Re: i915 module does not find 82865G if configured as secondary

[Tempura San <tempura.san@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 2214 bytes --]

Sorry for the late reply. I have now tested with the current kernel (3.0.6).
At least it does not mess up as much as the manual patches, but still it
does not work.

I have attached the dmesg output if you want to check.

If you would like me to test patches, please do not hesitate.
As I am a bit short on time at the moment, it might take some time to
respond, but I will. :)

Yours,
Tempura.

On Mon, 10 Oct 2011 21:53:15 +0100, Chris Wilson wrote:
> On Mon, 10 Oct 2011 22:32:38 +0200, Tempura San <tempura.san@gmail.com> wrote:
> Non-text part: multipart/mixed
>> This would be great, but...
>>
>> I have just tested the patches and it really messes up the system.
>>
>> On the first boot I got a shell and was able to to a dmesg:
>> ...
>> [   46.775935] [drm] Initialized drm 1.1.0 20060810
>> [   46.926398] i915 0000:00:02.0: enabling device (0000 -> 0003)
>> [   46.926412] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> [   46.926422] i915 0000:00:02.0: setting latency timer to 64
>> [   46.932858] [drm] set up 31M of stolen space
>> [   46.933087] i915 0000:00:02.0: BAR 6: can't allocate resource (bogus
>> alignment) [0x0-0x0] flags 0x0
>> [   46.933093] [drm] failed to find VBIOS tables
>> [   46.978294] [drm] initialized overlay support
>> [   47.308831] Console: switching to colour frame buffer device 160x64
>> [   47.308849] fb0: inteldrmfb frame buffer device
>> [   47.308853] registered panic notifier
>> [   47.308868] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
>> minor 0
>> [   47.323940] vgaarb: this pci device is not a vga device
>> [   47.355806] render error detected, EIR: 0x00000010
>> [   47.355815] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010,
>> masking
>> [   47.355835] render error detected, EIR: 0x00000010
> A page table error upon initialisation. It would seem like we depend
> upon the BIOS leaving the registers in a sane state, which is less
> likely in this situation since the BIOS was not using the card at all.
> We've certainly got better over time in this regard and the latest kernel
> is much more likely to succeed...
>
> However, I doubt that it is perfect, and your feedback would be most
> welcome.
> -Chris
>

[-- Attachment #2: dmesg.3.0.6.txt --]
[-- Type: text/plain, Size: 44605 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.6 (cvarga@ikari) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Wed Oct 12 19:21:29 CEST 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003df70000 (usable)
[    0.000000]  BIOS-e820: 000000003df70000 - 000000003df7a000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003df7a000 - 000000003df80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003df80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI present.
[    0.000000] DMI: IBM 8189KRG/IBM, BIOS 2AKT51AGR 07/06/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3df70 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03DF80000 mask FFFF80000 uncachable
[    0.000000]   2 base 03E000000 mask FFE000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f63f0] f63f0
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[    0.000000] RAMDISK: 2dcdc000 - 2e7d4000
[    0.000000] ACPI: RSDP 000f64a0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 3df7509c 00038 (v01 PTLTD    RSDT   060400D0  LTP 00000000)
[    0.000000] ACPI: FACP 3df79e93 00074 (v01 IBM    THINKCEN 060400D0 PTL  00000001)
[    0.000000] ACPI: DSDT 3df750d4 04DBF (v01    IBM THINKCEN 060400D0 MSFT 0100000E)
[    0.000000] ACPI: FACS 3df7afc0 00040
[    0.000000] ACPI: TCPA 3df79f07 00032 (v01 IBM    THINKCEN 060400D0 PTL  00000001)
[    0.000000] ACPI: APIC 3df79f39 00068 (v01 PTLTD  ? APIC   060400D0  LTP 00000000)
[    0.000000] ACPI: BOOT 3df79fa1 00028 (v01 PTLTD  $SBFTBL$ 060400D0  LTP 00000001)
[    0.000000] ACPI: SSDT 3df79fc9 00037 (v01 PTLTD  ACPIHT   060400D0  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 103MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003df70
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003df70
[    0.000000] On node 0 totalpages: 253695
[    0.000000] free_area_init_node: node 0, pgdat c13c4800, node_mem_map f703d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 207 pages used for memmap
[    0.000000]   HighMem zone: 26275 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f6c00000 s26112 r0 d23040 u2097152
[    0.000000] pcpu-alloc: s26112 r0 d23040 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251712
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.6 root=UUID=a13b579f-2af9-418f-bf25-63e7ca8ffe07 ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003df70)
[    0.000000] Memory: 989736k/1015232k available (2622k kernel code, 25044k reserved, 1263k data, 392k init, 105928k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc13cc000 - 0xc142e000   ( 392 kB)
[    0.000000]       .data : 0xc128fbd2 - 0xc13cbb00   (1263 kB)
[    0.000000]       .text : 0xc1000000 - 0xc128fbd2   (2622 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=f6820000 soft=f6822000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2992.145 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.29 BogoMIPS (lpj=11968580)
[    0.008126] pid_max: default: 32768 minimum: 301
[    0.008270] Security Framework initialized
[    0.008332] SELinux:  Disabled at boot.
[    0.008422] Mount-cache hash table entries: 512
[    0.008812] Initializing cgroup subsys cpuacct
[    0.008894] Initializing cgroup subsys devices
[    0.008954] Initializing cgroup subsys freezer
[    0.009012] Initializing cgroup subsys net_cls
[    0.009118] CPU: Physical Processor ID: 0
[    0.009176] CPU: Processor Core ID: 0
[    0.009234] mce: CPU supports 4 MCE banks
[    0.009302] CPU0: Thermal monitoring enabled (TM1)
[    0.010380] ACPI: Core revision 20110413
[    0.014846] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.015200] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054952] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[    0.056003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              40
[    0.056003] ... generic registers:      18
[    0.056003] ... value mask:             000000ffffffffff
[    0.056003] ... max period:             0000007fffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000003ffff
[    0.056003] CPU 1 irqstacks, hard=f6872000 soft=f6874000
[    0.056003] Booting Node   0, Processors  #1 Ok.
[    0.056003] smpboot cpu 1: start_ip = 9b000
[    0.012000] Initializing CPU#1
[    0.012000] CPU1: Thermal monitoring handled by SMI
[    0.144026] Brought up 2 CPUs
[    0.144143] Total of 2 processors activated (11969.75 BogoMIPS).
[    0.144752] devtmpfs: initialized
[    0.144752] PM: Registering ACPI NVS region at 3df7a000 (24576 bytes)
[    0.144752] print_constraints: dummy: 
[    0.144752] NET: Registered protocol family 16
[    0.144752] ACPI: bus type pci registered
[    0.145210] PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
[    0.145273] PCI: Using configuration type 1 for base access
[    0.145794] bio: create slab <bio-0> at 0
[    0.148739] ACPI: EC: Look up EC in DSDT
[    0.152254] ACPI: Interpreter enabled
[    0.152319] ACPI: (supports S0 S1 S3 S4 S5)
[    0.152587] ACPI: Using IOAPIC for interrupt routing
[    0.179356] ACPI: No dock devices found.
[    0.179421] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.180635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.181995] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.182000] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.182004] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[    0.182008] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[    0.182011] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.182015] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.182018] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.182022] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.182026] pci_root PNP0A03:00: host bridge window [mem 0x3df80000-0xfebfffff] (ignored)
[    0.182030] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.182045] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[    0.182051] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.182118] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[    0.182173] pci 0000:00:02.0: [8086:2572] type 0 class 0x000380
[    0.182188] pci 0000:00:02.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[    0.182197] pci 0000:00:02.0: reg 14: [mem 0xd0080000-0xd00fffff]
[    0.182205] pci 0000:00:02.0: reg 18: [io  0x1890-0x1897]
[    0.182257] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[    0.182268] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[    0.182346] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[    0.182391] pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
[    0.182425] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[    0.182471] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
[    0.182504] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[    0.182549] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
[    0.182583] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[    0.182629] pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
[    0.182674] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[    0.182697] pci 0000:00:1d.7: reg 10: [mem 0xd0000000-0xd00003ff]
[    0.182779] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.182785] pci 0000:00:1d.7: PME# disabled
[    0.182804] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.182848] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[    0.182914] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.182922] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.183004] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.183081] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[    0.183095] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.183105] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.183115] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.183125] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.183135] pci 0000:00:1f.2: reg 20: [io  0x1880-0x188f]
[    0.183166] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[    0.183212] pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
[    0.183249] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[    0.183266] pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
[    0.183276] pci 0000:00:1f.5: reg 14: [io  0x18c0-0x18ff]
[    0.183286] pci 0000:00:1f.5: reg 18: [mem 0xd0000800-0xd00009ff]
[    0.183296] pci 0000:00:1f.5: reg 1c: [mem 0xd0000400-0xd00004ff]
[    0.183336] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.183341] pci 0000:00:1f.5: PME# disabled
[    0.183381] pci 0000:03:08.0: [8086:1050] type 0 class 0x000200
[    0.183398] pci 0000:03:08.0: reg 10: [mem 0xd0100000-0xd0100fff]
[    0.183408] pci 0000:03:08.0: reg 14: [io  0x2000-0x203f]
[    0.183460] pci 0000:03:08.0: supports D1 D2
[    0.183463] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183468] pci 0000:03:08.0: PME# disabled
[    0.183489] pci 0000:03:0a.0: [4005:2302] type 0 class 0x000300
[    0.183505] pci 0000:03:0a.0: reg 10: [mem 0xd0200000-0xd03fffff]
[    0.183562] pci 0000:03:0a.0: reg 30: [mem 0x00000000-0x00007fff pref]
[    0.183585] pci 0000:03:0c.0: [1106:3038] type 0 class 0x000c03
[    0.183631] pci 0000:03:0c.0: reg 20: [io  0x2040-0x205f]
[    0.183663] pci 0000:03:0c.0: PME# supported from D0 D3hot D3cold
[    0.183668] pci 0000:03:0c.0: PME# disabled
[    0.183687] pci 0000:03:0c.1: [1106:3038] type 0 class 0x000c03
[    0.183732] pci 0000:03:0c.1: reg 20: [io  0x2060-0x207f]
[    0.183765] pci 0000:03:0c.1: PME# supported from D0 D3hot D3cold
[    0.183770] pci 0000:03:0c.1: PME# disabled
[    0.183788] pci 0000:03:0c.2: [1106:3104] type 0 class 0x000c03
[    0.183805] pci 0000:03:0c.2: reg 10: [mem 0xd0101000-0xd01010ff]
[    0.183866] pci 0000:03:0c.2: PME# supported from D0 D3hot D3cold
[    0.183871] pci 0000:03:0c.2: PME# disabled
[    0.183907] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.183976] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.183981] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd03fffff]
[    0.183987] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.183991] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.183995] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.184020] pci_bus 0000:00: on NUMA node 0
[    0.184025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.184148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
[    0.184304]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.238251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.238828] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.239399] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.239971] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.240549] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.241124] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.241696] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.242271] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.242914] vgaarb: device added: PCI:0000:03:0a.0,decodes=io+mem,owns=io+mem,locks=none
[    0.242996] vgaarb: loaded
[    0.243051] vgaarb: bridge control possible 0000:03:0a.0
[    0.243164] PCI: Using ACPI for IRQ routing
[    0.243287] PCI: pci_cache_line_size set to 64 bytes
[    0.243377] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.243380] reserve RAM buffer: 000000003df70000 - 000000003fffffff 
[    0.243615] hpet clockevent registered
[    0.243620] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.243686] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.243897] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.248044] Switching to clocksource hpet
[    0.250109] pnp: PnP ACPI init
[    0.250184] ACPI: bus type pnp registered
[    0.250988] pnp 00:00: [bus 00-ff]
[    0.250992] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.250995] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.250999] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.251002] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.251005] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.251010] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.251013] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.251016] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.251019] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.251022] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.251026] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.251029] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.251032] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.251035] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.251038] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.251041] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.251045] pnp 00:00: [mem 0x3df80000-0xfebfffff window]
[    0.251048] pnp 00:00: [io  0x0d00-0xffff window]
[    0.251051] pnp 00:00: [mem 0xfed00000-0xfed003ff window]
[    0.251121] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.251221] pnp 00:01: [io  0x0010-0x001f]
[    0.251224] pnp 00:01: [io  0x0024-0x0025]
[    0.251227] pnp 00:01: [io  0x0028-0x0029]
[    0.251229] pnp 00:01: [io  0x002c-0x002d]
[    0.251232] pnp 00:01: [io  0x002e-0x002f]
[    0.251235] pnp 00:01: [io  0x0030-0x0031]
[    0.251237] pnp 00:01: [io  0x0034-0x0035]
[    0.251240] pnp 00:01: [io  0x0038-0x0039]
[    0.251242] pnp 00:01: [io  0x003c-0x003d]
[    0.251245] pnp 00:01: [io  0x004e-0x004f]
[    0.251248] pnp 00:01: [io  0x0072-0x0077]
[    0.251250] pnp 00:01: [io  0x0080]
[    0.251253] pnp 00:01: [io  0x0090-0x009f]
[    0.251255] pnp 00:01: [io  0x00a4-0x00a5]
[    0.251258] pnp 00:01: [io  0x00a8-0x00a9]
[    0.251261] pnp 00:01: [io  0x00ac-0x00ad]
[    0.251263] pnp 00:01: [io  0x00b0-0x00b5]
[    0.251266] pnp 00:01: [io  0x00b8-0x00b9]
[    0.251268] pnp 00:01: [io  0x00bc-0x00bd]
[    0.251271] pnp 00:01: [io  0x04d0-0x04d1]
[    0.251274] pnp 00:01: [io  0x0800-0x087f]
[    0.251276] pnp 00:01: [io  0x1000-0x107f]
[    0.251279] pnp 00:01: [io  0x1100-0x111f]
[    0.251282] pnp 00:01: [io  0x1180-0x11bf]
[    0.251284] pnp 00:01: [io  0xe000-0xe00f]
[    0.251287] pnp 00:01: [io  0xfe00]
[    0.251290] pnp 00:01: [io  0xfe10-0xfe11]
[    0.251293] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[    0.251295] pnp 00:01: [mem 0xfed90000]
[    0.251383] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.251447] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.251509] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.251572] system 00:01: [io  0x1100-0x111f] has been reserved
[    0.251634] system 00:01: [io  0x1180-0x11bf] has been reserved
[    0.251696] system 00:01: [io  0xe000-0xe00f] has been reserved
[    0.251757] system 00:01: [io  0xfe00] has been reserved
[    0.251757] Switched to NOHz mode on CPU #0
[    0.251816] system 00:01: [io  0xfe10-0xfe11] has been reserved
[    0.251882] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.251887] Switched to NOHz mode on CPU #1
[    0.252014] system 00:01: [mem 0xfed90000] has been reserved
[    0.252077] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.252094] pnp 00:02: [io  0x0000-0x000f]
[    0.252097] pnp 00:02: [io  0x0081-0x008f]
[    0.252100] pnp 00:02: [io  0x00c0-0x00df]
[    0.252103] pnp 00:02: [dma 4]
[    0.252135] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.252149] pnp 00:03: [io  0x00f0-0x00fe]
[    0.252161] pnp 00:03: [irq 13]
[    0.252193] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.252208] pnp 00:04: [io  0x0070-0x0071]
[    0.252215] pnp 00:04: [irq 8]
[    0.252247] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.252260] pnp 00:05: [io  0x0061]
[    0.252293] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.252497] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.252535] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.252614] pnp 00:07: [io  0x0060]
[    0.252618] pnp 00:07: [io  0x0064]
[    0.252624] pnp 00:07: [irq 1]
[    0.252690] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.252754] pnp 00:08: [irq 12]
[    0.252816] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257190] pnp 00:09: [io  0x03f0-0x03f5]
[    0.257195] pnp 00:09: [io  0x03f7]
[    0.257207] pnp 00:09: [irq 6]
[    0.257210] pnp 00:09: [dma 2]
[    0.258684] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.263078] pnp 00:0a: [io  0x03f8-0x03ff]
[    0.263092] pnp 00:0a: [irq 4]
[    0.264603] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.272469] pnp 00:0b: [io  0x0378-0x037f]
[    0.272474] pnp 00:0b: [io  0x0778-0x077f]
[    0.272486] pnp 00:0b: [irq 7]
[    0.272489] pnp 00:0b: [dma 3]
[    0.274358] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.276520] pnp: PnP ACPI: found 12 devices
[    0.276584] ACPI: ACPI bus type pnp unregistered
[    0.276645] PnPBIOS: Disabled by ACPI PNP
[    0.313345] PCI: max bus depth: 1 pci_try_num: 2
[    0.313369] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref]
[    0.313449] pci 0000:03:0a.0: BAR 6: assigned [mem 0x40000000-0x40007fff pref]
[    0.313526] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.313587] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.313653] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd03fffff]
[    0.313719] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x400fffff pref]
[    0.313809] pci 0000:00:1e.0: setting latency timer to 64
[    0.313814] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.313817] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.313821] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.313824] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd03fffff]
[    0.313827] pci_bus 0000:03: resource 2 [mem 0x40000000-0x400fffff pref]
[    0.313830] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    0.313833] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[    0.313900] NET: Registered protocol family 2
[    0.314059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.314491] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.315204] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.315829] TCP: Hash tables configured (established 131072 bind 65536)
[    0.319839] TCP reno registered
[    0.319905] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.319980] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.320285] NET: Registered protocol family 1
[    0.320579] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[    0.320661] pci 0000:03:0a.0: Boot video device
[    0.320702] PCI: CLS 32 bytes, default 64
[    0.320775] Unpacking initramfs...
[    0.706315] Freeing initrd memory: 11232k freed
[    0.717630] Simple Boot Flag at 0x35 set to 0x1
[    0.718082] audit: initializing netlink socket (disabled)
[    0.718159] type=2000 audit(1318683529.712:1): initialized
[    0.736354] highmem bounce pool size: 64 pages
[    0.736420] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.738813] VFS: Disk quotas dquot_6.5.2
[    0.739013] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.739232] msgmni has been set to 1748
[    0.739651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.739729] io scheduler noop registered
[    0.739787] io scheduler deadline registered
[    0.739858] io scheduler cfq registered (default)
[    0.740191] isapnp: Scanning for PnP cards...
[    1.093972] isapnp: No Plug & Play device found
[    1.094124] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.114483] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.360454] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.408143] Linux agpgart interface v0.103
[    1.408341] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    1.408430] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[    1.408650] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.408847] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[    1.409105] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.410877] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.410944] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.411149] mousedev: PS/2 mouse device common for all mice
[    1.411262] rtc_cmos 00:04: RTC can wake from S4
[    1.411416] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.411499] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.411573] cpuidle: using governor ladder
[    1.411631] cpuidle: using governor menu
[    1.412092] TCP cubic registered
[    1.412346] NET: Registered protocol family 10
[    1.413326] Mobile IPv6
[    1.413382] NET: Registered protocol family 17
[    1.413443] Registering the dns_resolver key type
[    1.413533] Using IPI No-Shortcut mode
[    1.413700] PM: Hibernation image not present or could not be loaded.
[    1.413716] registered taskstats version 1
[    1.414077] rtc_cmos 00:04: setting system clock to 2011-10-15 12:58:50 UTC (1318683530)
[    1.414218] Initializing network drop monitor service
[    1.414408] Freeing unused kernel memory: 392k freed
[    1.414849] Write protecting the kernel text: 2624k
[    1.414935] Write protecting the kernel read-only data: 904k
[    1.448822] udev[47]: starting version 164
[    1.531371] thermal LNXTHERM:00: registered as thermal_zone0
[    1.531438] ACPI: Thermal Zone [THM0] (57 C)
[    1.549467] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.549539] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.549705] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.576505] usbcore: registered new interface driver usbfs
[    1.576607] usbcore: registered new interface driver hub
[    1.616983] SCSI subsystem initialized
[    1.624218] usbcore: registered new device driver usb
[    1.625136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.625263] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.625355] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.625363] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.625505] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.625633] ehci_hcd 0000:00:1d.7: debug port 1
[    1.629581] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.636982] e100 0000:03:08.0: PME# disabled
[    1.638506] e100 0000:03:08.0: eth0: addr 0xd0100000, irq 20, MAC addr 00:0d:60:ac:18:9d
[    1.640299] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000000
[    1.653985] libata version 3.00 loaded.
[    1.656197] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.656321] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.656390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.656470] usb usb1: Product: EHCI Host Controller
[    1.656535] usb usb1: Manufacturer: Linux 3.0.6 ehci_hcd
[    1.656598] usb usb1: SerialNumber: 0000:00:1d.7
[    1.656923] hub 1-0:1.0: USB hub found
[    1.656994] hub 1-0:1.0: 8 ports detected
[    1.657222] ata_piix 0000:00:1f.2: version 2.13
[    1.657228] ehci_hcd 0000:03:0c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.657265] ehci_hcd 0000:03:0c.2: EHCI Host Controller
[    1.657301] ehci_hcd 0000:03:0c.2: new USB bus registered, assigned bus number 2
[    1.657425] ehci_hcd 0000:03:0c.2: irq 22, io mem 0xd0101000
[    1.657516] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.657582] ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
[    1.668034] ehci_hcd 0000:03:0c.2: USB 2.0 started, EHCI 0.95
[    1.668145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.668208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.668284] usb usb2: Product: EHCI Host Controller
[    1.668343] usb usb2: Manufacturer: Linux 3.0.6 ehci_hcd
[    1.668402] usb usb2: SerialNumber: 0000:03:0c.2
[    1.668664] hub 2-0:1.0: USB hub found
[    1.668733] hub 2-0:1.0: 4 ports detected
[    1.714965] uhci_hcd: USB Universal Host Controller Interface driver
[    1.716041] Refined TSC clocksource calibration: 2992.499 MHz.
[    1.716109] Switching to clocksource tsc
[    1.812030] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.812593] scsi0 : ata_piix
[    1.812806] scsi1 : ata_piix
[    1.813664] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[    1.813729] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    1.813863] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.813945] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.813953] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.814055] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.814195] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[    1.814326] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.814396] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.814478] usb usb3: Product: UHCI Host Controller
[    1.814543] usb usb3: Manufacturer: Linux 3.0.6 uhci_hcd
[    1.814607] usb usb3: SerialNumber: 0000:00:1d.0
[    1.814902] hub 3-0:1.0: USB hub found
[    1.814970] hub 3-0:1.0: 2 ports detected
[    1.815153] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.815224] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.815229] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.815299] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    1.815412] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    1.815514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.815583] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.815665] usb usb4: Product: UHCI Host Controller
[    1.815725] usb usb4: Manufacturer: Linux 3.0.6 uhci_hcd
[    1.815787] usb usb4: SerialNumber: 0000:00:1d.1
[    1.816080] hub 4-0:1.0: USB hub found
[    1.816150] hub 4-0:1.0: 2 ports detected
[    1.816311] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.816382] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.816386] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.816454] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    1.816569] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.816672] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.816736] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.816811] usb usb5: Product: UHCI Host Controller
[    1.816870] usb usb5: Manufacturer: Linux 3.0.6 uhci_hcd
[    1.816929] usb usb5: SerialNumber: 0000:00:1d.2
[    1.817154] hub 5-0:1.0: USB hub found
[    1.817220] hub 5-0:1.0: 2 ports detected
[    1.817371] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.817441] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.817445] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.817512] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
[    1.817612] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    1.817714] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.817777] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.817852] usb usb6: Product: UHCI Host Controller
[    1.817910] usb usb6: Manufacturer: Linux 3.0.6 uhci_hcd
[    1.817970] usb usb6: SerialNumber: 0000:00:1d.3
[    1.818186] hub 6-0:1.0: USB hub found
[    1.818253] hub 6-0:1.0: 2 ports detected
[    1.818413] uhci_hcd 0000:03:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.818484] uhci_hcd 0000:03:0c.0: UHCI Host Controller
[    1.818552] uhci_hcd 0000:03:0c.0: new USB bus registered, assigned bus number 7
[    1.818664] uhci_hcd 0000:03:0c.0: irq 20, io base 0x00002040
[    1.818765] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.818829] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.818904] usb usb7: Product: UHCI Host Controller
[    1.818964] usb usb7: Manufacturer: Linux 3.0.6 uhci_hcd
[    1.819024] usb usb7: SerialNumber: 0000:03:0c.0
[    1.819239] hub 7-0:1.0: USB hub found
[    1.819306] hub 7-0:1.0: 2 ports detected
[    1.819469] uhci_hcd 0000:03:0c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.819539] uhci_hcd 0000:03:0c.1: UHCI Host Controller
[    1.819606] uhci_hcd 0000:03:0c.1: new USB bus registered, assigned bus number 8
[    1.819719] uhci_hcd 0000:03:0c.1: irq 21, io base 0x00002060
[    1.819817] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.819881] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.819956] usb usb8: Product: UHCI Host Controller
[    1.823791] usb usb8: Manufacturer: Linux 3.0.6 uhci_hcd
[    1.823851] usb usb8: SerialNumber: 0000:03:0c.1
[    1.824096] hub 8-0:1.0: USB hub found
[    1.824164] hub 8-0:1.0: 2 ports detected
[    1.976337] ata2.00: ATA-8: ST31500541AS, CC34, max UDMA/133
[    1.976403] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.992322] ata2.00: configured for UDMA/133
[    2.080027] usb 1-5: new high speed USB device number 3 using ehci_hcd
[    2.143904] ata1.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100
[    2.143967] ata1.00: 976773168 sectors, multi 16: LBA48 
[    2.144038] ata1.01: ATAPI: LITE-ON DVDRW SOHW-1673S, JS01, max UDMA/66
[    2.212320] usb 1-5: New USB device found, idVendor=050d, idProduct=0234
[    2.212386] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.213167] hub 1-5:1.0: USB hub found
[    2.213338] hub 1-5:1.0: 4 ports detected
[    2.218744] ata1.00: configured for UDMA/100
[    2.232163] ata1.01: configured for UDMA/66
...
[    2.334921] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.335223] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.342044] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.343430] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.344775] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    2.476061] hub 2-0:1.0: over-current condition on port 3
[    2.684029] hub 2-0:1.0: over-current condition on port 4
[    2.908026] usb 4-2: new full speed USB device number 2 using uhci_hcd
[    3.132306] usb 4-2: New USB device found, idVendor=041e, idProduct=4011
[    3.132373] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.302883] device-mapper: uevent: version 1.0.3
[    3.303462] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    3.336600] EXT3-fs: barriers not enabled
[    3.345378] kjournald starting.  Commit interval 5 seconds
...
[    5.018869] udev[297]: starting version 164
[    5.522786] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
[    5.522890] ACPI: Power Button [PWRB]
[    5.523082] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    5.523261] ACPI: Power Button [PWRF]
[    5.525111] ACPI: acpi_idle registered with cpuidle
[    5.553683] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    5.554426] intel_rng: Firmware space is locked read-only. If you can't or
[    5.554430] intel_rng: don't want to disable this in firmware setup, and if
[    5.554432] intel_rng: you are certain that your system has a functional
[    5.554434] intel_rng: RNG, try using the 'no_fwh_detect' option.
[    5.708959] Linux video capture interface: v2.00
[    5.980569] parport_pc 00:0b: reported by Plug and Play ACPI
[    5.980705] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
...
[    6.092468] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.106411] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.107784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.194957] Initializing USB Mass Storage driver...
[    6.195279] scsi2 : usb-storage 8-2:1.2
[    6.195602] usbcore: registered new interface driver usb-storage
[    6.195675] USB Mass Storage support registered.
[    6.230156] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x0180
[    6.230311] usbcore: registered new interface driver usblp
[    6.755881] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.756044] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    7.176025] intel8x0_measure_ac97_clock: measured 54710 usecs (2636 samples)
[    7.176093] intel8x0: clocking to 48000
[    7.213061] scsi 2:0:0:0: Direct-Access     Lexmark  USB Mass Storage  200 PQ: 0 ANSI: 0
[    7.214002] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    7.273077] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    7.457918] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB FW:q8] on usb-0000:00:1d.2-2/input0
[    7.466201] generic-usb 0003:043D:0180.0002: hiddev0,hidraw1: USB HID v1.00 Device [Lexmark S300-S400 Series] on usb-0000:03:0c.1-2/input3
[    7.469441] input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.0/input/input4
[    7.469785] generic-usb 0003:108B:0005.0003: input,hidraw2: USB HID v1.11 Keyboard [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:00:1d.7-5.4/input0
[    7.477602] input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.1/input/input5
[    7.478292] generic-usb 0003:108B:0005.0004: input,hidraw3: USB HID v1.11 Mouse [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:00:1d.7-5.4/input1
[    7.478444] usbcore: registered new interface driver usbhid
[    7.478510] usbhid: USB HID core driver
[    9.381660] EXT3-fs (sda2): using internal journal
[    9.916302] padlock_aes: VIA PadLock not detected.
[   10.293230] loop: module loaded
[   11.150180] Adding 2008088k swap on /dev/mapper/swp.  Priority:-1 extents:1 across:2008088k 
[   13.716862] EXT3-fs: barriers not enabled
...
[   16.833809] Bridge firewalling registered
[   16.841067] device eth0 entered promiscuous mode
[   16.861061] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.864179] e100 0000:03:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   16.864494] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.870071] br0: port 1(eth0) entering forwarding state
[   16.870139] br0: port 1(eth0) entering forwarding state
[   24.326318] RPC: Registered named UNIX socket transport module.
[   24.326402] RPC: Registered udp transport module.
[   24.326465] RPC: Registered tcp transport module.
[   24.326528] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.365558] FS-Cache: Loaded
[   24.396306] FS-Cache: Netfs 'nfs' registered for caching
[   24.433926] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   24.705139] fuse init (API version 7.16)
[   24.778964] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.794462] nf_conntrack version 0.5.0 (15646 buckets, 62584 max)
[   25.208513] ttyS1: LSR safety check engaged!
[   25.210361] ttyS1: LSR safety check engaged!
[   25.888017] br0: port 1(eth0) entering forwarding state
[   27.168016] br0: no IPv6 routers present
[   27.408031] eth0: no IPv6 routers present
[   28.902159] ttyS1: LSR safety check engaged!
[   36.466978] tun: Universal TUN/TAP device driver, 1.6
[   36.467063] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   36.546029] device tap0 entered promiscuous mode
[   36.551015] br0: port 2(tap0) entering forwarding state
[   36.551087] br0: port 2(tap0) entering forwarding state
[   45.568063] br0: port 2(tap0) entering forwarding state
[   46.211231] [drm] Initialized drm 1.1.0 20060810
[   46.407565] i915 0000:00:02.0: enabling device (0000 -> 0003)
[   46.407580] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   46.407590] i915 0000:00:02.0: setting latency timer to 64
[   46.441743] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   46.441752] [drm] Driver supports precise vblank timestamp query.
[   46.441768] i915 0000:00:02.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment)
[   46.441773] [drm] failed to find VBIOS tables
[   46.478281] [drm] initialized overlay support
[   46.596725] Console: switching to colour frame buffer device 160x64
[   46.596744] fb0: inteldrmfb frame buffer device
[   46.596748] drm: registered panic notifier
[   46.596883] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   46.600849] vgaarb: this pci device is not a vga device
[   46.632236] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[   46.636225] render error detected, EIR: 0x00000010
[   46.636225] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[   46.636225] render error detected, EIR: 0x00000010
[   46.751125] Bluetooth: Core ver 2.16
[   46.751171] NET: Registered protocol family 31
[   46.751174] Bluetooth: HCI device and connection manager initialized
[   46.751179] Bluetooth: HCI socket layer initialized
[   46.902570] vgaarb: this pci device is not a vga device
[   47.472035] tap0: no IPv6 routers present
[   48.752791] lp0: using parport0 (interrupt-driven).
[   48.992239] ppdev: user-space parallel port driver
[   52.294831] svc: failed to register lockdv1 RPC service (errno 97).
[   52.294912] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   52.312328] NFSD: starting 90-second grace period
[   52.379653] powernow: This module only works with AMD K7 CPUs
[   54.743709] cpufreq-nforce2: No nForce2 chipset.
[   55.071663] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[   55.072677] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[   55.348041] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[   55.356109] render error detected, EIR: 0x00000010
[   55.356119] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[   55.356131] render error detected, EIR: 0x00000010
[   62.148049] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[   62.156108] render error detected, EIR: 0x00000010
[   62.156117] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[   62.156129] render error detected, EIR: 0x00000010
[   64.148029] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[   64.148171] [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
[   64.148179] [drm:i915_reset] *ERROR* Failed to reset chip.

[-- Attachment #3: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx