From: Timur Tabi <timur@freescale.com>
To: Kumar Gala <kumar.gala@freescale.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 2/2] powerpc/85xx: add a 32-bit P1022DS device tree
Date: Mon, 5 Dec 2011 17:44:31 -0600 [thread overview]
Message-ID: <4EDD575F.6010006@freescale.com> (raw)
In-Reply-To: <D5BD2D7D-4549-42A7-8BA6-9B3C84DB5E85@freescale.com>
Kumar Gala wrote:
> look at how mpc8572ds handles 36b.dts we put common definitions in a shared file.
Ok, I've made those changes, but when I boot the kernel, I'm seeing this. Can you give me a clue as to what's wrong?
PCI: Probing PCI hardware
pci 0000:00:00.0: [1957:0110] type 1 class 0x000b20
pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01)
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:02:00.0: [1957:0110] type 1 class 0x000b20
pci 0001:02:00.0: ignoring class b20 (doesn't match header type 01)
pci 0001:02:00.0: supports D1 D2
pci 0001:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:02:00.0: PME# disabled
pci 0001:02:00.0: PCI bridge to [bus 03-ff]
pci 0002:04:00.0: [1957:0110] type 1 class 0x000b20
pci 0002:04:00.0: ignoring class b20 (doesn't match header type 01)
pci 0002:04:00.0: supports D1 D2
pci 0002:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:04:00.0: PME# disabled
pci 0002:05:00.0: [8086:10d3] type 0 class 0x000200
pci 0002:05:00.0: reg 10: [mem 0x80000000-0x8001ffff]
pci 0002:05:00.0: reg 14: [mem 0x80080000-0x800fffff]
pci 0002:05:00.0: reg 18: [io 0x1000-0x101f]
pci 0002:05:00.0: reg 1c: [mem 0x80100000-0x80103fff]
pci 0002:05:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0002:05:00.0: PME# supported from D0 D3hot D3cold
pci 0002:05:00.0: PME# disabled
pci 0002:04:00.0: PCI bridge to [bus 05-ff]
pci 0002:04:00.0: bridge window [mem 0x80000000-0x801fffff]
PCI: Cannot allocate resource region 0 of device 0002:05:00.0, will remap
PCI: Cannot allocate resource region 1 of device 0002:05:00.0, will remap
PCI: Cannot allocate resource region 3 of device 0002:05:00.0, will remap
PCI 0000:00 Cannot reserve Legacy IO [io 0xffbed000-0xffbedfff]
PCI 0001:02 Cannot reserve Legacy IO [io 0xffbdb000-0xffbdbfff]
PCI 0002:04 Cannot reserve Legacy IO [io 0xffbc9000-0xffbc9fff]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0: bridge window [io 0xffbed000-0xffbfcfff]
pci 0000:00:00.0: bridge window [mem 0xa0000000-0xbfffffff]
pci 0001:02:00.0: PCI bridge to [bus 03-03]
pci 0001:02:00.0: bridge window [io 0xffbdb000-0xffbeafff]
pci 0001:02:00.0: bridge window [mem 0xc0000000-0xdfffffff]
pci 0002:04:00.0: BAR 9: can't assign mem pref (size 0x100000)
pci 0002:05:00.0: BAR 1: assigned [mem 0x80000000-0x8007ffff]
pci 0002:05:00.0: BAR 1: set to [mem 0x80000000-0x8007ffff] (PCI address [0xe000
0000-0xe007ffff])
pci 0002:05:00.0: BAR 6: assigned [mem 0x80080000-0x800bffff pref]
pci 0002:05:00.0: BAR 0: assigned [mem 0x800c0000-0x800dffff]
pci 0002:05:00.0: BAR 0: set to [mem 0x800c0000-0x800dffff] (PCI address [0xe00c
0000-0xe00dffff])
pci 0002:05:00.0: BAR 3: assigned [mem 0x800e0000-0x800e3fff]
pci 0002:05:00.0: BAR 3: set to [mem 0x800e0000-0x800e3fff] (PCI address [0xe00e
0000-0xe00e3fff])
pci 0002:04:00.0: PCI bridge to [bus 05-05]
pci 0002:04:00.0: bridge window [io 0xffbc9000-0xffbd8fff]
pci 0002:04:00.0: bridge window [mem 0x80000000-0x9fffffff]
pci 0000:00:00.0: enabling device (0106 -> 0107)
pci 0001:02:00.0: enabling device (0106 -> 0107)
pci 0002:04:00.0: enabling device (0106 -> 0107)
pci_bus 0000:00: resource 0 [io 0xffbed000-0xffbfcfff]
pci_bus 0000:00: resource 1 [mem 0xa0000000-0xbfffffff]
pci_bus 0000:01: resource 0 [io 0xffbed000-0xffbfcfff]
pci_bus 0000:01: resource 1 [mem 0xa0000000-0xbfffffff]
pci_bus 0001:02: resource 0 [io 0xffbdb000-0xffbeafff]
pci_bus 0001:02: resource 1 [mem 0xc0000000-0xdfffffff]
pci_bus 0001:03: resource 0 [io 0xffbdb000-0xffbeafff]
pci_bus 0001:03: resource 1 [mem 0xc0000000-0xdfffffff]
pci_bus 0002:04: resource 0 [io 0xffbc9000-0xffbd8fff]
pci_bus 0002:04: resource 1 [mem 0x80000000-0x9fffffff]
pci_bus 0002:05: resource 0 [io 0xffbc9000-0xffbd8fff]
pci_bus 0002:05: resource 1 [mem 0x80000000-0x9fffffff]
--
Timur Tabi
Linux kernel developer at Freescale
prev parent reply other threads:[~2011-12-05 23:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-02 22:08 [PATCH 1/2] powerpc/85xx: fix localbus and PCI addresses in the P1022DS 36-bit device tree Timur Tabi
2011-12-02 22:08 ` [PATCH 2/2] powerpc/85xx: add a 32-bit P1022DS " Timur Tabi
2011-12-02 22:19 ` Scott Wood
2011-12-02 22:24 ` Timur Tabi
2011-12-02 22:34 ` Scott Wood
2011-12-02 23:41 ` Timur Tabi
2011-12-02 23:50 ` Scott Wood
2011-12-02 23:03 ` Kumar Gala
2011-12-05 23:44 ` Timur Tabi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EDD575F.6010006@freescale.com \
--to=timur@freescale.com \
--cc=kumar.gala@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.