All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org,
	Patrice Vilchez <patrice.vilchez@atmel.com>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: Re: [PATCH 1/3] ARM: AT91: Add platform data for the ADCs
Date: Wed, 30 Nov 2011 10:45:17 +0100	[thread overview]
Message-ID: <4ED5FB2D.5090900@atmel.com> (raw)
In-Reply-To: <1322644502-18160-2-git-send-email-maxime.ripard@free-electrons.com>

Hi Maxime,

On 11/30/2011 10:15 AM, Maxime Ripard :
> Cc: Patrice Vilchez<patrice.vilchez@atmel.com>
> Cc: Thomas Petazzoni<thomas.petazzoni@free-electrons.com>

"CC:" lines should not be located here: place them just *after*
"Signed-off-by:" and "Acked-by:" lines.

> Signed-off-by: Maxime Ripard<maxime.ripard@free-electrons.com>
> Acked-by: Jonathan Cameron<jic23@cam.ac.uk>
> Signed-off-by: Nicolas Ferre<nicolas.ferre@atmel.com>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD<plagnioj@jcrosoft.com>
> ---
>   include/linux/platform_data/at91_adc.h |   36 ++++++++++++++++++++++++++++++++
>   1 files changed, 36 insertions(+), 0 deletions(-)
>   create mode 100644 include/linux/platform_data/at91_adc.h
>
> diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
> new file mode 100644
> index 0000000..1e1813d
> --- /dev/null
> +++ b/include/linux/platform_data/at91_adc.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright (C) 2011 Free Electrons
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.

Can be shorten in:
"Licensed under GPLv2."
"Licensed under the GPL v2."
"License terms: GNU General Public License (GPL) version 2."

> + *
> + */
> +
> +#ifndef _AT91_ADC_H_
> +#define _AT91_ADC_H_
> +
> +struct at91_adc_data {
> +	/* ADC Clock as specified by the datasheet, in Hz. */
> +	unsigned int adc_clock;
> +	/*
> +	 * Global number of channels available (to specify which channels are
> +	 * indeed used on the board, see the channels_used bitmask).
> +	 */
> +	u8 num_channels;
> +	/* Channels in use on the board as a bitmask */
> +	unsigned long channels_used;
> +	/* Startup time of the ADC, in microseconds. */
> +	u8 startup_time;
> +	/* Reference voltage for the ADC in millivolts */
> +	unsigned short vref;
> +};
> +
> +extern void __init at91_add_device_adc(struct at91_adc_data *data);
> +
> +#endif

I think that now it is located at this generic directory, it can easily 
go mainline through IIO subsystem (patches 1 and 2/3): Jonathan, do you 
agree with this?

Best regards,
-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: AT91: Add platform data for the ADCs
Date: Wed, 30 Nov 2011 10:45:17 +0100	[thread overview]
Message-ID: <4ED5FB2D.5090900@atmel.com> (raw)
In-Reply-To: <1322644502-18160-2-git-send-email-maxime.ripard@free-electrons.com>

Hi Maxime,

On 11/30/2011 10:15 AM, Maxime Ripard :
> Cc: Patrice Vilchez<patrice.vilchez@atmel.com>
> Cc: Thomas Petazzoni<thomas.petazzoni@free-electrons.com>

"CC:" lines should not be located here: place them just *after*
"Signed-off-by:" and "Acked-by:" lines.

> Signed-off-by: Maxime Ripard<maxime.ripard@free-electrons.com>
> Acked-by: Jonathan Cameron<jic23@cam.ac.uk>
> Signed-off-by: Nicolas Ferre<nicolas.ferre@atmel.com>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD<plagnioj@jcrosoft.com>
> ---
>   include/linux/platform_data/at91_adc.h |   36 ++++++++++++++++++++++++++++++++
>   1 files changed, 36 insertions(+), 0 deletions(-)
>   create mode 100644 include/linux/platform_data/at91_adc.h
>
> diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
> new file mode 100644
> index 0000000..1e1813d
> --- /dev/null
> +++ b/include/linux/platform_data/at91_adc.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright (C) 2011 Free Electrons
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.

Can be shorten in:
"Licensed under GPLv2."
"Licensed under the GPL v2."
"License terms: GNU General Public License (GPL) version 2."

> + *
> + */
> +
> +#ifndef _AT91_ADC_H_
> +#define _AT91_ADC_H_
> +
> +struct at91_adc_data {
> +	/* ADC Clock as specified by the datasheet, in Hz. */
> +	unsigned int adc_clock;
> +	/*
> +	 * Global number of channels available (to specify which channels are
> +	 * indeed used on the board, see the channels_used bitmask).
> +	 */
> +	u8 num_channels;
> +	/* Channels in use on the board as a bitmask */
> +	unsigned long channels_used;
> +	/* Startup time of the ADC, in microseconds. */
> +	u8 startup_time;
> +	/* Reference voltage for the ADC in millivolts */
> +	unsigned short vref;
> +};
> +
> +extern void __init at91_add_device_adc(struct at91_adc_data *data);
> +
> +#endif

I think that now it is located at this generic directory, it can easily 
go mainline through IIO subsystem (patches 1 and 2/3): Jonathan, do you 
agree with this?

Best regards,
-- 
Nicolas Ferre

  reply	other threads:[~2011-11-30  9:45 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-30  9:14 [PATCH v11] AT91: Add a driver for the ADC Maxime Ripard
2011-11-30  9:14 ` Maxime Ripard
2011-11-30  9:15 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-30  9:15   ` Maxime Ripard
2011-11-30  9:45   ` Nicolas Ferre [this message]
2011-11-30  9:45     ` Nicolas Ferre
2011-11-30  9:15 ` [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver Maxime Ripard
2011-11-30  9:15   ` Maxime Ripard
2011-11-30 17:40   ` Arnd Bergmann
2011-11-30 17:40     ` Arnd Bergmann
2011-11-30  9:15 ` [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board Maxime Ripard
2011-11-30  9:15   ` Maxime Ripard
  -- strict thread matches above, loose matches on Subject: below --
2012-01-16 21:36 [PATCH RESEND v13] AT91: Add a driver for the ADC Maxime Ripard
2012-01-16 21:36 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2012-01-16 21:36   ` Maxime Ripard
2011-12-14 10:01 [PATCH v13] AT91: Add a driver for the ADC Maxime Ripard
2011-12-14 10:01 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-12-14 10:27   ` Alexander Stein
2011-12-14 10:27     ` Alexander Stein
2011-12-15 19:37     ` Maxime Ripard
2011-12-15 19:37       ` Maxime Ripard
2011-12-02 13:17 [PATCH v12] AT91: Add a driver for the ADC Maxime Ripard
2011-12-02 13:17 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-12-02 13:17   ` Maxime Ripard
2011-11-24 11:27 [PATCH v9] AT91: Add a driver for the ADC Maxime Ripard
2011-11-24 11:27 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-24 11:27   ` Maxime Ripard
2011-11-24 14:29   ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-24 14:29     ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-18 10:12 [PATCH v8] AT91: Add a driver for the ADC Maxime Ripard
2011-11-18 10:12 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-18 10:12   ` Maxime Ripard
2011-11-15 10:54 [PATCH v7] AT91: Add a driver for the ADC Maxime Ripard
2011-11-15 10:54 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-15 10:54   ` Maxime Ripard
2011-11-14 17:30 [PATCH v6] AT91: Add a driver for the ADC Maxime Ripard
2011-11-14 17:30 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-14 17:30   ` Maxime Ripard
2011-11-14 10:06 [PATCHv5] AT91: Add a driver for the ADC Maxime Ripard
2011-11-14 10:06 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-14 10:06   ` Maxime Ripard
2011-11-14 11:29   ` Nicolas Ferre
2011-11-14 11:29     ` Nicolas Ferre
2011-10-19 16:18 [PATCH] AT91: Add a driver for the ADC Maxime Ripard
2011-10-19 16:18 ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-10-19 16:18   ` Maxime Ripard
2011-11-03 10:11 ` [PATCHv2] AT91: Add a driver for the ADC Maxime Ripard
2011-11-03 10:11   ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-03 10:11     ` Maxime Ripard
2011-11-03 11:27     ` Linus Walleij
2011-11-03 11:27       ` Linus Walleij
2011-11-03 16:27       ` Maxime Ripard
2011-11-03 16:27         ` Maxime Ripard
2011-11-03 16:38         ` Linus Walleij
2011-11-03 18:05           ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-03 18:05             ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-04 10:27     ` Jonathan Cameron
2011-11-04 10:27       ` Jonathan Cameron
2011-11-04 10:36       ` Jonathan Cameron
2011-11-04 10:36         ` Jonathan Cameron
2011-11-04 10:34     ` Jonathan Cameron
2011-11-04 10:34       ` Jonathan Cameron
2011-11-04 15:22       ` Maxime Ripard
2011-11-04 16:28         ` Jonathan Cameron
2011-11-04 16:28           ` Jonathan Cameron
2011-11-07 16:08 ` [PATCHv3] AT91: Add a driver for the ADC Maxime Ripard
2011-11-07 16:08   ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-07 16:08     ` Maxime Ripard
2011-11-07 16:27     ` Jonathan Cameron
2011-11-07 16:27       ` Jonathan Cameron
2011-11-08 13:19     ` Thomas Petazzoni
2011-11-08 13:19       ` Thomas Petazzoni
2011-11-09 10:19 ` [PATCHv4] AT91: Add a driver for the ADC Maxime Ripard
2011-11-09 10:19   ` [PATCH 1/3] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-11-09 10:19     ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4ED5FB2D.5090900@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=jic23@cam.ac.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=patrice.vilchez@atmel.com \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.