Re: brcmfmac + compat wireless + 2.6.35

["Franky Lin" <frankyl@broadcom.com>]

Hi Denis,

On 12/18/2011 03:33 AM, Denis 'GNUtoo' Carikli wrote:
> Hi,
> With the following patch instead of mine:
>    brcm80211: fmac: register a dummy irq handler for SDIO function 2
> it still fails the same way.

Indeed there is no big difference from yours. We tested it on X86 and 
OMAP panda board.

> I added that:
> #define BCMDBG                         1
> after:
>   #include "dhd_proto.h"
>   #include "dhd_dbg.h"
>   in:
> drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
> and:
> insmod brcmfmac.ko brcmf_msg_level=8192

Could you try to load the driver by insmod brcmfmac.ko 
brcmf_msg_level=0x7 and send me the log?

> But it wasn't more verbose so I added MMC debug and I got that:
>
> [  101.534177] mmc2: starting CMD52 arg 00205c00 flags 00000195
> [  101.534327] sdhci [sdhci_irq()]: *** mmc2 got interrupt: 0x00000001
> [  101.534411] mmc2: req done (CMD52): 0: 00001000 00000000 00000000 00000000
> [  101.534562] mmc2: starting CMD52 arg 00205e00 flags 00000195
> --- Then it blocks here ---

Looks like it hangs in the middle of downloading firmware.

Thanks,
Franky