* [PATCH] mpc8315: build u-boot by default.
@ 2012-01-27 16:22 Paul Gortmaker
2012-01-27 17:11 ` Darren Hart
0 siblings, 1 reply; 4+ messages in thread
From: Paul Gortmaker @ 2012-01-27 16:22 UTC (permalink / raw)
To: yocto
Valdiated on v2011.12 with hardware:
U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz
Board: Freescale MPC8315ERDB Rev 1.0
I2C: ready
DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz)
Flash: 8 MiB
NAND: 32 MiB
PCIE0: No link
PCIE1: No link
In: serial
Out: serial
Err: serial
Net: eTSEC0, eTSEC1
Hit any key to stop autoboot: 0
=> ver
U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease)
GNU ld (GNU Binutils) 2.22
=>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf b/meta-yocto/conf/machine/mpc8315e-rdb.conf
index d3a5b1c..74ef611 100644
--- a/meta-yocto/conf/machine/mpc8315e-rdb.conf
+++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf
@@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc
KERNEL_IMAGETYPE = "uImage"
+EXTRA_IMAGEDEPENDS += "u-boot"
+UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config"
+
SERIAL_CONSOLE = "115200 ttyS0"
MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial"
--
1.7.7
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] mpc8315: build u-boot by default.
2012-01-27 16:22 [PATCH] mpc8315: build u-boot by default Paul Gortmaker
@ 2012-01-27 17:11 ` Darren Hart
2012-01-27 17:40 ` Paul Gortmaker
0 siblings, 1 reply; 4+ messages in thread
From: Darren Hart @ 2012-01-27 17:11 UTC (permalink / raw)
To: Paul Gortmaker; +Cc: yocto
On 01/27/2012 08:22 AM, Paul Gortmaker wrote:
> Valdiated on v2011.12 with hardware:
>
> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
>
> Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
>
> CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz
> Board: Freescale MPC8315ERDB Rev 1.0
> I2C: ready
> DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz)
> Flash: 8 MiB
> NAND: 32 MiB
> PCIE0: No link
> PCIE1: No link
> In: serial
> Out: serial
> Err: serial
> Net: eTSEC0, eTSEC1
> Hit any key to stop autoboot: 0
> => ver
>
> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
> powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease)
> GNU ld (GNU Binutils) 2.22
> =>
>
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Hi Paul,
Have you verified that the u-boot image this creates functions properly
when flashed to the mpc8315? Last time I tried I bricked the board - and
still haven't got around to unbricking it.
--
Darren
>
> diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf b/meta-yocto/conf/machine/mpc8315e-rdb.conf
> index d3a5b1c..74ef611 100644
> --- a/meta-yocto/conf/machine/mpc8315e-rdb.conf
> +++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf
> @@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc
>
> KERNEL_IMAGETYPE = "uImage"
>
> +EXTRA_IMAGEDEPENDS += "u-boot"
> +UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config"
> +
> SERIAL_CONSOLE = "115200 ttyS0"
>
> MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial"
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mpc8315: build u-boot by default.
2012-01-27 17:11 ` Darren Hart
@ 2012-01-27 17:40 ` Paul Gortmaker
2012-01-29 19:41 ` Darren Hart
0 siblings, 1 reply; 4+ messages in thread
From: Paul Gortmaker @ 2012-01-27 17:40 UTC (permalink / raw)
To: Darren Hart; +Cc: yocto
On 12-01-27 12:11 PM, Darren Hart wrote:
>
>
> On 01/27/2012 08:22 AM, Paul Gortmaker wrote:
>> Valdiated on v2011.12 with hardware:
>>
>> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
>>
>> Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
>>
>> CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz
>> Board: Freescale MPC8315ERDB Rev 1.0
>> I2C: ready
>> DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz)
>> Flash: 8 MiB
>> NAND: 32 MiB
>> PCIE0: No link
>> PCIE1: No link
>> In: serial
>> Out: serial
>> Err: serial
>> Net: eTSEC0, eTSEC1
>> Hit any key to stop autoboot: 0
>> => ver
>>
>> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
>> powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease)
>> GNU ld (GNU Binutils) 2.22
>> =>
>>
>> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
>
> Hi Paul,
>
> Have you verified that the u-boot image this creates functions properly
> when flashed to the mpc8315? Last time I tried I bricked the board - and
Was there a specific functional test that you had in mind?
I ask that, since for a basic overall "does it work" type question,
I think I covered that in the commit log above.
Thanks,
Paul.
> still haven't got around to unbricking it.
>
> --
> Darren
>
>>
>> diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf b/meta-yocto/conf/machine/mpc8315e-rdb.conf
>> index d3a5b1c..74ef611 100644
>> --- a/meta-yocto/conf/machine/mpc8315e-rdb.conf
>> +++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf
>> @@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc
>>
>> KERNEL_IMAGETYPE = "uImage"
>>
>> +EXTRA_IMAGEDEPENDS += "u-boot"
>> +UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config"
>> +
>> SERIAL_CONSOLE = "115200 ttyS0"
>>
>> MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial"
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mpc8315: build u-boot by default.
2012-01-27 17:40 ` Paul Gortmaker
@ 2012-01-29 19:41 ` Darren Hart
0 siblings, 0 replies; 4+ messages in thread
From: Darren Hart @ 2012-01-29 19:41 UTC (permalink / raw)
To: Paul Gortmaker; +Cc: yocto
On 01/27/2012 09:40 AM, Paul Gortmaker wrote:
> On 12-01-27 12:11 PM, Darren Hart wrote:
>>
>>
>> On 01/27/2012 08:22 AM, Paul Gortmaker wrote:
>>> Valdiated on v2011.12 with hardware:
>>>
>>> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
>>>
>>> Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
>>>
>>> CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz
>>> Board: Freescale MPC8315ERDB Rev 1.0
>>> I2C: ready
>>> DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz)
>>> Flash: 8 MiB
>>> NAND: 32 MiB
>>> PCIE0: No link
>>> PCIE1: No link
>>> In: serial
>>> Out: serial
>>> Err: serial
>>> Net: eTSEC0, eTSEC1
>>> Hit any key to stop autoboot: 0
>>> => ver
>>>
>>> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
>>> powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease)
>>> GNU ld (GNU Binutils) 2.22
>>> =>
>>>
>>> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
>>
>> Hi Paul,
>>
>> Have you verified that the u-boot image this creates functions properly
>> when flashed to the mpc8315? Last time I tried I bricked the board - and
>
> Was there a specific functional test that you had in mind?
>
> I ask that, since for a basic overall "does it work" type question,
> I think I covered that in the commit log above.
Ah, duh. Sorry. Must. Read. More. Carefully.
Acked-by: Darren Hart <dvhart@linux.intel.com>
>
> Thanks,
> Paul.
>
>
>> still haven't got around to unbricking it.
>>
>> --
>> Darren
>>
>>>
>>> diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf b/meta-yocto/conf/machine/mpc8315e-rdb.conf
>>> index d3a5b1c..74ef611 100644
>>> --- a/meta-yocto/conf/machine/mpc8315e-rdb.conf
>>> +++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf
>>> @@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc
>>>
>>> KERNEL_IMAGETYPE = "uImage"
>>>
>>> +EXTRA_IMAGEDEPENDS += "u-boot"
>>> +UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config"
>>> +
>>> SERIAL_CONSOLE = "115200 ttyS0"
>>>
>>> MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial"
>>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-01-29 19:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-01-27 16:22 [PATCH] mpc8315: build u-boot by default Paul Gortmaker
2012-01-27 17:11 ` Darren Hart
2012-01-27 17:40 ` Paul Gortmaker
2012-01-29 19:41 ` Darren Hart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.