* No line out on latest Mac Mini
@ 2011-10-22 12:14 John Frankish
2011-10-22 12:18 ` Jérémy Lal
0 siblings, 1 reply; 5+ messages in thread
From: John Frankish @ 2011-10-22 12:14 UTC (permalink / raw)
To: alsa-devel@alsa-project.org
I posted this to the alsa-user list a couple of weeks ago but did not get an answer
I've been trying to get analog line out to work to headphones or
powered speakers with the latest Mac Mini, but so far the best I've
managed to achieve is to get the internal speaker to work. Line out
works with the Mac OS.
I've also tried the HDA analyser mentioned here:
http://www.alsa-project.org/main/index.php/HDA_Analyzer
but no matter what I do, there is no way to get sound from the line out
jack to headphones or powered speakers.
I'm guessing I need one or more obscure options to load the module snd-hda-intel,
but nothing I've tried so far has worked. The kernel documentation does not
mention the mac mini 5,3 the Intel Corporation 6 Series/C200 Series Chipset nor the
combination of Cirrus Logic CS4206 and Intel CougarPoint HDMI - does anybody know
where I might find more details?
Details below:
----------
DMI: Apple Inc. Macmini5,3/Mac-7BA5B2794B2CDB12, BIOS
MM51.88Z.0075.B00.1106271442 06/27/2011
Alsa modules from linux-3.0.3
Alsa-1.0.23
$ lspci -knn
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series
Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Intel Corporation Device [8086:7270]
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
$ aplay -l
**** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel
PCH], device 0: Cirrus Analog [Cirrus Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: Cirrus Digital [Cirrus Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ head -n 1 /proc/asound/card0/codec*
==> /proc/asound/card0/codec#0 <==
Codec: Cirrus Logic CS4206
==> /proc/asound/card0/codec#3 <==
Codec: Intel CougarPoint HDMI
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: No line out on latest Mac Mini
2011-10-22 12:14 No line out on latest Mac Mini John Frankish
@ 2011-10-22 12:18 ` Jérémy Lal
2011-10-22 14:01 ` John Frankish
0 siblings, 1 reply; 5+ messages in thread
From: Jérémy Lal @ 2011-10-22 12:18 UTC (permalink / raw)
To: John Frankish; +Cc: alsa-devel@alsa-project.org
Hi,
i have an imac 12,2 (2011) and i had to change GPIO with hda_analyzer to get some sound
on line out.
Jérémy.
On 22/10/2011 14:14, John Frankish wrote:
> I posted this to the alsa-user list a couple of weeks ago but did not get an answer
>
> I've been trying to get analog line out to work to headphones or
> powered speakers with the latest Mac Mini, but so far the best I've
> managed to achieve is to get the internal speaker to work. Line out
> works with the Mac OS.
>
> I've also tried the HDA analyser mentioned here:
>
> http://www.alsa-project.org/main/index.php/HDA_Analyzer
>
> but no matter what I do, there is no way to get sound from the line out
> jack to headphones or powered speakers.
>
> I'm guessing I need one or more obscure options to load the module snd-hda-intel,
> but nothing I've tried so far has worked. The kernel documentation does not
> mention the mac mini 5,3 the Intel Corporation 6 Series/C200 Series Chipset nor the
> combination of Cirrus Logic CS4206 and Intel CougarPoint HDMI - does anybody know
> where I might find more details?
>
> Details below:
> ----------
> DMI: Apple Inc. Macmini5,3/Mac-7BA5B2794B2CDB12, BIOS
> MM51.88Z.0075.B00.1106271442 06/27/2011
> Alsa modules from linux-3.0.3
> Alsa-1.0.23
>
> $ lspci -knn
> 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series
> Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
> Subsystem: Intel Corporation Device [8086:7270]
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> $ aplay -l
> **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel
> PCH], device 0: Cirrus Analog [Cirrus Analog]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: PCH [HDA Intel PCH], device 1: Cirrus Digital [Cirrus Digital]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
> $ head -n 1 /proc/asound/card0/codec*
> ==> /proc/asound/card0/codec#0 <==
> Codec: Cirrus Logic CS4206
> ==> /proc/asound/card0/codec#3 <==
> Codec: Intel CougarPoint HDMI
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: No line out on latest Mac Mini
2011-10-22 12:18 ` Jérémy Lal
@ 2011-10-22 14:01 ` John Frankish
2011-10-22 15:30 ` Jérémy Lal
0 siblings, 1 reply; 5+ messages in thread
From: John Frankish @ 2011-10-22 14:01 UTC (permalink / raw)
To: alsa-devel@alsa-project.org; +Cc: kapouer@melix.org
> Hi,
> i have an imac 12,2 (2011) and i had to change GPIO with hda_analyzer to get
> some sound on line out.
>
> Jérémy.
Thanks - I see something like this with hda_analyser:
Global Input Amplifier Caps-> <- Global Output Amplifier Caps
GPIO
out-dir enable unsol sticky wake data
[0]
[1] x x [x]
[2]
[3] x x x
..where [1] data enables/disables line out and [3] data enables/disables the internal speaker.
[1] data was not checked and doing so got things working - a big thank you for this.
Line out continues to work after closing hda_analyser, but do you know what it actually changes so I
Can make it permanent across reboots?
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: No line out on latest Mac Mini
2011-10-22 14:01 ` John Frankish
@ 2011-10-22 15:30 ` Jérémy Lal
2011-10-31 13:05 ` John Frankish
0 siblings, 1 reply; 5+ messages in thread
From: Jérémy Lal @ 2011-10-22 15:30 UTC (permalink / raw)
To: John Frankish; +Cc: alsa-devel@alsa-project.org
On 22/10/2011 16:01, John Frankish wrote:
>> Hi,
>> i have an imac 12,2 (2011) and i had to change GPIO with hda_analyzer to get
>> some sound on line out.
>>
>> Jérémy.
>
> Thanks - I see something like this with hda_analyser:
>
> Global Input Amplifier Caps-> <- Global Output Amplifier Caps
>
> GPIO
> out-dir enable unsol sticky wake data
> [0]
> [1] x x [x]
> [2]
> [3] x x x
>
> ..where [1] data enables/disables line out and [3] data enables/disables the internal speaker.
> [1] data was not checked and doing so got things working - a big thank you for this.
>
> Line out continues to work after closing hda_analyser, but do you know what it actually changes so I
> Can make it permanent across reboots?
A patch that applies to recent kernels :
https://gist.github.com/1306112
The pincfg won't probably apply for you -- but it show how you can hack something.
Jérémy.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: No line out on latest Mac Mini
2011-10-22 15:30 ` Jérémy Lal
@ 2011-10-31 13:05 ` John Frankish
0 siblings, 0 replies; 5+ messages in thread
From: John Frankish @ 2011-10-31 13:05 UTC (permalink / raw)
To: alsa-devel@alsa-project.org; +Cc: kapouer@melix.org
> On 22/10/2011 16:01, John Frankish wrote:
> >> Hi,
> >> i have an imac 12,2 (2011) and i had to change GPIO with hda_analyzer
> >> to get some sound on line out.
> >>
> >> Jérémy.
> >
> > Thanks - I see something like this with hda_analyser:
> >
> > Global Input Amplifier Caps-> <- Global Output Amplifier Caps
> >
> > GPIO
> > out-dir enable unsol sticky wake data [0]
> > [1] x x [x]
> > [2]
> > [3] x x x
> >
> > ..where [1] data enables/disables line out and [3] data enables/disables the
> internal speaker.
> > [1] data was not checked and doing so got things working - a big thank you
> for this.
> >
> > Line out continues to work after closing hda_analyser, but do you know
> > what it actually changes so I Can make it permanent across reboots?
>
> A patch that applies to recent kernels :
> https://gist.github.com/1306112
>
> The pincfg won't probably apply for you -- but it show how you can hack
> something.
>
Thanks - I had a go at making a patch, but couldn't get things to work.
Is there a howto anywhere?
Otherwise, I guess I'll have to wait for a later version of alsa...
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-10-31 13:05 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-22 12:14 No line out on latest Mac Mini John Frankish
2011-10-22 12:18 ` Jérémy Lal
2011-10-22 14:01 ` John Frankish
2011-10-22 15:30 ` Jérémy Lal
2011-10-31 13:05 ` John Frankish
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.