.h | 1 -
include/configs/P1023RDS.h | 10 +-
include/configs/P2020COME.h | 576 +++++++++++++++++++++++
include/configs/P2041RDB.h | 21 +-
include/configs/P3041DS.h | 1 -
include/configs/P3060QDS.h | 48 ++
include/configs/P5020DS.h | 1 -
include/configs/corenet_ds.h | 22 +-
include/configs/p1_p2_rdb_pc.h | 5 +-
include/ddr_spd.h | 7 +
46 files changed, 3231 insertions(+), 97 deletions(-)
create mode 100644 board/freescale/common/qixis.c
create mode 100644 board/freescale/common/qixis.h
create mode 100644 board/freescale/p2020come/Makefile
create mode 100644 board/freescale/p2020come/ddr.c
create mode 100644 board/freescale/p2020come/law.c
create mode 100644 board/freescale/p2020come/p2020come.c
create mode 100644 board/freescale/p2020come/tlb.c
create mode 100644 board/freescale/p3060qds/Makefile
create mode 100644 board/freescale/p3060qds/ddr.c
create mode 100644 board/freescale/p3060qds/eth.c
create mode 100644 board/freescale/p3060qds/fixed_ddr.c
create mode 100644 board/freescale/p3060qds/p3060qds.c
create mode 100644 board/freescale/p3060qds/p3060qds.h
create mode 100644 board/freescale/p3060qds/p3060qds_qixis.h
create mode 100644 doc/README.p3060qds
create mode 100644 include/configs/P2020COME.h
create mode 100644 include/configs/P3060QDS.h
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-11-29 15:21 Kumar Gala
@ 2011-12-01 23:01 ` Wolfgang Denk
0 siblings, 0 replies; 19+ messages in thread
From: Wolfgang Denk @ 2011-12-01 23:01 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1111290921110.25317@right.am.freescale.net> you wrote:
> The following changes since commit a63d9652757605ec5f7104addc5d38bf10ba8671:
>
> menu.c: use puts() instead of printf() where possible (2011-11-28 20:19:41 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Ira W. Snyder (3):
> mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification
> mpc85xx: support board-specific reset function
> mpc85xx: support for Freescale COM Express P2020
>
> Jia Hongtao (1):
> powerpc/85xx: fixup flexcan device tree clock-frequency
>
> Kumar Gala (2):
> powerpc/85xx: Add workaround for erratum CPU-A003999
> arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning
>
> Shengzhou Liu (1):
> powerpc/p3060qds: Add board related support for P3060QDS platform
>
> Timur Tabi (4):
> powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h
> powerpc/85xx: always implement the work-around for Erratum SATA_A001
> powerpc/85xx: clean up and document the QE/FMAN microcode macros
> powerpc/85xx: verify the localbus device tree address before booting the OS
>
> York Sun (1):
> powerpc/85xx: Add workaround for erratum A-003474
>
> MAINTAINERS | 4 +
> README | 38 ++
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 6 +
> arch/powerpc/cpu/mpc85xx/cpu.c | 17 +-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 49 ++-
> arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 5 +
> arch/powerpc/cpu/mpc85xx/fdt.c | 63 ++-
> arch/powerpc/cpu/mpc85xx/release.S | 6 +
> arch/powerpc/cpu/mpc85xx/start.S | 6 +
> arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 7 +
> arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 3 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 19 +
> arch/powerpc/include/asm/immap_85xx.h | 1 +
> board/freescale/common/Makefile | 3 +
> board/freescale/common/ics307_clk.c | 21 +-
> board/freescale/common/qixis.c | 151 ++++++
> board/freescale/common/qixis.h | 101 ++++
> board/freescale/p2020come/Makefile | 46 ++
> board/freescale/p2020come/ddr.c | 45 ++
> board/freescale/p2020come/law.c | 39 ++
> board/freescale/p2020come/p2020come.c | 287 +++++++++++
> board/freescale/p2020come/tlb.c | 99 ++++
> board/freescale/p3060qds/Makefile | 54 +++
> board/freescale/p3060qds/ddr.c | 248 ++++++++++
> board/freescale/p3060qds/eth.c | 482 +++++++++++++++++++
> board/freescale/p3060qds/fixed_ddr.c | 214 +++++++++
> board/freescale/p3060qds/p3060qds.c | 341 ++++++++++++++
> board/freescale/p3060qds/p3060qds.h | 30 ++
> board/freescale/p3060qds/p3060qds_qixis.h | 74 +++
> boards.cfg | 5 +
> doc/README.p3060qds | 111 +++++
> drivers/block/fsl_sata.c | 21 -
> drivers/block/fsl_sata.h | 1 +
> drivers/net/fm/fm.c | 32 +-
> drivers/qe/qe.c | 4 +-
> include/configs/MPC8569MDS.h | 3 +-
> include/configs/P1022DS.h | 1 -
> include/configs/P1023RDS.h | 10 +-
> include/configs/P2020COME.h | 576 +++++++++++++++++++++++
> include/configs/P2041RDB.h | 21 +-
> include/configs/P3041DS.h | 1 -
> include/configs/P3060QDS.h | 48 ++
> include/configs/P5020DS.h | 1 -
> include/configs/corenet_ds.h | 22 +-
> include/configs/p1_p2_rdb_pc.h | 5 +-
> include/ddr_spd.h | 7 +
> 46 files changed, 3231 insertions(+), 97 deletions(-)
> create mode 100644 board/freescale/common/qixis.c
> create mode 100644 board/freescale/common/qixis.h
> create mode 100644 board/freescale/p2020come/Makefile
> create mode 100644 board/freescale/p2020come/ddr.c
> create mode 100644 board/freescale/p2020come/law.c
> create mode 100644 board/freescale/p2020come/p2020come.c
> create mode 100644 board/freescale/p2020come/tlb.c
> create mode 100644 board/freescale/p3060qds/Makefile
> create mode 100644 board/freescale/p3060qds/ddr.c
> create mode 100644 board/freescale/p3060qds/eth.c
> create mode 100644 board/freescale/p3060qds/fixed_ddr.c
> create mode 100644 board/freescale/p3060qds/p3060qds.c
> create mode 100644 board/freescale/p3060qds/p3060qds.h
> create mode 100644 board/freescale/p3060qds/p3060qds_qixis.h
> create mode 100644 doc/README.p3060qds
> create mode 100644 include/configs/P2020COME.h
> create mode 100644 include/configs/P3060QDS.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Here is an Appalachian version of management's answer to those who
are concerned with the fate of the project: "Don't worry about the
mule. Just load the wagon." - Mike Dennison's hillbilly uncle
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
@ 2011-12-07 4:11 Kumar Gala
2011-12-07 8:07 ` Wolfgang Denk
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-12-07 4:11 UTC (permalink / raw)
To: u-boot
The following changes since commit ea45cb0adcf4baa8f939fea4c848f3e1906f19d9:
net: Make sure IPaddr_t is 32 bits in size (2011-12-06 22:15:32 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Shaohui Xie (1):
p2041rdb: fix serdes clock map
board/freescale/p2041rdb/p2041rdb.c | 25 +++++++++++++++----------
1 files changed, 15 insertions(+), 10 deletions(-)
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [GIT PULL] Pull request u-boot-85xx.git
2011-12-07 4:11 Kumar Gala
@ 2011-12-07 8:07 ` Wolfgang Denk
0 siblings, 0 replies; 19+ messages in thread
From: Wolfgang Denk @ 2011-12-07 8:07 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1112062206300.24586@right.am.freescale.net> you wrote:
> The following changes since commit ea45cb0adcf4baa8f939fea4c848f3e1906f19d9:
>
> net: Make sure IPaddr_t is 32 bits in size (2011-12-06 22:15:32 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Shaohui Xie (1):
> p2041rdb: fix serdes clock map
>
> board/freescale/p2041rdb/p2041rdb.c | 25 +++++++++++++++----------
> 1 files changed, 15 insertions(+), 10 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
When properly administered, vacations do not diminish productivity:
for every week you're away and get nothing done, there's another when
your boss is away and you get twice as much done. -- Daniel B. Luten
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2011-12-07 8:07 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-14 7:34 [U-Boot] [GIT PULL] Pull request u-boot-85xx.git Kumar Gala
2011-10-14 19:15 ` Tabi Timur-B04825
2011-10-14 20:27 ` Kumar Gala
2011-10-14 20:29 ` Timur Tabi
2011-10-14 20:31 ` Kumar Gala
2011-10-14 20:37 ` Timur Tabi
2011-10-14 21:34 ` Wolfgang Denk
2011-10-15 19:59 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2011-12-07 4:11 Kumar Gala
2011-12-07 8:07 ` Wolfgang Denk
2011-11-29 15:21 Kumar Gala
2011-12-01 23:01 ` Wolfgang Denk
2011-11-11 14:17 Kumar Gala
2011-11-16 19:15 ` Wolfgang Denk
2011-10-21 5:19 Kumar Gala
2011-10-21 21:52 ` Wolfgang Denk
2011-10-07 16:06 Kumar Gala
2011-10-09 18:34 ` Wolfgang Denk
2011-10-09 22:48 ` Kumar Gala
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.