From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>,
linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
ralf@linux-mips.org, r0bertz@gentoo.org, netdev@vger.kernel.org
Subject: Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
Date: Wed, 26 Oct 2011 09:20:55 +0200 [thread overview]
Message-ID: <4EA7B4D7.9000101@st.com> (raw)
In-Reply-To: <CAJhJPsU3KMNuGcKaKf3H4pUCeu1+vnEz4DgO_jbm+wDQb1G4OA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4725 bytes --]
Hello Kelvin
On 10/26/2011 6:27 AM, Kelvin Cheung wrote:
> Hi Giuseppe,
>
> This patch works well on Loongson1B platform except one thing.
> The rx checksum offload of normal descriptor is disabled by default.
> So, I enabled this functon. And one minor tweak is added to your patch.
> What about your opinion?
Yes, I had not enabled the rx coe. I'm resending your patch (v3) where I
fixed a problem. Old mac10/100 has no rx csum in HW. So I added an extra
check.
Let me consider it the final version. ;-)
Thanks a lot for you effort.
I'll send it for net-next now.
Regards
Peppe
>
> BTW, tx checksum insertion works now.
>
> 2011/10/25, Giuseppe CAVALLARO <peppe.cavallaro@st.com>:
>> On 10/25/2011 9:09 AM, Giuseppe CAVALLARO wrote:
>>> On 10/25/2011 4:12 AM, Kelvin Cheung wrote:
>>>> 2011/10/24, Giuseppe CAVALLARO <peppe.cavallaro@st.com>:
>>>>> On 10/24/2011 4:05 PM, Kelvin Cheung wrote:
>>>>>> 2011/10/24, Giuseppe CAVALLARO <peppe.cavallaro@st.com>:
>>>>>>> Hello Kelvin.
>>>>>>>
>>>>>>> On 10/24/2011 12:36 PM, Kelvin Cheung wrote:
>>>>>>>
>>>>>>> [snip]
>>>>>>>
>>>>>>>> According to datasheet of Loongson 1B, the buffer size in RX/TX
>>>>>>>> descriptor is only 2KB. So the Loongson1B's GMAC could not handle
>>>>>>>> jumbo frames. And the second buffer is useless in this case. Am I
>>>>>>>> right? Is there a better way than ifdef CONFIG_MACH_LOONGSON1 to
>>>>>>>> avoid duplicate code?
>>>>>>>
>>>>>>> Sorry for my misunderstanding.
>>>>>>>
>>>>>>> I think you have to use the normal descriptor and remove the enh_desc
>>>>>>> from the platform w/o modifying the driver at all.
>>>>>>>
>>>>>>> The driver will be able to select/configure all automatically (also
>>>>>>> jumbo).
>>>>>>>
>>>>>>> Let me know.
>>>>>>
>>>>>> That's the problem.
>>>>>> The bitfield definition of Loongson1B is also different from normal
>>>>>> descriptor.
>>>>>
>>>>> The problem is not in the Loongson1B gmac.
>>>>
>>>> I found that the bit checksum_insertion is not existed in normal
>>>> descriptor.
>>>>
>>>>> The normal descriptor fields in the stmmac refer to an old synopsys
>>>>> databook.
>>>>
>>>> Could you send me the new databook of Synopsys GMAC?
>>>>
>>>>> New chips have the same structure you have added; so we should fix this
>>>>> in the driver w/o breaking the compatibility for old chips.
>>>>
>>>> Agree.
>>>>
>>>>> I kindly ask you to confirm if the currently normal descriptor structure
>>>>> (w/o your changes) doesn't work on your platform.
>>>>> Did you test it?
>>>>
>>>> Well, the normal descriptor works on my platform except TX checksum
>>>> offload.
>>>
>>> ok! I suspected that.
>>>
>>>
>>>>>> Moreover, I want to enable the TX checksum offload function which is
>>>>>> not supported in normal descriptor.
>>>>>> Any suggestions?
>>>>>
>>>>> It is supported but you have to pass from the platform: tx_coe = 1.
>>>>
>>>> I noticed that the flag csum_insertion is passed to
>>>> ndesc_prepare_tx_desc() in stmmac_xmit(). But ndesc_prepare_tx_desc()
>>>> just ignores it.
>>>> In other words, the TX checksum offload function is disabled in normal
>>>> descriptor currently.
>>>>
>>>> Should we fix this problem for normal descriptor?
>>>
>>> Yes, we should. If you agree, I'll update the normal descriptor
>>> structure to yours. This is the normal descriptor used in newer GMAC.
>>> Tx csum will be done for normal descriptors in case of these GMAC
>>> devices and not for old MAC10/100. For the MAC10/100 some bits for
>>> normal descriptors are reserved and won't be used at all.
>>>
>>> I'll also verify that the patch doesn't break the back-compatibility
>>> with old MAC10/100. I have the HW where doing the tests.
>>>
>>> After that, I'll prepare the patch for net-next and for your kernel.
>>
>> Hello Kelvin
>>
>> attached the patch tested on my development kernel.
>> It runs fine on old and new mac devices.
>>
>> Can you try it on your side? Hmm, it is likely it won't apply fine on
>> your tree but you know the changes ;-).
>>
>> If ok, I'll rework it for net-next and send it to the mailing list.
>>
>> Thanks
>> Peppe
>>
>>>
>>>>
>>>>> Peppe
>>>>>>
>>>>>>> Note:
>>>>>>> IIRC, there is a bit difference in case of normal descriptors for
>>>>>>> Synopsys databook newer than the 1.91 (I used for testing this mode).
>>>>>>> In any case, I remember that, on some platforms, the normal
>>>>>>> descriptors
>>>>>>> have been used w/o problems also on these new chip generations.
>>>>>>>
>>>>>>> Peppe
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>>
>
>
[-- Attachment #2: 0001-stmmac-update-normal-descriptor-structure-v3.patch --]
[-- Type: text/x-patch, Size: 8441 bytes --]
>From 324c8e56e728046590bae14d14e8ff09978b71b4 Mon Sep 17 00:00:00 2001
From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Date: Tue, 25 Oct 2011 09:46:41 +0200
Subject: [PATCH (sh-2.6.32.y)] stmmac: update normal descriptor structure
(v3)
This patch updates the normal descriptor structure
to work fine on new GMAC Synopsys chips.
Normal descriptors were designed on the old MAC10/100
databook 1.91 where some bits were reserved: for example
the tx checksum insertion and rx checksum offload.
The patch maintains the back-compatibility with old
MAC devices (tested on STx7109 MAC10/100) and adds new
fields that actually new GMAC devices can use.
For example, STx7109 will pass from the platform
tx_coe = 0, enh_desc = 0, has_gmac = 0.
A platform like Loongson1B (Mips) will pass:
tx_coe = 1, enh_desc = 0, has_gmac = 1.
Thanks to Kelvin, he enhanced the normal descriptors for
GMAC on Loongson1B.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/stmmac/common.h | 8 +++---
drivers/net/stmmac/descs.h | 31 +++++++++++++++-----------
drivers/net/stmmac/norm_desc.c | 40 ++++++++++++++++++++--------------
drivers/net/stmmac/stmmac_ethtool.c | 8 +++---
drivers/net/stmmac/stmmac_main.c | 4 +-
5 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index 9100c10..2cc1192 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -49,7 +49,7 @@ struct stmmac_extra_stats {
unsigned long tx_underflow ____cacheline_aligned;
unsigned long tx_carrier;
unsigned long tx_losscarrier;
- unsigned long tx_heartbeat;
+ unsigned long vlan_tag;
unsigned long tx_deferred;
unsigned long tx_vlan;
unsigned long tx_jabber;
@@ -58,9 +58,9 @@ struct stmmac_extra_stats {
unsigned long tx_ip_header_error;
/* Receive errors */
unsigned long rx_desc;
- unsigned long rx_partial;
- unsigned long rx_runt;
- unsigned long rx_toolong;
+ unsigned long sa_filter_fail;
+ unsigned long overflow_error;
+ unsigned long ipc_csum_error;
unsigned long rx_collision;
unsigned long rx_crc;
unsigned long rx_length;
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h
index 63a03e2..9820ec8 100644
--- a/drivers/net/stmmac/descs.h
+++ b/drivers/net/stmmac/descs.h
@@ -25,33 +25,34 @@ struct dma_desc {
union {
struct {
/* RDES0 */
- u32 reserved1:1;
+ u32 payload_csum_error:1;
u32 crc_error:1;
u32 dribbling:1;
u32 mii_error:1;
u32 receive_watchdog:1;
u32 frame_type:1;
u32 collision:1;
- u32 frame_too_long:1;
+ u32 ipc_csum_error:1;
u32 last_descriptor:1;
u32 first_descriptor:1;
- u32 multicast_frame:1;
- u32 run_frame:1;
+ u32 vlan_tag:1;
+ u32 overflow_error:1;
u32 length_error:1;
- u32 partial_frame_error:1;
+ u32 sa_filter_fail:1;
u32 descriptor_error:1;
u32 error_summary:1;
u32 frame_length:14;
- u32 filtering_fail:1;
+ u32 da_filter_fail:1;
u32 own:1;
/* RDES1 */
u32 buffer1_size:11;
u32 buffer2_size:11;
- u32 reserved2:2;
+ u32 reserved1:2;
u32 second_address_chained:1;
u32 end_ring:1;
- u32 reserved3:5;
+ u32 reserved2:5;
u32 disable_ic:1;
+
} rx;
struct {
/* RDES0 */
@@ -91,24 +92,28 @@ struct dma_desc {
u32 underflow_error:1;
u32 excessive_deferral:1;
u32 collision_count:4;
- u32 heartbeat_fail:1;
+ u32 vlan_frame:1;
u32 excessive_collisions:1;
u32 late_collision:1;
u32 no_carrier:1;
u32 loss_carrier:1;
- u32 reserved1:3;
+ u32 payload_error:1;
+ u32 frame_flushed:1;
+ u32 jabber_timeout:1;
u32 error_summary:1;
- u32 reserved2:15;
+ u32 ip_header_error:1;
+ u32 time_stamp_status:1;
+ u32 reserved1:13;
u32 own:1;
/* TDES1 */
u32 buffer1_size:11;
u32 buffer2_size:11;
- u32 reserved3:1;
+ u32 time_stamp_enable:1;
u32 disable_padding:1;
u32 second_address_chained:1;
u32 end_ring:1;
u32 crc_disable:1;
- u32 reserved4:2;
+ u32 checksum_insertion:2;
u32 first_segment:1;
u32 last_segment:1;
u32 interrupt:1;
diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/stmmac/norm_desc.c
index f7e8ba7..3955ae7 100644
--- a/drivers/net/stmmac/norm_desc.c
+++ b/drivers/net/stmmac/norm_desc.c
@@ -50,11 +50,12 @@ static int ndesc_get_tx_status(void *data, struct stmmac_extra_stats *x,
stats->collisions += p->des01.tx.collision_count;
ret = -1;
}
- if (unlikely(p->des01.tx.heartbeat_fail)) {
- x->tx_heartbeat++;
- stats->tx_heartbeat_errors++;
- ret = -1;
- }
+
+ if (p->des01.etx.vlan_frame) {
+ CHIP_DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
+ x->tx_vlan++;
+ }
+
if (unlikely(p->des01.tx.deferred))
x->tx_deferred++;
@@ -68,12 +69,12 @@ static int ndesc_get_tx_len(struct dma_desc *p)
/* This function verifies if each incoming frame has some errors
* and, if required, updates the multicast statistics.
- * In case of success, it returns csum_none because the device
- * is not able to compute the csum in HW. */
+ * In case of success, it returns good_frame because the GMAC device
+ * is supposed to be able to compute the csum in HW. */
static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
struct dma_desc *p)
{
- int ret = csum_none;
+ int ret = good_frame;
struct net_device_stats *stats = (struct net_device_stats *)data;
if (unlikely(p->des01.rx.last_descriptor == 0)) {
@@ -86,12 +87,12 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
if (unlikely(p->des01.rx.error_summary)) {
if (unlikely(p->des01.rx.descriptor_error))
x->rx_desc++;
- if (unlikely(p->des01.rx.partial_frame_error))
- x->rx_partial++;
- if (unlikely(p->des01.rx.run_frame))
- x->rx_runt++;
- if (unlikely(p->des01.rx.frame_too_long))
- x->rx_toolong++;
+ if (unlikely(p->des01.rx.sa_filter_fail))
+ x->sa_filter_fail++;
+ if (unlikely(p->des01.rx.overflow_error))
+ x->overflow_error++;
+ if (unlikely(p->des01.rx.ipc_csum_error))
+ x->ipc_csum_error++;
if (unlikely(p->des01.rx.collision)) {
x->rx_collision++;
stats->collisions++;
@@ -113,10 +114,12 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
x->rx_mii++;
ret = discard_frame;
}
- if (p->des01.rx.multicast_frame) {
- x->rx_multicast++;
- stats->multicast++;
+#ifdef STMMAC_VLAN_TAG_USED
+ if (p->des01.rx.vlan_tag) {
+ x->vlan_tag++;
+ stats->vlan_tag++;
}
+#endif
return ret;
}
@@ -184,6 +187,9 @@ static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
{
p->des01.tx.first_segment = is_fs;
norm_set_tx_desc_len(p, len);
+
+ if (likely(csum_flag))
+ p->des01.tx.checksum_insertion = cic_full;
}
static void ndesc_clear_tx_ic(struct dma_desc *p)
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index d81cf20..6831cf2 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -48,7 +48,7 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
STMMAC_STAT(tx_underflow),
STMMAC_STAT(tx_carrier),
STMMAC_STAT(tx_losscarrier),
- STMMAC_STAT(tx_heartbeat),
+ STMMAC_STAT(vlan_tag),
STMMAC_STAT(tx_deferred),
STMMAC_STAT(tx_vlan),
STMMAC_STAT(rx_vlan),
@@ -57,9 +57,9 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
STMMAC_STAT(tx_payload_error),
STMMAC_STAT(tx_ip_header_error),
STMMAC_STAT(rx_desc),
- STMMAC_STAT(rx_partial),
- STMMAC_STAT(rx_runt),
- STMMAC_STAT(rx_toolong),
+ STMMAC_STAT(sa_filter_fail),
+ STMMAC_STAT(overflow_error),
+ STMMAC_STAT(ipc_csum_error),
STMMAC_STAT(rx_collision),
STMMAC_STAT(rx_crc),
STMMAC_STAT(rx_length),
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 3a3efb1..18e614b 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1318,8 +1318,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
#endif
skb->protocol = eth_type_trans(skb, priv->dev);
- if (unlikely(status == csum_none)) {
- /* always for the old mac 10/100 */
+ if (unlikely(!priv->plat->has_gmac)) {
+ /* No csum for the old mac 10/100 devices */
skb->ip_summed = CHECKSUM_NONE;
netif_receive_skb(skb);
} else {
--
1.7.4.4
WARNING: multiple messages have this Message-ID (diff)
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>,
linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
ralf@linux-mips.org, r0bertz@gentoo.org, netdev@vger.kernel.org
Subject: Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
Date: Wed, 26 Oct 2011 09:20:55 +0200 [thread overview]
Message-ID: <4EA7B4D7.9000101@st.com> (raw)
Message-ID: <20111026072055.8bbCpXrmBKHFS9fkfclvpU6gT47Rk74KXwieRzFKkZg@z> (raw)
In-Reply-To: <CAJhJPsU3KMNuGcKaKf3H4pUCeu1+vnEz4DgO_jbm+wDQb1G4OA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4725 bytes --]
Hello Kelvin
On 10/26/2011 6:27 AM, Kelvin Cheung wrote:
> Hi Giuseppe,
>
> This patch works well on Loongson1B platform except one thing.
> The rx checksum offload of normal descriptor is disabled by default.
> So, I enabled this functon. And one minor tweak is added to your patch.
> What about your opinion?
Yes, I had not enabled the rx coe. I'm resending your patch (v3) where I
fixed a problem. Old mac10/100 has no rx csum in HW. So I added an extra
check.
Let me consider it the final version. ;-)
Thanks a lot for you effort.
I'll send it for net-next now.
Regards
Peppe
>
> BTW, tx checksum insertion works now.
>
> 2011/10/25, Giuseppe CAVALLARO <peppe.cavallaro@st.com>:
>> On 10/25/2011 9:09 AM, Giuseppe CAVALLARO wrote:
>>> On 10/25/2011 4:12 AM, Kelvin Cheung wrote:
>>>> 2011/10/24, Giuseppe CAVALLARO <peppe.cavallaro@st.com>:
>>>>> On 10/24/2011 4:05 PM, Kelvin Cheung wrote:
>>>>>> 2011/10/24, Giuseppe CAVALLARO <peppe.cavallaro@st.com>:
>>>>>>> Hello Kelvin.
>>>>>>>
>>>>>>> On 10/24/2011 12:36 PM, Kelvin Cheung wrote:
>>>>>>>
>>>>>>> [snip]
>>>>>>>
>>>>>>>> According to datasheet of Loongson 1B, the buffer size in RX/TX
>>>>>>>> descriptor is only 2KB. So the Loongson1B's GMAC could not handle
>>>>>>>> jumbo frames. And the second buffer is useless in this case. Am I
>>>>>>>> right? Is there a better way than ifdef CONFIG_MACH_LOONGSON1 to
>>>>>>>> avoid duplicate code?
>>>>>>>
>>>>>>> Sorry for my misunderstanding.
>>>>>>>
>>>>>>> I think you have to use the normal descriptor and remove the enh_desc
>>>>>>> from the platform w/o modifying the driver at all.
>>>>>>>
>>>>>>> The driver will be able to select/configure all automatically (also
>>>>>>> jumbo).
>>>>>>>
>>>>>>> Let me know.
>>>>>>
>>>>>> That's the problem.
>>>>>> The bitfield definition of Loongson1B is also different from normal
>>>>>> descriptor.
>>>>>
>>>>> The problem is not in the Loongson1B gmac.
>>>>
>>>> I found that the bit checksum_insertion is not existed in normal
>>>> descriptor.
>>>>
>>>>> The normal descriptor fields in the stmmac refer to an old synopsys
>>>>> databook.
>>>>
>>>> Could you send me the new databook of Synopsys GMAC?
>>>>
>>>>> New chips have the same structure you have added; so we should fix this
>>>>> in the driver w/o breaking the compatibility for old chips.
>>>>
>>>> Agree.
>>>>
>>>>> I kindly ask you to confirm if the currently normal descriptor structure
>>>>> (w/o your changes) doesn't work on your platform.
>>>>> Did you test it?
>>>>
>>>> Well, the normal descriptor works on my platform except TX checksum
>>>> offload.
>>>
>>> ok! I suspected that.
>>>
>>>
>>>>>> Moreover, I want to enable the TX checksum offload function which is
>>>>>> not supported in normal descriptor.
>>>>>> Any suggestions?
>>>>>
>>>>> It is supported but you have to pass from the platform: tx_coe = 1.
>>>>
>>>> I noticed that the flag csum_insertion is passed to
>>>> ndesc_prepare_tx_desc() in stmmac_xmit(). But ndesc_prepare_tx_desc()
>>>> just ignores it.
>>>> In other words, the TX checksum offload function is disabled in normal
>>>> descriptor currently.
>>>>
>>>> Should we fix this problem for normal descriptor?
>>>
>>> Yes, we should. If you agree, I'll update the normal descriptor
>>> structure to yours. This is the normal descriptor used in newer GMAC.
>>> Tx csum will be done for normal descriptors in case of these GMAC
>>> devices and not for old MAC10/100. For the MAC10/100 some bits for
>>> normal descriptors are reserved and won't be used at all.
>>>
>>> I'll also verify that the patch doesn't break the back-compatibility
>>> with old MAC10/100. I have the HW where doing the tests.
>>>
>>> After that, I'll prepare the patch for net-next and for your kernel.
>>
>> Hello Kelvin
>>
>> attached the patch tested on my development kernel.
>> It runs fine on old and new mac devices.
>>
>> Can you try it on your side? Hmm, it is likely it won't apply fine on
>> your tree but you know the changes ;-).
>>
>> If ok, I'll rework it for net-next and send it to the mailing list.
>>
>> Thanks
>> Peppe
>>
>>>
>>>>
>>>>> Peppe
>>>>>>
>>>>>>> Note:
>>>>>>> IIRC, there is a bit difference in case of normal descriptors for
>>>>>>> Synopsys databook newer than the 1.91 (I used for testing this mode).
>>>>>>> In any case, I remember that, on some platforms, the normal
>>>>>>> descriptors
>>>>>>> have been used w/o problems also on these new chip generations.
>>>>>>>
>>>>>>> Peppe
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>>
>
>
[-- Attachment #2: 0001-stmmac-update-normal-descriptor-structure-v3.patch --]
[-- Type: text/x-patch, Size: 8440 bytes --]
From 324c8e56e728046590bae14d14e8ff09978b71b4 Mon Sep 17 00:00:00 2001
From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Date: Tue, 25 Oct 2011 09:46:41 +0200
Subject: [PATCH (sh-2.6.32.y)] stmmac: update normal descriptor structure
(v3)
This patch updates the normal descriptor structure
to work fine on new GMAC Synopsys chips.
Normal descriptors were designed on the old MAC10/100
databook 1.91 where some bits were reserved: for example
the tx checksum insertion and rx checksum offload.
The patch maintains the back-compatibility with old
MAC devices (tested on STx7109 MAC10/100) and adds new
fields that actually new GMAC devices can use.
For example, STx7109 will pass from the platform
tx_coe = 0, enh_desc = 0, has_gmac = 0.
A platform like Loongson1B (Mips) will pass:
tx_coe = 1, enh_desc = 0, has_gmac = 1.
Thanks to Kelvin, he enhanced the normal descriptors for
GMAC on Loongson1B.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/stmmac/common.h | 8 +++---
drivers/net/stmmac/descs.h | 31 +++++++++++++++-----------
drivers/net/stmmac/norm_desc.c | 40 ++++++++++++++++++++--------------
drivers/net/stmmac/stmmac_ethtool.c | 8 +++---
drivers/net/stmmac/stmmac_main.c | 4 +-
5 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index 9100c10..2cc1192 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -49,7 +49,7 @@ struct stmmac_extra_stats {
unsigned long tx_underflow ____cacheline_aligned;
unsigned long tx_carrier;
unsigned long tx_losscarrier;
- unsigned long tx_heartbeat;
+ unsigned long vlan_tag;
unsigned long tx_deferred;
unsigned long tx_vlan;
unsigned long tx_jabber;
@@ -58,9 +58,9 @@ struct stmmac_extra_stats {
unsigned long tx_ip_header_error;
/* Receive errors */
unsigned long rx_desc;
- unsigned long rx_partial;
- unsigned long rx_runt;
- unsigned long rx_toolong;
+ unsigned long sa_filter_fail;
+ unsigned long overflow_error;
+ unsigned long ipc_csum_error;
unsigned long rx_collision;
unsigned long rx_crc;
unsigned long rx_length;
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h
index 63a03e2..9820ec8 100644
--- a/drivers/net/stmmac/descs.h
+++ b/drivers/net/stmmac/descs.h
@@ -25,33 +25,34 @@ struct dma_desc {
union {
struct {
/* RDES0 */
- u32 reserved1:1;
+ u32 payload_csum_error:1;
u32 crc_error:1;
u32 dribbling:1;
u32 mii_error:1;
u32 receive_watchdog:1;
u32 frame_type:1;
u32 collision:1;
- u32 frame_too_long:1;
+ u32 ipc_csum_error:1;
u32 last_descriptor:1;
u32 first_descriptor:1;
- u32 multicast_frame:1;
- u32 run_frame:1;
+ u32 vlan_tag:1;
+ u32 overflow_error:1;
u32 length_error:1;
- u32 partial_frame_error:1;
+ u32 sa_filter_fail:1;
u32 descriptor_error:1;
u32 error_summary:1;
u32 frame_length:14;
- u32 filtering_fail:1;
+ u32 da_filter_fail:1;
u32 own:1;
/* RDES1 */
u32 buffer1_size:11;
u32 buffer2_size:11;
- u32 reserved2:2;
+ u32 reserved1:2;
u32 second_address_chained:1;
u32 end_ring:1;
- u32 reserved3:5;
+ u32 reserved2:5;
u32 disable_ic:1;
+
} rx;
struct {
/* RDES0 */
@@ -91,24 +92,28 @@ struct dma_desc {
u32 underflow_error:1;
u32 excessive_deferral:1;
u32 collision_count:4;
- u32 heartbeat_fail:1;
+ u32 vlan_frame:1;
u32 excessive_collisions:1;
u32 late_collision:1;
u32 no_carrier:1;
u32 loss_carrier:1;
- u32 reserved1:3;
+ u32 payload_error:1;
+ u32 frame_flushed:1;
+ u32 jabber_timeout:1;
u32 error_summary:1;
- u32 reserved2:15;
+ u32 ip_header_error:1;
+ u32 time_stamp_status:1;
+ u32 reserved1:13;
u32 own:1;
/* TDES1 */
u32 buffer1_size:11;
u32 buffer2_size:11;
- u32 reserved3:1;
+ u32 time_stamp_enable:1;
u32 disable_padding:1;
u32 second_address_chained:1;
u32 end_ring:1;
u32 crc_disable:1;
- u32 reserved4:2;
+ u32 checksum_insertion:2;
u32 first_segment:1;
u32 last_segment:1;
u32 interrupt:1;
diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/stmmac/norm_desc.c
index f7e8ba7..3955ae7 100644
--- a/drivers/net/stmmac/norm_desc.c
+++ b/drivers/net/stmmac/norm_desc.c
@@ -50,11 +50,12 @@ static int ndesc_get_tx_status(void *data, struct stmmac_extra_stats *x,
stats->collisions += p->des01.tx.collision_count;
ret = -1;
}
- if (unlikely(p->des01.tx.heartbeat_fail)) {
- x->tx_heartbeat++;
- stats->tx_heartbeat_errors++;
- ret = -1;
- }
+
+ if (p->des01.etx.vlan_frame) {
+ CHIP_DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
+ x->tx_vlan++;
+ }
+
if (unlikely(p->des01.tx.deferred))
x->tx_deferred++;
@@ -68,12 +69,12 @@ static int ndesc_get_tx_len(struct dma_desc *p)
/* This function verifies if each incoming frame has some errors
* and, if required, updates the multicast statistics.
- * In case of success, it returns csum_none because the device
- * is not able to compute the csum in HW. */
+ * In case of success, it returns good_frame because the GMAC device
+ * is supposed to be able to compute the csum in HW. */
static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
struct dma_desc *p)
{
- int ret = csum_none;
+ int ret = good_frame;
struct net_device_stats *stats = (struct net_device_stats *)data;
if (unlikely(p->des01.rx.last_descriptor == 0)) {
@@ -86,12 +87,12 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
if (unlikely(p->des01.rx.error_summary)) {
if (unlikely(p->des01.rx.descriptor_error))
x->rx_desc++;
- if (unlikely(p->des01.rx.partial_frame_error))
- x->rx_partial++;
- if (unlikely(p->des01.rx.run_frame))
- x->rx_runt++;
- if (unlikely(p->des01.rx.frame_too_long))
- x->rx_toolong++;
+ if (unlikely(p->des01.rx.sa_filter_fail))
+ x->sa_filter_fail++;
+ if (unlikely(p->des01.rx.overflow_error))
+ x->overflow_error++;
+ if (unlikely(p->des01.rx.ipc_csum_error))
+ x->ipc_csum_error++;
if (unlikely(p->des01.rx.collision)) {
x->rx_collision++;
stats->collisions++;
@@ -113,10 +114,12 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
x->rx_mii++;
ret = discard_frame;
}
- if (p->des01.rx.multicast_frame) {
- x->rx_multicast++;
- stats->multicast++;
+#ifdef STMMAC_VLAN_TAG_USED
+ if (p->des01.rx.vlan_tag) {
+ x->vlan_tag++;
+ stats->vlan_tag++;
}
+#endif
return ret;
}
@@ -184,6 +187,9 @@ static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
{
p->des01.tx.first_segment = is_fs;
norm_set_tx_desc_len(p, len);
+
+ if (likely(csum_flag))
+ p->des01.tx.checksum_insertion = cic_full;
}
static void ndesc_clear_tx_ic(struct dma_desc *p)
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index d81cf20..6831cf2 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -48,7 +48,7 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
STMMAC_STAT(tx_underflow),
STMMAC_STAT(tx_carrier),
STMMAC_STAT(tx_losscarrier),
- STMMAC_STAT(tx_heartbeat),
+ STMMAC_STAT(vlan_tag),
STMMAC_STAT(tx_deferred),
STMMAC_STAT(tx_vlan),
STMMAC_STAT(rx_vlan),
@@ -57,9 +57,9 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
STMMAC_STAT(tx_payload_error),
STMMAC_STAT(tx_ip_header_error),
STMMAC_STAT(rx_desc),
- STMMAC_STAT(rx_partial),
- STMMAC_STAT(rx_runt),
- STMMAC_STAT(rx_toolong),
+ STMMAC_STAT(sa_filter_fail),
+ STMMAC_STAT(overflow_error),
+ STMMAC_STAT(ipc_csum_error),
STMMAC_STAT(rx_collision),
STMMAC_STAT(rx_crc),
STMMAC_STAT(rx_length),
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 3a3efb1..18e614b 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1318,8 +1318,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
#endif
skb->protocol = eth_type_trans(skb, priv->dev);
- if (unlikely(status == csum_none)) {
- /* always for the old mac 10/100 */
+ if (unlikely(!priv->plat->has_gmac)) {
+ /* No csum for the old mac 10/100 devices */
skb->ip_summed = CHECKSUM_NONE;
netif_receive_skb(skb);
} else {
--
1.7.4.4
next prev parent reply other threads:[~2011-10-26 7:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-21 10:28 [PATCH V2 1/4] MIPS: Add CPU support for Loongson1B keguang.zhang
2011-10-21 10:28 ` [PATCH V2 2/4] MIPS: Add board " keguang.zhang
2011-10-21 17:33 ` Wu Zhangjin
2011-10-24 7:19 ` Giuseppe CAVALLARO
2011-10-24 10:36 ` Kelvin Cheung
2011-10-24 12:18 ` Giuseppe CAVALLARO
2011-10-24 14:05 ` Kelvin Cheung
2011-10-24 15:35 ` Giuseppe CAVALLARO
2011-10-25 2:12 ` Kelvin Cheung
2011-10-25 7:09 ` Giuseppe CAVALLARO
2011-10-25 8:20 ` Giuseppe CAVALLARO
2011-10-25 8:20 ` Giuseppe CAVALLARO
2011-10-25 9:21 ` Kelvin Cheung
2011-10-26 4:27 ` Kelvin Cheung
2011-10-26 7:20 ` Giuseppe CAVALLARO [this message]
2011-10-26 7:20 ` Giuseppe CAVALLARO
2011-10-26 7:48 ` Kelvin Cheung
2011-10-25 9:18 ` Kelvin Cheung
2011-11-16 14:10 ` Ralf Baechle
2011-10-21 10:28 ` [PATCH V2 3/4] MIPS: Add Makefile and Kconfig " keguang.zhang
2011-10-21 10:28 ` [PATCH V2 4/4] MIPS: Add defconfig " keguang.zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EA7B4D7.9000101@st.com \
--to=peppe.cavallaro@st.com \
--cc=keguang.zhang@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=netdev@vger.kernel.org \
--cc=r0bertz@gentoo.org \
--cc=ralf@linux-mips.org \
--cc=wuzhangjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.