From: "Andreas Färber" <afaerber@suse.de>
To: Anthony Liguori <aliguori@us.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH] build: fix target_phys_addr_t to 64-bit
Date: Thu, 12 Jan 2012 19:51:44 +0100 [thread overview]
Message-ID: <4F0F2BC0.4030605@suse.de> (raw)
In-Reply-To: <1326390853-1892-1-git-send-email-aliguori@us.ibm.com>
Am 12.01.2012 18:54, schrieb Anthony Liguori:
> This simplifies the build quite a bit and improves the builds performance by
> not rebuilding many objects twice.
>
> There were a surprising number of places that had assumed wrong things about the
> size of target_phys_addr_t including that it was fixed at 32-bit and that it
> was identical to target_ulong.
>
> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
> ---
> Makefile | 2 +-
> Makefile.hw | 25 --------
> Makefile.objs | 182 +++++++++++++++++++++++++++----------------------------
> Makefile.target | 4 -
> configure | 13 +----
> cpu-common.h | 8 ---
> dma.h | 2 -
> hw/a9mpcore.c | 4 +-
> hw/hw.h | 2 +-
> hw/intel-hda.c | 4 -
> hw/omap.h | 6 --
> hw/pxa2xx_dma.c | 6 +-
> hw/pxa2xx_lcd.c | 6 +-
> hw/rtl8139.c | 4 -
> hw/sh_serial.c | 6 +-
> monitor.c | 21 ------
> qemu-log.h | 4 +-
> targphys.h | 11 ---
> 18 files changed, 106 insertions(+), 204 deletions(-)
> delete mode 100644 Makefile.hw
> diff --git a/cpu-common.h b/cpu-common.h
> index a40c57d..85a3b35 100644
> --- a/cpu-common.h
> +++ b/cpu-common.h
> @@ -23,15 +21,9 @@ enum device_endian {
> };
>
> /* address in the RAM (different from a physical address) */
> -#if defined(CONFIG_XEN_BACKEND) && TARGET_PHYS_ADDR_BITS == 64
> typedef uint64_t ram_addr_t;
> # define RAM_ADDR_MAX UINT64_MAX
> # define RAM_ADDR_FMT "%" PRIx64
> -#else
> -typedef unsigned long ram_addr_t;
> -# define RAM_ADDR_MAX ULONG_MAX
> -# define RAM_ADDR_FMT "%lx"
> -#endif
$subject should mention ram_addr_t being changed as well.
> diff --git a/hw/pxa2xx_dma.c b/hw/pxa2xx_dma.c
> index cb28107..ffb391d 100644
> --- a/hw/pxa2xx_dma.c
> +++ b/hw/pxa2xx_dma.c
> @@ -512,9 +512,9 @@ static VMStateDescription vmstate_pxa2xx_dma_chan = {
> .minimum_version_id = 1,
> .minimum_version_id_old = 1,
> .fields = (VMStateField[]) {
> - VMSTATE_UINTTL(descr, PXA2xxDMAChannel),
> - VMSTATE_UINTTL(src, PXA2xxDMAChannel),
> - VMSTATE_UINTTL(dest, PXA2xxDMAChannel),
> + VMSTATE_UINT64(descr, PXA2xxDMAChannel),
> + VMSTATE_UINT64(src, PXA2xxDMAChannel),
> + VMSTATE_UINT64(dest, PXA2xxDMAChannel),
> VMSTATE_UINT32(cmd, PXA2xxDMAChannel),
> VMSTATE_UINT32(state, PXA2xxDMAChannel),
> VMSTATE_INT32(request, PXA2xxDMAChannel),
> diff --git a/hw/pxa2xx_lcd.c b/hw/pxa2xx_lcd.c
> index 5dd4ef0..a84cd77 100644
> --- a/hw/pxa2xx_lcd.c
> +++ b/hw/pxa2xx_lcd.c
> @@ -921,11 +921,11 @@ static const VMStateDescription vmstate_dma_channel = {
> .minimum_version_id = 0,
> .minimum_version_id_old = 0,
> .fields = (VMStateField[]) {
> - VMSTATE_UINTTL(branch, struct DMAChannel),
> + VMSTATE_UINT64(branch, struct DMAChannel),
> VMSTATE_UINT8(up, struct DMAChannel),
> VMSTATE_BUFFER(pbuffer, struct DMAChannel),
> - VMSTATE_UINTTL(descriptor, struct DMAChannel),
> - VMSTATE_UINTTL(source, struct DMAChannel),
> + VMSTATE_UINT64(descriptor, struct DMAChannel),
> + VMSTATE_UINT64(source, struct DMAChannel),
> VMSTATE_UINT32(id, struct DMAChannel),
> VMSTATE_UINT32(command, struct DMAChannel),
> VMSTATE_END_OF_LIST()
I'm pretty sure that PXA was 32-bit (arm), so version_id and
minimum_version_id need to be bumped.
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2012-01-12 18:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-12 17:54 [Qemu-devel] [PATCH] build: fix target_phys_addr_t to 64-bit Anthony Liguori
2012-01-12 18:51 ` Andreas Färber [this message]
2012-01-12 20:06 ` Peter Maydell
2012-01-12 20:32 ` Anthony Liguori
2012-01-12 22:42 ` Peter Maydell
2012-01-12 22:46 ` Peter Maydell
2012-01-12 22:56 ` Anthony Liguori
2012-01-12 23:29 ` Peter Maydell
2012-01-12 23:47 ` Andreas Färber
2012-01-13 1:13 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F0F2BC0.4030605@suse.de \
--to=afaerber@suse.de \
--cc=aliguori@us.ibm.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.