[Xenomai-help] kernel compilation error

[Xenomai-help] kernel compilation error

[Łukasz Sacha]

Hello again:

luke@domain.hid$ make ARCH=arm
CROSS_COMPILE=arm-none-linux-gnueabi-
...
  CC      arch/arm/kernel/fiq.o
arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
make[1]: *** [arch/arm/kernel/fiq.o] Error 1
make: *** [arch/arm/kernel] Error 2
luke@domain.hid$

This is how it looks like
80:void set_fiq_handler(void *start, unsigned int length)
81:{
82:#if defined(CONFIG_CPU_USE_DOMAINS)
83:        memcpy((void *)0xffff001c, start, length);
84:#else
85:        memcpy(vectors_page + 0x1c, start, length);
86:#endif
87:        flush_icache_range(0xffff001c, 0xffff001c + length);
88:        if (!vectors_high())
89:                flush_icache_range(0x1c, 0x1c + length);
90:}

Any ideas?
--
Łukasz Dragilla Sacha

Re: [Xenomai-help] kernel compilation error

[Łukasz Sacha]

On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
> Hello again:
>
> luke@domain.hid$ make ARCH=arm
> CROSS_COMPILE=arm-none-linux-gnueabi-
> ...
>  CC      arch/arm/kernel/fiq.o
> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
> make: *** [arch/arm/kernel] Error 2
> luke@domain.hid$
>
> This is how it looks like
> 80:void set_fiq_handler(void *start, unsigned int length)
> 81:{
> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
> 83:        memcpy((void *)0xffff001c, start, length);
> 84:#else
> 85:        memcpy(vectors_page + 0x1c, start, length);
> 86:#endif
> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
> 88:        if (!vectors_high())
> 89:                flush_icache_range(0x1c, 0x1c + length);
> 90:}
>
> Any ideas?

Please take a look at this as this is piece of code the adeos i-pipe
patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
modifies : in line 819.

If you can't help nobody can :/

regards,
--
Łukasz Dragilla Sacha

Re: [Xenomai-help] kernel compilation error

[Gilles Chanteperdrix]

On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
>> Hello again:
>>
>> luke@domain.hid$ make ARCH=arm
>> CROSS_COMPILE=arm-none-linux-gnueabi-
>> ...
>>  CC      arch/arm/kernel/fiq.o
>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>> make: *** [arch/arm/kernel] Error 2
>> luke@domain.hid$
>>
>> This is how it looks like
>> 80:void set_fiq_handler(void *start, unsigned int length)
>> 81:{
>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>> 83:        memcpy((void *)0xffff001c, start, length);
>> 84:#else
>> 85:        memcpy(vectors_page + 0x1c, start, length);
>> 86:#endif
>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>> 88:        if (!vectors_high())
>> 89:                flush_icache_range(0x1c, 0x1c + length);
>> 90:}
>>
>> Any ideas?
> 
> Please take a look at this as this is piece of code the adeos i-pipe
> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
> modifies : in line 819.

Please post your .config.

-- 
                                                                Gilles.

Re: [Xenomai-help] kernel compilation error

[Łukasz Sacha]

[-- Attachment #1: Type: text/plain, Size: 2638 bytes --]

Attached you will find my config and also all the patches I applied
bfore running the xenomai kernel script.
The patches were applied in the following order:

PATCH_nand_base_Always_initialise_oob_poi_before_writing_OOB_data.diff
PATCH_1_4_s3c2440_mini2440_Add_support_for_new_LCD_panels.diff
PATCH_2_4_s3c2440_mini2440_Add_touchscreen_support_for_mini2440.diff
PATCH_3_4_s3c2440_mini2440_Select_touchscreen_by_default.diff
PATCH_4_4_s3c2440_mini2440_Use_leds-gpio_driver_for_board_leds_handling.diff
Drop_exporting_s3c24xx_ts_set_platdata.diff
fix_gpio_register.diff
speed_up_NAND_mounting.diff
make_all_const.diff
PATCH_1_1_nand_Fix_S3C_NAND_clock_stop.diff
remove_device_file.diff
make_debug_decision_const.diff
just_a_cleanup.diff
enable_screen_without_console.diff
add_hwmon.diff
fix_ts_race.diff
fix_backlight_GPIO_handling.diff
set-marker.diff

regards,
--
Łukasz Dragilla Sacha



On Tue, Nov 1, 2011 at 18:19, Gilles Chanteperdrix
<gilles.chanteperdrix@xenomai.org> wrote:
> On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
>> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
>>> Hello again:
>>>
>>> luke@domain.hid$ make ARCH=arm
>>> CROSS_COMPILE=arm-none-linux-gnueabi-
>>> ...
>>>  CC      arch/arm/kernel/fiq.o
>>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>>> make: *** [arch/arm/kernel] Error 2
>>> luke@domain.hid$
>>>
>>> This is how it looks like
>>> 80:void set_fiq_handler(void *start, unsigned int length)
>>> 81:{
>>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>>> 83:        memcpy((void *)0xffff001c, start, length);
>>> 84:#else
>>> 85:        memcpy(vectors_page + 0x1c, start, length);
>>> 86:#endif
>>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>>> 88:        if (!vectors_high())
>>> 89:                flush_icache_range(0x1c, 0x1c + length);
>>> 90:}
>>>
>>> Any ideas?
>>
>> Please take a look at this as this is piece of code the adeos i-pipe
>> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
>> modifies : in line 819.
>
> Please post your .config.
>
> --
>                                                                Gilles.
>
>

[-- Attachment #2: myconfig --]
[-- Type: application/octet-stream, Size: 48741 bytes --]

#
# Automatically generated make config: don't edit
# Linux/arm 2.6.38.8-ptx-2011.07.0 Kernel Configuration
# Tue Nov  1 15:52:58 2011
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FIQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
# CONFIG_GENERIC_PENDING_IRQ is not set
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
# CONFIG_TINY_RCU is not set
# CONFIG_TINY_PREEMPT_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set

#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_GENERIC_STACKPOOL=y
CONFIG_XENO_FASTSYNCH_DEP=y
CONFIG_XENO_FASTSYNCH=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
# CONFIG_XENO_OPT_SCHED_CLASSES is not set
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_MAP=y
CONFIG_XENO_OPT_VFILE=y
CONFIG_XENO_OPT_PIPE_NRDEV=32
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512
CONFIG_XENO_OPT_SYS_HEAPSZ=256
CONFIG_XENO_OPT_SYS_STACKPOOLSZ=128
CONFIG_XENO_OPT_SEM_HEAPSZ=12
CONFIG_XENO_OPT_GLOBAL_SEM_HEAPSZ=12
CONFIG_XENO_OPT_STATS=y
CONFIG_XENO_OPT_DEBUG=y
# CONFIG_XENO_OPT_DEBUG_NUCLEUS is not set
# CONFIG_XENO_OPT_DEBUG_XNLOCK is not set
# CONFIG_XENO_OPT_DEBUG_QUEUES is not set
# CONFIG_XENO_OPT_DEBUG_REGISTRY is not set
# CONFIG_XENO_OPT_DEBUG_TIMERS is not set
# CONFIG_XENO_OPT_DEBUG_SYNCH_RELAX is not set
CONFIG_XENO_OPT_WATCHDOG=y
CONFIG_XENO_OPT_WATCHDOG_TIMEOUT=4
# CONFIG_XENO_OPT_SHIRQ is not set
CONFIG_XENO_OPT_SELECT=y
CONFIG_XENO_OPT_HOSTRT=y

#
# Timing
#
# CONFIG_XENO_OPT_TIMING_PERIODIC is not set
CONFIG_XENO_OPT_TIMING_VIRTICK=1000
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0

#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set

#
# Machine
#
CONFIG_IPIPE_WANT_PREEMPTIBLE_SWITCH=y
CONFIG_XENO_HW_FPU=y
CONFIG_XENO_HW_UNLOCKED_SWITCH=y

#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=y
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_BUFFER=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
# CONFIG_XENO_OPT_NATIVE_INTR is not set
CONFIG_XENO_OPT_DEBUG_NATIVE=y
CONFIG_XENO_SKIN_POSIX=y
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
CONFIG_XENO_OPT_POSIX_SELECT=y
CONFIG_XENO_OPT_DEBUG_POSIX=y
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_OPT_NOWARN_DEPRECATED is not set
CONFIG_XENO_SKIN_RTDM=y
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128
CONFIG_XENO_OPT_RTDM_SELECT=y
# CONFIG_XENO_OPT_DEBUG_RTDM is not set
CONFIG_XENO_OPT_DEBUG_RTDM_APPL=y

#
# Drivers
#

#
# Serial drivers
#
CONFIG_XENO_DRIVERS_16550A=m
CONFIG_XENO_DRIVERS_16550A_PIO=y
# CONFIG_XENO_DRIVERS_16550A_MMIO is not set
# CONFIG_XENO_DRIVERS_16550A_ANY is not set

#
# Testing drivers
#
CONFIG_XENO_DRIVERS_TIMERBENCH=y
# CONFIG_XENO_DRIVERS_KLATENCY is not set
# CONFIG_XENO_DRIVERS_IRQBENCH is not set
CONFIG_XENO_DRIVERS_SWITCHTEST=y
# CONFIG_XENO_DRIVERS_RTDMTEST is not set

#
# CAN drivers
#
# CONFIG_XENO_DRIVERS_CAN is not set

#
# ANALOGY drivers
#
CONFIG_XENO_DRIVERS_ANALOGY=m
CONFIG_XENO_DRIVERS_ANALOGY_DEBUG=y
CONFIG_XENO_DRIVERS_ANALOGY_DEBUG_LEVEL=0
CONFIG_XENO_DRIVERS_ANALOGY_DRIVER_DEBUG_LEVEL=0
CONFIG_XENO_DRIVERS_ANALOGY_FAKE=m
CONFIG_XENO_DRIVERS_ANALOGY_8255=m
CONFIG_XENO_DRIVERS_ANALOGY_NI_TIO=m
CONFIG_XENO_DRIVERS_ANALOGY_S526=m

#
# Real-time IPC drivers
#
CONFIG_XENO_DRIVERS_RTIPC=m
CONFIG_XENO_DRIVERS_RTIPC_XDDP=y
CONFIG_XENO_DRIVERS_RTIPC_IDDP=y
CONFIG_XENO_OPT_IDDP_NRPORT=32
CONFIG_XENO_DRIVERS_RTIPC_BUFP=y
CONFIG_XENO_OPT_BUFP_NRPORT=32
# CONFIG_FREEZER is not set

#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_S5PV310 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_TCC_926 is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_PLAT_SAMSUNG=y

#
# Boot options
#
# CONFIG_S3C_BOOT_WATCHDOG is not set
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_PULL_UP=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_ADC=y
CONFIG_S3C_DEV_HWMON=y
CONFIG_S3C_DEV_USB_HOST=y
CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_NAND=y
CONFIG_S3C_DMA=y

#
# Power management
#

#
# Power Domain
#
CONFIG_PLAT_S3C24XX=y
CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
CONFIG_CPU_LLSERIAL_S3C2440=y
CONFIG_S3C2410_CLOCK=y
CONFIG_S3C24XX_PWM=y
CONFIG_S3C24XX_GPIO_EXTRA=0
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set

#
# System MMU
#

#
# S3C2400 Machines
#
CONFIG_S3C2410_GPIO=y

#
# S3C2410 Machines
#
# CONFIG_ARCH_SMDK2410 is not set
# CONFIG_ARCH_H1940 is not set
# CONFIG_MACH_N30 is not set
# CONFIG_ARCH_BAST is not set
# CONFIG_MACH_OTOM is not set
# CONFIG_MACH_AML_M5900 is not set
# CONFIG_MACH_TCT_HAMMER is not set
# CONFIG_MACH_VR1000 is not set
# CONFIG_MACH_QT2410 is not set

#
# S3C2412 Machines
#
# CONFIG_MACH_JIVE is not set
# CONFIG_MACH_SMDK2413 is not set
# CONFIG_MACH_SMDK2412 is not set
# CONFIG_MACH_VSTMS is not set

#
# S3C2416 Machines
#
# CONFIG_MACH_SMDK2416 is not set
CONFIG_CPU_S3C2440=y
CONFIG_CPU_S3C244X=y
CONFIG_S3C2440_DMA=y

#
# S3C2440 and S3C2442 Machines
#
# CONFIG_MACH_ANUBIS is not set
# CONFIG_MACH_NEO1973_GTA02 is not set
# CONFIG_MACH_OSIRIS is not set
# CONFIG_MACH_RX3715 is not set
# CONFIG_ARCH_S3C2440 is not set
# CONFIG_MACH_NEXCODER_2440 is not set
# CONFIG_SMDK2440_CPU2440 is not set
# CONFIG_SMDK2440_CPU2442 is not set
# CONFIG_MACH_AT2440EVB is not set
CONFIG_MACH_MINI2440=y
# CONFIG_MACH_RX1950 is not set

#
# S3C2443 Machines
#
# CONFIG_MACH_SMDK2443 is not set
CONFIG_IPIPE_ARM_KUSER_TSC=y

#
# Processor Type
#
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y

#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_FCSE is not set

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_DELAYED_ATOMICSW=y
# CONFIG_IPIPE_UNMASKED_CONTEXT_SWITCH is not set
CONFIG_HAVE_IPIPE_HOSTRT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=200
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set

#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set

#
# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_MUSEUM_IDS=y
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
CONFIG_MTD_NAND_S3C2410_HWECC=y
CONFIG_MTD_NAND_S3C2410_CLKSTOP=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IWMC3200TOP is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_MII=y
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=0
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set

#
# CAIF transport drivers
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_S3C2410=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_QT602240 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS=3
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C2440=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_HAVE_S3C2410_I2C=y
CONFIG_I2C_S3C2410=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_S3C24XX=y
CONFIG_SPI_S3C24XX_FIQ=y
# CONFIG_SPI_S3C24XX_GPIO is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_S3C=y
# CONFIG_SENSORS_S3C_RAW is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CANDO is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_EGALAX is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_R8A66597 is not set
CONFIG_USB_GADGET_S3C2410=y
CONFIG_USB_S3C2410=y
CONFIG_USB_S3C2410_DEBUG=y
# CONFIG_USB_GADGET_PXA_U2O is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FUNCTIONFS=m
# CONFIG_USB_FUNCTIONFS_ETH is not set
# CONFIG_USB_FUNCTIONFS_RNDIS is not set
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_FILE_STORAGE is not set
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
# CONFIG_USB_G_MULTI is not set
CONFIG_USB_G_HID=m
# CONFIG_USB_G_DBGP is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SPI is not set
CONFIG_MMC_S3C=y
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
# CONFIG_MMC_S3C_PIO is not set
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_S3C_PIODMA=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_S3C24XX=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_TIMB_DMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_IPIPE_DEBUG is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_BKL is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=0

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y

[-- Attachment #3: linux-2.6.38-patches.tar.gz --]
[-- Type: application/x-gzip, Size: 11215 bytes --]

Re: [Xenomai-help] kernel compilation error

[Gilles Chanteperdrix]

On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
>> Hello again:
>>
>> luke@domain.hid$ make ARCH=arm
>> CROSS_COMPILE=arm-none-linux-gnueabi-
>> ...
>>  CC      arch/arm/kernel/fiq.o
>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>> make: *** [arch/arm/kernel] Error 2
>> luke@domain.hid$
>>
>> This is how it looks like
>> 80:void set_fiq_handler(void *start, unsigned int length)
>> 81:{
>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>> 83:        memcpy((void *)0xffff001c, start, length);
>> 84:#else
>> 85:        memcpy(vectors_page + 0x1c, start, length);
>> 86:#endif
>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>> 88:        if (!vectors_high())
>> 89:                flush_icache_range(0x1c, 0x1c + length);
>> 90:}
>>
>> Any ideas?
> 
> Please take a look at this as this is piece of code the adeos i-pipe
> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
> modifies : in line 819.

Indeed, we need the definition of struct task_struct in 
asm/cacheflush.h, the following patch should help:
http://git.xenomai.org/?p=ipipe-gch.git;a=commitdiff;h=ca2793e18d538d07a648583c47d40fff405c4778;hp=e68e48bebdc551a534ecd6fdbd839eb9ee2637f7

A new patch will be out soon.

-- 
                                                                Gilles.

Re: [Xenomai-help] kernel compilation error

[Gilles Chanteperdrix]

On 11/02/2011 04:31 PM, Gilles Chanteperdrix wrote:
> On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
>> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
>>> Hello again:
>>>
>>> luke@domain.hid$ make ARCH=arm
>>> CROSS_COMPILE=arm-none-linux-gnueabi-
>>> ...
>>>  CC      arch/arm/kernel/fiq.o
>>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>>> make: *** [arch/arm/kernel] Error 2
>>> luke@domain.hid$
>>>
>>> This is how it looks like
>>> 80:void set_fiq_handler(void *start, unsigned int length)
>>> 81:{
>>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>>> 83:        memcpy((void *)0xffff001c, start, length);
>>> 84:#else
>>> 85:        memcpy(vectors_page + 0x1c, start, length);
>>> 86:#endif
>>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>>> 88:        if (!vectors_high())
>>> 89:                flush_icache_range(0x1c, 0x1c + length);
>>> 90:}
>>>
>>> Any ideas?
>>
>> Please take a look at this as this is piece of code the adeos i-pipe
>> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
>> modifies : in line 819.
> 
> Indeed, we need the definition of struct task_struct in 
> asm/cacheflush.h, the following patch should help:
> http://git.xenomai.org/?p=ipipe-gch.git;a=commitdiff;h=ca2793e18d538d07a648583c47d40fff405c4778;hp=e68e48bebdc551a534ecd6fdbd839eb9ee2637f7
> 
> A new patch will be out soon.
> 

Your configuration has FCSE disabled, enabling it improves latencies on
s3c processors.

-- 
                                                                Gilles.

Re: [Xenomai-help] kernel compilation error

[Łukasz Sacha]

On Wed, Nov 2, 2011 at 16:37, Gilles Chanteperdrix
<gilles.chanteperdrix@xenomai.org> wrote:
> On 11/02/2011 04:31 PM, Gilles Chanteperdrix wrote:
>> On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
>>> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
>>>> Hello again:
>>>>
>>>> luke@domain.hid$ make ARCH=arm
>>>> CROSS_COMPILE=arm-none-linux-gnueabi-
>>>> ...
>>>>  CC      arch/arm/kernel/fiq.o
>>>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>>>> make: *** [arch/arm/kernel] Error 2
>>>> luke@domain.hid$
>>>>
>>>> This is how it looks like
>>>> 80:void set_fiq_handler(void *start, unsigned int length)
>>>> 81:{
>>>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>>>> 83:        memcpy((void *)0xffff001c, start, length);
>>>> 84:#else
>>>> 85:        memcpy(vectors_page + 0x1c, start, length);
>>>> 86:#endif
>>>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>>>> 88:        if (!vectors_high())
>>>> 89:                flush_icache_range(0x1c, 0x1c + length);
>>>> 90:}
>>>>
>>>> Any ideas?
>>>
>>> Please take a look at this as this is piece of code the adeos i-pipe
>>> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
>>> modifies : in line 819.
>>
>> Indeed, we need the definition of struct task_struct in
>> asm/cacheflush.h, the following patch should help:
>> http://git.xenomai.org/?p=ipipe-gch.git;a=commitdiff;h=ca2793e18d538d07a648583c47d40fff405c4778;hp=e68e48bebdc551a534ecd6fdbd839eb9ee2637f7
>>
>> A new patch will be out soon.
>>
>
> Your configuration has FCSE disabled, enabling it improves latencies on
> s3c processors.

Thank you for the tip. Guaranteed (with preemptible cache flushes)  or
best-efford setting? My guess is the first one.

regards,
-- 
LS

Re: [Xenomai-help] kernel compilation error

[Łukasz Sacha]

On Thu, Nov 3, 2011 at 00:15, Łukasz Sacha <dragilla@domain.hid> wrote:
> On Wed, Nov 2, 2011 at 16:37, Gilles Chanteperdrix
> <gilles.chanteperdrix@xenomai.org> wrote:
>> On 11/02/2011 04:31 PM, Gilles Chanteperdrix wrote:
>>> On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
>>>> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
>>>>> Hello again:
>>>>>
>>>>> luke@domain.hid$ make ARCH=arm
>>>>> CROSS_COMPILE=arm-none-linux-gnueabi-
>>>>> ...
>>>>>  CC      arch/arm/kernel/fiq.o
>>>>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>>>>> make: *** [arch/arm/kernel] Error 2
>>>>> luke@domain.hid$
>>>>>
>>>>> This is how it looks like
>>>>> 80:void set_fiq_handler(void *start, unsigned int length)
>>>>> 81:{
>>>>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>>>>> 83:        memcpy((void *)0xffff001c, start, length);
>>>>> 84:#else
>>>>> 85:        memcpy(vectors_page + 0x1c, start, length);
>>>>> 86:#endif
>>>>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>>>>> 88:        if (!vectors_high())
>>>>> 89:                flush_icache_range(0x1c, 0x1c + length);
>>>>> 90:}
>>>>>
>>>>> Any ideas?
>>>>
>>>> Please take a look at this as this is piece of code the adeos i-pipe
>>>> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
>>>> modifies : in line 819.
>>>
>>> Indeed, we need the definition of struct task_struct in
>>> asm/cacheflush.h, the following patch should help:
>>> http://git.xenomai.org/?p=ipipe-gch.git;a=commitdiff;h=ca2793e18d538d07a648583c47d40fff405c4778;hp=e68e48bebdc551a534ecd6fdbd839eb9ee2637f7
>>>
>>> A new patch will be out soon.

I get two section mismatches compiling the kernel.
--- cut here ---

WARNING: arch/arm/mach-s3c2440/built-in.o(.text+0x8e0): Section
mismatch in reference from the function
mini2440_parse_features.clone.0() to the (unknown reference)
.init.data:(unknown)
The function mini2440_parse_features.clone.0() references
the (unknown reference) __initdata (unknown).
This is often because mini2440_parse_features.clone.0 lacks a __initdata
annotation or the annotation of (unknown) is wrong.

WARNING: arch/arm/mach-s3c2440/built-in.o(.data+0x184): Section
mismatch in reference from the variable s3c2440_dma_driver to the
function .init.text:s3c2440_dma_add()
The variable s3c2440_dma_driver references
the function __init s3c2440_dma_add()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
--- cut here ---

Is this something to worry about?

regards,
-- 
LS

Re: [Xenomai-help] kernel compilation error

[Łukasz Sacha]

On Thu, Nov 3, 2011 at 00:24, Łukasz Sacha <dragilla@domain.hid> wrote:
> On Thu, Nov 3, 2011 at 00:15, Łukasz Sacha <dragilla@domain.hid> wrote:
>> On Wed, Nov 2, 2011 at 16:37, Gilles Chanteperdrix
>> <gilles.chanteperdrix@xenomai.org> wrote:
>>> On 11/02/2011 04:31 PM, Gilles Chanteperdrix wrote:
>>>> On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
>>>>> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hid> wrote:
>>>>>> Hello again:
>>>>>>
>>>>>> luke@domain.hid$ make ARCH=arm
>>>>>> CROSS_COMPILE=arm-none-linux-gnueabi-
>>>>>> ...
>>>>>>  CC      arch/arm/kernel/fiq.o
>>>>>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>>>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>>>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>>>>>> make: *** [arch/arm/kernel] Error 2
>>>>>> luke@domain.hid$
>>>>>>
>>>>>> This is how it looks like
>>>>>> 80:void set_fiq_handler(void *start, unsigned int length)
>>>>>> 81:{
>>>>>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>>>>>> 83:        memcpy((void *)0xffff001c, start, length);
>>>>>> 84:#else
>>>>>> 85:        memcpy(vectors_page + 0x1c, start, length);
>>>>>> 86:#endif
>>>>>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>>>>>> 88:        if (!vectors_high())
>>>>>> 89:                flush_icache_range(0x1c, 0x1c + length);
>>>>>> 90:}
>>>>>>
>>>>>> Any ideas?
>>>>>
>>>>> Please take a look at this as this is piece of code the adeos i-pipe
>>>>> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
>>>>> modifies : in line 819.
>>>>
>>>> Indeed, we need the definition of struct task_struct in
>>>> asm/cacheflush.h, the following patch should help:
>>>> http://git.xenomai.org/?p=ipipe-gch.git;a=commitdiff;h=ca2793e18d538d07a648583c47d40fff405c4778;hp=e68e48bebdc551a534ecd6fdbd839eb9ee2637f7
>>>>
>>>> A new patch will be out soon.
>
> I get two section mismatches compiling the kernel.
> --- cut here ---
>
> WARNING: arch/arm/mach-s3c2440/built-in.o(.text+0x8e0): Section
> mismatch in reference from the function
> mini2440_parse_features.clone.0() to the (unknown reference)
> .init.data:(unknown)
> The function mini2440_parse_features.clone.0() references
> the (unknown reference) __initdata (unknown).
> This is often because mini2440_parse_features.clone.0 lacks a __initdata
> annotation or the annotation of (unknown) is wrong.
>
> WARNING: arch/arm/mach-s3c2440/built-in.o(.data+0x184): Section
> mismatch in reference from the variable s3c2440_dma_driver to the
> function .init.text:s3c2440_dma_add()
> The variable s3c2440_dma_driver references
> the function __init s3c2440_dma_add()
> If the reference is valid then annotate the
> variable with __init* or __refdata (see linux/init.h) or name the variable:
> *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
> --- cut here ---
>
> Is this something to worry about?
Actually there's more of this. Let me know if I should paste it here.

regards,
-- 
LS

Re: [Xenomai-help] kernel compilation error

[Gilles Chanteperdrix]

On 11/03/2011 12:31 AM, Łukasz Sacha wrote:
> On Thu, Nov 3, 2011 at 00:24, Łukasz Sacha <dragilla@domain.hid> wrote:
>> On Thu, Nov 3, 2011 at 00:15, Łukasz Sacha <dragilla@domain.hid> wrote:
>>> On Wed, Nov 2, 2011 at 16:37, Gilles Chanteperdrix
>>> <gilles.chanteperdrix@xenomai.org> wrote:
>>>> On 11/02/2011 04:31 PM, Gilles Chanteperdrix wrote:
>>>>> On 11/01/2011 01:42 PM, Łukasz Sacha wrote:
>>>>>> On Tue, Nov 1, 2011 at 12:34, Łukasz Sacha <dragilla@domain.hidm> wrote:
>>>>>>> Hello again:
>>>>>>>
>>>>>>> luke@domain.hid$ make ARCH=arm
>>>>>>> CROSS_COMPILE=arm-none-linux-gnueabi-
>>>>>>> ...
>>>>>>>  CC      arch/arm/kernel/fiq.o
>>>>>>> arch/arm/kernel/fiq.c: In function 'set_fiq_handler':
>>>>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>>>>> arch/arm/kernel/fiq.c:87: error: dereferencing pointer to incomplete type
>>>>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>>>>> arch/arm/kernel/fiq.c:89: error: dereferencing pointer to incomplete type
>>>>>>> make[1]: *** [arch/arm/kernel/fiq.o] Error 1
>>>>>>> make: *** [arch/arm/kernel] Error 2
>>>>>>> luke@domain.hid$
>>>>>>>
>>>>>>> This is how it looks like
>>>>>>> 80:void set_fiq_handler(void *start, unsigned int length)
>>>>>>> 81:{
>>>>>>> 82:#if defined(CONFIG_CPU_USE_DOMAINS)
>>>>>>> 83:        memcpy((void *)0xffff001c, start, length);
>>>>>>> 84:#else
>>>>>>> 85:        memcpy(vectors_page + 0x1c, start, length);
>>>>>>> 86:#endif
>>>>>>> 87:        flush_icache_range(0xffff001c, 0xffff001c + length);
>>>>>>> 88:        if (!vectors_high())
>>>>>>> 89:                flush_icache_range(0x1c, 0x1c + length);
>>>>>>> 90:}
>>>>>>>
>>>>>>> Any ideas?
>>>>>>
>>>>>> Please take a look at this as this is piece of code the adeos i-pipe
>>>>>> patch (./ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch)
>>>>>> modifies : in line 819.
>>>>>
>>>>> Indeed, we need the definition of struct task_struct in
>>>>> asm/cacheflush.h, the following patch should help:
>>>>> http://git.xenomai.org/?p=ipipe-gch.git;a=commitdiff;h=ca2793e18d538d07a648583c47d40fff405c4778;hp=e68e48bebdc551a534ecd6fdbd839eb9ee2637f7
>>>>>
>>>>> A new patch will be out soon.
>>
>> I get two section mismatches compiling the kernel.
>> --- cut here ---
>>
>> WARNING: arch/arm/mach-s3c2440/built-in.o(.text+0x8e0): Section
>> mismatch in reference from the function
>> mini2440_parse_features.clone.0() to the (unknown reference)
>> .init.data:(unknown)
>> The function mini2440_parse_features.clone.0() references
>> the (unknown reference) __initdata (unknown).
>> This is often because mini2440_parse_features.clone.0 lacks a __initdata
>> annotation or the annotation of (unknown) is wrong.
>>
>> WARNING: arch/arm/mach-s3c2440/built-in.o(.data+0x184): Section
>> mismatch in reference from the variable s3c2440_dma_driver to the
>> function .init.text:s3c2440_dma_add()
>> The variable s3c2440_dma_driver references
>> the function __init s3c2440_dma_add()
>> If the reference is valid then annotate the
>> variable with __init* or __refdata (see linux/init.h) or name the variable:
>> *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
>> --- cut here ---
>>
>> Is this something to worry about?
> Actually there's more of this. Let me know if I should paste it here.

These issues have nothing to do with xenomai.

-- 
                                                                Gilles.