From: Rob Herring <robherring2@gmail.com>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC 1/2] irq_domain: Create common xlate functions that device drivers can use
Date: Tue, 24 Jan 2012 19:50:24 -0600 [thread overview]
Message-ID: <4F1F5FE0.9090901@gmail.com> (raw)
In-Reply-To: <1327450719-25590-1-git-send-email-grant.likely@secretlab.ca>
On 01/24/2012 06:18 PM, Grant Likely wrote:
> Rather than having each interrupt controller driver creating its own barely
> unique .xlate function for irq_domain, create a library of translators which
> any driver can use directly.
>
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>
> This builds on top of my irq_domain series and will be included with it when
> I post v3. Rob, does this serve your needs for generic irq controller DT
> support?
>
Yes, but comments below.
> g.
>
> include/linux/irqdomain.h | 15 ++++++++++
> kernel/irq/irqdomain.c | 69 +++++++++++++++++++++++++++++++++++++++-----
> 2 files changed, 76 insertions(+), 8 deletions(-)
>
> diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
> index e7379a3..5e497a0 100644
> --- a/include/linux/irqdomain.h
> +++ b/include/linux/irqdomain.h
> @@ -110,6 +110,9 @@ struct irq_domain {
> void *host_data;
> irq_hw_number_t inval_irq;
>
> + /* Data for common irq xlate functions */
> + unsigned int xlate_type;
> +
How does this get set? Do we want interrupt controllers messing with the
domain struct directly long term?
> /* Optional device node pointer */
> struct device_node *of_node;
> };
> @@ -163,6 +166,18 @@ extern unsigned int irq_linear_revmap(struct irq_domain *host,
> irq_hw_number_t hwirq);
>
> extern struct irq_domain_ops irq_domain_simple_ops;
> +
> +/* stock xlate functions */
> +int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +
> #if defined(CONFIG_OF_IRQ)
> extern void irq_domain_generate_simple(const struct of_device_id *match,
> u64 phys_base, unsigned int irq_start);
> diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
> index def8e7b..df80205 100644
> --- a/kernel/irq/irqdomain.c
> +++ b/kernel/irq/irqdomain.c
> @@ -53,6 +53,7 @@ static struct irq_domain *irq_domain_alloc(struct device_node *of_node,
> domain->ops = ops;
> domain->host_data = host_data;
> domain->of_node = of_node_get(of_node);
> + domain->xlate_type = IRQ_TYPE_NONE;
>
> if (domain->ops->match == NULL)
> domain->ops->match = default_irq_domain_match;
> @@ -690,25 +691,77 @@ int irq_domain_simple_map(struct irq_domain *d, unsigned int irq,
> return 0;
> }
>
> -int irq_domain_simple_xlate(struct irq_domain *d,
> - struct device_node *controller,
> - const u32 *intspec, unsigned int intsize,
> - unsigned long *out_hwirq, unsigned int *out_type)
> +/**
> + * irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with one cell
> + * bindings where the cell value maps directly to the hwirq number.
> + */
> +int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (WARN(intsize < 1, "Bad intspec for %s: intsize=%i < 1\n",
> + ctrlr->full_name, intsize))
> + return -EINVAL;
> + *out_hwirq = intspec[0];
> + *out_type = d->xlate_type;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);
> +
> +/**
> + * irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with two cell
> + * bindings where the cell values map directly to the hwirq number
> + * and linux irq flags.
> + */
> +int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type)
> {
> - if (d->of_node != controller)
> + if (WARN(intsize < 2, "Bad intspec for %s: intsize=%i < 2\n",
> + ctrlr->full_name, intsize))
> + return -EINVAL;
> + if (intsize < 2)
You've already checked this...
> return -EINVAL;
> - if (intsize < 1)
> + *out_hwirq = intspec[0];
> + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);
> +
> +/**
> + * irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with either one
> + * or two cell bindings where the cell values map directly to the hwirq number
> + * and linux irq flags.
> + *
> + * Note: don't use this function unless your interrupt controller explicitly
> + * supports both one and two cell bindings. For the majority of controllers
> + * the _onecell() or _twocell() variants above should be used.
This comment is confusing since you turn around and use it for simple
ops below.
> + */
> +int irq_domain_xlate_onetwocell(struct irq_domain *d,
> + struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (WARN(intsize < 1, "Bad intspec for %s: intsize=%i < 1\n",
> + ctrlr->full_name, intsize))
> return -EINVAL;
Isn't this check redundant with the check in of_irq_map_raw:
if (ointsize != intsize)
return -EINVAL;
The only diff in these functions is really checking the size. So I
really don't think we need 3 versions if that can be factored out where
you know value of #interrupt-cells.
Rob
> *out_hwirq = intspec[0];
> - *out_type = IRQ_TYPE_NONE;
> + *out_type = d->xlate_type;
> if (intsize > 1)
> *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
> return 0;
> }
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);
>
> struct irq_domain_ops irq_domain_simple_ops = {
> .map = irq_domain_simple_map,
> - .xlate = irq_domain_simple_xlate,
> + .xlate = irq_domain_xlate_onetwocell,
> };
> EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
>
WARNING: multiple messages have this Message-ID (diff)
From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 1/2] irq_domain: Create common xlate functions that device drivers can use
Date: Tue, 24 Jan 2012 19:50:24 -0600 [thread overview]
Message-ID: <4F1F5FE0.9090901@gmail.com> (raw)
In-Reply-To: <1327450719-25590-1-git-send-email-grant.likely@secretlab.ca>
On 01/24/2012 06:18 PM, Grant Likely wrote:
> Rather than having each interrupt controller driver creating its own barely
> unique .xlate function for irq_domain, create a library of translators which
> any driver can use directly.
>
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>
> This builds on top of my irq_domain series and will be included with it when
> I post v3. Rob, does this serve your needs for generic irq controller DT
> support?
>
Yes, but comments below.
> g.
>
> include/linux/irqdomain.h | 15 ++++++++++
> kernel/irq/irqdomain.c | 69 +++++++++++++++++++++++++++++++++++++++-----
> 2 files changed, 76 insertions(+), 8 deletions(-)
>
> diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
> index e7379a3..5e497a0 100644
> --- a/include/linux/irqdomain.h
> +++ b/include/linux/irqdomain.h
> @@ -110,6 +110,9 @@ struct irq_domain {
> void *host_data;
> irq_hw_number_t inval_irq;
>
> + /* Data for common irq xlate functions */
> + unsigned int xlate_type;
> +
How does this get set? Do we want interrupt controllers messing with the
domain struct directly long term?
> /* Optional device node pointer */
> struct device_node *of_node;
> };
> @@ -163,6 +166,18 @@ extern unsigned int irq_linear_revmap(struct irq_domain *host,
> irq_hw_number_t hwirq);
>
> extern struct irq_domain_ops irq_domain_simple_ops;
> +
> +/* stock xlate functions */
> +int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +
> #if defined(CONFIG_OF_IRQ)
> extern void irq_domain_generate_simple(const struct of_device_id *match,
> u64 phys_base, unsigned int irq_start);
> diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
> index def8e7b..df80205 100644
> --- a/kernel/irq/irqdomain.c
> +++ b/kernel/irq/irqdomain.c
> @@ -53,6 +53,7 @@ static struct irq_domain *irq_domain_alloc(struct device_node *of_node,
> domain->ops = ops;
> domain->host_data = host_data;
> domain->of_node = of_node_get(of_node);
> + domain->xlate_type = IRQ_TYPE_NONE;
>
> if (domain->ops->match == NULL)
> domain->ops->match = default_irq_domain_match;
> @@ -690,25 +691,77 @@ int irq_domain_simple_map(struct irq_domain *d, unsigned int irq,
> return 0;
> }
>
> -int irq_domain_simple_xlate(struct irq_domain *d,
> - struct device_node *controller,
> - const u32 *intspec, unsigned int intsize,
> - unsigned long *out_hwirq, unsigned int *out_type)
> +/**
> + * irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with one cell
> + * bindings where the cell value maps directly to the hwirq number.
> + */
> +int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (WARN(intsize < 1, "Bad intspec for %s: intsize=%i < 1\n",
> + ctrlr->full_name, intsize))
> + return -EINVAL;
> + *out_hwirq = intspec[0];
> + *out_type = d->xlate_type;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);
> +
> +/**
> + * irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with two cell
> + * bindings where the cell values map directly to the hwirq number
> + * and linux irq flags.
> + */
> +int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type)
> {
> - if (d->of_node != controller)
> + if (WARN(intsize < 2, "Bad intspec for %s: intsize=%i < 2\n",
> + ctrlr->full_name, intsize))
> + return -EINVAL;
> + if (intsize < 2)
You've already checked this...
> return -EINVAL;
> - if (intsize < 1)
> + *out_hwirq = intspec[0];
> + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);
> +
> +/**
> + * irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with either one
> + * or two cell bindings where the cell values map directly to the hwirq number
> + * and linux irq flags.
> + *
> + * Note: don't use this function unless your interrupt controller explicitly
> + * supports both one and two cell bindings. For the majority of controllers
> + * the _onecell() or _twocell() variants above should be used.
This comment is confusing since you turn around and use it for simple
ops below.
> + */
> +int irq_domain_xlate_onetwocell(struct irq_domain *d,
> + struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (WARN(intsize < 1, "Bad intspec for %s: intsize=%i < 1\n",
> + ctrlr->full_name, intsize))
> return -EINVAL;
Isn't this check redundant with the check in of_irq_map_raw:
if (ointsize != intsize)
return -EINVAL;
The only diff in these functions is really checking the size. So I
really don't think we need 3 versions if that can be factored out where
you know value of #interrupt-cells.
Rob
> *out_hwirq = intspec[0];
> - *out_type = IRQ_TYPE_NONE;
> + *out_type = d->xlate_type;
> if (intsize > 1)
> *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
> return 0;
> }
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);
>
> struct irq_domain_ops irq_domain_simple_ops = {
> .map = irq_domain_simple_map,
> - .xlate = irq_domain_simple_xlate,
> + .xlate = irq_domain_xlate_onetwocell,
> };
> EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robherring2@gmail.com>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [RFC 1/2] irq_domain: Create common xlate functions that device drivers can use
Date: Tue, 24 Jan 2012 19:50:24 -0600 [thread overview]
Message-ID: <4F1F5FE0.9090901@gmail.com> (raw)
In-Reply-To: <1327450719-25590-1-git-send-email-grant.likely@secretlab.ca>
On 01/24/2012 06:18 PM, Grant Likely wrote:
> Rather than having each interrupt controller driver creating its own barely
> unique .xlate function for irq_domain, create a library of translators which
> any driver can use directly.
>
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>
> This builds on top of my irq_domain series and will be included with it when
> I post v3. Rob, does this serve your needs for generic irq controller DT
> support?
>
Yes, but comments below.
> g.
>
> include/linux/irqdomain.h | 15 ++++++++++
> kernel/irq/irqdomain.c | 69 +++++++++++++++++++++++++++++++++++++++-----
> 2 files changed, 76 insertions(+), 8 deletions(-)
>
> diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
> index e7379a3..5e497a0 100644
> --- a/include/linux/irqdomain.h
> +++ b/include/linux/irqdomain.h
> @@ -110,6 +110,9 @@ struct irq_domain {
> void *host_data;
> irq_hw_number_t inval_irq;
>
> + /* Data for common irq xlate functions */
> + unsigned int xlate_type;
> +
How does this get set? Do we want interrupt controllers messing with the
domain struct directly long term?
> /* Optional device node pointer */
> struct device_node *of_node;
> };
> @@ -163,6 +166,18 @@ extern unsigned int irq_linear_revmap(struct irq_domain *host,
> irq_hw_number_t hwirq);
>
> extern struct irq_domain_ops irq_domain_simple_ops;
> +
> +/* stock xlate functions */
> +int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type);
> +
> #if defined(CONFIG_OF_IRQ)
> extern void irq_domain_generate_simple(const struct of_device_id *match,
> u64 phys_base, unsigned int irq_start);
> diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
> index def8e7b..df80205 100644
> --- a/kernel/irq/irqdomain.c
> +++ b/kernel/irq/irqdomain.c
> @@ -53,6 +53,7 @@ static struct irq_domain *irq_domain_alloc(struct device_node *of_node,
> domain->ops = ops;
> domain->host_data = host_data;
> domain->of_node = of_node_get(of_node);
> + domain->xlate_type = IRQ_TYPE_NONE;
>
> if (domain->ops->match == NULL)
> domain->ops->match = default_irq_domain_match;
> @@ -690,25 +691,77 @@ int irq_domain_simple_map(struct irq_domain *d, unsigned int irq,
> return 0;
> }
>
> -int irq_domain_simple_xlate(struct irq_domain *d,
> - struct device_node *controller,
> - const u32 *intspec, unsigned int intsize,
> - unsigned long *out_hwirq, unsigned int *out_type)
> +/**
> + * irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with one cell
> + * bindings where the cell value maps directly to the hwirq number.
> + */
> +int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (WARN(intsize < 1, "Bad intspec for %s: intsize=%i < 1\n",
> + ctrlr->full_name, intsize))
> + return -EINVAL;
> + *out_hwirq = intspec[0];
> + *out_type = d->xlate_type;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);
> +
> +/**
> + * irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with two cell
> + * bindings where the cell values map directly to the hwirq number
> + * and linux irq flags.
> + */
> +int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + irq_hw_number_t *out_hwirq, unsigned int *out_type)
> {
> - if (d->of_node != controller)
> + if (WARN(intsize < 2, "Bad intspec for %s: intsize=%i < 2\n",
> + ctrlr->full_name, intsize))
> + return -EINVAL;
> + if (intsize < 2)
You've already checked this...
> return -EINVAL;
> - if (intsize < 1)
> + *out_hwirq = intspec[0];
> + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);
> +
> +/**
> + * irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
> + *
> + * Device Tree IRQ specifier translation function which works with either one
> + * or two cell bindings where the cell values map directly to the hwirq number
> + * and linux irq flags.
> + *
> + * Note: don't use this function unless your interrupt controller explicitly
> + * supports both one and two cell bindings. For the majority of controllers
> + * the _onecell() or _twocell() variants above should be used.
This comment is confusing since you turn around and use it for simple
ops below.
> + */
> +int irq_domain_xlate_onetwocell(struct irq_domain *d,
> + struct device_node *ctrlr,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (WARN(intsize < 1, "Bad intspec for %s: intsize=%i < 1\n",
> + ctrlr->full_name, intsize))
> return -EINVAL;
Isn't this check redundant with the check in of_irq_map_raw:
if (ointsize != intsize)
return -EINVAL;
The only diff in these functions is really checking the size. So I
really don't think we need 3 versions if that can be factored out where
you know value of #interrupt-cells.
Rob
> *out_hwirq = intspec[0];
> - *out_type = IRQ_TYPE_NONE;
> + *out_type = d->xlate_type;
> if (intsize > 1)
> *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
> return 0;
> }
> +EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);
>
> struct irq_domain_ops irq_domain_simple_ops = {
> .map = irq_domain_simple_map,
> - .xlate = irq_domain_simple_xlate,
> + .xlate = irq_domain_xlate_onetwocell,
> };
> EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
>
next prev parent reply other threads:[~2012-01-25 1:50 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-25 0:18 [RFC 1/2] irq_domain: Create common xlate functions that device drivers can use Grant Likely
2012-01-25 0:18 ` Grant Likely
2012-01-25 0:18 ` Grant Likely
2012-01-25 0:18 ` [RFC 2/2] irqdomain/powerpc: Replace custom xlate functions with library functions Grant Likely
2012-01-25 0:18 ` Grant Likely
2012-01-25 1:50 ` Rob Herring [this message]
2012-01-25 1:50 ` [RFC 1/2] irq_domain: Create common xlate functions that device drivers can use Rob Herring
2012-01-25 1:50 ` Rob Herring
2012-01-25 5:35 ` Grant Likely
2012-01-25 5:35 ` Grant Likely
2012-01-25 5:35 ` Grant Likely
2012-01-25 17:59 ` Grant Likely
2012-01-25 17:59 ` Grant Likely
2012-01-25 17:59 ` Grant Likely
2012-01-26 14:50 ` Rob Herring
2012-01-26 14:50 ` Rob Herring
2012-01-26 14:50 ` Rob Herring
2012-01-26 18:15 ` Grant Likely
2012-01-26 18:15 ` Grant Likely
2012-01-26 18:15 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F1F5FE0.9090901@gmail.com \
--to=robherring2@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.