Re: [Qemu-devel] [PATCH v3 00/14] ARM: Samsung Exynos4210-based boards support.

[Stefan Weil <sw@weilnetz.de>]

Am 12.12.2011 07:43, schrieb Evgeny Voevodin:
> This set of patches adds support for Samsung S5PC210-based boards NURI 
> and SMDKC210.
> Tested on Linux kernel v3.x series. Usage of "-smp 2" option is 
> reuired for now.
>
> Third version: Reverted hw/arm_gic.c modification. Added IRQ Gate to 
> Exynos4210
> board.
>
> Evgeny Voevodin (8):
> hw/sysbus.h: Increase maximum number of device IRQs.
> ARM: exynos4210: IRQ subsystem support.
> ARM: exynos4210: PWM support.
> hw/arm_boot.c: Add new secondary CPU bootloader.
> ARM: exynos4210: MCT support.
> hw/exynos4210.c: Boot secondary CPU.
> hw/lan9118: Add basic 16-bit mode support.
> hw/exynos4210.c: Add LAN support for SMDKC210.
>
> Maksim Kozlov (3):
> ARM: Samsung exynos4210-based boards emulation
> ARM: exynos4210: CMU support
> ARM: exynos4210: UART support
>
> Mitsyanko Igor (3):
> hw/sd.c, hw/sd.h: add receive ready query routine to SD/MMC API
> ARM: exynos4210: added SD/MMC host controller
> ARM: exynos4210: added display controller implementation
>
> Makefile.target | 3 +
> hw/arm-misc.h | 1 +
> hw/arm_boot.c | 22 +-
> hw/devices.h | 2 +-
> hw/exynos4210.c | 561 +++++++++++++++
> hw/exynos4210.h | 107 +++
> hw/exynos4210_cmu.c | 1146 ++++++++++++++++++++++++++++++
> hw/exynos4210_combiner.c | 385 ++++++++++
> hw/exynos4210_fimd.c | 1737 ++++++++++++++++++++++++++++++++++++++++++++++
> hw/exynos4210_gic.c | 510 ++++++++++++++
> hw/exynos4210_mct.c | 1486 +++++++++++++++++++++++++++++++++++++++
> hw/exynos4210_pwm.c | 433 ++++++++++++
> hw/exynos4210_sdhc.c | 1666 ++++++++++++++++++++++++++++++++++++++++++++
> hw/exynos4210_uart.c | 674 ++++++++++++++++++
> hw/lan9118.c | 115 +++-
> hw/sd.c | 5 +
> hw/sd.h | 1 +
> hw/sysbus.h | 2 +-
> 18 files changed, 8840 insertions(+), 16 deletions(-)
> create mode 100644 hw/exynos4210.c
> create mode 100644 hw/exynos4210.h
> create mode 100644 hw/exynos4210_cmu.c
> create mode 100644 hw/exynos4210_combiner.c
> create mode 100644 hw/exynos4210_fimd.c
> create mode 100644 hw/exynos4210_gic.c
> create mode 100644 hw/exynos4210_mct.c
> create mode 100644 hw/exynos4210_pwm.c
> create mode 100644 hw/exynos4210_sdhc.c
> create mode 100644 hw/exynos4210_uart.c

I did not review you patches, but noticed that they still include
the FSF address (which changed several times in the past):

    You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, 
Inc., 51
    Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

To avoid future address change modifications, most QEMU
code uses this statement in the license comments:

    You should have received a copy of the GNU General Public License
    along with this program; if not, see <http://www.gnu.org/licenses/>.

If a new version of your patches is needed, you might change that
as well.

Regards,
Stefan Weil